2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 14:43:58 +08:00
linux-next/drivers/leds/leds-ns2.c
Paul Gortmaker 7c7d2a26db drivers/leds: delete non-required instances of include <linux/init.h>
None of these files are actually using any __init type directives
and hence don't need to include <linux/init.h>.  Most are just a
left over from __devinit and __cpuinit removal, or simply due to
code getting copied from one driver to the next.

Cc: Bryan Wu <cooloney@gmail.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Cc: linux-leds@vger.kernel.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Bryan Wu <cooloney@gmail.com>
2014-02-27 09:56:56 -08:00

396 lines
9.3 KiB
C

/*
* leds-ns2.c - Driver for the Network Space v2 (and parents) dual-GPIO LED
*
* Copyright (C) 2010 LaCie
*
* Author: Simon Guinot <sguinot@lacie.com>
*
* Based on leds-gpio.c by Raphael Assenat <raph@8d.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/module.h>
#include <linux/platform_data/leds-kirkwood-ns2.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
/*
* The Network Space v2 dual-GPIO LED is wired to a CPLD and can blink in
* relation with the SATA activity. This capability is exposed through the
* "sata" sysfs attribute.
*
* The following array detail the different LED registers and the combination
* of their possible values:
*
* cmd_led | slow_led | /SATA active | LED state
* | | |
* 1 | 0 | x | off
* - | 1 | x | on
* 0 | 0 | 1 | on
* 0 | 0 | 0 | blink (rate 300ms)
*/
enum ns2_led_modes {
NS_V2_LED_OFF,
NS_V2_LED_ON,
NS_V2_LED_SATA,
};
struct ns2_led_mode_value {
enum ns2_led_modes mode;
int cmd_level;
int slow_level;
};
static struct ns2_led_mode_value ns2_led_modval[] = {
{ NS_V2_LED_OFF , 1, 0 },
{ NS_V2_LED_ON , 0, 1 },
{ NS_V2_LED_ON , 1, 1 },
{ NS_V2_LED_SATA, 0, 0 },
};
struct ns2_led_data {
struct led_classdev cdev;
unsigned cmd;
unsigned slow;
unsigned char sata; /* True when SATA mode active. */
rwlock_t rw_lock; /* Lock GPIOs. */
};
static int ns2_led_get_mode(struct ns2_led_data *led_dat,
enum ns2_led_modes *mode)
{
int i;
int ret = -EINVAL;
int cmd_level;
int slow_level;
read_lock_irq(&led_dat->rw_lock);
cmd_level = gpio_get_value(led_dat->cmd);
slow_level = gpio_get_value(led_dat->slow);
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
if (cmd_level == ns2_led_modval[i].cmd_level &&
slow_level == ns2_led_modval[i].slow_level) {
*mode = ns2_led_modval[i].mode;
ret = 0;
break;
}
}
read_unlock_irq(&led_dat->rw_lock);
return ret;
}
static void ns2_led_set_mode(struct ns2_led_data *led_dat,
enum ns2_led_modes mode)
{
int i;
unsigned long flags;
write_lock_irqsave(&led_dat->rw_lock, flags);
for (i = 0; i < ARRAY_SIZE(ns2_led_modval); i++) {
if (mode == ns2_led_modval[i].mode) {
gpio_set_value(led_dat->cmd,
ns2_led_modval[i].cmd_level);
gpio_set_value(led_dat->slow,
ns2_led_modval[i].slow_level);
}
}
write_unlock_irqrestore(&led_dat->rw_lock, flags);
}
static void ns2_led_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct ns2_led_data *led_dat =
container_of(led_cdev, struct ns2_led_data, cdev);
enum ns2_led_modes mode;
if (value == LED_OFF)
mode = NS_V2_LED_OFF;
else if (led_dat->sata)
mode = NS_V2_LED_SATA;
else
mode = NS_V2_LED_ON;
ns2_led_set_mode(led_dat, mode);
}
static ssize_t ns2_led_sata_store(struct device *dev,
struct device_attribute *attr,
const char *buff, size_t count)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct ns2_led_data *led_dat =
container_of(led_cdev, struct ns2_led_data, cdev);
int ret;
unsigned long enable;
enum ns2_led_modes mode;
ret = kstrtoul(buff, 10, &enable);
if (ret < 0)
return ret;
enable = !!enable;
if (led_dat->sata == enable)
return count;
ret = ns2_led_get_mode(led_dat, &mode);
if (ret < 0)
return ret;
if (enable && mode == NS_V2_LED_ON)
ns2_led_set_mode(led_dat, NS_V2_LED_SATA);
if (!enable && mode == NS_V2_LED_SATA)
ns2_led_set_mode(led_dat, NS_V2_LED_ON);
led_dat->sata = enable;
return count;
}
static ssize_t ns2_led_sata_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct ns2_led_data *led_dat =
container_of(led_cdev, struct ns2_led_data, cdev);
return sprintf(buf, "%d\n", led_dat->sata);
}
static DEVICE_ATTR(sata, 0644, ns2_led_sata_show, ns2_led_sata_store);
static int
create_ns2_led(struct platform_device *pdev, struct ns2_led_data *led_dat,
const struct ns2_led *template)
{
int ret;
enum ns2_led_modes mode;
ret = devm_gpio_request_one(&pdev->dev, template->cmd,
gpio_get_value(template->cmd) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
dev_err(&pdev->dev, "%s: failed to setup command GPIO\n",
template->name);
return ret;
}
ret = devm_gpio_request_one(&pdev->dev, template->slow,
gpio_get_value(template->slow) ?
GPIOF_OUT_INIT_HIGH : GPIOF_OUT_INIT_LOW,
template->name);
if (ret) {
dev_err(&pdev->dev, "%s: failed to setup slow GPIO\n",
template->name);
return ret;
}
rwlock_init(&led_dat->rw_lock);
led_dat->cdev.name = template->name;
led_dat->cdev.default_trigger = template->default_trigger;
led_dat->cdev.blink_set = NULL;
led_dat->cdev.brightness_set = ns2_led_set;
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
led_dat->cmd = template->cmd;
led_dat->slow = template->slow;
ret = ns2_led_get_mode(led_dat, &mode);
if (ret < 0)
return ret;
/* Set LED initial state. */
led_dat->sata = (mode == NS_V2_LED_SATA) ? 1 : 0;
led_dat->cdev.brightness =
(mode == NS_V2_LED_OFF) ? LED_OFF : LED_FULL;
ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
if (ret < 0)
return ret;
ret = device_create_file(led_dat->cdev.dev, &dev_attr_sata);
if (ret < 0)
goto err_free_cdev;
return 0;
err_free_cdev:
led_classdev_unregister(&led_dat->cdev);
return ret;
}
static void delete_ns2_led(struct ns2_led_data *led_dat)
{
device_remove_file(led_dat->cdev.dev, &dev_attr_sata);
led_classdev_unregister(&led_dat->cdev);
}
#ifdef CONFIG_OF_GPIO
/*
* Translate OpenFirmware node properties into platform_data.
*/
static int
ns2_leds_get_of_pdata(struct device *dev, struct ns2_led_platform_data *pdata)
{
struct device_node *np = dev->of_node;
struct device_node *child;
struct ns2_led *leds;
int num_leds = 0;
int i = 0;
num_leds = of_get_child_count(np);
if (!num_leds)
return -ENODEV;
leds = devm_kzalloc(dev, num_leds * sizeof(struct ns2_led),
GFP_KERNEL);
if (!leds)
return -ENOMEM;
for_each_child_of_node(np, child) {
const char *string;
int ret;
ret = of_get_named_gpio(child, "cmd-gpio", 0);
if (ret < 0)
return ret;
leds[i].cmd = ret;
ret = of_get_named_gpio(child, "slow-gpio", 0);
if (ret < 0)
return ret;
leds[i].slow = ret;
ret = of_property_read_string(child, "label", &string);
leds[i].name = (ret == 0) ? string : child->name;
ret = of_property_read_string(child, "linux,default-trigger",
&string);
if (ret == 0)
leds[i].default_trigger = string;
i++;
}
pdata->leds = leds;
pdata->num_leds = num_leds;
return 0;
}
static const struct of_device_id of_ns2_leds_match[] = {
{ .compatible = "lacie,ns2-leds", },
{},
};
#endif /* CONFIG_OF_GPIO */
struct ns2_led_priv {
int num_leds;
struct ns2_led_data leds_data[];
};
static inline int sizeof_ns2_led_priv(int num_leds)
{
return sizeof(struct ns2_led_priv) +
(sizeof(struct ns2_led_data) * num_leds);
}
static int ns2_led_probe(struct platform_device *pdev)
{
struct ns2_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct ns2_led_priv *priv;
int i;
int ret;
#ifdef CONFIG_OF_GPIO
if (!pdata) {
pdata = devm_kzalloc(&pdev->dev,
sizeof(struct ns2_led_platform_data),
GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = ns2_leds_get_of_pdata(&pdev->dev, pdata);
if (ret)
return ret;
}
#else
if (!pdata)
return -EINVAL;
#endif /* CONFIG_OF_GPIO */
priv = devm_kzalloc(&pdev->dev,
sizeof_ns2_led_priv(pdata->num_leds), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->num_leds = pdata->num_leds;
for (i = 0; i < priv->num_leds; i++) {
ret = create_ns2_led(pdev, &priv->leds_data[i],
&pdata->leds[i]);
if (ret < 0) {
for (i = i - 1; i >= 0; i--)
delete_ns2_led(&priv->leds_data[i]);
return ret;
}
}
platform_set_drvdata(pdev, priv);
return 0;
}
static int ns2_led_remove(struct platform_device *pdev)
{
int i;
struct ns2_led_priv *priv;
priv = platform_get_drvdata(pdev);
for (i = 0; i < priv->num_leds; i++)
delete_ns2_led(&priv->leds_data[i]);
return 0;
}
static struct platform_driver ns2_led_driver = {
.probe = ns2_led_probe,
.remove = ns2_led_remove,
.driver = {
.name = "leds-ns2",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(of_ns2_leds_match),
},
};
module_platform_driver(ns2_led_driver);
MODULE_AUTHOR("Simon Guinot <sguinot@lacie.com>");
MODULE_DESCRIPTION("Network Space v2 LED driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:leds-ns2");