2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/drivers/ata/ahci_platform.c
Girish K S 1e8f5f761c ahci: sata: add support for exynos5440 sata
This patch adds the compatible string of the exynos5440 sata controller
compliant with the ahci 1.3 and sata 3.0 specification.

changes in v2:
		changed the compatible string by adding the actual IP
owners name instead of the SoC vendor name.

Signed-off-by: Girish K S <ks.giri@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2013-06-17 11:23:05 -07:00

352 lines
8.1 KiB
C

/*
* AHCI SATA platform driver
*
* Copyright 2004-2005 Red Hat, Inc.
* Jeff Garzik <jgarzik@pobox.com>
* Copyright 2010 MontaVista Software, LLC.
* Anton Vorontsov <avorontsov@ru.mvista.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*/
#include <linux/clk.h>
#include <linux/kernel.h>
#include <linux/gfp.h>
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/device.h>
#include <linux/platform_device.h>
#include <linux/libata.h>
#include <linux/ahci_platform.h>
#include "ahci.h"
static void ahci_host_stop(struct ata_host *host);
enum ahci_type {
AHCI, /* standard platform ahci */
IMX53_AHCI, /* ahci on i.mx53 */
STRICT_AHCI, /* delayed DMA engine start */
};
static struct platform_device_id ahci_devtype[] = {
{
.name = "ahci",
.driver_data = AHCI,
}, {
.name = "imx53-ahci",
.driver_data = IMX53_AHCI,
}, {
.name = "strict-ahci",
.driver_data = STRICT_AHCI,
}, {
/* sentinel */
}
};
MODULE_DEVICE_TABLE(platform, ahci_devtype);
static struct ata_port_operations ahci_platform_ops = {
.inherits = &ahci_ops,
.host_stop = ahci_host_stop,
};
static struct ata_port_operations ahci_platform_retry_srst_ops = {
.inherits = &ahci_pmp_retry_srst_ops,
.host_stop = ahci_host_stop,
};
static const struct ata_port_info ahci_port_info[] = {
/* by features */
[AHCI] = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
},
[IMX53_AHCI] = {
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_retry_srst_ops,
},
[STRICT_AHCI] = {
AHCI_HFLAGS (AHCI_HFLAG_DELAY_ENGINE),
.flags = AHCI_FLAG_COMMON,
.pio_mask = ATA_PIO4,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_platform_ops,
},
};
static struct scsi_host_template ahci_platform_sht = {
AHCI_SHT("ahci_platform"),
};
static int ahci_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
const struct platform_device_id *id = platform_get_device_id(pdev);
struct ata_port_info pi = ahci_port_info[id ? id->driver_data : 0];
const struct ata_port_info *ppi[] = { &pi, NULL };
struct ahci_host_priv *hpriv;
struct ata_host *host;
struct resource *mem;
int irq;
int n_ports;
int i;
int rc;
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!mem) {
dev_err(dev, "no mmio space\n");
return -EINVAL;
}
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(dev, "no irq\n");
return -EINVAL;
}
if (pdata && pdata->ata_port_info)
pi = *pdata->ata_port_info;
hpriv = devm_kzalloc(dev, sizeof(*hpriv), GFP_KERNEL);
if (!hpriv) {
dev_err(dev, "can't alloc ahci_host_priv\n");
return -ENOMEM;
}
hpriv->flags |= (unsigned long)pi.private_data;
hpriv->mmio = devm_ioremap(dev, mem->start, resource_size(mem));
if (!hpriv->mmio) {
dev_err(dev, "can't map %pR\n", mem);
return -ENOMEM;
}
hpriv->clk = clk_get(dev, NULL);
if (IS_ERR(hpriv->clk)) {
dev_err(dev, "can't get clock\n");
} else {
rc = clk_prepare_enable(hpriv->clk);
if (rc) {
dev_err(dev, "clock prepare enable failed");
goto free_clk;
}
}
/*
* Some platforms might need to prepare for mmio region access,
* which could be done in the following init call. So, the mmio
* region shouldn't be accessed before init (if provided) has
* returned successfully.
*/
if (pdata && pdata->init) {
rc = pdata->init(dev, hpriv->mmio);
if (rc)
goto disable_unprepare_clk;
}
ahci_save_initial_config(dev, hpriv,
pdata ? pdata->force_port_map : 0,
pdata ? pdata->mask_port_map : 0);
/* prepare host */
if (hpriv->cap & HOST_CAP_NCQ)
pi.flags |= ATA_FLAG_NCQ;
if (hpriv->cap & HOST_CAP_PMP)
pi.flags |= ATA_FLAG_PMP;
ahci_set_em_messages(hpriv, &pi);
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
* both CAP.NP and port_map.
*/
n_ports = max(ahci_nr_ports(hpriv->cap), fls(hpriv->port_map));
host = ata_host_alloc_pinfo(dev, ppi, n_ports);
if (!host) {
rc = -ENOMEM;
goto pdata_exit;
}
host->private_data = hpriv;
if (!(hpriv->cap & HOST_CAP_SSS) || ahci_ignore_sss)
host->flags |= ATA_HOST_PARALLEL_SCAN;
else
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
if (pi.flags & ATA_FLAG_EM)
ahci_reset_em(host);
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap = host->ports[i];
ata_port_desc(ap, "mmio %pR", mem);
ata_port_desc(ap, "port 0x%x", 0x100 + ap->port_no * 0x80);
/* set enclosure management message type */
if (ap->flags & ATA_FLAG_EM)
ap->em_message_type = hpriv->em_msg_type;
/* disabled/not-implemented port */
if (!(hpriv->port_map & (1 << i)))
ap->ops = &ata_dummy_port_ops;
}
rc = ahci_reset_controller(host);
if (rc)
goto pdata_exit;
ahci_init_controller(host);
ahci_print_info(host, "platform");
rc = ata_host_activate(host, irq, ahci_interrupt, IRQF_SHARED,
&ahci_platform_sht);
if (rc)
goto pdata_exit;
return 0;
pdata_exit:
if (pdata && pdata->exit)
pdata->exit(dev);
disable_unprepare_clk:
if (!IS_ERR(hpriv->clk))
clk_disable_unprepare(hpriv->clk);
free_clk:
if (!IS_ERR(hpriv->clk))
clk_put(hpriv->clk);
return rc;
}
static void ahci_host_stop(struct ata_host *host)
{
struct device *dev = host->dev;
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
if (pdata && pdata->exit)
pdata->exit(dev);
if (!IS_ERR(hpriv->clk)) {
clk_disable_unprepare(hpriv->clk);
clk_put(hpriv->clk);
}
}
#ifdef CONFIG_PM_SLEEP
static int ahci_suspend(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = hpriv->mmio;
u32 ctl;
int rc;
if (hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
dev_err(dev, "firmware update required for suspend/resume\n");
return -EIO;
}
/*
* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
* transition of the HBA to D3 state.
*/
ctl = readl(mmio + HOST_CTL);
ctl &= ~HOST_IRQ_EN;
writel(ctl, mmio + HOST_CTL);
readl(mmio + HOST_CTL); /* flush */
rc = ata_host_suspend(host, PMSG_SUSPEND);
if (rc)
return rc;
if (pdata && pdata->suspend)
return pdata->suspend(dev);
if (!IS_ERR(hpriv->clk))
clk_disable_unprepare(hpriv->clk);
return 0;
}
static int ahci_resume(struct device *dev)
{
struct ahci_platform_data *pdata = dev_get_platdata(dev);
struct ata_host *host = dev_get_drvdata(dev);
struct ahci_host_priv *hpriv = host->private_data;
int rc;
if (!IS_ERR(hpriv->clk)) {
rc = clk_prepare_enable(hpriv->clk);
if (rc) {
dev_err(dev, "clock prepare enable failed");
return rc;
}
}
if (pdata && pdata->resume) {
rc = pdata->resume(dev);
if (rc)
goto disable_unprepare_clk;
}
if (dev->power.power_state.event == PM_EVENT_SUSPEND) {
rc = ahci_reset_controller(host);
if (rc)
goto disable_unprepare_clk;
ahci_init_controller(host);
}
ata_host_resume(host);
return 0;
disable_unprepare_clk:
if (!IS_ERR(hpriv->clk))
clk_disable_unprepare(hpriv->clk);
return rc;
}
#endif
static SIMPLE_DEV_PM_OPS(ahci_pm_ops, ahci_suspend, ahci_resume);
static const struct of_device_id ahci_of_match[] = {
{ .compatible = "snps,spear-ahci", },
{ .compatible = "snps,exynos5440-ahci", },
{},
};
MODULE_DEVICE_TABLE(of, ahci_of_match);
static struct platform_driver ahci_driver = {
.probe = ahci_probe,
.remove = ata_platform_remove_one,
.driver = {
.name = "ahci",
.owner = THIS_MODULE,
.of_match_table = ahci_of_match,
.pm = &ahci_pm_ops,
},
.id_table = ahci_devtype,
};
module_platform_driver(ahci_driver);
MODULE_DESCRIPTION("AHCI SATA platform driver");
MODULE_AUTHOR("Anton Vorontsov <avorontsov@ru.mvista.com>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ahci");