2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 04:03:58 +08:00
linux-next/drivers/iio
Benjamin Gaignard 4adec7da05 iio: stm32 trigger: Add quadrature encoder device
One of the features of STM32 trigger hardware block is a quadrature
encoder that can counts up/down depending of the levels and edges
of the selected external pins.

This patch allow to read/write the counter, get it direction,
set/get quadrature modes and get scale factor.

When counting up preset value is the limit of the counter.
When counting down the counter start from preset value down to 0.
This preset value could be set/get by using
/sys/bus/iio/devices/iio:deviceX/in_count0_preset attribute.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Reviewed-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>
2017-04-14 15:08:31 +01:00
..
accel iio: accel: mma7660: Add OF device ID table 2017-03-19 10:58:28 +00:00
adc iio: adc: add a driver for Qualcomm PM8xxx HK/XOADC 2017-04-08 17:42:26 +01:00
amplifiers spi: Updates for v4.4 2015-11-05 13:15:12 -08:00
buffer iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
chemical drivers: iio: chemical: replace comma with a semicolon 2017-03-30 19:13:23 +01:00
common iio: hid-sensor: Fix unbalanced pm_runtime_enable error 2017-04-08 15:36:47 +01:00
counter iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option 2017-03-15 21:59:08 +00:00
dac iio: dac: ad5504: Remove unnecessary cast on void pointer 2017-04-02 09:48:50 +01:00
dummy iio:dummy: Stop enabling timestamp by default. 2017-01-10 19:54:55 +00:00
frequency iio: frequency: ad9523: use unsigned int rather then bare unsigned 2016-04-17 10:31:03 +01:00
gyro iio: gyro: mpu3050: stop double error reporting 2017-04-03 20:40:51 +01:00
health First set of IIO new device support, features and cleanup for the 4.12 cycle. 2017-03-06 13:17:21 +01:00
humidity iio: humidity: hts221: Remove unnecessary cast on void pointer 2017-04-02 09:50:32 +01:00
imu iio: imu: st_lsm6dsx: use i2c/spi device name for iio_dev name 2017-04-08 18:09:40 +01:00
light iio: light: lm3533-als: constify attribute_group structures 2017-04-02 09:08:55 +01:00
magnetometer Merge 4.11-rc4 into staging-next 2017-03-27 09:11:25 +02:00
orientation iio: orientation: hid-sensor-rotation: Add PM function (fix non working driver) 2016-11-05 17:47:47 +00:00
potentiometer iio: max5481: Add support for Maxim digital potentiometers 2017-01-28 12:13:31 +00:00
potentiostat iio: lmp91000: Set parent device 2017-02-19 12:01:52 +00:00
pressure iio: pressure: zpa2326: Remove unnecessary cast on void pointer 2017-04-02 09:52:18 +01:00
proximity iio: proximity: as3935: constify attribute_group structures 2017-04-01 11:26:10 +01:00
temperature iio: mlx96014: Add OF device ID table 2017-03-19 10:49:24 +00:00
trigger iio: stm32 trigger: Add quadrature encoder device 2017-04-14 15:08:31 +01:00
iio_core_trigger.h
iio_core.h iio:core: timestamping clock selection support 2016-06-30 19:41:38 +01:00
industrialio-buffer.c sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h> 2017-03-02 08:42:32 +01:00
industrialio-configfs.c iio:configfs: Introduce iio/configfs.h to provide a location for the configfs_subsystem 2015-12-05 16:25:30 +00:00
industrialio-core.c iio:buffer.h - split into buffer.h and buffer_impl.h 2017-01-10 19:54:55 +00:00
industrialio-event.c iio: iio_push_event(): Don't crash if the event interface is not registered 2016-09-10 16:40:44 +01:00
industrialio-sw-device.c iio: Add support for creating IIO devices via configfs 2016-05-04 11:43:54 +01:00
industrialio-sw-trigger.c iio: core: fix ptr_ret.cocci warnings 2016-01-20 17:09:18 -08:00
industrialio-trigger.c iio: trigger: clean up viio_trigger_alloc() 2017-01-22 13:37:34 +00:00
industrialio-triggered-event.c iio: Support triggered events 2015-08-27 20:47:09 +01:00
inkern.c iio: inkern: pass through raw values if no scaling 2017-01-14 12:20:18 +00:00
Kconfig iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00
Makefile iio: 104-quad-8: Add IIO support for the ACCES 104-QUAD-8 2016-10-01 17:06:21 +01:00