mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-25 05:34:00 +08:00
13904fba37
This patch moves OneNAND device definitions from mach-s5pv210 to plat-s5p so that can support it commonly. Note: S5PC110 and S5PC210 have same OneNAND driver. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com>
527 lines
12 KiB
C
527 lines
12 KiB
C
/* linux/arch/arm/mach-s5pv210/mach-aquila.c
|
|
*
|
|
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/init.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/fb.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c-gpio.h>
|
|
#include <linux/mfd/max8998.h>
|
|
#include <linux/gpio_keys.h>
|
|
#include <linux/input.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <asm/mach/arch.h>
|
|
#include <asm/mach/map.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/mach-types.h>
|
|
|
|
#include <mach/map.h>
|
|
#include <mach/regs-clock.h>
|
|
#include <mach/regs-fb.h>
|
|
|
|
#include <plat/gpio-cfg.h>
|
|
#include <plat/regs-serial.h>
|
|
#include <plat/s5pv210.h>
|
|
#include <plat/devs.h>
|
|
#include <plat/cpu.h>
|
|
#include <plat/fb.h>
|
|
#include <plat/fimc-core.h>
|
|
#include <plat/sdhci.h>
|
|
|
|
/* Following are default values for UCON, ULCON and UFCON UART registers */
|
|
#define AQUILA_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \
|
|
S3C2410_UCON_RXILEVEL | \
|
|
S3C2410_UCON_TXIRQMODE | \
|
|
S3C2410_UCON_RXIRQMODE | \
|
|
S3C2410_UCON_RXFIFO_TOI | \
|
|
S3C2443_UCON_RXERR_IRQEN)
|
|
|
|
#define AQUILA_ULCON_DEFAULT S3C2410_LCON_CS8
|
|
|
|
#define AQUILA_UFCON_DEFAULT S3C2410_UFCON_FIFOMODE
|
|
|
|
static struct s3c2410_uartcfg aquila_uartcfgs[] __initdata = {
|
|
[0] = {
|
|
.hwport = 0,
|
|
.flags = 0,
|
|
.ucon = AQUILA_UCON_DEFAULT,
|
|
.ulcon = AQUILA_ULCON_DEFAULT,
|
|
/*
|
|
* Actually UART0 can support 256 bytes fifo, but aquila board
|
|
* supports 128 bytes fifo because of initial chip bug
|
|
*/
|
|
.ufcon = AQUILA_UFCON_DEFAULT |
|
|
S5PV210_UFCON_TXTRIG128 | S5PV210_UFCON_RXTRIG128,
|
|
},
|
|
[1] = {
|
|
.hwport = 1,
|
|
.flags = 0,
|
|
.ucon = AQUILA_UCON_DEFAULT,
|
|
.ulcon = AQUILA_ULCON_DEFAULT,
|
|
.ufcon = AQUILA_UFCON_DEFAULT |
|
|
S5PV210_UFCON_TXTRIG64 | S5PV210_UFCON_RXTRIG64,
|
|
},
|
|
[2] = {
|
|
.hwport = 2,
|
|
.flags = 0,
|
|
.ucon = AQUILA_UCON_DEFAULT,
|
|
.ulcon = AQUILA_ULCON_DEFAULT,
|
|
.ufcon = AQUILA_UFCON_DEFAULT |
|
|
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
|
|
},
|
|
[3] = {
|
|
.hwport = 3,
|
|
.flags = 0,
|
|
.ucon = AQUILA_UCON_DEFAULT,
|
|
.ulcon = AQUILA_ULCON_DEFAULT,
|
|
.ufcon = AQUILA_UFCON_DEFAULT |
|
|
S5PV210_UFCON_TXTRIG16 | S5PV210_UFCON_RXTRIG16,
|
|
},
|
|
};
|
|
|
|
/* Frame Buffer */
|
|
static struct s3c_fb_pd_win aquila_fb_win0 = {
|
|
.win_mode = {
|
|
.left_margin = 16,
|
|
.right_margin = 16,
|
|
.upper_margin = 3,
|
|
.lower_margin = 28,
|
|
.hsync_len = 2,
|
|
.vsync_len = 2,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
},
|
|
.max_bpp = 32,
|
|
.default_bpp = 16,
|
|
};
|
|
|
|
static struct s3c_fb_pd_win aquila_fb_win1 = {
|
|
.win_mode = {
|
|
.left_margin = 16,
|
|
.right_margin = 16,
|
|
.upper_margin = 3,
|
|
.lower_margin = 28,
|
|
.hsync_len = 2,
|
|
.vsync_len = 2,
|
|
.xres = 480,
|
|
.yres = 800,
|
|
},
|
|
.max_bpp = 32,
|
|
.default_bpp = 16,
|
|
};
|
|
|
|
static struct s3c_fb_platdata aquila_lcd_pdata __initdata = {
|
|
.win[0] = &aquila_fb_win0,
|
|
.win[1] = &aquila_fb_win1,
|
|
.vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB,
|
|
.vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC |
|
|
VIDCON1_INV_VCLK | VIDCON1_INV_VDEN,
|
|
.setup_gpio = s5pv210_fb_gpio_setup_24bpp,
|
|
};
|
|
|
|
/* MAX8998 regulators */
|
|
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
|
|
|
|
static struct regulator_init_data aquila_ldo2_data = {
|
|
.constraints = {
|
|
.name = "VALIVE_1.1V",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1100000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo3_data = {
|
|
.constraints = {
|
|
.name = "VUSB/MIPI_1.1V",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1100000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo4_data = {
|
|
.constraints = {
|
|
.name = "VDAC_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo5_data = {
|
|
.constraints = {
|
|
.name = "VTF_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo6_data = {
|
|
.constraints = {
|
|
.name = "VCC_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo7_data = {
|
|
.constraints = {
|
|
.name = "VCC_3.0V",
|
|
.min_uV = 3000000,
|
|
.max_uV = 3000000,
|
|
.apply_uV = 1,
|
|
.boot_on = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo8_data = {
|
|
.constraints = {
|
|
.name = "VUSB/VADC_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo9_data = {
|
|
.constraints = {
|
|
.name = "VCC/VCAM_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo10_data = {
|
|
.constraints = {
|
|
.name = "VPLL_1.1V",
|
|
.min_uV = 1100000,
|
|
.max_uV = 1100000,
|
|
.apply_uV = 1,
|
|
.boot_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo11_data = {
|
|
.constraints = {
|
|
.name = "CAM_IO_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo12_data = {
|
|
.constraints = {
|
|
.name = "CAM_ISP_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo13_data = {
|
|
.constraints = {
|
|
.name = "CAM_A_2.8V",
|
|
.min_uV = 2800000,
|
|
.max_uV = 2800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo14_data = {
|
|
.constraints = {
|
|
.name = "CAM_CIF_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo15_data = {
|
|
.constraints = {
|
|
.name = "CAM_AF_3.3V",
|
|
.min_uV = 3300000,
|
|
.max_uV = 3300000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo16_data = {
|
|
.constraints = {
|
|
.name = "VMIPI_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_ldo17_data = {
|
|
.constraints = {
|
|
.name = "CAM_8M_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
/* BUCK */
|
|
static struct regulator_consumer_supply buck1_consumer[] = {
|
|
{ .supply = "vddarm", },
|
|
};
|
|
|
|
static struct regulator_consumer_supply buck2_consumer[] = {
|
|
{ .supply = "vddint", },
|
|
};
|
|
|
|
static struct regulator_init_data aquila_buck1_data = {
|
|
.constraints = {
|
|
.name = "VARM_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(buck1_consumer),
|
|
.consumer_supplies = buck1_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data aquila_buck2_data = {
|
|
.constraints = {
|
|
.name = "VINT_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
|
|
REGULATOR_CHANGE_STATUS,
|
|
},
|
|
.num_consumer_supplies = ARRAY_SIZE(buck2_consumer),
|
|
.consumer_supplies = buck2_consumer,
|
|
};
|
|
|
|
static struct regulator_init_data aquila_buck3_data = {
|
|
.constraints = {
|
|
.name = "VCC_1.8V",
|
|
.min_uV = 1800000,
|
|
.max_uV = 1800000,
|
|
.apply_uV = 1,
|
|
.state_mem = {
|
|
.enabled = 1,
|
|
},
|
|
},
|
|
};
|
|
|
|
static struct regulator_init_data aquila_buck4_data = {
|
|
.constraints = {
|
|
.name = "CAM_CORE_1.2V",
|
|
.min_uV = 1200000,
|
|
.max_uV = 1200000,
|
|
.apply_uV = 1,
|
|
.always_on = 1,
|
|
},
|
|
};
|
|
|
|
static struct max8998_regulator_data aquila_regulators[] = {
|
|
{ MAX8998_LDO2, &aquila_ldo2_data },
|
|
{ MAX8998_LDO3, &aquila_ldo3_data },
|
|
{ MAX8998_LDO4, &aquila_ldo4_data },
|
|
{ MAX8998_LDO5, &aquila_ldo5_data },
|
|
{ MAX8998_LDO6, &aquila_ldo6_data },
|
|
{ MAX8998_LDO7, &aquila_ldo7_data },
|
|
{ MAX8998_LDO8, &aquila_ldo8_data },
|
|
{ MAX8998_LDO9, &aquila_ldo9_data },
|
|
{ MAX8998_LDO10, &aquila_ldo10_data },
|
|
{ MAX8998_LDO11, &aquila_ldo11_data },
|
|
{ MAX8998_LDO12, &aquila_ldo12_data },
|
|
{ MAX8998_LDO13, &aquila_ldo13_data },
|
|
{ MAX8998_LDO14, &aquila_ldo14_data },
|
|
{ MAX8998_LDO15, &aquila_ldo15_data },
|
|
{ MAX8998_LDO16, &aquila_ldo16_data },
|
|
{ MAX8998_LDO17, &aquila_ldo17_data },
|
|
{ MAX8998_BUCK1, &aquila_buck1_data },
|
|
{ MAX8998_BUCK2, &aquila_buck2_data },
|
|
{ MAX8998_BUCK3, &aquila_buck3_data },
|
|
{ MAX8998_BUCK4, &aquila_buck4_data },
|
|
};
|
|
|
|
static struct max8998_platform_data aquila_max8998_pdata = {
|
|
.num_regulators = ARRAY_SIZE(aquila_regulators),
|
|
.regulators = aquila_regulators,
|
|
};
|
|
#endif
|
|
|
|
/* GPIO I2C PMIC */
|
|
#define AP_I2C_GPIO_PMIC_BUS_4 4
|
|
static struct i2c_gpio_platform_data aquila_i2c_gpio_pmic_data = {
|
|
.sda_pin = S5PV210_GPJ4(0), /* XMSMCSN */
|
|
.scl_pin = S5PV210_GPJ4(3), /* XMSMIRQN */
|
|
};
|
|
|
|
static struct platform_device aquila_i2c_gpio_pmic = {
|
|
.name = "i2c-gpio",
|
|
.id = AP_I2C_GPIO_PMIC_BUS_4,
|
|
.dev = {
|
|
.platform_data = &aquila_i2c_gpio_pmic_data,
|
|
},
|
|
};
|
|
|
|
static struct i2c_board_info i2c_gpio_pmic_devs[] __initdata = {
|
|
#if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE)
|
|
{
|
|
/* 0xCC when SRAD = 0 */
|
|
I2C_BOARD_INFO("max8998", 0xCC >> 1),
|
|
.platform_data = &aquila_max8998_pdata,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
/* PMIC Power button */
|
|
static struct gpio_keys_button aquila_gpio_keys_table[] = {
|
|
{
|
|
.code = KEY_POWER,
|
|
.gpio = S5PV210_GPH2(6),
|
|
.desc = "gpio-keys: KEY_POWER",
|
|
.type = EV_KEY,
|
|
.active_low = 1,
|
|
.wakeup = 1,
|
|
.debounce_interval = 1,
|
|
},
|
|
};
|
|
|
|
static struct gpio_keys_platform_data aquila_gpio_keys_data = {
|
|
.buttons = aquila_gpio_keys_table,
|
|
.nbuttons = ARRAY_SIZE(aquila_gpio_keys_table),
|
|
};
|
|
|
|
static struct platform_device aquila_device_gpiokeys = {
|
|
.name = "gpio-keys",
|
|
.dev = {
|
|
.platform_data = &aquila_gpio_keys_data,
|
|
},
|
|
};
|
|
|
|
static void __init aquila_pmic_init(void)
|
|
{
|
|
/* AP_PMIC_IRQ: EINT7 */
|
|
s3c_gpio_cfgpin(S5PV210_GPH0(7), S3C_GPIO_SFN(0xf));
|
|
s3c_gpio_setpull(S5PV210_GPH0(7), S3C_GPIO_PULL_UP);
|
|
|
|
/* nPower: EINT22 */
|
|
s3c_gpio_cfgpin(S5PV210_GPH2(6), S3C_GPIO_SFN(0xf));
|
|
s3c_gpio_setpull(S5PV210_GPH2(6), S3C_GPIO_PULL_UP);
|
|
}
|
|
|
|
/* MoviNAND */
|
|
static struct s3c_sdhci_platdata aquila_hsmmc0_data __initdata = {
|
|
.max_width = 4,
|
|
.cd_type = S3C_SDHCI_CD_PERMANENT,
|
|
};
|
|
|
|
/* Wireless LAN */
|
|
static struct s3c_sdhci_platdata aquila_hsmmc1_data __initdata = {
|
|
.max_width = 4,
|
|
.cd_type = S3C_SDHCI_CD_EXTERNAL,
|
|
/* ext_cd_{init,cleanup} callbacks will be added later */
|
|
};
|
|
|
|
/* External Flash */
|
|
#define AQUILA_EXT_FLASH_EN S5PV210_MP05(4)
|
|
#define AQUILA_EXT_FLASH_CD S5PV210_GPH3(4)
|
|
static struct s3c_sdhci_platdata aquila_hsmmc2_data __initdata = {
|
|
.max_width = 4,
|
|
.cd_type = S3C_SDHCI_CD_GPIO,
|
|
.ext_cd_gpio = AQUILA_EXT_FLASH_CD,
|
|
.ext_cd_gpio_invert = 1,
|
|
};
|
|
|
|
static void aquila_setup_sdhci(void)
|
|
{
|
|
gpio_request(AQUILA_EXT_FLASH_EN, "FLASH_EN");
|
|
gpio_direction_output(AQUILA_EXT_FLASH_EN, 1);
|
|
|
|
s3c_sdhci0_set_platdata(&aquila_hsmmc0_data);
|
|
s3c_sdhci1_set_platdata(&aquila_hsmmc1_data);
|
|
s3c_sdhci2_set_platdata(&aquila_hsmmc2_data);
|
|
};
|
|
|
|
static struct platform_device *aquila_devices[] __initdata = {
|
|
&aquila_i2c_gpio_pmic,
|
|
&aquila_device_gpiokeys,
|
|
&s3c_device_fb,
|
|
&s5p_device_onenand,
|
|
&s3c_device_hsmmc0,
|
|
&s3c_device_hsmmc1,
|
|
&s3c_device_hsmmc2,
|
|
&s5p_device_fimc0,
|
|
&s5p_device_fimc1,
|
|
&s5p_device_fimc2,
|
|
};
|
|
|
|
static void __init aquila_map_io(void)
|
|
{
|
|
s5p_init_io(NULL, 0, S5P_VA_CHIPID);
|
|
s3c24xx_init_clocks(24000000);
|
|
s3c24xx_init_uarts(aquila_uartcfgs, ARRAY_SIZE(aquila_uartcfgs));
|
|
}
|
|
|
|
static void __init aquila_machine_init(void)
|
|
{
|
|
/* PMIC */
|
|
aquila_pmic_init();
|
|
i2c_register_board_info(AP_I2C_GPIO_PMIC_BUS_4, i2c_gpio_pmic_devs,
|
|
ARRAY_SIZE(i2c_gpio_pmic_devs));
|
|
/* SDHCI */
|
|
aquila_setup_sdhci();
|
|
|
|
s3c_fimc_setname(0, "s5p-fimc");
|
|
s3c_fimc_setname(1, "s5p-fimc");
|
|
s3c_fimc_setname(2, "s5p-fimc");
|
|
|
|
/* FB */
|
|
s3c_fb_set_platdata(&aquila_lcd_pdata);
|
|
|
|
platform_add_devices(aquila_devices, ARRAY_SIZE(aquila_devices));
|
|
}
|
|
|
|
MACHINE_START(AQUILA, "Aquila")
|
|
/* Maintainers:
|
|
Marek Szyprowski <m.szyprowski@samsung.com>
|
|
Kyungmin Park <kyungmin.park@samsung.com> */
|
|
.phys_io = S3C_PA_UART & 0xfff00000,
|
|
.io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc,
|
|
.boot_params = S5P_PA_SDRAM + 0x100,
|
|
.init_irq = s5pv210_init_irq,
|
|
.map_io = aquila_map_io,
|
|
.init_machine = aquila_machine_init,
|
|
.timer = &s3c24xx_timer,
|
|
MACHINE_END
|