mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
80359a9c5c
Bring ezusb and whiteheat into line with the coding style Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
303 lines
9.0 KiB
C
303 lines
9.0 KiB
C
/*
|
|
* USB ConnectTech WhiteHEAT driver
|
|
*
|
|
* Copyright (C) 2002
|
|
* Connect Tech Inc.
|
|
*
|
|
* Copyright (C) 1999, 2000
|
|
* Greg Kroah-Hartman (greg@kroah.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* See Documentation/usb/usb-serial.txt for more information on using this
|
|
* driver
|
|
*
|
|
*/
|
|
|
|
#ifndef __LINUX_USB_SERIAL_WHITEHEAT_H
|
|
#define __LINUX_USB_SERIAL_WHITEHEAT_H
|
|
|
|
|
|
/* WhiteHEAT commands */
|
|
#define WHITEHEAT_OPEN 1 /* open the port */
|
|
#define WHITEHEAT_CLOSE 2 /* close the port */
|
|
#define WHITEHEAT_SETUP_PORT 3 /* change port settings */
|
|
#define WHITEHEAT_SET_RTS 4 /* turn RTS on or off */
|
|
#define WHITEHEAT_SET_DTR 5 /* turn DTR on or off */
|
|
#define WHITEHEAT_SET_BREAK 6 /* turn BREAK on or off */
|
|
#define WHITEHEAT_DUMP 7 /* dump memory */
|
|
#define WHITEHEAT_STATUS 8 /* get status */
|
|
#define WHITEHEAT_PURGE 9 /* clear the UART fifos */
|
|
#define WHITEHEAT_GET_DTR_RTS 10 /* get the state of DTR and RTS
|
|
for a port */
|
|
#define WHITEHEAT_GET_HW_INFO 11 /* get EEPROM info and
|
|
hardware ID */
|
|
#define WHITEHEAT_REPORT_TX_DONE 12 /* get the next TX done */
|
|
#define WHITEHEAT_EVENT 13 /* unsolicited status events */
|
|
#define WHITEHEAT_ECHO 14 /* send data to the indicated
|
|
IN endpoint */
|
|
#define WHITEHEAT_DO_TEST 15 /* perform specified test */
|
|
#define WHITEHEAT_CMD_COMPLETE 16 /* reply for some commands */
|
|
#define WHITEHEAT_CMD_FAILURE 17 /* reply for failed commands */
|
|
|
|
|
|
/*
|
|
* Commands to the firmware
|
|
*/
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_OPEN
|
|
* WHITEHEAT_CLOSE
|
|
* WHITEHEAT_STATUS
|
|
* WHITEHEAT_GET_DTR_RTS
|
|
* WHITEHEAT_REPORT_TX_DONE
|
|
*/
|
|
struct whiteheat_simple {
|
|
__u8 port; /* port number (1 to N) */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_SETUP_PORT
|
|
*/
|
|
#define WHITEHEAT_PAR_NONE 'n' /* no parity */
|
|
#define WHITEHEAT_PAR_EVEN 'e' /* even parity */
|
|
#define WHITEHEAT_PAR_ODD 'o' /* odd parity */
|
|
#define WHITEHEAT_PAR_SPACE '0' /* space (force 0) parity */
|
|
#define WHITEHEAT_PAR_MARK '1' /* mark (force 1) parity */
|
|
|
|
#define WHITEHEAT_SFLOW_NONE 'n' /* no software flow control */
|
|
#define WHITEHEAT_SFLOW_RX 'r' /* XOFF/ON is sent when RX
|
|
fills/empties */
|
|
#define WHITEHEAT_SFLOW_TX 't' /* when received XOFF/ON will
|
|
stop/start TX */
|
|
#define WHITEHEAT_SFLOW_RXTX 'b' /* both SFLOW_RX and SFLOW_TX */
|
|
|
|
#define WHITEHEAT_HFLOW_NONE 0x00 /* no hardware flow control */
|
|
#define WHITEHEAT_HFLOW_RTS_TOGGLE 0x01 /* RTS is on during transmit,
|
|
off otherwise */
|
|
#define WHITEHEAT_HFLOW_DTR 0x02 /* DTR is off/on when RX
|
|
fills/empties */
|
|
#define WHITEHEAT_HFLOW_CTS 0x08 /* when received CTS off/on
|
|
will stop/start TX */
|
|
#define WHITEHEAT_HFLOW_DSR 0x10 /* when received DSR off/on
|
|
will stop/start TX */
|
|
#define WHITEHEAT_HFLOW_RTS 0x80 /* RTS is off/on when RX
|
|
fills/empties */
|
|
|
|
struct whiteheat_port_settings {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u32 baud; /* any value 7 - 460800, firmware calculates
|
|
best fit; arrives little endian */
|
|
__u8 bits; /* 5, 6, 7, or 8 */
|
|
__u8 stop; /* 1 or 2, default 1 (2 = 1.5 if bits = 5) */
|
|
__u8 parity; /* see WHITEHEAT_PAR_* above */
|
|
__u8 sflow; /* see WHITEHEAT_SFLOW_* above */
|
|
__u8 xoff; /* XOFF byte value */
|
|
__u8 xon; /* XON byte value */
|
|
__u8 hflow; /* see WHITEHEAT_HFLOW_* above */
|
|
__u8 lloop; /* 0/1 turns local loopback mode off/on */
|
|
} __attribute__ ((packed));
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_SET_RTS
|
|
* WHITEHEAT_SET_DTR
|
|
* WHITEHEAT_SET_BREAK
|
|
*/
|
|
#define WHITEHEAT_RTS_OFF 0x00
|
|
#define WHITEHEAT_RTS_ON 0x01
|
|
#define WHITEHEAT_DTR_OFF 0x00
|
|
#define WHITEHEAT_DTR_ON 0x01
|
|
#define WHITEHEAT_BREAK_OFF 0x00
|
|
#define WHITEHEAT_BREAK_ON 0x01
|
|
|
|
struct whiteheat_set_rdb {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 state; /* 0/1 turns signal off/on */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_DUMP
|
|
*/
|
|
#define WHITEHEAT_DUMP_MEM_DATA 'd' /* data */
|
|
#define WHITEHEAT_DUMP_MEM_IDATA 'i' /* idata */
|
|
#define WHITEHEAT_DUMP_MEM_BDATA 'b' /* bdata */
|
|
#define WHITEHEAT_DUMP_MEM_XDATA 'x' /* xdata */
|
|
|
|
/*
|
|
* Allowable address ranges (firmware checks address):
|
|
* Type DATA: 0x00 - 0xff
|
|
* Type IDATA: 0x80 - 0xff
|
|
* Type BDATA: 0x20 - 0x2f
|
|
* Type XDATA: 0x0000 - 0xffff
|
|
*
|
|
* B/I/DATA all read the local memory space
|
|
* XDATA reads the external memory space
|
|
* BDATA returns bits as bytes
|
|
*
|
|
* NOTE: 0x80 - 0xff (local space) are the Special Function Registers
|
|
* of the 8051, and some have on-read side-effects.
|
|
*/
|
|
|
|
struct whiteheat_dump {
|
|
__u8 mem_type; /* see WHITEHEAT_DUMP_* above */
|
|
__u16 addr; /* address, see restrictions above */
|
|
__u16 length; /* number of bytes to dump, max 63 bytes */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_PURGE
|
|
*/
|
|
#define WHITEHEAT_PURGE_RX 0x01 /* purge rx fifos */
|
|
#define WHITEHEAT_PURGE_TX 0x02 /* purge tx fifos */
|
|
|
|
struct whiteheat_purge {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 what; /* bit pattern of what to purge */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_ECHO
|
|
*/
|
|
struct whiteheat_echo {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 length; /* length of message to echo, max 61 bytes */
|
|
__u8 echo_data[61]; /* data to echo */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_DO_TEST
|
|
*/
|
|
#define WHITEHEAT_TEST_UART_RW 0x01 /* read/write uart registers */
|
|
#define WHITEHEAT_TEST_UART_INTR 0x02 /* uart interrupt */
|
|
#define WHITEHEAT_TEST_SETUP_CONT 0x03 /* setup for
|
|
PORT_CONT/PORT_DISCONT */
|
|
#define WHITEHEAT_TEST_PORT_CONT 0x04 /* port connect */
|
|
#define WHITEHEAT_TEST_PORT_DISCONT 0x05 /* port disconnect */
|
|
#define WHITEHEAT_TEST_UART_CLK_START 0x06 /* uart clock test start */
|
|
#define WHITEHEAT_TEST_UART_CLK_STOP 0x07 /* uart clock test stop */
|
|
#define WHITEHEAT_TEST_MODEM_FT 0x08 /* modem signals, requires a
|
|
loopback cable/connector */
|
|
#define WHITEHEAT_TEST_ERASE_EEPROM 0x09 /* erase eeprom */
|
|
#define WHITEHEAT_TEST_READ_EEPROM 0x0a /* read eeprom */
|
|
#define WHITEHEAT_TEST_PROGRAM_EEPROM 0x0b /* program eeprom */
|
|
|
|
struct whiteheat_test {
|
|
__u8 port; /* port number (1 to n) */
|
|
__u8 test; /* see WHITEHEAT_TEST_* above*/
|
|
__u8 info[32]; /* additional info */
|
|
};
|
|
|
|
|
|
/*
|
|
* Replies from the firmware
|
|
*/
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_STATUS
|
|
*/
|
|
#define WHITEHEAT_EVENT_MODEM 0x01 /* modem field is valid */
|
|
#define WHITEHEAT_EVENT_ERROR 0x02 /* error field is valid */
|
|
#define WHITEHEAT_EVENT_FLOW 0x04 /* flow field is valid */
|
|
#define WHITEHEAT_EVENT_CONNECT 0x08 /* connect field is valid */
|
|
|
|
#define WHITEHEAT_FLOW_NONE 0x00 /* no flow control active */
|
|
#define WHITEHEAT_FLOW_HARD_OUT 0x01 /* TX is stopped by CTS
|
|
(waiting for CTS to go on) */
|
|
#define WHITEHEAT_FLOW_HARD_IN 0x02 /* remote TX is stopped
|
|
by RTS */
|
|
#define WHITEHEAT_FLOW_SOFT_OUT 0x04 /* TX is stopped by XOFF
|
|
received (waiting for XON) */
|
|
#define WHITEHEAT_FLOW_SOFT_IN 0x08 /* remote TX is stopped by XOFF
|
|
transmitted */
|
|
#define WHITEHEAT_FLOW_TX_DONE 0x80 /* TX has completed */
|
|
|
|
struct whiteheat_status_info {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 event; /* indicates what the current event is,
|
|
see WHITEHEAT_EVENT_* above */
|
|
__u8 modem; /* modem signal status (copy of uart's
|
|
MSR register) */
|
|
__u8 error; /* line status (copy of uart's LSR register) */
|
|
__u8 flow; /* flow control state, see WHITEHEAT_FLOW_*
|
|
above */
|
|
__u8 connect; /* 0 means not connected, non-zero means
|
|
connected */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_GET_DTR_RTS
|
|
*/
|
|
struct whiteheat_dr_info {
|
|
__u8 mcr; /* copy of uart's MCR register */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_GET_HW_INFO
|
|
*/
|
|
struct whiteheat_hw_info {
|
|
__u8 hw_id; /* hardware id number, WhiteHEAT = 0 */
|
|
__u8 sw_major_rev; /* major version number */
|
|
__u8 sw_minor_rev; /* minor version number */
|
|
struct whiteheat_hw_eeprom_info {
|
|
__u8 b0; /* B0 */
|
|
__u8 vendor_id_low; /* vendor id (low byte) */
|
|
__u8 vendor_id_high; /* vendor id (high byte) */
|
|
__u8 product_id_low; /* product id (low byte) */
|
|
__u8 product_id_high; /* product id (high byte) */
|
|
__u8 device_id_low; /* device id (low byte) */
|
|
__u8 device_id_high; /* device id (high byte) */
|
|
__u8 not_used_1;
|
|
__u8 serial_number_0; /* serial number (low byte) */
|
|
__u8 serial_number_1; /* serial number */
|
|
__u8 serial_number_2; /* serial number */
|
|
__u8 serial_number_3; /* serial number (high byte) */
|
|
__u8 not_used_2;
|
|
__u8 not_used_3;
|
|
__u8 checksum_low; /* checksum (low byte) */
|
|
__u8 checksum_high; /* checksum (high byte */
|
|
} hw_eeprom_info; /* EEPROM contents */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_EVENT
|
|
*/
|
|
struct whiteheat_event_info {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 event; /* see whiteheat_status_info.event */
|
|
__u8 info; /* see whiteheat_status_info.modem, .error,
|
|
.flow, .connect */
|
|
};
|
|
|
|
|
|
/*
|
|
* WHITEHEAT_DO_TEST
|
|
*/
|
|
#define WHITEHEAT_TEST_FAIL 0x00 /* test failed */
|
|
#define WHITEHEAT_TEST_UNKNOWN 0x01 /* unknown test requested */
|
|
#define WHITEHEAT_TEST_PASS 0xff /* test passed */
|
|
|
|
struct whiteheat_test_info {
|
|
__u8 port; /* port number (1 to N) */
|
|
__u8 test; /* indicates which test this is a response for,
|
|
see WHITEHEAT_DO_TEST above */
|
|
__u8 status; /* see WHITEHEAT_TEST_* above */
|
|
__u8 results[32]; /* test-dependent results */
|
|
};
|
|
|
|
|
|
#endif
|