mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 21:54:06 +08:00
541cace8cd
Implement the test modes mentioned in 7.1.20 section of USB 2.0 specification. High-speed capable devices must support these test modes to facilitate compliance testing. Signed-off-by: Pavankumar Kondeti <pkondeti@codeaurora.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
228 lines
7.4 KiB
C
228 lines
7.4 KiB
C
/*
|
|
* ci13xxx_udc.h - structures, registers, and macros MIPS USB IP core
|
|
*
|
|
* Copyright (C) 2008 Chipidea - MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
* Author: David Lopo
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* Description: MIPS USB IP core family device controller
|
|
* Structures, registers and logging macros
|
|
*/
|
|
|
|
#ifndef _CI13XXX_h_
|
|
#define _CI13XXX_h_
|
|
|
|
/******************************************************************************
|
|
* DEFINE
|
|
*****************************************************************************/
|
|
#define CI13XXX_PAGE_SIZE 4096ul /* page size for TD's */
|
|
#define ENDPT_MAX (32)
|
|
#define CTRL_PAYLOAD_MAX (64)
|
|
#define RX (0) /* similar to USB_DIR_OUT but can be used as an index */
|
|
#define TX (1) /* similar to USB_DIR_IN but can be used as an index */
|
|
|
|
/******************************************************************************
|
|
* STRUCTURES
|
|
*****************************************************************************/
|
|
/* DMA layout of transfer descriptors */
|
|
struct ci13xxx_td {
|
|
/* 0 */
|
|
u32 next;
|
|
#define TD_TERMINATE BIT(0)
|
|
#define TD_ADDR_MASK (0xFFFFFFEUL << 5)
|
|
/* 1 */
|
|
u32 token;
|
|
#define TD_STATUS (0x00FFUL << 0)
|
|
#define TD_STATUS_TR_ERR BIT(3)
|
|
#define TD_STATUS_DT_ERR BIT(5)
|
|
#define TD_STATUS_HALTED BIT(6)
|
|
#define TD_STATUS_ACTIVE BIT(7)
|
|
#define TD_MULTO (0x0003UL << 10)
|
|
#define TD_IOC BIT(15)
|
|
#define TD_TOTAL_BYTES (0x7FFFUL << 16)
|
|
/* 2 */
|
|
u32 page[5];
|
|
#define TD_CURR_OFFSET (0x0FFFUL << 0)
|
|
#define TD_FRAME_NUM (0x07FFUL << 0)
|
|
#define TD_RESERVED_MASK (0x0FFFUL << 0)
|
|
} __attribute__ ((packed));
|
|
|
|
/* DMA layout of queue heads */
|
|
struct ci13xxx_qh {
|
|
/* 0 */
|
|
u32 cap;
|
|
#define QH_IOS BIT(15)
|
|
#define QH_MAX_PKT (0x07FFUL << 16)
|
|
#define QH_ZLT BIT(29)
|
|
#define QH_MULT (0x0003UL << 30)
|
|
/* 1 */
|
|
u32 curr;
|
|
/* 2 - 8 */
|
|
struct ci13xxx_td td;
|
|
/* 9 */
|
|
u32 RESERVED;
|
|
struct usb_ctrlrequest setup;
|
|
} __attribute__ ((packed));
|
|
|
|
/* Extension of usb_request */
|
|
struct ci13xxx_req {
|
|
struct usb_request req;
|
|
unsigned map;
|
|
struct list_head queue;
|
|
struct ci13xxx_td *ptr;
|
|
dma_addr_t dma;
|
|
struct ci13xxx_td *zptr;
|
|
dma_addr_t zdma;
|
|
};
|
|
|
|
/* Extension of usb_ep */
|
|
struct ci13xxx_ep {
|
|
struct usb_ep ep;
|
|
const struct usb_endpoint_descriptor *desc;
|
|
u8 dir;
|
|
u8 num;
|
|
u8 type;
|
|
char name[16];
|
|
struct {
|
|
struct list_head queue;
|
|
struct ci13xxx_qh *ptr;
|
|
dma_addr_t dma;
|
|
} qh;
|
|
int wedge;
|
|
|
|
/* global resources */
|
|
spinlock_t *lock;
|
|
struct device *device;
|
|
struct dma_pool *td_pool;
|
|
};
|
|
|
|
struct ci13xxx;
|
|
struct ci13xxx_udc_driver {
|
|
const char *name;
|
|
unsigned long flags;
|
|
#define CI13XXX_REGS_SHARED BIT(0)
|
|
#define CI13XXX_REQUIRE_TRANSCEIVER BIT(1)
|
|
#define CI13XXX_PULLUP_ON_VBUS BIT(2)
|
|
#define CI13XXX_DISABLE_STREAMING BIT(3)
|
|
|
|
#define CI13XXX_CONTROLLER_RESET_EVENT 0
|
|
#define CI13XXX_CONTROLLER_STOPPED_EVENT 1
|
|
void (*notify_event) (struct ci13xxx *udc, unsigned event);
|
|
};
|
|
|
|
/* CI13XXX UDC descriptor & global resources */
|
|
struct ci13xxx {
|
|
spinlock_t *lock; /* ctrl register bank access */
|
|
void __iomem *regs; /* registers address space */
|
|
|
|
struct dma_pool *qh_pool; /* DMA pool for queue heads */
|
|
struct dma_pool *td_pool; /* DMA pool for transfer descs */
|
|
struct usb_request *status; /* ep0 status request */
|
|
|
|
struct usb_gadget gadget; /* USB slave device */
|
|
struct ci13xxx_ep ci13xxx_ep[ENDPT_MAX]; /* extended endpts */
|
|
u32 ep0_dir; /* ep0 direction */
|
|
#define ep0out ci13xxx_ep[0]
|
|
#define ep0in ci13xxx_ep[16]
|
|
u8 remote_wakeup; /* Is remote wakeup feature
|
|
enabled by the host? */
|
|
u8 suspended; /* suspended by the host */
|
|
u8 test_mode; /* the selected test mode */
|
|
|
|
struct usb_gadget_driver *driver; /* 3rd party gadget driver */
|
|
struct ci13xxx_udc_driver *udc_driver; /* device controller driver */
|
|
int vbus_active; /* is VBUS active */
|
|
struct otg_transceiver *transceiver; /* Transceiver struct */
|
|
};
|
|
|
|
/******************************************************************************
|
|
* REGISTERS
|
|
*****************************************************************************/
|
|
/* register size */
|
|
#define REG_BITS (32)
|
|
|
|
/* HCCPARAMS */
|
|
#define HCCPARAMS_LEN BIT(17)
|
|
|
|
/* DCCPARAMS */
|
|
#define DCCPARAMS_DEN (0x1F << 0)
|
|
#define DCCPARAMS_DC BIT(7)
|
|
|
|
/* TESTMODE */
|
|
#define TESTMODE_FORCE BIT(0)
|
|
|
|
/* USBCMD */
|
|
#define USBCMD_RS BIT(0)
|
|
#define USBCMD_RST BIT(1)
|
|
#define USBCMD_SUTW BIT(13)
|
|
#define USBCMD_ATDTW BIT(14)
|
|
|
|
/* USBSTS & USBINTR */
|
|
#define USBi_UI BIT(0)
|
|
#define USBi_UEI BIT(1)
|
|
#define USBi_PCI BIT(2)
|
|
#define USBi_URI BIT(6)
|
|
#define USBi_SLI BIT(8)
|
|
|
|
/* DEVICEADDR */
|
|
#define DEVICEADDR_USBADRA BIT(24)
|
|
#define DEVICEADDR_USBADR (0x7FUL << 25)
|
|
|
|
/* PORTSC */
|
|
#define PORTSC_FPR BIT(6)
|
|
#define PORTSC_SUSP BIT(7)
|
|
#define PORTSC_HSP BIT(9)
|
|
#define PORTSC_PTC (0x0FUL << 16)
|
|
|
|
/* DEVLC */
|
|
#define DEVLC_PSPD (0x03UL << 25)
|
|
#define DEVLC_PSPD_HS (0x02UL << 25)
|
|
|
|
/* USBMODE */
|
|
#define USBMODE_CM (0x03UL << 0)
|
|
#define USBMODE_CM_IDLE (0x00UL << 0)
|
|
#define USBMODE_CM_DEVICE (0x02UL << 0)
|
|
#define USBMODE_CM_HOST (0x03UL << 0)
|
|
#define USBMODE_SLOM BIT(3)
|
|
#define USBMODE_SDIS BIT(4)
|
|
|
|
/* ENDPTCTRL */
|
|
#define ENDPTCTRL_RXS BIT(0)
|
|
#define ENDPTCTRL_RXT (0x03UL << 2)
|
|
#define ENDPTCTRL_RXR BIT(6) /* reserved for port 0 */
|
|
#define ENDPTCTRL_RXE BIT(7)
|
|
#define ENDPTCTRL_TXS BIT(16)
|
|
#define ENDPTCTRL_TXT (0x03UL << 18)
|
|
#define ENDPTCTRL_TXR BIT(22) /* reserved for port 0 */
|
|
#define ENDPTCTRL_TXE BIT(23)
|
|
|
|
/******************************************************************************
|
|
* LOGGING
|
|
*****************************************************************************/
|
|
#define ci13xxx_printk(level, format, args...) \
|
|
do { \
|
|
if (_udc == NULL) \
|
|
printk(level "[%s] " format "\n", __func__, ## args); \
|
|
else \
|
|
dev_printk(level, _udc->gadget.dev.parent, \
|
|
"[%s] " format "\n", __func__, ## args); \
|
|
} while (0)
|
|
|
|
#define err(format, args...) ci13xxx_printk(KERN_ERR, format, ## args)
|
|
#define warn(format, args...) ci13xxx_printk(KERN_WARNING, format, ## args)
|
|
#define info(format, args...) ci13xxx_printk(KERN_INFO, format, ## args)
|
|
|
|
#ifdef TRACE
|
|
#define trace(format, args...) ci13xxx_printk(KERN_DEBUG, format, ## args)
|
|
#define dbg_trace(format, args...) dev_dbg(dev, format, ##args)
|
|
#else
|
|
#define trace(format, args...) do {} while (0)
|
|
#define dbg_trace(format, args...) do {} while (0)
|
|
#endif
|
|
|
|
#endif /* _CI13XXX_h_ */
|