mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 22:24:09 +08:00
10ecacd794
Since autodetection of this chip was removed, it makes sense to add prefix max6635 so that the device can be instantiated by its actual name. Signed-off-by: Alvaro Gamez Machado <alvaro.gamez@hazent.com> Reviewed-by: Jean Delvare <jdelvare@suse.de> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
36 lines
1.1 KiB
Plaintext
36 lines
1.1 KiB
Plaintext
Kernel driver lm92
|
|
==================
|
|
|
|
Supported chips:
|
|
* National Semiconductor LM92
|
|
Prefix: 'lm92'
|
|
Addresses scanned: I2C 0x48 - 0x4b
|
|
Datasheet: http://www.national.com/pf/LM/LM92.html
|
|
* National Semiconductor LM76
|
|
Prefix: 'lm92'
|
|
Addresses scanned: none, force parameter needed
|
|
Datasheet: http://www.national.com/pf/LM/LM76.html
|
|
* Maxim MAX6633/MAX6634/MAX6635
|
|
Prefix: 'max6635'
|
|
Addresses scanned: none, force parameter needed
|
|
Datasheet: http://www.maxim-ic.com/quick_view2.cfm/qv_pk/3074
|
|
|
|
Authors:
|
|
Abraham van der Merwe <abraham@2d3d.co.za>
|
|
Jean Delvare <jdelvare@suse.de>
|
|
|
|
|
|
Description
|
|
-----------
|
|
|
|
This driver implements support for the National Semiconductor LM92
|
|
temperature sensor.
|
|
|
|
Each LM92 temperature sensor supports a single temperature sensor. There are
|
|
alarms for high, low, and critical thresholds. There's also an hysteresis to
|
|
control the thresholds for resetting alarms.
|
|
|
|
Support was added later for the LM76 and Maxim MAX6633/MAX6634/MAX6635,
|
|
which are mostly compatible. They have not all been tested, so you
|
|
may need to use the force parameter.
|