renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
Code
46c1bf8133
linux-next/arch/arm/mach-ux500/cpu-db8500.c
Lee Jones 46c1bf8133 ARM: ux500: Remove duplicate DT_MACHINE_START - make u8500 for generic 
The u8500 and u9540 DT_MACHINE_START calls are almost identical
at the moment, referencing exactly the same function pointers.
Until this changes we may as well convert the original one to
be more generic and use that instead.

Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2012-11-01 13:02:24 +01:00

353 lines
10 KiB
C
Raw Blame History

/*
* Copyright (C) 2008-2009 ST-Ericsson SA
*
* Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2, as
* published by the Free Software Foundation.
*
*/
#include <linux/types.h>
#include <linux/init.h>
#include <linux/device.h>
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/mfd/abx500/ab8500.h>
#include <linux/mfd/dbx500-prcmu.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/regulator/machine.h>
#include <asm/pmu.h>
#include <asm/mach/map.h>
#include <asm/mach/arch.h>
#include <asm/hardware/gic.h>
#include <plat/gpio-nomadik.h>
#include <mach/hardware.h>
#include <mach/setup.h>
#include <mach/devices.h>
#include <linux/platform_data/usb-musb-ux500.h>
#include <mach/db8500-regs.h>
#include "devices-db8500.h"
#include "ste-dma40-db8500.h"
#include "board-mop500.h"
/* minimum static i/o mapping required to boot U8500 platforms */
static struct map_desc u8500_uart_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_UART0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_UART2_BASE, SZ_4K),
};
/* U8500 and U9540 common io_desc */
static struct map_desc u8500_common_io_desc[] __initdata = {
/* SCU base also covers GIC CPU BASE and TWD with its 4K page */
__IO_DEV_DESC(U8500_SCU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K),
__IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K),
__IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K),
__IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K),
__IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K),
__IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K),
};
/* U8500 IO map specific description */
static struct map_desc u8500_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K),
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K),
};
/* U9540 IO map specific description */
static struct map_desc u9540_io_desc[] __initdata = {
__IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K + SZ_8K),
__IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K + SZ_8K),
};
void __init u8500_map_io(void)
{
/*
* Map the UARTs early so that the DEBUG_LL stuff continues to work.
*/
iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc));
ux500_map_io();
iotable_init(u8500_common_io_desc, ARRAY_SIZE(u8500_common_io_desc));
if (cpu_is_ux540_family())
iotable_init(u9540_io_desc, ARRAY_SIZE(u9540_io_desc));
else
iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc));
_PRCMU_BASE = __io_address(U8500_PRCMU_BASE);
}
static struct resource db8500_pmu_resources[] = {
[0] = {
.start = IRQ_DB8500_PMU,
.end = IRQ_DB8500_PMU,
.flags = IORESOURCE_IRQ,
},
};
/*
* The PMU IRQ lines of two cores are wired together into a single interrupt.
* Bounce the interrupt to the other core if it's not ours.
*/
static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler)
{
irqreturn_t ret = handler(irq, dev);
int other = !smp_processor_id();
if (ret == IRQ_NONE && cpu_online(other))
irq_set_affinity(irq, cpumask_of(other));
/*
* We should be able to get away with the amount of IRQ_NONEs we give,
* while still having the spurious IRQ detection code kick in if the
* interrupt really starts hitting spuriously.
*/
return ret;
}
struct arm_pmu_platdata db8500_pmu_platdata = {
.handle_irq = db8500_pmu_handler,
};
static struct platform_device db8500_pmu_device = {
.name = "arm-pmu",
.id = -1,
.num_resources = ARRAY_SIZE(db8500_pmu_resources),
.resource = db8500_pmu_resources,
.dev.platform_data = &db8500_pmu_platdata,
};
static struct platform_device db8500_prcmu_device = {
.name = "db8500-prcmu",
};
static struct platform_device *platform_devs[] __initdata = {
&u8500_dma40_device,
&db8500_pmu_device,
&db8500_prcmu_device,
};
static resource_size_t __initdata db8500_gpio_base[] = {
U8500_GPIOBANK0_BASE,
U8500_GPIOBANK1_BASE,
U8500_GPIOBANK2_BASE,
U8500_GPIOBANK3_BASE,
U8500_GPIOBANK4_BASE,
U8500_GPIOBANK5_BASE,
U8500_GPIOBANK6_BASE,
U8500_GPIOBANK7_BASE,
U8500_GPIOBANK8_BASE,
};
static void __init db8500_add_gpios(struct device *parent)
{
struct nmk_gpio_platform_data pdata = {
.supports_sleepmode = true,
};
dbx500_add_gpios(parent, ARRAY_AND_SIZE(db8500_gpio_base),
IRQ_DB8500_GPIO0, &pdata);
dbx500_add_pinctrl(parent, "pinctrl-db8500");
}
static int usb_db8500_rx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_IEP_1_9,
DB8500_DMA_DEV37_USB_OTG_IEP_2_10,
DB8500_DMA_DEV36_USB_OTG_IEP_3_11,
DB8500_DMA_DEV19_USB_OTG_IEP_4_12,
DB8500_DMA_DEV18_USB_OTG_IEP_5_13,
DB8500_DMA_DEV17_USB_OTG_IEP_6_14,
DB8500_DMA_DEV16_USB_OTG_IEP_7_15,
DB8500_DMA_DEV39_USB_OTG_IEP_8
};
static int usb_db8500_tx_dma_cfg[] = {
DB8500_DMA_DEV38_USB_OTG_OEP_1_9,
DB8500_DMA_DEV37_USB_OTG_OEP_2_10,
DB8500_DMA_DEV36_USB_OTG_OEP_3_11,
DB8500_DMA_DEV19_USB_OTG_OEP_4_12,
DB8500_DMA_DEV18_USB_OTG_OEP_5_13,
DB8500_DMA_DEV17_USB_OTG_OEP_6_14,
DB8500_DMA_DEV16_USB_OTG_OEP_7_15,
DB8500_DMA_DEV39_USB_OTG_OEP_8
};
static const char *db8500_read_soc_id(void)
{
void __iomem *uid = __io_address(U8500_BB_UID_BASE);
return kasprintf(GFP_KERNEL, "%08x%08x%08x%08x%08x",
readl((u32 *)uid+1),
readl((u32 *)uid+1), readl((u32 *)uid+2),
readl((u32 *)uid+3), readl((u32 *)uid+4));
}
static struct device * __init db8500_soc_device_init(void)
{
const char *soc_id = db8500_read_soc_id();
return ux500_soc_device_init(soc_id);
}
/*
* This function is called from the board init
*/
struct device * __init u8500_init_devices(struct ab8500_platform_data *ab8500)
{
struct device *parent;
int i;
parent = db8500_soc_device_init();
db8500_add_rtc(parent);
db8500_add_gpios(parent);
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
platform_device_register_data(parent,
"cpufreq-u8500", -1, NULL, 0);
for (i = 0; i < ARRAY_SIZE(platform_devs); i++)
platform_devs[i]->dev.parent = parent;
db8500_prcmu_device.dev.platform_data = ab8500;
platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs));
return parent;
}
#ifdef CONFIG_MACH_UX500_DT
/* TODO: Once all pieces are DT:ed, remove completely. */
static struct device * __init u8500_of_init_devices(void)
{
struct device *parent = db8500_soc_device_init();
db8500_add_usb(parent, usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg);
platform_device_register_data(parent,
"cpufreq-u8500", -1, NULL, 0);
u8500_dma40_device.dev.parent = parent;
/*
* Devices to be DT:ed:
* u8500_dma40_device = todo
* db8500_pmu_device = done
* db8500_prcmu_device = done
*/
platform_device_register(&u8500_dma40_device);
return parent;
}
static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = {
/* Requires call-back bindings. */
OF_DEV_AUXDATA("arm,cortex-a9-pmu", 0, "arm-pmu", &db8500_pmu_platdata),
/* Requires DMA and call-back bindings. */
OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", &uart0_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", &uart1_plat),
OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", &uart2_plat),
/* Requires DMA bindings. */
OF_DEV_AUXDATA("arm,pl022", 0x80002000, "ssp0", &ssp0_plat),
OF_DEV_AUXDATA("arm,pl18x", 0x80126000, "sdi0", &mop500_sdi0_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80118000, "sdi1", &mop500_sdi1_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80005000, "sdi2", &mop500_sdi2_data),
OF_DEV_AUXDATA("arm,pl18x", 0x80114000, "sdi4", &mop500_sdi4_data),
/* Requires clock name bindings. */
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e000, "gpio.0", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8012e080, "gpio.1", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e000, "gpio.2", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e080, "gpio.3", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e100, "gpio.4", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8000e180, "gpio.5", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e000, "gpio.6", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0x8011e080, "gpio.7", NULL),
OF_DEV_AUXDATA("st,nomadik-gpio", 0xa03fe000, "gpio.8", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80004000, "nmk-i2c.0", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80122000, "nmk-i2c.1", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80128000, "nmk-i2c.2", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x80110000, "nmk-i2c.3", NULL),
OF_DEV_AUXDATA("st,nomadik-i2c", 0x8012a000, "nmk-i2c.4", NULL),
/* Requires device name bindings. */
OF_DEV_AUXDATA("stericsson,nmk_pinctrl", 0, "pinctrl-db8500", NULL),
/* Requires clock name and DMA bindings. */
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80123000,
"ux500-msp-i2s.0", &msp0_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80124000,
"ux500-msp-i2s.1", &msp1_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80117000,
"ux500-msp-i2s.2", &msp2_platform_data),
OF_DEV_AUXDATA("stericsson,ux500-msp-i2s", 0x80125000,
"ux500-msp-i2s.3", &msp3_platform_data),
{},
};
static const struct of_device_id u8500_local_bus_nodes[] = {
/* only create devices below soc node */
{ .compatible = "stericsson,db8500", },
{ .compatible = "stericsson,db8500-prcmu", },
{ .compatible = "simple-bus"},
{ },
};
static void __init u8500_init_machine(void)
{
struct device *parent = NULL;
/* Pinmaps must be in place before devices register */
if (of_machine_is_compatible("st-ericsson,mop500"))
mop500_pinmaps_init();
else if (of_machine_is_compatible("calaosystems,snowball-a9500"))
snowball_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,hrefv60+"))
hrefv60_pinmaps_init();
else if (of_machine_is_compatible("st-ericsson,ccu9540")) {}
/* TODO: Add pinmaps for ccu9540 board. */
/* TODO: Export SoC, USB, cpu-freq and DMA40 */
parent = u8500_of_init_devices();
/* automatically probe child nodes of db8500 device */
of_platform_populate(NULL, u8500_local_bus_nodes, u8500_auxdata_lookup, parent);
}
static const char * u8500_dt_board_compat[] = {
"calaosystems,snowball-a9500",
"st-ericsson,hrefv60+",
"st-ericsson,mop500",
"st-ericsson,ccu9540",
NULL,
};
DT_MACHINE_START(U8500_DT, "ST-Ericsson Ux5x0 platform (Device Tree Support)")
.map_io = u8500_map_io,
.init_irq = ux500_init_irq,
/* we re-use nomadik timer here */
.timer = &ux500_timer,
.handle_irq = gic_handle_irq,
.init_machine = u8500_init_machine,
.init_late = NULL,
.dt_compat = u8500_dt_board_compat,
MACHINE_END
#endif
View Git Blame Copy Permalink