renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Code
4a41f453be
linux-next/include/video/newport.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

585 lines
19 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/* $Id: newport.h,v 1.5 1999/08/04 06:01:51 ulfc Exp $
*
* newport.h: Defines and register layout for NEWPORT graphics
* hardware.
*
* Copyright (C) 1996 David S. Miller (davem@davemloft.net)
*
* Ulf Carlsson - Compatibility with the IRIX structures added
*/
#ifndef _SGI_NEWPORT_H
#define _SGI_NEWPORT_H
typedef volatile unsigned int npireg_t;
union npfloat {
volatile float flt;
npireg_t word;
};
typedef union npfloat npfreg_t;
union np_dcb {
npireg_t byword;
struct { volatile unsigned short s0, s1; } byshort;
struct { volatile unsigned char b0, b1, b2, b3; } bybytes;
};
struct newport_rexregs {
npireg_t drawmode1; /* GL extra mode bits */
#define DM1_PLANES 0x00000007
#define DM1_NOPLANES 0x00000000
#define DM1_RGBPLANES 0x00000001
#define DM1_RGBAPLANES 0x00000002
#define DM1_OLAYPLANES 0x00000004
#define DM1_PUPPLANES 0x00000005
#define DM1_CIDPLANES 0x00000006
#define NPORT_DMODE1_DDMASK 0x00000018
#define NPORT_DMODE1_DD4 0x00000000
#define NPORT_DMODE1_DD8 0x00000008
#define NPORT_DMODE1_DD12 0x00000010
#define NPORT_DMODE1_DD24 0x00000018
#define NPORT_DMODE1_DSRC 0x00000020
#define NPORT_DMODE1_YFLIP 0x00000040
#define NPORT_DMODE1_RWPCKD 0x00000080
#define NPORT_DMODE1_HDMASK 0x00000300
#define NPORT_DMODE1_HD4 0x00000000
#define NPORT_DMODE1_HD8 0x00000100
#define NPORT_DMODE1_HD12 0x00000200
#define NPORT_DMODE1_HD32 0x00000300
#define NPORT_DMODE1_RWDBL 0x00000400
#define NPORT_DMODE1_ESWAP 0x00000800 /* Endian swap */
#define NPORT_DMODE1_CCMASK 0x00007000
#define NPORT_DMODE1_CCLT 0x00001000
#define NPORT_DMODE1_CCEQ 0x00002000
#define NPORT_DMODE1_CCGT 0x00004000
#define NPORT_DMODE1_RGBMD 0x00008000
#define NPORT_DMODE1_DENAB 0x00010000 /* Dither enable */
#define NPORT_DMODE1_FCLR 0x00020000 /* Fast clear */
#define NPORT_DMODE1_BENAB 0x00040000 /* Blend enable */
#define NPORT_DMODE1_SFMASK 0x00380000
#define NPORT_DMODE1_SF0 0x00000000
#define NPORT_DMODE1_SF1 0x00080000
#define NPORT_DMODE1_SFDC 0x00100000
#define NPORT_DMODE1_SFMDC 0x00180000
#define NPORT_DMODE1_SFSA 0x00200000
#define NPORT_DMODE1_SFMSA 0x00280000
#define NPORT_DMODE1_DFMASK 0x01c00000
#define NPORT_DMODE1_DF0 0x00000000
#define NPORT_DMODE1_DF1 0x00400000
#define NPORT_DMODE1_DFSC 0x00800000
#define NPORT_DMODE1_DFMSC 0x00c00000
#define NPORT_DMODE1_DFSA 0x01000000
#define NPORT_DMODE1_DFMSA 0x01400000
#define NPORT_DMODE1_BBENAB 0x02000000 /* Back blend enable */
#define NPORT_DMODE1_PFENAB 0x04000000 /* Pre-fetch enable */
#define NPORT_DMODE1_ABLEND 0x08000000 /* Alpha blend */
#define NPORT_DMODE1_LOMASK 0xf0000000
#define NPORT_DMODE1_LOZERO 0x00000000
#define NPORT_DMODE1_LOAND 0x10000000
#define NPORT_DMODE1_LOANDR 0x20000000
#define NPORT_DMODE1_LOSRC 0x30000000
#define NPORT_DMODE1_LOANDI 0x40000000
#define NPORT_DMODE1_LODST 0x50000000
#define NPORT_DMODE1_LOXOR 0x60000000
#define NPORT_DMODE1_LOOR 0x70000000
#define NPORT_DMODE1_LONOR 0x80000000
#define NPORT_DMODE1_LOXNOR 0x90000000
#define NPORT_DMODE1_LONDST 0xa0000000
#define NPORT_DMODE1_LOORR 0xb0000000
#define NPORT_DMODE1_LONSRC 0xc0000000
#define NPORT_DMODE1_LOORI 0xd0000000
#define NPORT_DMODE1_LONAND 0xe0000000
#define NPORT_DMODE1_LOONE 0xf0000000
npireg_t drawmode0; /* REX command register */
/* These bits define the graphics opcode being performed. */
#define NPORT_DMODE0_OPMASK 0x00000003 /* Opcode mask */
#define NPORT_DMODE0_NOP 0x00000000 /* No operation */
#define NPORT_DMODE0_RD 0x00000001 /* Read operation */
#define NPORT_DMODE0_DRAW 0x00000002 /* Draw operation */
#define NPORT_DMODE0_S2S 0x00000003 /* Screen to screen operation */
/* The following decide what addressing mode(s) are to be used */
#define NPORT_DMODE0_AMMASK 0x0000001c /* Address mode mask */
#define NPORT_DMODE0_SPAN 0x00000000 /* Spanning address mode */
#define NPORT_DMODE0_BLOCK 0x00000004 /* Block address mode */
#define NPORT_DMODE0_ILINE 0x00000008 /* Iline address mode */
#define NPORT_DMODE0_FLINE 0x0000000c /* Fline address mode */
#define NPORT_DMODE0_ALINE 0x00000010 /* Aline address mode */
#define NPORT_DMODE0_TLINE 0x00000014 /* Tline address mode */
#define NPORT_DMODE0_BLINE 0x00000018 /* Bline address mode */
/* And now some misc. operation control bits. */
#define NPORT_DMODE0_DOSETUP 0x00000020
#define NPORT_DMODE0_CHOST 0x00000040
#define NPORT_DMODE0_AHOST 0x00000080
#define NPORT_DMODE0_STOPX 0x00000100
#define NPORT_DMODE0_STOPY 0x00000200
#define NPORT_DMODE0_SK1ST 0x00000400
#define NPORT_DMODE0_SKLST 0x00000800
#define NPORT_DMODE0_ZPENAB 0x00001000
#define NPORT_DMODE0_LISPENAB 0x00002000
#define NPORT_DMODE0_LISLST 0x00004000
#define NPORT_DMODE0_L32 0x00008000
#define NPORT_DMODE0_ZOPQ 0x00010000
#define NPORT_DMODE0_LISOPQ 0x00020000
#define NPORT_DMODE0_SHADE 0x00040000
#define NPORT_DMODE0_LRONLY 0x00080000
#define NPORT_DMODE0_XYOFF 0x00100000
#define NPORT_DMODE0_CLAMP 0x00200000
#define NPORT_DMODE0_ENDPF 0x00400000
#define NPORT_DMODE0_YSTR 0x00800000
npireg_t lsmode; /* Mode for line stipple ops */
npireg_t lspattern; /* Pattern for line stipple ops */
npireg_t lspatsave; /* Backup save pattern */
npireg_t zpattern; /* Pixel zpattern */
npireg_t colorback; /* Background color */
npireg_t colorvram; /* Clear color for fast vram */
npireg_t alpharef; /* Reference value for afunctions */
unsigned int pad0;
npireg_t smask0x; /* Window GL relative screen mask 0 */
npireg_t smask0y; /* Window GL relative screen mask 0 */
npireg_t _setup;
npireg_t _stepz;
npireg_t _lsrestore;
npireg_t _lssave;
unsigned int _pad1[0x30];
/* Iterators, full state for context switch */
npfreg_t _xstart; /* X-start point (current) */
npfreg_t _ystart; /* Y-start point (current) */
npfreg_t _xend; /* x-end point */
npfreg_t _yend; /* y-end point */
npireg_t xsave; /* copy of xstart integer value for BLOCk addressing MODE */
npireg_t xymove; /* x.y offset from xstart, ystart for relative operations */
npfreg_t bresd;
npfreg_t bress1;
npireg_t bresoctinc1;
volatile int bresrndinc2;
npireg_t brese1;
npireg_t bress2;
npireg_t aweight0;
npireg_t aweight1;
npfreg_t xstartf;
npfreg_t ystartf;
npfreg_t xendf;
npfreg_t yendf;
npireg_t xstarti;
npfreg_t xendf1;
npireg_t xystarti;
npireg_t xyendi;
npireg_t xstartendi;
unsigned int _unused2[0x29];
npfreg_t colorred;
npfreg_t coloralpha;
npfreg_t colorgrn;
npfreg_t colorblue;
npfreg_t slopered;
npfreg_t slopealpha;
npfreg_t slopegrn;
npfreg_t slopeblue;
npireg_t wrmask;
npireg_t colori;
npfreg_t colorx;
npfreg_t slopered1;
npireg_t hostrw0;
npireg_t hostrw1;
npireg_t dcbmode;
#define NPORT_DMODE_WMASK 0x00000003
#define NPORT_DMODE_W4 0x00000000
#define NPORT_DMODE_W1 0x00000001
#define NPORT_DMODE_W2 0x00000002
#define NPORT_DMODE_W3 0x00000003
#define NPORT_DMODE_EDPACK 0x00000004
#define NPORT_DMODE_ECINC 0x00000008
#define NPORT_DMODE_CMASK 0x00000070
#define NPORT_DMODE_AMASK 0x00000780
#define NPORT_DMODE_AVC2 0x00000000
#define NPORT_DMODE_ACMALL 0x00000080
#define NPORT_DMODE_ACM0 0x00000100
#define NPORT_DMODE_ACM1 0x00000180
#define NPORT_DMODE_AXMALL 0x00000200
#define NPORT_DMODE_AXM0 0x00000280
#define NPORT_DMODE_AXM1 0x00000300
#define NPORT_DMODE_ABT 0x00000380
#define NPORT_DMODE_AVCC1 0x00000400
#define NPORT_DMODE_AVAB1 0x00000480
#define NPORT_DMODE_ALG3V0 0x00000500
#define NPORT_DMODE_A1562 0x00000580
#define NPORT_DMODE_ESACK 0x00000800
#define NPORT_DMODE_EASACK 0x00001000
#define NPORT_DMODE_CWMASK 0x0003e000
#define NPORT_DMODE_CHMASK 0x007c0000
#define NPORT_DMODE_CSMASK 0x0f800000
#define NPORT_DMODE_SENDIAN 0x10000000
unsigned int _unused3;
union np_dcb dcbdata0;
npireg_t dcbdata1;
};
struct newport_cregs {
npireg_t smask1x;
npireg_t smask1y;
npireg_t smask2x;
npireg_t smask2y;
npireg_t smask3x;
npireg_t smask3y;
npireg_t smask4x;
npireg_t smask4y;
npireg_t topscan;
npireg_t xywin;
npireg_t clipmode;
#define NPORT_CMODE_SM0 0x00000001
#define NPORT_CMODE_SM1 0x00000002
#define NPORT_CMODE_SM2 0x00000004
#define NPORT_CMODE_SM3 0x00000008
#define NPORT_CMODE_SM4 0x00000010
#define NPORT_CMODE_CMSK 0x00001e00
unsigned int _unused0;
unsigned int config;
#define NPORT_CFG_G32MD 0x00000001
#define NPORT_CFG_BWIDTH 0x00000002
#define NPORT_CFG_ERCVR 0x00000004
#define NPORT_CFG_BDMSK 0x00000078
#define NPORT_CFG_BFAINT 0x00000080
#define NPORT_CFG_GDMSK 0x00001f80
#define NPORT_CFG_GD0 0x00000100
#define NPORT_CFG_GD1 0x00000200
#define NPORT_CFG_GD2 0x00000400
#define NPORT_CFG_GD3 0x00000800
#define NPORT_CFG_GD4 0x00001000
#define NPORT_CFG_GFAINT 0x00002000
#define NPORT_CFG_TOMSK 0x0001c000
#define NPORT_CFG_VRMSK 0x000e0000
#define NPORT_CFG_FBTYP 0x00100000
npireg_t _unused1;
npireg_t status;
#define NPORT_STAT_VERS 0x00000007
#define NPORT_STAT_GBUSY 0x00000008
#define NPORT_STAT_BBUSY 0x00000010
#define NPORT_STAT_VRINT 0x00000020
#define NPORT_STAT_VIDINT 0x00000040
#define NPORT_STAT_GLMSK 0x00001f80
#define NPORT_STAT_BLMSK 0x0007e000
#define NPORT_STAT_BFIRQ 0x00080000
#define NPORT_STAT_GFIRQ 0x00100000
npireg_t ustatus;
npireg_t dcbreset;
};
struct newport_regs {
struct newport_rexregs set;
unsigned int _unused0[0x16e];
struct newport_rexregs go;
unsigned int _unused1[0x22e];
struct newport_cregs cset;
unsigned int _unused2[0x1ef];
struct newport_cregs cgo;
};
typedef struct {
unsigned int drawmode1;
unsigned int drawmode0;
unsigned int lsmode;
unsigned int lspattern;
unsigned int lspatsave;
unsigned int zpattern;
unsigned int colorback;
unsigned int colorvram;
unsigned int alpharef;
unsigned int smask0x;
unsigned int smask0y;
unsigned int _xstart;
unsigned int _ystart;
unsigned int _xend;
unsigned int _yend;
unsigned int xsave;
unsigned int xymove;
unsigned int bresd;
unsigned int bress1;
unsigned int bresoctinc1;
unsigned int bresrndinc2;
unsigned int brese1;
unsigned int bress2;
unsigned int aweight0;
unsigned int aweight1;
unsigned int colorred;
unsigned int coloralpha;
unsigned int colorgrn;
unsigned int colorblue;
unsigned int slopered;
unsigned int slopealpha;
unsigned int slopegrn;
unsigned int slopeblue;
unsigned int wrmask;
unsigned int hostrw0;
unsigned int hostrw1;
/* configregs */
unsigned int smask1x;
unsigned int smask1y;
unsigned int smask2x;
unsigned int smask2y;
unsigned int smask3x;
unsigned int smask3y;
unsigned int smask4x;
unsigned int smask4y;
unsigned int topscan;
unsigned int xywin;
unsigned int clipmode;
unsigned int config;
/* dcb registers */
unsigned int dcbmode;
unsigned int dcbdata0;
unsigned int dcbdata1;
} newport_ctx;
/* Reading/writing VC2 registers. */
#define VC2_REGADDR_INDEX 0x00000000
#define VC2_REGADDR_IREG 0x00000010
#define VC2_REGADDR_RAM 0x00000030
#define VC2_PROTOCOL (NPORT_DMODE_EASACK | 0x00800000 | 0x00040000)
#define VC2_VLINET_ADDR 0x000
#define VC2_VFRAMET_ADDR 0x400
#define VC2_CGLYPH_ADDR 0x500
/* Now the Indexed registers of the VC2. */
#define VC2_IREG_VENTRY 0x00
#define VC2_IREG_CENTRY 0x01
#define VC2_IREG_CURSX 0x02
#define VC2_IREG_CURSY 0x03
#define VC2_IREG_CCURSX 0x04
#define VC2_IREG_DENTRY 0x05
#define VC2_IREG_SLEN 0x06
#define VC2_IREG_RADDR 0x07
#define VC2_IREG_VFPTR 0x08
#define VC2_IREG_VLSPTR 0x09
#define VC2_IREG_VLIR 0x0a
#define VC2_IREG_VLCTR 0x0b
#define VC2_IREG_CTPTR 0x0c
#define VC2_IREG_WCURSY 0x0d
#define VC2_IREG_DFPTR 0x0e
#define VC2_IREG_DLTPTR 0x0f
#define VC2_IREG_CONTROL 0x10
#define VC2_IREG_CONFIG 0x20
static inline void newport_vc2_set(struct newport_regs *regs,
unsigned char vc2ireg,
unsigned short val)
{
regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W3 |
NPORT_DMODE_ECINC | VC2_PROTOCOL);
regs->set.dcbdata0.byword = (vc2ireg << 24) | (val << 8);
}
static inline unsigned short newport_vc2_get(struct newport_regs *regs,
unsigned char vc2ireg)
{
regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_INDEX | NPORT_DMODE_W1 |
NPORT_DMODE_ECINC | VC2_PROTOCOL);
regs->set.dcbdata0.bybytes.b3 = vc2ireg;
regs->set.dcbmode = (NPORT_DMODE_AVC2 | VC2_REGADDR_IREG | NPORT_DMODE_W2 |
NPORT_DMODE_ECINC | VC2_PROTOCOL);
return regs->set.dcbdata0.byshort.s1;
}
/* VC2 Control register bits */
#define VC2_CTRL_EVIRQ 0x0001
#define VC2_CTRL_EDISP 0x0002
#define VC2_CTRL_EVIDEO 0x0004
#define VC2_CTRL_EDIDS 0x0008
#define VC2_CTRL_ECURS 0x0010
#define VC2_CTRL_EGSYNC 0x0020
#define VC2_CTRL_EILACE 0x0040
#define VC2_CTRL_ECDISP 0x0080
#define VC2_CTRL_ECCURS 0x0100
#define VC2_CTRL_ECG64 0x0200
#define VC2_CTRL_GLSEL 0x0400
/* Controlling the color map on NEWPORT. */
#define NCMAP_REGADDR_AREG 0x00000000
#define NCMAP_REGADDR_ALO 0x00000000
#define NCMAP_REGADDR_AHI 0x00000010
#define NCMAP_REGADDR_PBUF 0x00000020
#define NCMAP_REGADDR_CREG 0x00000030
#define NCMAP_REGADDR_SREG 0x00000040
#define NCMAP_REGADDR_RREG 0x00000060
#define NCMAP_PROTOCOL (0x00008000 | 0x00040000 | 0x00800000)
static __inline__ void newport_cmap_setaddr(struct newport_regs *regs,
unsigned short addr)
{
regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
NPORT_DMODE_SENDIAN | NPORT_DMODE_ECINC |
NCMAP_REGADDR_AREG | NPORT_DMODE_W2);
regs->set.dcbdata0.byshort.s1 = addr;
regs->set.dcbmode = (NPORT_DMODE_ACMALL | NCMAP_PROTOCOL |
NCMAP_REGADDR_PBUF | NPORT_DMODE_W3);
}
static __inline__ void newport_cmap_setrgb(struct newport_regs *regs,
unsigned char red,
unsigned char green,
unsigned char blue)
{
regs->set.dcbdata0.byword =
(red << 24) |
(green << 16) |
(blue << 8);
}
/* Miscellaneous NEWPORT routines. */
#define BUSY_TIMEOUT 100000
static __inline__ int newport_wait(struct newport_regs *regs)
{
int t = BUSY_TIMEOUT;
while (--t)
if (!(regs->cset.status & NPORT_STAT_GBUSY))
break;
return !t;
}
static __inline__ int newport_bfwait(struct newport_regs *regs)
{
int t = BUSY_TIMEOUT;
while (--t)
if(!(regs->cset.status & NPORT_STAT_BBUSY))
break;
return !t;
}
/*
* DCBMODE register defines:
*/
/* Width of the data being transferred for each DCBDATA[01] word */
#define DCB_DATAWIDTH_4 0x0
#define DCB_DATAWIDTH_1 0x1
#define DCB_DATAWIDTH_2 0x2
#define DCB_DATAWIDTH_3 0x3
/* If set, all of DCBDATA will be moved, otherwise only DATAWIDTH bytes */
#define DCB_ENDATAPACK (1 << 2)
/* Enables DCBCRS auto increment after each DCB transfer */
#define DCB_ENCRSINC (1 << 3)
/* shift for accessing the control register select address (DBCCRS, 3 bits) */
#define DCB_CRS_SHIFT 4
/* DCBADDR (4 bits): display bus slave address */
#define DCB_ADDR_SHIFT 7
#define DCB_VC2 (0 << DCB_ADDR_SHIFT)
#define DCB_CMAP_ALL (1 << DCB_ADDR_SHIFT)
#define DCB_CMAP0 (2 << DCB_ADDR_SHIFT)
#define DCB_CMAP1 (3 << DCB_ADDR_SHIFT)
#define DCB_XMAP_ALL (4 << DCB_ADDR_SHIFT)
#define DCB_XMAP0 (5 << DCB_ADDR_SHIFT)
#define DCB_XMAP1 (6 << DCB_ADDR_SHIFT)
#define DCB_BT445 (7 << DCB_ADDR_SHIFT)
#define DCB_VCC1 (8 << DCB_ADDR_SHIFT)
#define DCB_VAB1 (9 << DCB_ADDR_SHIFT)
#define DCB_LG3_BDVERS0 (10 << DCB_ADDR_SHIFT)
#define DCB_LG3_ICS1562 (11 << DCB_ADDR_SHIFT)
#define DCB_RESERVED (15 << DCB_ADDR_SHIFT)
/* DCB protocol ack types */
#define DCB_ENSYNCACK (1 << 11)
#define DCB_ENASYNCACK (1 << 12)
#define DCB_CSWIDTH_SHIFT 13
#define DCB_CSHOLD_SHIFT 18
#define DCB_CSSETUP_SHIFT 23
/* XMAP9 specific defines */
/* XMAP9 -- registers as seen on the DCBMODE register*/
# define XM9_CRS_CONFIG (0 << DCB_CRS_SHIFT)
# define XM9_PUPMODE (1 << 0)
# define XM9_ODD_PIXEL (1 << 1)
# define XM9_8_BITPLANES (1 << 2)
# define XM9_SLOW_DCB (1 << 3)
# define XM9_VIDEO_RGBMAP_MASK (3 << 4)
# define XM9_EXPRESS_VIDEO (1 << 6)
# define XM9_VIDEO_OPTION (1 << 7)
# define XM9_CRS_REVISION (1 << DCB_CRS_SHIFT)
# define XM9_CRS_FIFO_AVAIL (2 << DCB_CRS_SHIFT)
# define XM9_FIFO_0_AVAIL 0
# define XM9_FIFO_1_AVAIL 1
# define XM9_FIFO_2_AVAIL 3
# define XM9_FIFO_3_AVAIL 2
# define XM9_FIFO_FULL XM9_FIFO_0_AVAIL
# define XM9_FIFO_EMPTY XM9_FIFO_3_AVAIL
# define XM9_CRS_CURS_CMAP_MSB (3 << DCB_CRS_SHIFT)
# define XM9_CRS_PUP_CMAP_MSB (4 << DCB_CRS_SHIFT)
# define XM9_CRS_MODE_REG_DATA (5 << DCB_CRS_SHIFT)
# define XM9_CRS_MODE_REG_INDEX (7 << DCB_CRS_SHIFT)
#define DCB_CYCLES(setup,hold,width) \
((hold << DCB_CSHOLD_SHIFT) | \
(setup << DCB_CSSETUP_SHIFT)| \
(width << DCB_CSWIDTH_SHIFT))
#define W_DCB_XMAP9_PROTOCOL DCB_CYCLES (2, 1, 0)
#define WSLOW_DCB_XMAP9_PROTOCOL DCB_CYCLES (5, 5, 0)
#define WAYSLOW_DCB_XMAP9_PROTOCOL DCB_CYCLES (12, 12, 0)
#define R_DCB_XMAP9_PROTOCOL DCB_CYCLES (2, 1, 3)
static __inline__ void
xmap9FIFOWait (struct newport_regs *rex)
{
rex->set.dcbmode = DCB_XMAP0 | XM9_CRS_FIFO_AVAIL |
DCB_DATAWIDTH_1 | R_DCB_XMAP9_PROTOCOL;
newport_bfwait (rex);
while ((rex->set.dcbdata0.bybytes.b3 & 3) != XM9_FIFO_EMPTY)
;
}
static __inline__ void
xmap9SetModeReg (struct newport_regs *rex, unsigned int modereg, unsigned int data24, int cfreq)
{
if (cfreq > 119)
rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
DCB_DATAWIDTH_4 | W_DCB_XMAP9_PROTOCOL;
else if (cfreq > 59)
rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
DCB_DATAWIDTH_4 | WSLOW_DCB_XMAP9_PROTOCOL;
else
rex->set.dcbmode = DCB_XMAP_ALL | XM9_CRS_MODE_REG_DATA |
DCB_DATAWIDTH_4 | WAYSLOW_DCB_XMAP9_PROTOCOL;
rex->set.dcbdata0.byword = ((modereg) << 24) | (data24 & 0xffffff);
}
#define BT445_PROTOCOL DCB_CYCLES(1,1,3)
#define BT445_CSR_ADDR_REG (0 << DCB_CRS_SHIFT)
#define BT445_CSR_REVISION (2 << DCB_CRS_SHIFT)
#define BT445_REVISION_REG 0x01
#endif /* !(_SGI_NEWPORT_H) */
View Git Blame Copy Permalink