2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
linux-next/net/dsa
Vladimir Oltean 67c2404922 net: dsa: felix: create a template for the DSA tags on xmit
With this patch we try to kill 2 birds with 1 stone.

First of all, some switches that use tag_ocelot.c don't have the exact
same bitfield layout for the DSA tags. The destination ports field is
different for Seville VSC9953 for example. So the choices are to either
duplicate tag_ocelot.c into a new tag_seville.c (sub-optimal) or somehow
take into account a supposed ocelot->dest_ports_offset when packing this
field into the DSA injection header (again not ideal).

Secondly, tag_ocelot.c already needs to memset a 128-bit area to zero
and call some packing() functions of dubious performance in the
fastpath. And most of the values it needs to pack are pretty much
constant (BYPASS=1, SRC_PORT=CPU, DEST=port index). So it would be good
if we could improve that.

The proposed solution is to allocate a memory area per port at probe
time, initialize that with the statically defined bits as per chip
hardware revision, and just perform a simpler memcpy in the fastpath.

Other alternatives have been analyzed, such as:
- Create a separate tag_seville.c: too much code duplication for just 1
  bit field difference.
- Create a separate DSA_TAG_PROTO_SEVILLE under tag_ocelot.c, just like
  tag_brcm.c, which would have a separate .xmit function. Again, too
  much code duplication for just 1 bit field difference.
- Allocate the template from the init function of the tag_ocelot.c
  module, instead of from the driver: couldn't figure out a method of
  accessing the correct port template corresponding to the correct
  tagger in the .xmit function.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2020-07-13 17:40:01 -07:00
..
dsa2.c devlink: Replace devlink_port_attrs_set parameters with a struct 2020-07-09 13:15:29 -07:00
dsa_priv.h net: dsa: Add __percpu property to prevent warnings 2020-07-05 15:31:58 -07:00
dsa.c net: dsa: introduce a dsa_port_from_netdev public helper 2020-05-07 17:31:57 -07:00
Kconfig net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag 2020-07-08 15:36:19 -07:00
Makefile net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag 2020-07-08 15:36:19 -07:00
master.c net: change addr_list_lock back to static key 2020-06-09 12:59:45 -07:00
port.c net: dsa: provide an option for drivers to always receive bridge VLANs 2020-05-12 13:08:07 -07:00
slave.c net: dsa: Improve subordinate PHY error message 2020-06-30 12:44:20 -07:00
switch.c net: dsa: permit cross-chip bridging between all trees in the system 2020-05-10 19:52:33 -07:00
tag_8021q.c net: dsa: tag_8021q: stop restoring VLANs from bridge 2020-05-29 16:45:46 -07:00
tag_ar9331.c net: dsa: tag_ar9331: Make sure there is headroom for tag 2020-02-14 07:34:51 -08:00
tag_brcm.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2020-03-25 18:58:11 -07:00
tag_dsa.c dsa: Cleanup unneeded table and make tag structures static 2019-04-28 19:41:01 -04:00
tag_edsa.c dsa: Allow forwarding of redirected IGMP traffic 2020-06-24 14:39:43 -07:00
tag_gswip.c net: dsa: tag_gswip: fix typo in tagger name 2020-01-16 13:58:26 +01:00
tag_ksz.c net: dsa: tag_ksz: Fix __be16 warnings 2020-07-05 15:31:58 -07:00
tag_lan9303.c net: dsa: tag_lan9303: Fix __be16 warnings 2020-07-05 15:31:58 -07:00
tag_mtk.c net: dsa: tag_mtk: Fix warnings for __be16 2020-07-05 15:31:58 -07:00
tag_ocelot.c net: dsa: felix: create a template for the DSA tags on xmit 2020-07-13 17:40:01 -07:00
tag_qca.c net: dsa: tag_qca.c: Fix warning for __be16 vs u16 2020-07-05 15:31:58 -07:00
tag_rtl4_a.c net: dsa: tag_rtl4_a: Implement Realtek 4 byte A tag 2020-07-08 15:36:19 -07:00
tag_sja1105.c net: dsa: tag_sja1105: appease sparse checks for ethertype accessors 2020-05-12 18:02:42 -07:00
tag_trailer.c dsa: Cleanup unneeded table and make tag structures static 2019-04-28 19:41:01 -04:00