mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
78b7611c4a
With these two lines in the reverse order the drives/block/ccis.c was oopsing in msi_free_irqs. Silly us calling writel on an area after we unmap it. BUG: unable to handle kernel paging request at virtual address f8b2200c printing eip: c01e9cc7 *pdpt = 0000000000003001 *pde = 0000000037e48067 *pte = 0000000000000000 Oops: 0002 [#1] SMP Modules linked in: cciss ipv6 parport_pc lp parport autofs4 i2c_dev i2c_core sunrpc loop dm_multipath button battery asus_acpi ac tg3 floppy sg dm_snapshot dm_zero dm_mirror ext3 jbd dm_mod ata_piix libata mptsas scsi_transport_sas mptspi scsi_transport_spi mptscsih mptbase sd_mod scsi_mod CPU: 1 EIP: 0060:[<c01e9cc7>] Not tainted VLI EFLAGS: 00010286 (2.6.22-rc2-gd2579053 #1) EIP is at msi_free_irqs+0x81/0xbe eax: f8b22000 ebx: f71f3180 ecx: f7fff280 edx: c1886eb8 esi: f7c4e800 edi: f7c4ec48 ebp: 00000002 esp: f5a0dec8 ds: 007b es: 007b fs: 00d8 gs: 0033 ss: 0068 Process rmmod (pid: 5286, ti=f5a0d000 task=c47d2550 task.ti=f5a0d000) Stack: 00000002 f8b72294 00000400 f8b69ca7 f8b6bc6c 00000002 00000000 00000000 00000000 00000000 00000000 f5a997f4 f8b69d61 f7c5a4b0 f7c4e848 f7c4e848 f7c4e800 f7c4e800 f8b72294 f7c4e848 f8b72294 c01e3cdf f7c4e848 c024c469 Call Trace: [<f8b69ca7>] cciss_shutdown+0xae/0xc3 [cciss] [<f8b69d61>] cciss_remove_one+0xa5/0x178 [cciss] [<c01e3cdf>] pci_device_remove+0x16/0x35 [<c024c469>] __device_release_driver+0x71/0x8e [<c024c56e>] driver_detach+0xa0/0xde [<c024bc5c>] bus_remove_driver+0x27/0x41 [<c01e3ef3>] pci_unregister_driver+0xb/0x13 [<f8b6a343>] cciss_cleanup+0xf/0x51 [cciss] [<c0139ced>] sys_delete_module+0x110/0x135 [<c0104c7a>] sysenter_past_esp+0x5f/0x85 Here's a patch that just reverses the 2 lines of code as Eric suggests. Please consider this for inclusion. Signed-off-by: Mike Miller <mike.miller@hp.com> Signed-off-by: Chase Maupin <chase.maupin@hp.com> Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
726 lines
18 KiB
C
726 lines
18 KiB
C
/*
|
|
* File: msi.c
|
|
* Purpose: PCI Message Signaled Interrupt (MSI)
|
|
*
|
|
* Copyright (C) 2003-2004 Intel
|
|
* Copyright (C) Tom Long Nguyen (tom.l.nguyen@intel.com)
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/smp.h>
|
|
|
|
#include <asm/errno.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "pci.h"
|
|
#include "msi.h"
|
|
|
|
static int pci_msi_enable = 1;
|
|
|
|
static void msi_set_enable(struct pci_dev *dev, int enable)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
|
|
control &= ~PCI_MSI_FLAGS_ENABLE;
|
|
if (enable)
|
|
control |= PCI_MSI_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
|
|
}
|
|
}
|
|
|
|
static void msix_set_enable(struct pci_dev *dev, int enable)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
if (pos) {
|
|
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
|
|
control &= ~PCI_MSIX_FLAGS_ENABLE;
|
|
if (enable)
|
|
control |= PCI_MSIX_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
|
|
}
|
|
}
|
|
|
|
static void msix_flush_writes(unsigned int irq)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
entry = get_irq_msi(irq);
|
|
BUG_ON(!entry || !entry->dev);
|
|
switch (entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
/* nothing to do */
|
|
break;
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
|
|
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
|
|
readl(entry->mask_base + offset);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void msi_set_mask_bit(unsigned int irq, int flag)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
entry = get_irq_msi(irq);
|
|
BUG_ON(!entry || !entry->dev);
|
|
switch (entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
if (entry->msi_attrib.maskbit) {
|
|
int pos;
|
|
u32 mask_bits;
|
|
|
|
pos = (long)entry->mask_base;
|
|
pci_read_config_dword(entry->dev, pos, &mask_bits);
|
|
mask_bits &= ~(1);
|
|
mask_bits |= flag;
|
|
pci_write_config_dword(entry->dev, pos, mask_bits);
|
|
} else {
|
|
msi_set_enable(entry->dev, !flag);
|
|
}
|
|
break;
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
int offset = entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE +
|
|
PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET;
|
|
writel(flag, entry->mask_base + offset);
|
|
readl(entry->mask_base + offset);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
entry->msi_attrib.masked = !!flag;
|
|
}
|
|
|
|
void read_msi_msg(unsigned int irq, struct msi_msg *msg)
|
|
{
|
|
struct msi_desc *entry = get_irq_msi(irq);
|
|
switch(entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
{
|
|
struct pci_dev *dev = entry->dev;
|
|
int pos = entry->msi_attrib.pos;
|
|
u16 data;
|
|
|
|
pci_read_config_dword(dev, msi_lower_address_reg(pos),
|
|
&msg->address_lo);
|
|
if (entry->msi_attrib.is_64) {
|
|
pci_read_config_dword(dev, msi_upper_address_reg(pos),
|
|
&msg->address_hi);
|
|
pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
|
|
} else {
|
|
msg->address_hi = 0;
|
|
pci_read_config_word(dev, msi_data_reg(pos, 1), &data);
|
|
}
|
|
msg->data = data;
|
|
break;
|
|
}
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
void __iomem *base;
|
|
base = entry->mask_base +
|
|
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
|
|
|
|
msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
|
|
msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
|
|
msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
void write_msi_msg(unsigned int irq, struct msi_msg *msg)
|
|
{
|
|
struct msi_desc *entry = get_irq_msi(irq);
|
|
switch (entry->msi_attrib.type) {
|
|
case PCI_CAP_ID_MSI:
|
|
{
|
|
struct pci_dev *dev = entry->dev;
|
|
int pos = entry->msi_attrib.pos;
|
|
|
|
pci_write_config_dword(dev, msi_lower_address_reg(pos),
|
|
msg->address_lo);
|
|
if (entry->msi_attrib.is_64) {
|
|
pci_write_config_dword(dev, msi_upper_address_reg(pos),
|
|
msg->address_hi);
|
|
pci_write_config_word(dev, msi_data_reg(pos, 1),
|
|
msg->data);
|
|
} else {
|
|
pci_write_config_word(dev, msi_data_reg(pos, 0),
|
|
msg->data);
|
|
}
|
|
break;
|
|
}
|
|
case PCI_CAP_ID_MSIX:
|
|
{
|
|
void __iomem *base;
|
|
base = entry->mask_base +
|
|
entry->msi_attrib.entry_nr * PCI_MSIX_ENTRY_SIZE;
|
|
|
|
writel(msg->address_lo,
|
|
base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET);
|
|
writel(msg->address_hi,
|
|
base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET);
|
|
writel(msg->data, base + PCI_MSIX_ENTRY_DATA_OFFSET);
|
|
break;
|
|
}
|
|
default:
|
|
BUG();
|
|
}
|
|
entry->msg = *msg;
|
|
}
|
|
|
|
void mask_msi_irq(unsigned int irq)
|
|
{
|
|
msi_set_mask_bit(irq, 1);
|
|
msix_flush_writes(irq);
|
|
}
|
|
|
|
void unmask_msi_irq(unsigned int irq)
|
|
{
|
|
msi_set_mask_bit(irq, 0);
|
|
msix_flush_writes(irq);
|
|
}
|
|
|
|
static int msi_free_irqs(struct pci_dev* dev);
|
|
|
|
|
|
static struct msi_desc* alloc_msi_entry(void)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
entry = kzalloc(sizeof(struct msi_desc), GFP_KERNEL);
|
|
if (!entry)
|
|
return NULL;
|
|
|
|
INIT_LIST_HEAD(&entry->list);
|
|
entry->irq = 0;
|
|
entry->dev = NULL;
|
|
|
|
return entry;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static void __pci_restore_msi_state(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
u16 control;
|
|
struct msi_desc *entry;
|
|
|
|
if (!dev->msi_enabled)
|
|
return;
|
|
|
|
entry = get_irq_msi(dev->irq);
|
|
pos = entry->msi_attrib.pos;
|
|
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msi_set_enable(dev, 0);
|
|
write_msi_msg(dev->irq, &entry->msg);
|
|
if (entry->msi_attrib.maskbit)
|
|
msi_set_mask_bit(dev->irq, entry->msi_attrib.masked);
|
|
|
|
pci_read_config_word(dev, pos + PCI_MSI_FLAGS, &control);
|
|
control &= ~(PCI_MSI_FLAGS_QSIZE | PCI_MSI_FLAGS_ENABLE);
|
|
if (entry->msi_attrib.maskbit || !entry->msi_attrib.masked)
|
|
control |= PCI_MSI_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSI_FLAGS, control);
|
|
}
|
|
|
|
static void __pci_restore_msix_state(struct pci_dev *dev)
|
|
{
|
|
int pos;
|
|
struct msi_desc *entry;
|
|
u16 control;
|
|
|
|
if (!dev->msix_enabled)
|
|
return;
|
|
|
|
/* route the table */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msix_set_enable(dev, 0);
|
|
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
write_msi_msg(entry->irq, &entry->msg);
|
|
msi_set_mask_bit(entry->irq, entry->msi_attrib.masked);
|
|
}
|
|
|
|
BUG_ON(list_empty(&dev->msi_list));
|
|
entry = list_entry(dev->msi_list.next, struct msi_desc, list);
|
|
pos = entry->msi_attrib.pos;
|
|
pci_read_config_word(dev, pos + PCI_MSIX_FLAGS, &control);
|
|
control &= ~PCI_MSIX_FLAGS_MASKALL;
|
|
control |= PCI_MSIX_FLAGS_ENABLE;
|
|
pci_write_config_word(dev, pos + PCI_MSIX_FLAGS, control);
|
|
}
|
|
|
|
void pci_restore_msi_state(struct pci_dev *dev)
|
|
{
|
|
__pci_restore_msi_state(dev);
|
|
__pci_restore_msix_state(dev);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
/**
|
|
* msi_capability_init - configure device's MSI capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
*
|
|
* Setup the MSI capability structure of device function with a single
|
|
* MSI irq, regardless of device function is capable of handling
|
|
* multiple messages. A return of zero indicates the successful setup
|
|
* of an entry zero with the new MSI irq or non-zero for otherwise.
|
|
**/
|
|
static int msi_capability_init(struct pci_dev *dev)
|
|
{
|
|
struct msi_desc *entry;
|
|
int pos, ret;
|
|
u16 control;
|
|
|
|
msi_set_enable(dev, 0); /* Ensure msi is disabled as I set it up */
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSI);
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
/* MSI Entry Initialization */
|
|
entry = alloc_msi_entry();
|
|
if (!entry)
|
|
return -ENOMEM;
|
|
|
|
entry->msi_attrib.type = PCI_CAP_ID_MSI;
|
|
entry->msi_attrib.is_64 = is_64bit_address(control);
|
|
entry->msi_attrib.entry_nr = 0;
|
|
entry->msi_attrib.maskbit = is_mask_bit_support(control);
|
|
entry->msi_attrib.masked = 1;
|
|
entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */
|
|
entry->msi_attrib.pos = pos;
|
|
if (is_mask_bit_support(control)) {
|
|
entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos,
|
|
is_64bit_address(control));
|
|
}
|
|
entry->dev = dev;
|
|
if (entry->msi_attrib.maskbit) {
|
|
unsigned int maskbits, temp;
|
|
/* All MSIs are unmasked by default, Mask them all */
|
|
pci_read_config_dword(dev,
|
|
msi_mask_bits_reg(pos, is_64bit_address(control)),
|
|
&maskbits);
|
|
temp = (1 << multi_msi_capable(control));
|
|
temp = ((temp - 1) & ~temp);
|
|
maskbits |= temp;
|
|
pci_write_config_dword(dev,
|
|
msi_mask_bits_reg(pos, is_64bit_address(control)),
|
|
maskbits);
|
|
}
|
|
list_add_tail(&entry->list, &dev->msi_list);
|
|
|
|
/* Configure MSI capability structure */
|
|
ret = arch_setup_msi_irqs(dev, 1, PCI_CAP_ID_MSI);
|
|
if (ret) {
|
|
msi_free_irqs(dev);
|
|
return ret;
|
|
}
|
|
|
|
/* Set MSI enabled bits */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msi_set_enable(dev, 1);
|
|
dev->msi_enabled = 1;
|
|
|
|
dev->irq = entry->irq;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* msix_capability_init - configure device's MSI-X capability
|
|
* @dev: pointer to the pci_dev data structure of MSI-X device function
|
|
* @entries: pointer to an array of struct msix_entry entries
|
|
* @nvec: number of @entries
|
|
*
|
|
* Setup the MSI-X capability structure of device function with a
|
|
* single MSI-X irq. A return of zero indicates the successful setup of
|
|
* requested MSI-X entries with allocated irqs or non-zero for otherwise.
|
|
**/
|
|
static int msix_capability_init(struct pci_dev *dev,
|
|
struct msix_entry *entries, int nvec)
|
|
{
|
|
struct msi_desc *entry;
|
|
int pos, i, j, nr_entries, ret;
|
|
unsigned long phys_addr;
|
|
u32 table_offset;
|
|
u16 control;
|
|
u8 bir;
|
|
void __iomem *base;
|
|
|
|
msix_set_enable(dev, 0);/* Ensure msix is disabled as I set it up */
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
/* Request & Map MSI-X table region */
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
nr_entries = multi_msix_capable(control);
|
|
|
|
pci_read_config_dword(dev, msix_table_offset_reg(pos), &table_offset);
|
|
bir = (u8)(table_offset & PCI_MSIX_FLAGS_BIRMASK);
|
|
table_offset &= ~PCI_MSIX_FLAGS_BIRMASK;
|
|
phys_addr = pci_resource_start (dev, bir) + table_offset;
|
|
base = ioremap_nocache(phys_addr, nr_entries * PCI_MSIX_ENTRY_SIZE);
|
|
if (base == NULL)
|
|
return -ENOMEM;
|
|
|
|
/* MSI-X Table Initialization */
|
|
for (i = 0; i < nvec; i++) {
|
|
entry = alloc_msi_entry();
|
|
if (!entry)
|
|
break;
|
|
|
|
j = entries[i].entry;
|
|
entry->msi_attrib.type = PCI_CAP_ID_MSIX;
|
|
entry->msi_attrib.is_64 = 1;
|
|
entry->msi_attrib.entry_nr = j;
|
|
entry->msi_attrib.maskbit = 1;
|
|
entry->msi_attrib.masked = 1;
|
|
entry->msi_attrib.default_irq = dev->irq;
|
|
entry->msi_attrib.pos = pos;
|
|
entry->dev = dev;
|
|
entry->mask_base = base;
|
|
|
|
list_add_tail(&entry->list, &dev->msi_list);
|
|
}
|
|
|
|
ret = arch_setup_msi_irqs(dev, nvec, PCI_CAP_ID_MSIX);
|
|
if (ret) {
|
|
int avail = 0;
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
if (entry->irq != 0) {
|
|
avail++;
|
|
}
|
|
}
|
|
|
|
msi_free_irqs(dev);
|
|
|
|
/* If we had some success report the number of irqs
|
|
* we succeeded in setting up.
|
|
*/
|
|
if (avail == 0)
|
|
avail = ret;
|
|
return avail;
|
|
}
|
|
|
|
i = 0;
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
entries[i].vector = entry->irq;
|
|
set_irq_msi(entry->irq, entry);
|
|
i++;
|
|
}
|
|
/* Set MSI-X enabled bits */
|
|
pci_intx(dev, 0); /* disable intx */
|
|
msix_set_enable(dev, 1);
|
|
dev->msix_enabled = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_msi_check_device - check whether MSI may be enabled on a device
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
* @nvec: how many MSIs have been requested ?
|
|
* @type: are we checking for MSI or MSI-X ?
|
|
*
|
|
* Look at global flags, the device itself, and its parent busses
|
|
* to determine if MSI/-X are supported for the device. If MSI/-X is
|
|
* supported return 0, else return an error code.
|
|
**/
|
|
static int pci_msi_check_device(struct pci_dev* dev, int nvec, int type)
|
|
{
|
|
struct pci_bus *bus;
|
|
int ret;
|
|
|
|
/* MSI must be globally enabled and supported by the device */
|
|
if (!pci_msi_enable || !dev || dev->no_msi)
|
|
return -EINVAL;
|
|
|
|
/*
|
|
* You can't ask to have 0 or less MSIs configured.
|
|
* a) it's stupid ..
|
|
* b) the list manipulation code assumes nvec >= 1.
|
|
*/
|
|
if (nvec < 1)
|
|
return -ERANGE;
|
|
|
|
/* Any bridge which does NOT route MSI transactions from it's
|
|
* secondary bus to it's primary bus must set NO_MSI flag on
|
|
* the secondary pci_bus.
|
|
* We expect only arch-specific PCI host bus controller driver
|
|
* or quirks for specific PCI bridges to be setting NO_MSI.
|
|
*/
|
|
for (bus = dev->bus; bus; bus = bus->parent)
|
|
if (bus->bus_flags & PCI_BUS_FLAGS_NO_MSI)
|
|
return -EINVAL;
|
|
|
|
ret = arch_msi_check_device(dev, nvec, type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (!pci_find_capability(dev, type))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_msi - configure device's MSI capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI device function
|
|
*
|
|
* Setup the MSI capability structure of device function with
|
|
* a single MSI irq upon its software driver call to request for
|
|
* MSI mode enabled on its hardware device function. A return of zero
|
|
* indicates the successful setup of an entry zero with the new MSI
|
|
* irq or non-zero for otherwise.
|
|
**/
|
|
int pci_enable_msi(struct pci_dev* dev)
|
|
{
|
|
int status;
|
|
|
|
status = pci_msi_check_device(dev, 1, PCI_CAP_ID_MSI);
|
|
if (status)
|
|
return status;
|
|
|
|
WARN_ON(!!dev->msi_enabled);
|
|
|
|
/* Check whether driver already requested for MSI-X irqs */
|
|
if (dev->msix_enabled) {
|
|
printk(KERN_INFO "PCI: %s: Can't enable MSI. "
|
|
"Device already has MSI-X enabled\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
status = msi_capability_init(dev);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(pci_enable_msi);
|
|
|
|
void pci_disable_msi(struct pci_dev* dev)
|
|
{
|
|
struct msi_desc *entry;
|
|
int default_irq;
|
|
|
|
if (!pci_msi_enable || !dev || !dev->msi_enabled)
|
|
return;
|
|
|
|
msi_set_enable(dev, 0);
|
|
pci_intx(dev, 1); /* enable intx */
|
|
dev->msi_enabled = 0;
|
|
|
|
BUG_ON(list_empty(&dev->msi_list));
|
|
entry = list_entry(dev->msi_list.next, struct msi_desc, list);
|
|
if (!entry->dev || entry->msi_attrib.type != PCI_CAP_ID_MSI) {
|
|
return;
|
|
}
|
|
|
|
default_irq = entry->msi_attrib.default_irq;
|
|
msi_free_irqs(dev);
|
|
|
|
/* Restore dev->irq to its default pin-assertion irq */
|
|
dev->irq = default_irq;
|
|
}
|
|
EXPORT_SYMBOL(pci_disable_msi);
|
|
|
|
static int msi_free_irqs(struct pci_dev* dev)
|
|
{
|
|
struct msi_desc *entry, *tmp;
|
|
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
if (entry->irq)
|
|
BUG_ON(irq_has_action(entry->irq));
|
|
}
|
|
|
|
arch_teardown_msi_irqs(dev);
|
|
|
|
list_for_each_entry_safe(entry, tmp, &dev->msi_list, list) {
|
|
if (entry->msi_attrib.type == PCI_CAP_ID_MSIX) {
|
|
writel(1, entry->mask_base + entry->msi_attrib.entry_nr
|
|
* PCI_MSIX_ENTRY_SIZE
|
|
+ PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
|
|
|
|
if (list_is_last(&entry->list, &dev->msi_list))
|
|
iounmap(entry->mask_base);
|
|
}
|
|
list_del(&entry->list);
|
|
kfree(entry);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* pci_enable_msix - configure device's MSI-X capability structure
|
|
* @dev: pointer to the pci_dev data structure of MSI-X device function
|
|
* @entries: pointer to an array of MSI-X entries
|
|
* @nvec: number of MSI-X irqs requested for allocation by device driver
|
|
*
|
|
* Setup the MSI-X capability structure of device function with the number
|
|
* of requested irqs upon its software driver call to request for
|
|
* MSI-X mode enabled on its hardware device function. A return of zero
|
|
* indicates the successful configuration of MSI-X capability structure
|
|
* with new allocated MSI-X irqs. A return of < 0 indicates a failure.
|
|
* Or a return of > 0 indicates that driver request is exceeding the number
|
|
* of irqs available. Driver should use the returned value to re-send
|
|
* its request.
|
|
**/
|
|
int pci_enable_msix(struct pci_dev* dev, struct msix_entry *entries, int nvec)
|
|
{
|
|
int status, pos, nr_entries;
|
|
int i, j;
|
|
u16 control;
|
|
|
|
if (!entries)
|
|
return -EINVAL;
|
|
|
|
status = pci_msi_check_device(dev, nvec, PCI_CAP_ID_MSIX);
|
|
if (status)
|
|
return status;
|
|
|
|
pos = pci_find_capability(dev, PCI_CAP_ID_MSIX);
|
|
pci_read_config_word(dev, msi_control_reg(pos), &control);
|
|
nr_entries = multi_msix_capable(control);
|
|
if (nvec > nr_entries)
|
|
return -EINVAL;
|
|
|
|
/* Check for any invalid entries */
|
|
for (i = 0; i < nvec; i++) {
|
|
if (entries[i].entry >= nr_entries)
|
|
return -EINVAL; /* invalid entry */
|
|
for (j = i + 1; j < nvec; j++) {
|
|
if (entries[i].entry == entries[j].entry)
|
|
return -EINVAL; /* duplicate entry */
|
|
}
|
|
}
|
|
WARN_ON(!!dev->msix_enabled);
|
|
|
|
/* Check whether driver already requested for MSI irq */
|
|
if (dev->msi_enabled) {
|
|
printk(KERN_INFO "PCI: %s: Can't enable MSI-X. "
|
|
"Device already has an MSI irq assigned\n",
|
|
pci_name(dev));
|
|
return -EINVAL;
|
|
}
|
|
status = msix_capability_init(dev, entries, nvec);
|
|
return status;
|
|
}
|
|
EXPORT_SYMBOL(pci_enable_msix);
|
|
|
|
static void msix_free_all_irqs(struct pci_dev *dev)
|
|
{
|
|
msi_free_irqs(dev);
|
|
}
|
|
|
|
void pci_disable_msix(struct pci_dev* dev)
|
|
{
|
|
if (!pci_msi_enable || !dev || !dev->msix_enabled)
|
|
return;
|
|
|
|
msix_set_enable(dev, 0);
|
|
pci_intx(dev, 1); /* enable intx */
|
|
dev->msix_enabled = 0;
|
|
|
|
msix_free_all_irqs(dev);
|
|
}
|
|
EXPORT_SYMBOL(pci_disable_msix);
|
|
|
|
/**
|
|
* msi_remove_pci_irq_vectors - reclaim MSI(X) irqs to unused state
|
|
* @dev: pointer to the pci_dev data structure of MSI(X) device function
|
|
*
|
|
* Being called during hotplug remove, from which the device function
|
|
* is hot-removed. All previous assigned MSI/MSI-X irqs, if
|
|
* allocated for this device function, are reclaimed to unused state,
|
|
* which may be used later on.
|
|
**/
|
|
void msi_remove_pci_irq_vectors(struct pci_dev* dev)
|
|
{
|
|
if (!pci_msi_enable || !dev)
|
|
return;
|
|
|
|
if (dev->msi_enabled)
|
|
msi_free_irqs(dev);
|
|
|
|
if (dev->msix_enabled)
|
|
msix_free_all_irqs(dev);
|
|
}
|
|
|
|
void pci_no_msi(void)
|
|
{
|
|
pci_msi_enable = 0;
|
|
}
|
|
|
|
void pci_msi_init_pci_dev(struct pci_dev *dev)
|
|
{
|
|
INIT_LIST_HEAD(&dev->msi_list);
|
|
}
|
|
|
|
|
|
/* Arch hooks */
|
|
|
|
int __attribute__ ((weak))
|
|
arch_msi_check_device(struct pci_dev* dev, int nvec, int type)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __attribute__ ((weak))
|
|
arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *entry)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
int __attribute__ ((weak))
|
|
arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type)
|
|
{
|
|
struct msi_desc *entry;
|
|
int ret;
|
|
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
ret = arch_setup_msi_irq(dev, entry);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void __attribute__ ((weak)) arch_teardown_msi_irq(unsigned int irq)
|
|
{
|
|
return;
|
|
}
|
|
|
|
void __attribute__ ((weak))
|
|
arch_teardown_msi_irqs(struct pci_dev *dev)
|
|
{
|
|
struct msi_desc *entry;
|
|
|
|
list_for_each_entry(entry, &dev->msi_list, list) {
|
|
if (entry->irq != 0)
|
|
arch_teardown_msi_irq(entry->irq);
|
|
}
|
|
}
|