renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
Code
41db5f8397
linux-next/drivers/slimbus/stream.c
Jonathan Corbet 2f0f2441b4 slimbus: fix kerneldoc comments 
The kerneldoc comments in drivers/slimbus/stream.c were not properly
formatted, leading to a distinctly unsatisfying "no structured comments
found" warning in the docs build.  Sprinkle some asterisks around so that
the comments will be properly recognized.

Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-10 18:44:21 +02:00

478 lines
12 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
// Copyright (c) 2018, Linaro Limited
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/slimbus.h>
#include <uapi/sound/asound.h>
#include "slimbus.h"
/**
* struct segdist_code - Segment Distributions code from
* Table 20 of SLIMbus Specs Version 2.0
*
* @ratem: Channel Rate Multipler(Segments per Superframe)
* @seg_interval: Number of slots between the first Slot of Segment
* and the first slot of the next consecutive Segment.
* @segdist_code: Segment Distribution Code SD[11:0]
* @seg_offset_mask: Segment offset mask in SD[11:0]
* @segdist_codes: List of all possible Segmet Distribution codes.
*/
static const struct segdist_code {
int ratem;
int seg_interval;
int segdist_code;
u32 seg_offset_mask;
} segdist_codes[] = {
{1, 1536, 0x200, 0xdff},
{2, 768, 0x100, 0xcff},
{4, 384, 0x080, 0xc7f},
{8, 192, 0x040, 0xc3f},
{16, 96, 0x020, 0xc1f},
{32, 48, 0x010, 0xc0f},
{64, 24, 0x008, 0xc07},
{128, 12, 0x004, 0xc03},
{256, 6, 0x002, 0xc01},
{512, 3, 0x001, 0xc00},
{3, 512, 0xe00, 0x1ff},
{6, 256, 0xd00, 0x0ff},
{12, 128, 0xc80, 0x07f},
{24, 64, 0xc40, 0x03f},
{48, 32, 0xc20, 0x01f},
{96, 16, 0xc10, 0x00f},
{192, 8, 0xc08, 0x007},
{364, 4, 0xc04, 0x003},
{768, 2, 0xc02, 0x001},
};
/*
* Presence Rate table for all Natural Frequencies
* The Presence rate of a constant bitrate stream is mean flow rate of the
* stream expressed in occupied Segments of that Data Channel per second.
* Table 66 from SLIMbus 2.0 Specs
*
* Index of the table corresponds to Presence rate code for the respective rate
* in the table.
*/
static const int slim_presence_rate_table[] = {
0, /* Not Indicated */
12000,
24000,
48000,
96000,
192000,
384000,
768000,
0, /* Reserved */
110250,
220500,
441000,
882000,
176400,
352800,
705600,
4000,
8000,
16000,
32000,
64000,
128000,
256000,
512000,
};
/**
* slim_stream_allocate() - Allocate a new SLIMbus Stream
* @dev:Slim device to be associated with
* @name: name of the stream
*
* This is very first call for SLIMbus streaming, this API will allocate
* a new SLIMbus stream and return a valid stream runtime pointer for client
* to use it in subsequent stream apis. state of stream is set to ALLOCATED
*
* Return: valid pointer on success and error code on failure.
* From ASoC DPCM framework, this state is linked to startup() operation.
*/
struct slim_stream_runtime *slim_stream_allocate(struct slim_device *dev,
const char *name)
{
struct slim_stream_runtime *rt;
rt = kzalloc(sizeof(*rt), GFP_KERNEL);
if (!rt)
return ERR_PTR(-ENOMEM);
rt->name = kasprintf(GFP_KERNEL, "slim-%s", name);
if (!rt->name) {
kfree(rt);
return ERR_PTR(-ENOMEM);
}
rt->dev = dev;
spin_lock(&dev->stream_list_lock);
list_add_tail(&rt->node, &dev->stream_list);
spin_unlock(&dev->stream_list_lock);
return rt;
}
EXPORT_SYMBOL_GPL(slim_stream_allocate);
static int slim_connect_port_channel(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[2];
struct slim_val_inf msg = {0, 2, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_CONNECT_SOURCE;
DEFINE_SLIM_LDEST_TXN(txn, mc, 6, stream->dev->laddr, &msg);
if (port->direction == SLIM_PORT_SINK)
txn.mc = SLIM_MSG_MC_CONNECT_SINK;
wbuf[0] = port->id;
wbuf[1] = port->ch.id;
port->ch.state = SLIM_CH_STATE_ASSOCIATED;
port->state = SLIM_PORT_UNCONFIGURED;
return slim_do_transfer(sdev->ctrl, &txn);
}
static int slim_disconnect_port(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[1];
struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_DISCONNECT_PORT;
DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
wbuf[0] = port->id;
port->ch.state = SLIM_CH_STATE_DISCONNECTED;
port->state = SLIM_PORT_DISCONNECTED;
return slim_do_transfer(sdev->ctrl, &txn);
}
static int slim_deactivate_remove_channel(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[1];
struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_NEXT_DEACTIVATE_CHANNEL;
DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
int ret;
wbuf[0] = port->ch.id;
ret = slim_do_transfer(sdev->ctrl, &txn);
if (ret)
return ret;
txn.mc = SLIM_MSG_MC_NEXT_REMOVE_CHANNEL;
port->ch.state = SLIM_CH_STATE_REMOVED;
return slim_do_transfer(sdev->ctrl, &txn);
}
static int slim_get_prate_code(int rate)
{
int i;
for (i = 0; i < ARRAY_SIZE(slim_presence_rate_table); i++) {
if (rate == slim_presence_rate_table[i])
return i;
}
return -EINVAL;
}
/**
* slim_stream_prepare() - Prepare a SLIMbus Stream
*
* @rt: instance of slim stream runtime to configure
* @cfg: new configuration for the stream
*
* This API will configure SLIMbus stream with config parameters from cfg.
* return zero on success and error code on failure. From ASoC DPCM framework,
* this state is linked to hw_params() operation.
*/
int slim_stream_prepare(struct slim_stream_runtime *rt,
struct slim_stream_config *cfg)
{
struct slim_controller *ctrl = rt->dev->ctrl;
struct slim_port *port;
int num_ports, i, port_id;
if (rt->ports) {
dev_err(&rt->dev->dev, "Stream already Prepared\n");
return -EINVAL;
}
num_ports = hweight32(cfg->port_mask);
rt->ports = kcalloc(num_ports, sizeof(*port), GFP_KERNEL);
if (!rt->ports)
return -ENOMEM;
rt->num_ports = num_ports;
rt->rate = cfg->rate;
rt->bps = cfg->bps;
rt->direction = cfg->direction;
if (cfg->rate % ctrl->a_framer->superfreq) {
/*
* data rate not exactly multiple of super frame,
* use PUSH/PULL protocol
*/
if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
rt->prot = SLIM_PROTO_PUSH;
else
rt->prot = SLIM_PROTO_PULL;
} else {
rt->prot = SLIM_PROTO_ISO;
}
rt->ratem = cfg->rate/ctrl->a_framer->superfreq;
i = 0;
for_each_set_bit(port_id, &cfg->port_mask, SLIM_DEVICE_MAX_PORTS) {
port = &rt->ports[i];
port->state = SLIM_PORT_DISCONNECTED;
port->id = port_id;
port->ch.prrate = slim_get_prate_code(cfg->rate);
port->ch.id = cfg->chs[i];
port->ch.data_fmt = SLIM_CH_DATA_FMT_NOT_DEFINED;
port->ch.aux_fmt = SLIM_CH_AUX_FMT_NOT_APPLICABLE;
port->ch.state = SLIM_CH_STATE_ALLOCATED;
if (cfg->direction == SNDRV_PCM_STREAM_PLAYBACK)
port->direction = SLIM_PORT_SINK;
else
port->direction = SLIM_PORT_SOURCE;
slim_connect_port_channel(rt, port);
i++;
}
return 0;
}
EXPORT_SYMBOL_GPL(slim_stream_prepare);
static int slim_define_channel_content(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[4];
struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CONTENT;
DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
wbuf[0] = port->ch.id;
wbuf[1] = port->ch.prrate;
/* Frequency Locked for ISO Protocol */
if (stream->prot != SLIM_PROTO_ISO)
wbuf[1] |= SLIM_CHANNEL_CONTENT_FL;
wbuf[2] = port->ch.data_fmt | (port->ch.aux_fmt << 4);
wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
port->ch.state = SLIM_CH_STATE_CONTENT_DEFINED;
return slim_do_transfer(sdev->ctrl, &txn);
}
static int slim_get_segdist_code(int ratem)
{
int i;
for (i = 0; i < ARRAY_SIZE(segdist_codes); i++) {
if (segdist_codes[i].ratem == ratem)
return segdist_codes[i].segdist_code;
}
return -EINVAL;
}
static int slim_define_channel(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[4];
struct slim_val_inf msg = {0, 4, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_NEXT_DEFINE_CHANNEL;
DEFINE_SLIM_LDEST_TXN(txn, mc, 8, stream->dev->laddr, &msg);
port->ch.seg_dist = slim_get_segdist_code(stream->ratem);
wbuf[0] = port->ch.id;
wbuf[1] = port->ch.seg_dist & 0xFF;
wbuf[2] = (stream->prot << 4) | ((port->ch.seg_dist & 0xF00) >> 8);
if (stream->prot == SLIM_PROTO_ISO)
wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS;
else
wbuf[3] = stream->bps/SLIM_SLOT_LEN_BITS + 1;
port->ch.state = SLIM_CH_STATE_DEFINED;
return slim_do_transfer(sdev->ctrl, &txn);
}
static int slim_activate_channel(struct slim_stream_runtime *stream,
struct slim_port *port)
{
struct slim_device *sdev = stream->dev;
u8 wbuf[1];
struct slim_val_inf msg = {0, 1, NULL, wbuf, NULL};
u8 mc = SLIM_MSG_MC_NEXT_ACTIVATE_CHANNEL;
DEFINE_SLIM_LDEST_TXN(txn, mc, 5, stream->dev->laddr, &msg);
txn.msg->num_bytes = 1;
txn.msg->wbuf = wbuf;
wbuf[0] = port->ch.id;
port->ch.state = SLIM_CH_STATE_ACTIVE;
return slim_do_transfer(sdev->ctrl, &txn);
}
/**
* slim_stream_enable() - Enable a prepared SLIMbus Stream
*
* @stream: instance of slim stream runtime to enable
*
* This API will enable all the ports and channels associated with
* SLIMbus stream
*
* Return: zero on success and error code on failure. From ASoC DPCM framework,
* this state is linked to trigger() start operation.
*/
int slim_stream_enable(struct slim_stream_runtime *stream)
{
DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
3, SLIM_LA_MANAGER, NULL);
struct slim_controller *ctrl = stream->dev->ctrl;
int ret, i;
if (ctrl->enable_stream) {
ret = ctrl->enable_stream(stream);
if (ret)
return ret;
for (i = 0; i < stream->num_ports; i++)
stream->ports[i].ch.state = SLIM_CH_STATE_ACTIVE;
return ret;
}
ret = slim_do_transfer(ctrl, &txn);
if (ret)
return ret;
/* define channels first before activating them */
for (i = 0; i < stream->num_ports; i++) {
struct slim_port *port = &stream->ports[i];
slim_define_channel(stream, port);
slim_define_channel_content(stream, port);
}
for (i = 0; i < stream->num_ports; i++) {
struct slim_port *port = &stream->ports[i];
slim_activate_channel(stream, port);
port->state = SLIM_PORT_CONFIGURED;
}
txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
return slim_do_transfer(ctrl, &txn);
}
EXPORT_SYMBOL_GPL(slim_stream_enable);
/**
* slim_stream_disable() - Disable a SLIMbus Stream
*
* @stream: instance of slim stream runtime to disable
*
* This API will disable all the ports and channels associated with
* SLIMbus stream
*
* Return: zero on success and error code on failure. From ASoC DPCM framework,
* this state is linked to trigger() pause operation.
*/
int slim_stream_disable(struct slim_stream_runtime *stream)
{
DEFINE_SLIM_BCAST_TXN(txn, SLIM_MSG_MC_BEGIN_RECONFIGURATION,
3, SLIM_LA_MANAGER, NULL);
struct slim_controller *ctrl = stream->dev->ctrl;
int ret, i;
if (ctrl->disable_stream)
ctrl->disable_stream(stream);
ret = slim_do_transfer(ctrl, &txn);
if (ret)
return ret;
for (i = 0; i < stream->num_ports; i++)
slim_deactivate_remove_channel(stream, &stream->ports[i]);
txn.mc = SLIM_MSG_MC_RECONFIGURE_NOW;
return slim_do_transfer(ctrl, &txn);
}
EXPORT_SYMBOL_GPL(slim_stream_disable);
/**
* slim_stream_unprepare() - Un-prepare a SLIMbus Stream
*
* @stream: instance of slim stream runtime to unprepare
*
* This API will un allocate all the ports and channels associated with
* SLIMbus stream
*
* Return: zero on success and error code on failure. From ASoC DPCM framework,
* this state is linked to trigger() stop operation.
*/
int slim_stream_unprepare(struct slim_stream_runtime *stream)
{
int i;
for (i = 0; i < stream->num_ports; i++)
slim_disconnect_port(stream, &stream->ports[i]);
kfree(stream->ports);
stream->ports = NULL;
stream->num_ports = 0;
return 0;
}
EXPORT_SYMBOL_GPL(slim_stream_unprepare);
/**
* slim_stream_free() - Free a SLIMbus Stream
*
* @stream: instance of slim stream runtime to free
*
* This API will un allocate all the memory associated with
* slim stream runtime, user is not allowed to make an dereference
* to stream after this call.
*
* Return: zero on success and error code on failure. From ASoC DPCM framework,
* this state is linked to shutdown() operation.
*/
int slim_stream_free(struct slim_stream_runtime *stream)
{
struct slim_device *sdev = stream->dev;
spin_lock(&sdev->stream_list_lock);
list_del(&stream->node);
spin_unlock(&sdev->stream_list_lock);
kfree(stream->name);
kfree(stream);
return 0;
}
EXPORT_SYMBOL_GPL(slim_stream_free);
View Git Blame Copy Permalink