renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
439ca3a4b1
linux-next/drivers/net/wireless/iwlwifi/iwl-agn-rs.h
Daniel C Halperin 5027309b55 iwlwifi: remove 60 Mbps from sband bitrates table 
ieee80211_supported_band is supposed to only contain legacy rates in the
bitrates table (HT rates go in the ieee80211_sta_ht_cap substruct).  Make
iwlwifi driver obey this restriction by removing the 60 Mbps rate. Also, clean
up a few pieces of other code that formerly relied on 60 Mbps being in
sband->bitrates.

Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-31 14:42:09 -04:00

404 lines
12 KiB
C
Raw Blame History

/******************************************************************************
*
* Copyright(c) 2003 - 2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#ifndef __iwl_agn_rs_h__
#define __iwl_agn_rs_h__
struct iwl_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 plcp_siso; /* uCode API: IWL_RATE_SISO_6M_PLCP, etc. */
u8 plcp_mimo2; /* uCode API: IWL_RATE_MIMO2_6M_PLCP, etc. */
u8 plcp_mimo3; /* uCode API: IWL_RATE_MIMO3_6M_PLCP, etc. */
u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
u8 prev_ieee; /* previous rate in IEEE speeds */
u8 next_ieee; /* next rate in IEEE speeds */
u8 prev_rs; /* previous rate used in rs algo */
u8 next_rs; /* next rate used in rs algo */
u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
u8 next_rs_tgg; /* next rate used in TGG rs algo */
};
struct iwl3945_rate_info {
u8 plcp; /* uCode API: IWL_RATE_6M_PLCP, etc. */
u8 ieee; /* MAC header: IWL_RATE_6M_IEEE, etc. */
u8 prev_ieee; /* previous rate in IEEE speeds */
u8 next_ieee; /* next rate in IEEE speeds */
u8 prev_rs; /* previous rate used in rs algo */
u8 next_rs; /* next rate used in rs algo */
u8 prev_rs_tgg; /* previous rate used in TGG rs algo */
u8 next_rs_tgg; /* next rate used in TGG rs algo */
u8 table_rs_index; /* index in rate scale table cmd */
u8 prev_table_rs; /* prev in rate table cmd */
};
/*
* These serve as indexes into
* struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
*/
enum {
IWL_RATE_1M_INDEX = 0,
IWL_RATE_2M_INDEX,
IWL_RATE_5M_INDEX,
IWL_RATE_11M_INDEX,
IWL_RATE_6M_INDEX,
IWL_RATE_9M_INDEX,
IWL_RATE_12M_INDEX,
IWL_RATE_18M_INDEX,
IWL_RATE_24M_INDEX,
IWL_RATE_36M_INDEX,
IWL_RATE_48M_INDEX,
IWL_RATE_54M_INDEX,
IWL_RATE_60M_INDEX,
IWL_RATE_COUNT, /*FIXME:RS:change to IWL_RATE_INDEX_COUNT,*/
IWL_RATE_COUNT_LEGACY = IWL_RATE_COUNT - 1, /* Excluding 60M */
IWL_RATE_COUNT_3945 = IWL_RATE_COUNT - 1,
IWL_RATE_INVM_INDEX = IWL_RATE_COUNT,
IWL_RATE_INVALID = IWL_RATE_COUNT,
};
enum {
IWL_RATE_6M_INDEX_TABLE = 0,
IWL_RATE_9M_INDEX_TABLE,
IWL_RATE_12M_INDEX_TABLE,
IWL_RATE_18M_INDEX_TABLE,
IWL_RATE_24M_INDEX_TABLE,
IWL_RATE_36M_INDEX_TABLE,
IWL_RATE_48M_INDEX_TABLE,
IWL_RATE_54M_INDEX_TABLE,
IWL_RATE_1M_INDEX_TABLE,
IWL_RATE_2M_INDEX_TABLE,
IWL_RATE_5M_INDEX_TABLE,
IWL_RATE_11M_INDEX_TABLE,
IWL_RATE_INVM_INDEX_TABLE = IWL_RATE_INVM_INDEX - 1,
};
enum {
IWL_FIRST_OFDM_RATE = IWL_RATE_6M_INDEX,
IWL39_LAST_OFDM_RATE = IWL_RATE_54M_INDEX,
IWL_LAST_OFDM_RATE = IWL_RATE_60M_INDEX,
IWL_FIRST_CCK_RATE = IWL_RATE_1M_INDEX,
IWL_LAST_CCK_RATE = IWL_RATE_11M_INDEX,
};
/* #define vs. enum to keep from defaulting to 'large integer' */
#define IWL_RATE_6M_MASK (1 << IWL_RATE_6M_INDEX)
#define IWL_RATE_9M_MASK (1 << IWL_RATE_9M_INDEX)
#define IWL_RATE_12M_MASK (1 << IWL_RATE_12M_INDEX)
#define IWL_RATE_18M_MASK (1 << IWL_RATE_18M_INDEX)
#define IWL_RATE_24M_MASK (1 << IWL_RATE_24M_INDEX)
#define IWL_RATE_36M_MASK (1 << IWL_RATE_36M_INDEX)
#define IWL_RATE_48M_MASK (1 << IWL_RATE_48M_INDEX)
#define IWL_RATE_54M_MASK (1 << IWL_RATE_54M_INDEX)
#define IWL_RATE_60M_MASK (1 << IWL_RATE_60M_INDEX)
#define IWL_RATE_1M_MASK (1 << IWL_RATE_1M_INDEX)
#define IWL_RATE_2M_MASK (1 << IWL_RATE_2M_INDEX)
#define IWL_RATE_5M_MASK (1 << IWL_RATE_5M_INDEX)
#define IWL_RATE_11M_MASK (1 << IWL_RATE_11M_INDEX)
/* uCode API values for legacy bit rates, both OFDM and CCK */
enum {
IWL_RATE_6M_PLCP = 13,
IWL_RATE_9M_PLCP = 15,
IWL_RATE_12M_PLCP = 5,
IWL_RATE_18M_PLCP = 7,
IWL_RATE_24M_PLCP = 9,
IWL_RATE_36M_PLCP = 11,
IWL_RATE_48M_PLCP = 1,
IWL_RATE_54M_PLCP = 3,
IWL_RATE_60M_PLCP = 3,/*FIXME:RS:should be removed*/
IWL_RATE_1M_PLCP = 10,
IWL_RATE_2M_PLCP = 20,
IWL_RATE_5M_PLCP = 55,
IWL_RATE_11M_PLCP = 110,
/*FIXME:RS:change to IWL_RATE_LEGACY_??M_PLCP */
/*FIXME:RS:add IWL_RATE_LEGACY_INVM_PLCP = 0,*/
};
/* uCode API values for OFDM high-throughput (HT) bit rates */
enum {
IWL_RATE_SISO_6M_PLCP = 0,
IWL_RATE_SISO_12M_PLCP = 1,
IWL_RATE_SISO_18M_PLCP = 2,
IWL_RATE_SISO_24M_PLCP = 3,
IWL_RATE_SISO_36M_PLCP = 4,
IWL_RATE_SISO_48M_PLCP = 5,
IWL_RATE_SISO_54M_PLCP = 6,
IWL_RATE_SISO_60M_PLCP = 7,
IWL_RATE_MIMO2_6M_PLCP = 0x8,
IWL_RATE_MIMO2_12M_PLCP = 0x9,
IWL_RATE_MIMO2_18M_PLCP = 0xa,
IWL_RATE_MIMO2_24M_PLCP = 0xb,
IWL_RATE_MIMO2_36M_PLCP = 0xc,
IWL_RATE_MIMO2_48M_PLCP = 0xd,
IWL_RATE_MIMO2_54M_PLCP = 0xe,
IWL_RATE_MIMO2_60M_PLCP = 0xf,
IWL_RATE_MIMO3_6M_PLCP = 0x10,
IWL_RATE_MIMO3_12M_PLCP = 0x11,
IWL_RATE_MIMO3_18M_PLCP = 0x12,
IWL_RATE_MIMO3_24M_PLCP = 0x13,
IWL_RATE_MIMO3_36M_PLCP = 0x14,
IWL_RATE_MIMO3_48M_PLCP = 0x15,
IWL_RATE_MIMO3_54M_PLCP = 0x16,
IWL_RATE_MIMO3_60M_PLCP = 0x17,
IWL_RATE_SISO_INVM_PLCP,
IWL_RATE_MIMO2_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
IWL_RATE_MIMO3_INVM_PLCP = IWL_RATE_SISO_INVM_PLCP,
};
/* MAC header values for bit rates */
enum {
IWL_RATE_6M_IEEE = 12,
IWL_RATE_9M_IEEE = 18,
IWL_RATE_12M_IEEE = 24,
IWL_RATE_18M_IEEE = 36,
IWL_RATE_24M_IEEE = 48,
IWL_RATE_36M_IEEE = 72,
IWL_RATE_48M_IEEE = 96,
IWL_RATE_54M_IEEE = 108,
IWL_RATE_60M_IEEE = 120,
IWL_RATE_1M_IEEE = 2,
IWL_RATE_2M_IEEE = 4,
IWL_RATE_5M_IEEE = 11,
IWL_RATE_11M_IEEE = 22,
};
#define IWL_CCK_BASIC_RATES_MASK \
(IWL_RATE_1M_MASK | \
IWL_RATE_2M_MASK)
#define IWL_CCK_RATES_MASK \
(IWL_BASIC_RATES_MASK | \
IWL_RATE_5M_MASK | \
IWL_RATE_11M_MASK)
#define IWL_OFDM_BASIC_RATES_MASK \
(IWL_RATE_6M_MASK | \
IWL_RATE_12M_MASK | \
IWL_RATE_24M_MASK)
#define IWL_OFDM_RATES_MASK \
(IWL_OFDM_BASIC_RATES_MASK | \
IWL_RATE_9M_MASK | \
IWL_RATE_18M_MASK | \
IWL_RATE_36M_MASK | \
IWL_RATE_48M_MASK | \
IWL_RATE_54M_MASK)
#define IWL_BASIC_RATES_MASK \
(IWL_OFDM_BASIC_RATES_MASK | \
IWL_CCK_BASIC_RATES_MASK)
#define IWL_RATES_MASK ((1 << IWL_RATE_COUNT) - 1)
#define IWL_INVALID_VALUE -1
#define IWL_MIN_RSSI_VAL -100
#define IWL_MAX_RSSI_VAL 0
/* These values specify how many Tx frame attempts before
* searching for a new modulation mode */
#define IWL_LEGACY_FAILURE_LIMIT 160
#define IWL_LEGACY_SUCCESS_LIMIT 480
#define IWL_LEGACY_TABLE_COUNT 160
#define IWL_NONE_LEGACY_FAILURE_LIMIT 400
#define IWL_NONE_LEGACY_SUCCESS_LIMIT 4500
#define IWL_NONE_LEGACY_TABLE_COUNT 1500
/* Success ratio (ACKed / attempted tx frames) values (perfect is 128 * 100) */
#define IWL_RS_GOOD_RATIO 12800 /* 100% */
#define IWL_RATE_SCALE_SWITCH 10880 /* 85% */
#define IWL_RATE_HIGH_TH 10880 /* 85% */
#define IWL_RATE_INCREASE_TH 6400 /* 50% */
#define IWL_RATE_DECREASE_TH 1920 /* 15% */
/* possible actions when in legacy mode */
#define IWL_LEGACY_SWITCH_ANTENNA1 0
#define IWL_LEGACY_SWITCH_ANTENNA2 1
#define IWL_LEGACY_SWITCH_SISO 2
#define IWL_LEGACY_SWITCH_MIMO2_AB 3
#define IWL_LEGACY_SWITCH_MIMO2_AC 4
#define IWL_LEGACY_SWITCH_MIMO2_BC 5
#define IWL_LEGACY_SWITCH_MIMO3_ABC 6
/* possible actions when in siso mode */
#define IWL_SISO_SWITCH_ANTENNA1 0
#define IWL_SISO_SWITCH_ANTENNA2 1
#define IWL_SISO_SWITCH_MIMO2_AB 2
#define IWL_SISO_SWITCH_MIMO2_AC 3
#define IWL_SISO_SWITCH_MIMO2_BC 4
#define IWL_SISO_SWITCH_GI 5
#define IWL_SISO_SWITCH_MIMO3_ABC 6
/* possible actions when in mimo mode */
#define IWL_MIMO2_SWITCH_ANTENNA1 0
#define IWL_MIMO2_SWITCH_ANTENNA2 1
#define IWL_MIMO2_SWITCH_SISO_A 2
#define IWL_MIMO2_SWITCH_SISO_B 3
#define IWL_MIMO2_SWITCH_SISO_C 4
#define IWL_MIMO2_SWITCH_GI 5
#define IWL_MIMO2_SWITCH_MIMO3_ABC 6
/* possible actions when in mimo3 mode */
#define IWL_MIMO3_SWITCH_ANTENNA1 0
#define IWL_MIMO3_SWITCH_ANTENNA2 1
#define IWL_MIMO3_SWITCH_SISO_A 2
#define IWL_MIMO3_SWITCH_SISO_B 3
#define IWL_MIMO3_SWITCH_SISO_C 4
#define IWL_MIMO3_SWITCH_MIMO2_AB 5
#define IWL_MIMO3_SWITCH_MIMO2_AC 6
#define IWL_MIMO3_SWITCH_MIMO2_BC 7
#define IWL_MIMO3_SWITCH_GI 8
#define IWL_MAX_11N_MIMO3_SEARCH IWL_MIMO3_SWITCH_GI
#define IWL_MAX_SEARCH IWL_MIMO2_SWITCH_MIMO3_ABC
/*FIXME:RS:add possible actions for MIMO3*/
#define IWL_ACTION_LIMIT 3 /* # possible actions */
#define LQ_SIZE 2 /* 2 mode tables: "Active" and "Search" */
/* load per tid defines for A-MPDU activation */
#define IWL_AGG_TPT_THREHOLD 0
#define IWL_AGG_LOAD_THRESHOLD 10
#define IWL_AGG_ALL_TID 0xff
#define TID_QUEUE_CELL_SPACING 50 /*mS */
#define TID_QUEUE_MAX_SIZE 20
#define TID_ROUND_VALUE 5 /* mS */
#define TID_MAX_LOAD_COUNT 8
#define TID_MAX_TIME_DIFF ((TID_QUEUE_MAX_SIZE - 1) * TID_QUEUE_CELL_SPACING)
#define TIME_WRAP_AROUND(x, y) (((y) > (x)) ? (y) - (x) : (0-(x)) + (y))
extern const struct iwl_rate_info iwl_rates[IWL_RATE_COUNT];
extern const struct iwl3945_rate_info iwl3945_rates[IWL_RATE_COUNT_3945];
enum iwl_table_type {
LQ_NONE,
LQ_G, /* legacy types */
LQ_A,
LQ_SISO, /* high-throughput types */
LQ_MIMO2,
LQ_MIMO3,
LQ_MAX,
};
#define is_legacy(tbl) (((tbl) == LQ_G) || ((tbl) == LQ_A))
#define is_siso(tbl) ((tbl) == LQ_SISO)
#define is_mimo2(tbl) ((tbl) == LQ_MIMO2)
#define is_mimo3(tbl) ((tbl) == LQ_MIMO3)
#define is_mimo(tbl) (is_mimo2(tbl) || is_mimo3(tbl))
#define is_Ht(tbl) (is_siso(tbl) || is_mimo(tbl))
#define is_a_band(tbl) ((tbl) == LQ_A)
#define is_g_and(tbl) ((tbl) == LQ_G)
#define ANT_NONE 0x0
#define ANT_A BIT(0)
#define ANT_B BIT(1)
#define ANT_AB (ANT_A | ANT_B)
#define ANT_C BIT(2)
#define ANT_AC (ANT_A | ANT_C)
#define ANT_BC (ANT_B | ANT_C)
#define ANT_ABC (ANT_AB | ANT_C)
#define IWL_MAX_MCS_DISPLAY_SIZE 12
struct iwl_rate_mcs_info {
char mbps[IWL_MAX_MCS_DISPLAY_SIZE];
char mcs[IWL_MAX_MCS_DISPLAY_SIZE];
};
static inline u8 num_of_ant(u8 mask)
{
return !!((mask) & ANT_A) +
!!((mask) & ANT_B) +
!!((mask) & ANT_C);
}
static inline u8 first_antenna(u8 mask)
{
if (mask & ANT_A)
return ANT_A;
if (mask & ANT_B)
return ANT_B;
return ANT_C;
}
static inline u8 iwl_get_prev_ieee_rate(u8 rate_index)
{
u8 rate = iwl_rates[rate_index].prev_ieee;
if (rate == IWL_RATE_INVALID)
rate = rate_index;
return rate;
}
static inline u8 iwl3945_get_prev_ieee_rate(u8 rate_index)
{
u8 rate = iwl3945_rates[rate_index].prev_ieee;
if (rate == IWL_RATE_INVALID)
rate = rate_index;
return rate;
}
/**
* iwl3945_rate_scale_init - Initialize the rate scale table based on assoc info
*
* The specific throughput table used is based on the type of network
* the associated with, including A, B, G, and G w/ TGG protection
*/
extern void iwl3945_rate_scale_init(struct ieee80211_hw *hw, s32 sta_id);
/**
* iwl_rate_control_register - Register the rate control algorithm callbacks
*
* Since the rate control algorithm is hardware specific, there is no need
* or reason to place it as a stand alone module. The driver can call
* iwl_rate_control_register in order to register the rate control callbacks
* with the mac80211 subsystem. This should be performed prior to calling
* ieee80211_register_hw
*
*/
extern int iwlagn_rate_control_register(void);
extern int iwl3945_rate_control_register(void);
/**
* iwl_rate_control_unregister - Unregister the rate control callbacks
*
* This should be called after calling ieee80211_unregister_hw, but before
* the driver is unloaded.
*/
extern void iwlagn_rate_control_unregister(void);
extern void iwl3945_rate_control_unregister(void);
#endif /* __iwl_agn__rs__ */
View Git Blame Copy Permalink