2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 09:43:59 +08:00
linux-next/drivers/xen/xen-pciback/conf_space_quirks.c
Konrad Rzeszutek Wilk 30edc14bf3 xen/pciback: xen pci backend driver.
This is the host side counterpart to the frontend driver in
drivers/pci/xen-pcifront.c. The PV protocol is also implemented by
frontend drivers in other OSes too, such as the BSDs.

The PV protocol is rather simple. There is page shared with the guest,
which has the 'struct xen_pci_sharedinfo' embossed in it. The backend
has a thread that is kicked every-time the structure is changed and
based on the operation field it performs specific tasks:

 XEN_PCI_OP_conf_[read|write]:
   Read/Write 0xCF8/0xCFC filtered data. (conf_space*.c)
   Based on which field is probed, we either enable/disable the PCI
   device, change power state, read VPD, etc. The major goal of this
   call is to provide a Physical IRQ (PIRQ) to the guest.

   The PIRQ is Xen hypervisor global IRQ value irrespective of the IRQ
   is tied in to the IO-APIC, or is a vector. For GSI type
   interrupts, the PIRQ==GSI holds. For MSI/MSI-X the
   PIRQ value != Linux IRQ number (thought PIRQ==vector).

   Please note, that with Xen, all interrupts (except those level shared ones)
   are injected directly to the guest - there is no host interaction.

 XEN_PCI_OP_[enable|disable]_msi[|x] (pciback_ops.c)
   Enables/disables the MSI/MSI-X capability of the device. These operations
   setup the MSI/MSI-X vectors for the guest and pass them to the frontend.

   When the device is activated, the interrupts are directly injected in the
   guest without involving the host.

 XEN_PCI_OP_aer_[detected|resume|mmio|slotreset]: In case of failure,
  perform the appropriate AER commands on the guest. Right now that is
  a cop-out - we just kill the guest.

Besides implementing those commands, it can also

 - hide a PCI device from the host. When booting up, the user can specify
   xen-pciback.hide=(1:0:0)(BDF..) so that host does not try to use the
   device.

The driver was lifted from linux-2.6.18.hg tree and fixed up
so that it could compile under v3.0. Per suggestion from Jesse Barnes
moved the driver to drivers/xen/xen-pciback.

Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Jeremy Fitzhardinge <jeremy.fitzhardinge@citrix.com>
2011-07-19 20:58:01 -04:00

141 lines
3.0 KiB
C

/*
* PCI Backend - Handle special overlays for broken devices.
*
* Author: Ryan Wilson <hap9@epoch.ncsc.mil>
* Author: Chris Bookholt <hap10@epoch.ncsc.mil>
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include "pciback.h"
#include "conf_space.h"
#include "conf_space_quirks.h"
LIST_HEAD(pciback_quirks);
static inline const struct pci_device_id *
match_one_device(const struct pci_device_id *id, const struct pci_dev *dev)
{
if ((id->vendor == PCI_ANY_ID || id->vendor == dev->vendor) &&
(id->device == PCI_ANY_ID || id->device == dev->device) &&
(id->subvendor == PCI_ANY_ID ||
id->subvendor == dev->subsystem_vendor) &&
(id->subdevice == PCI_ANY_ID ||
id->subdevice == dev->subsystem_device) &&
!((id->class ^ dev->class) & id->class_mask))
return id;
return NULL;
}
struct pciback_config_quirk *pciback_find_quirk(struct pci_dev *dev)
{
struct pciback_config_quirk *tmp_quirk;
list_for_each_entry(tmp_quirk, &pciback_quirks, quirks_list)
if (match_one_device(&tmp_quirk->devid, dev) != NULL)
goto out;
tmp_quirk = NULL;
printk(KERN_DEBUG
"quirk didn't match any device pciback knows about\n");
out:
return tmp_quirk;
}
static inline void register_quirk(struct pciback_config_quirk *quirk)
{
list_add_tail(&quirk->quirks_list, &pciback_quirks);
}
int pciback_field_is_dup(struct pci_dev *dev, unsigned int reg)
{
int ret = 0;
struct pciback_dev_data *dev_data = pci_get_drvdata(dev);
struct config_field_entry *cfg_entry;
list_for_each_entry(cfg_entry, &dev_data->config_fields, list) {
if (OFFSET(cfg_entry) == reg) {
ret = 1;
break;
}
}
return ret;
}
int pciback_config_quirks_add_field(struct pci_dev *dev, struct config_field
*field)
{
int err = 0;
switch (field->size) {
case 1:
field->u.b.read = pciback_read_config_byte;
field->u.b.write = pciback_write_config_byte;
break;
case 2:
field->u.w.read = pciback_read_config_word;
field->u.w.write = pciback_write_config_word;
break;
case 4:
field->u.dw.read = pciback_read_config_dword;
field->u.dw.write = pciback_write_config_dword;
break;
default:
err = -EINVAL;
goto out;
}
pciback_config_add_field(dev, field);
out:
return err;
}
int pciback_config_quirks_init(struct pci_dev *dev)
{
struct pciback_config_quirk *quirk;
int ret = 0;
quirk = kzalloc(sizeof(*quirk), GFP_ATOMIC);
if (!quirk) {
ret = -ENOMEM;
goto out;
}
quirk->devid.vendor = dev->vendor;
quirk->devid.device = dev->device;
quirk->devid.subvendor = dev->subsystem_vendor;
quirk->devid.subdevice = dev->subsystem_device;
quirk->devid.class = 0;
quirk->devid.class_mask = 0;
quirk->devid.driver_data = 0UL;
quirk->pdev = dev;
register_quirk(quirk);
out:
return ret;
}
void pciback_config_field_free(struct config_field *field)
{
kfree(field);
}
int pciback_config_quirk_release(struct pci_dev *dev)
{
struct pciback_config_quirk *quirk;
int ret = 0;
quirk = pciback_find_quirk(dev);
if (!quirk) {
ret = -ENXIO;
goto out;
}
list_del(&quirk->quirks_list);
kfree(quirk);
out:
return ret;
}