renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
Code
48e3becbee
linux-next/arch/arm/mach-sa1100/neponset.c
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes 
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00

354 lines
7.7 KiB
C
Raw Blame History

/*
* linux/arch/arm/mach-sa1100/neponset.c
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/ptrace.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/serial_core.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <asm/hardware.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/serial_sa1100.h>
#include <asm/arch/assabet.h>
#include <asm/arch/neponset.h>
#include <asm/hardware/sa1111.h>
#include <asm/sizes.h>
/*
* Install handler for Neponset IRQ. Note that we have to loop here
* since the ETHERNET and USAR IRQs are level based, and we need to
* ensure that the IRQ signal is deasserted before returning. This
* is rather unfortunate.
*/
static void
neponset_irq_handler(unsigned int irq, struct irqdesc *desc)
{
unsigned int irr;
while (1) {
struct irqdesc *d;
/*
* Acknowledge the parent IRQ.
*/
desc->chip->ack(irq);
/*
* Read the interrupt reason register. Let's have all
* active IRQ bits high. Note: there is a typo in the
* Neponset user's guide for the SA1111 IRR level.
*/
irr = IRR ^ (IRR_ETHERNET | IRR_USAR);
if ((irr & (IRR_ETHERNET | IRR_USAR | IRR_SA1111)) == 0)
break;
/*
* Since there is no individual mask, we have to
* mask the parent IRQ. This is safe, since we'll
* recheck the register for any pending IRQs.
*/
if (irr & (IRR_ETHERNET | IRR_USAR)) {
desc->chip->mask(irq);
/*
* Ack the interrupt now to prevent re-entering
* this neponset handler. Again, this is safe
* since we'll check the IRR register prior to
* leaving.
*/
desc->chip->ack(irq);
if (irr & IRR_ETHERNET) {
d = irq_desc + IRQ_NEPONSET_SMC9196;
desc_handle_irq(IRQ_NEPONSET_SMC9196, d);
}
if (irr & IRR_USAR) {
d = irq_desc + IRQ_NEPONSET_USAR;
desc_handle_irq(IRQ_NEPONSET_USAR, d);
}
desc->chip->unmask(irq);
}
if (irr & IRR_SA1111) {
d = irq_desc + IRQ_NEPONSET_SA1111;
desc_handle_irq(IRQ_NEPONSET_SA1111, d);
}
}
}
static void neponset_set_mctrl(struct uart_port *port, u_int mctrl)
{
u_int mdm_ctl0 = MDM_CTL_0;
if (port->mapbase == _Ser1UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS2;
else
mdm_ctl0 |= MDM_CTL0_RTS2;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR2;
else
mdm_ctl0 |= MDM_CTL0_DTR2;
} else if (port->mapbase == _Ser3UTCR0) {
if (mctrl & TIOCM_RTS)
mdm_ctl0 &= ~MDM_CTL0_RTS1;
else
mdm_ctl0 |= MDM_CTL0_RTS1;
if (mctrl & TIOCM_DTR)
mdm_ctl0 &= ~MDM_CTL0_DTR1;
else
mdm_ctl0 |= MDM_CTL0_DTR1;
}
MDM_CTL_0 = mdm_ctl0;
}
static u_int neponset_get_mctrl(struct uart_port *port)
{
u_int ret = TIOCM_CD | TIOCM_CTS | TIOCM_DSR;
u_int mdm_ctl1 = MDM_CTL_1;
if (port->mapbase == _Ser1UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD2)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS2)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR2)
ret &= ~TIOCM_DSR;
} else if (port->mapbase == _Ser3UTCR0) {
if (mdm_ctl1 & MDM_CTL1_DCD1)
ret &= ~TIOCM_CD;
if (mdm_ctl1 & MDM_CTL1_CTS1)
ret &= ~TIOCM_CTS;
if (mdm_ctl1 & MDM_CTL1_DSR1)
ret &= ~TIOCM_DSR;
}
return ret;
}
static struct sa1100_port_fns neponset_port_fns __initdata = {
.set_mctrl = neponset_set_mctrl,
.get_mctrl = neponset_get_mctrl,
};
static int neponset_probe(struct platform_device *dev)
{
sa1100_register_uart_fns(&neponset_port_fns);
/*
* Install handler for GPIO25.
*/
set_irq_type(IRQ_GPIO25, IRQT_RISING);
set_irq_chained_handler(IRQ_GPIO25, neponset_irq_handler);
/*
* We would set IRQ_GPIO25 to be a wake-up IRQ, but
* unfortunately something on the Neponset activates
* this IRQ on sleep (ethernet?)
*/
#if 0
enable_irq_wake(IRQ_GPIO25);
#endif
/*
* Setup other Neponset IRQs. SA1111 will be done by the
* generic SA1111 code.
*/
set_irq_handler(IRQ_NEPONSET_SMC9196, do_simple_IRQ);
set_irq_flags(IRQ_NEPONSET_SMC9196, IRQF_VALID | IRQF_PROBE);
set_irq_handler(IRQ_NEPONSET_USAR, do_simple_IRQ);
set_irq_flags(IRQ_NEPONSET_USAR, IRQF_VALID | IRQF_PROBE);
/*
* Disable GPIO 0/1 drivers so the buttons work on the module.
*/
NCR_0 = NCR_GP01_OFF;
return 0;
}
#ifdef CONFIG_PM
/*
* LDM power management.
*/
static int neponset_suspend(struct platform_device *dev, pm_message_t state)
{
/*
* Save state.
*/
if (!dev->dev.power.saved_state)
dev->dev.power.saved_state = kmalloc(sizeof(unsigned int), GFP_KERNEL);
if (!dev->dev.power.saved_state)
return -ENOMEM;
*(unsigned int *)dev->dev.power.saved_state = NCR_0;
return 0;
}
static int neponset_resume(struct platform_device *dev)
{
if (dev->dev.power.saved_state) {
NCR_0 = *(unsigned int *)dev->dev.power.saved_state;
kfree(dev->dev.power.saved_state);
dev->dev.power.saved_state = NULL;
}
return 0;
}
#else
#define neponset_suspend NULL
#define neponset_resume NULL
#endif
static struct platform_driver neponset_device_driver = {
.probe = neponset_probe,
.suspend = neponset_suspend,
.resume = neponset_resume,
.driver = {
.name = "neponset",
},
};
static struct resource neponset_resources[] = {
[0] = {
.start = 0x10000000,
.end = 0x17ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device neponset_device = {
.name = "neponset",
.id = 0,
.num_resources = ARRAY_SIZE(neponset_resources),
.resource = neponset_resources,
};
static struct resource sa1111_resources[] = {
[0] = {
.start = 0x40000000,
.end = 0x40001fff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_NEPONSET_SA1111,
.end = IRQ_NEPONSET_SA1111,
.flags = IORESOURCE_IRQ,
},
};
static u64 sa1111_dmamask = 0xffffffffUL;
static struct platform_device sa1111_device = {
.name = "sa1111",
.id = 0,
.dev = {
.dma_mask = &sa1111_dmamask,
.coherent_dma_mask = 0xffffffff,
},
.num_resources = ARRAY_SIZE(sa1111_resources),
.resource = sa1111_resources,
};
static struct resource smc91x_resources[] = {
[0] = {
.name = "smc91x-regs",
.start = SA1100_CS3_PHYS,
.end = SA1100_CS3_PHYS + 0x01ffffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_NEPONSET_SMC9196,
.end = IRQ_NEPONSET_SMC9196,
.flags = IORESOURCE_IRQ,
},
[2] = {
.name = "smc91x-attrib",
.start = SA1100_CS3_PHYS + 0x02000000,
.end = SA1100_CS3_PHYS + 0x03ffffff,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static struct platform_device *devices[] __initdata = {
&neponset_device,
&sa1111_device,
&smc91x_device,
};
static int __init neponset_init(void)
{
platform_driver_register(&neponset_device_driver);
/*
* The Neponset is only present on the Assabet machine type.
*/
if (!machine_is_assabet())
return -ENODEV;
/*
* Ensure that the memory bus request/grant signals are setup,
* and the grant is held in its inactive state, whether or not
* we actually have a Neponset attached.
*/
sa1110_mb_disable();
if (!machine_has_neponset()) {
printk(KERN_DEBUG "Neponset expansion board not present\n");
return -ENODEV;
}
if (WHOAMI != 0x11) {
printk(KERN_WARNING "Neponset board detected, but "
"wrong ID: %02x\n", WHOAMI);
return -ENODEV;
}
return platform_add_devices(devices, ARRAY_SIZE(devices));
}
subsys_initcall(neponset_init);
static struct map_desc neponset_io_desc[] __initdata = {
{ /* System Registers */
.virtual = 0xf3000000,
.pfn = __phys_to_pfn(0x10000000),
.length = SZ_1M,
.type = MT_DEVICE
}, { /* SA-1111 */
.virtual = 0xf4000000,
.pfn = __phys_to_pfn(0x40000000),
.length = SZ_1M,
.type = MT_DEVICE
}
};
void __init neponset_map_io(void)
{
iotable_init(neponset_io_desc, ARRAY_SIZE(neponset_io_desc));
}
View Git Blame Copy Permalink