Cory Maccarrone 490a566522 omap1: mmc: Add platform init for omap7xx ... The MMC mux pins normally used by omap chips in devices.c are different from what is needed by omap7xx chips. This change adds a conditional around the mux setup code to enable the correct mux pins. The omap730 and omap850 both use a different clock for the "fck" clock of the MMC interface than other omap processors based on the SOFT_REQ_REG, pin 12. The "ick" clock is the same as that used by other omap processors. * Added the missing clock definition as mmc3_ck to clock.h * Added the clock definition to omap_clks in clock.c * Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c With these changes, it is now possible to initialize and use MMC cards with omap730 and omap850 devices. Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>		2009-11-22 10:24:32 -08:00
..
include/mach	omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2	2009-10-19 17:32:58 -07:00
board-ams-delta.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-fsample.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-generic.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-h2-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h2.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h2.h	ARM: OMAP: No need to include board-h2.h from hardware.h	2009-03-23 18:07:33 -07:00
board-h3-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h3.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-h3.h	ARM: OMAP: No need to include board-h3.h from hardware.h	2009-03-23 18:07:33 -07:00
board-innovator.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-nokia770.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-osk.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-palmte.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-palmtt.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-palmz71.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-perseus2.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-sx1-mmc.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
board-sx1.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
board-voiceblue.c	Merge branch '7xx-iosplit-plat' with omap-fixes	2009-11-10 18:10:34 -08:00
clock.c	omap1: mmc: Add platform init for omap7xx	2009-11-22 10:24:32 -08:00
clock.h	omap1: mmc: Add platform init for omap7xx	2009-11-22 10:24:32 -08:00
devices.c	omap1: mmc: Add platform init for omap7xx	2009-11-22 10:24:32 -08:00
fpga.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
id.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
io.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
irq.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
Kconfig	ARM: OMAP1: Misc clean-up	2009-05-25 11:08:44 -07:00
leds-h2p2-debug.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds-innovator.c	[ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach	2008-08-07 09:55:48 +01:00
leds-osk.c	ARM: OMAP: switch to standard gpio get/set calls	2008-12-10 17:35:25 -08:00
leds.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
leds.h	[PATCH] ARM: 2799/1: OMAP update 4/11: Move OMAP1 LED code into mach-omap1 directory	2005-07-10 19:58:10 +01:00
mailbox.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
Makefile	ARM: OMAP1: Misc clean-up	2009-05-25 11:08:44 -07:00
Makefile.boot	[PATCH] ARM: 2798/1: OMAP update 2/11: Change ARM Kconfig to support omap1 and omap2	2005-07-10 19:58:08 +01:00
mcbsp.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
mux.c	omap1: mmc: Add platform init for omap7xx	2009-11-22 10:24:32 -08:00
pm.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00
pm.h	OMAP850: PM: Add an ARCH_OMAP850 check	2009-10-07 23:14:08 +01:00
serial.c	omap: Eliminate OMAP_MAX_NR_PORTS	2009-11-22 10:24:32 -08:00
sleep.S	OMAP7XX: Rename all the rest of the omap730 references in omap1 core	2009-10-07 23:14:06 +01:00
sram.S	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
time.c	OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead	2009-08-28 10:50:33 -07:00
timer32k.c	omap: headers: Move remaining headers from include/mach to include/plat	2009-10-20 09:40:47 -07:00