renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 19:23:57 +08:00
Code
40df0a91b2
linux-next/drivers/iio/light/adux1020.c
Alexandru Ardelean d3be83244c iio: remove explicit IIO device parent assignment 
This patch applies the semantic patch:
@@
expression I, P, SP;
@@
   I = devm_iio_device_alloc(P, SP);
   ...
-  I->dev.parent = P;

It updates 302 files and does 307 deletions.
This semantic patch also removes some comments like
'/* Establish that the iio_dev is a child of the i2c device */'

But this is is only done in case where the block is left empty.

The patch does not seem to cover all cases. It looks like in some cases a
different variable is used in some cases to assign the parent, but it
points to the same reference.
In other cases, the block covered by ... may be just too big to be covered
by the semantic patch.

However, this looks pretty good as well, as it does cover a big bulk of the
drivers that should remove the parent assignment.

Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2020-06-14 11:49:59 +01:00

849 lines
19 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0+
/*
* adux1020.c - Support for Analog Devices ADUX1020 photometric sensor
*
* Copyright (C) 2019 Linaro Ltd.
* Author: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
*
* TODO: Triggered buffer support
*/
#include <linux/bitfield.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/regmap.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#include <linux/iio/events.h>
#define ADUX1020_REGMAP_NAME "adux1020_regmap"
#define ADUX1020_DRV_NAME "adux1020"
/* System registers */
#define ADUX1020_REG_CHIP_ID 0x08
#define ADUX1020_REG_SLAVE_ADDRESS 0x09
#define ADUX1020_REG_SW_RESET 0x0f
#define ADUX1020_REG_INT_ENABLE 0x1c
#define ADUX1020_REG_INT_POLARITY 0x1d
#define ADUX1020_REG_PROX_TH_ON1 0x2a
#define ADUX1020_REG_PROX_TH_OFF1 0x2b
#define ADUX1020_REG_PROX_TYPE 0x2f
#define ADUX1020_REG_TEST_MODES_3 0x32
#define ADUX1020_REG_FORCE_MODE 0x33
#define ADUX1020_REG_FREQUENCY 0x40
#define ADUX1020_REG_LED_CURRENT 0x41
#define ADUX1020_REG_OP_MODE 0x45
#define ADUX1020_REG_INT_MASK 0x48
#define ADUX1020_REG_INT_STATUS 0x49
#define ADUX1020_REG_DATA_BUFFER 0x60
/* Chip ID bits */
#define ADUX1020_CHIP_ID_MASK GENMASK(11, 0)
#define ADUX1020_CHIP_ID 0x03fc
#define ADUX1020_SW_RESET BIT(1)
#define ADUX1020_FIFO_FLUSH BIT(15)
#define ADUX1020_OP_MODE_MASK GENMASK(3, 0)
#define ADUX1020_DATA_OUT_MODE_MASK GENMASK(7, 4)
#define ADUX1020_DATA_OUT_PROX_I FIELD_PREP(ADUX1020_DATA_OUT_MODE_MASK, 1)
#define ADUX1020_MODE_INT_MASK GENMASK(7, 0)
#define ADUX1020_INT_ENABLE 0x2094
#define ADUX1020_INT_DISABLE 0x2090
#define ADUX1020_PROX_INT_ENABLE 0x00f0
#define ADUX1020_PROX_ON1_INT BIT(0)
#define ADUX1020_PROX_OFF1_INT BIT(1)
#define ADUX1020_FIFO_INT_ENABLE 0x7f
#define ADUX1020_MODE_INT_DISABLE 0xff
#define ADUX1020_MODE_INT_STATUS_MASK GENMASK(7, 0)
#define ADUX1020_FIFO_STATUS_MASK GENMASK(15, 8)
#define ADUX1020_INT_CLEAR 0xff
#define ADUX1020_PROX_TYPE BIT(15)
#define ADUX1020_INT_PROX_ON1 BIT(0)
#define ADUX1020_INT_PROX_OFF1 BIT(1)
#define ADUX1020_FORCE_CLOCK_ON 0x0f4f
#define ADUX1020_FORCE_CLOCK_RESET 0x0040
#define ADUX1020_ACTIVE_4_STATE 0x0008
#define ADUX1020_PROX_FREQ_MASK GENMASK(7, 4)
#define ADUX1020_PROX_FREQ(x) FIELD_PREP(ADUX1020_PROX_FREQ_MASK, x)
#define ADUX1020_LED_CURRENT_MASK GENMASK(3, 0)
#define ADUX1020_LED_PIREF_EN BIT(12)
/* Operating modes */
enum adux1020_op_modes {
ADUX1020_MODE_STANDBY,
ADUX1020_MODE_PROX_I,
ADUX1020_MODE_PROX_XY,
ADUX1020_MODE_GEST,
ADUX1020_MODE_SAMPLE,
ADUX1020_MODE_FORCE = 0x0e,
ADUX1020_MODE_IDLE = 0x0f,
};
struct adux1020_data {
struct i2c_client *client;
struct iio_dev *indio_dev;
struct mutex lock;
struct regmap *regmap;
};
struct adux1020_mode_data {
u8 bytes;
u8 buf_len;
u16 int_en;
};
static const struct adux1020_mode_data adux1020_modes[] = {
[ADUX1020_MODE_PROX_I] = {
.bytes = 2,
.buf_len = 1,
.int_en = ADUX1020_PROX_INT_ENABLE,
},
};
static const struct regmap_config adux1020_regmap_config = {
.name = ADUX1020_REGMAP_NAME,
.reg_bits = 8,
.val_bits = 16,
.max_register = 0x6F,
.cache_type = REGCACHE_NONE,
};
static const struct reg_sequence adux1020_def_conf[] = {
{ 0x000c, 0x000f },
{ 0x0010, 0x1010 },
{ 0x0011, 0x004c },
{ 0x0012, 0x5f0c },
{ 0x0013, 0xada5 },
{ 0x0014, 0x0080 },
{ 0x0015, 0x0000 },
{ 0x0016, 0x0600 },
{ 0x0017, 0x0000 },
{ 0x0018, 0x2693 },
{ 0x0019, 0x0004 },
{ 0x001a, 0x4280 },
{ 0x001b, 0x0060 },
{ 0x001c, 0x2094 },
{ 0x001d, 0x0020 },
{ 0x001e, 0x0001 },
{ 0x001f, 0x0100 },
{ 0x0020, 0x0320 },
{ 0x0021, 0x0A13 },
{ 0x0022, 0x0320 },
{ 0x0023, 0x0113 },
{ 0x0024, 0x0000 },
{ 0x0025, 0x2412 },
{ 0x0026, 0x2412 },
{ 0x0027, 0x0022 },
{ 0x0028, 0x0000 },
{ 0x0029, 0x0300 },
{ 0x002a, 0x0700 },
{ 0x002b, 0x0600 },
{ 0x002c, 0x6000 },
{ 0x002d, 0x4000 },
{ 0x002e, 0x0000 },
{ 0x002f, 0x0000 },
{ 0x0030, 0x0000 },
{ 0x0031, 0x0000 },
{ 0x0032, 0x0040 },
{ 0x0033, 0x0008 },
{ 0x0034, 0xE400 },
{ 0x0038, 0x8080 },
{ 0x0039, 0x8080 },
{ 0x003a, 0x2000 },
{ 0x003b, 0x1f00 },
{ 0x003c, 0x2000 },
{ 0x003d, 0x2000 },
{ 0x003e, 0x0000 },
{ 0x0040, 0x8069 },
{ 0x0041, 0x1f2f },
{ 0x0042, 0x4000 },
{ 0x0043, 0x0000 },
{ 0x0044, 0x0008 },
{ 0x0046, 0x0000 },
{ 0x0048, 0x00ef },
{ 0x0049, 0x0000 },
{ 0x0045, 0x0000 },
};
static const int adux1020_rates[][2] = {
{ 0, 100000 },
{ 0, 200000 },
{ 0, 500000 },
{ 1, 0 },
{ 2, 0 },
{ 5, 0 },
{ 10, 0 },
{ 20, 0 },
{ 50, 0 },
{ 100, 0 },
{ 190, 0 },
{ 450, 0 },
{ 820, 0 },
{ 1400, 0 },
};
static const int adux1020_led_currents[][2] = {
{ 0, 25000 },
{ 0, 40000 },
{ 0, 55000 },
{ 0, 70000 },
{ 0, 85000 },
{ 0, 100000 },
{ 0, 115000 },
{ 0, 130000 },
{ 0, 145000 },
{ 0, 160000 },
{ 0, 175000 },
{ 0, 190000 },
{ 0, 205000 },
{ 0, 220000 },
{ 0, 235000 },
{ 0, 250000 },
};
static int adux1020_flush_fifo(struct adux1020_data *data)
{
int ret;
/* Force Idle mode */
ret = regmap_write(data->regmap, ADUX1020_REG_FORCE_MODE,
ADUX1020_ACTIVE_4_STATE);
if (ret < 0)
return ret;
ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
ADUX1020_OP_MODE_MASK, ADUX1020_MODE_FORCE);
if (ret < 0)
return ret;
ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
ADUX1020_OP_MODE_MASK, ADUX1020_MODE_IDLE);
if (ret < 0)
return ret;
/* Flush FIFO */
ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
ADUX1020_FORCE_CLOCK_ON);
if (ret < 0)
return ret;
ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS,
ADUX1020_FIFO_FLUSH);
if (ret < 0)
return ret;
return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
ADUX1020_FORCE_CLOCK_RESET);
}
static int adux1020_read_fifo(struct adux1020_data *data, u16 *buf, u8 buf_len)
{
unsigned int regval;
int i, ret;
/* Enable 32MHz clock */
ret = regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
ADUX1020_FORCE_CLOCK_ON);
if (ret < 0)
return ret;
for (i = 0; i < buf_len; i++) {
ret = regmap_read(data->regmap, ADUX1020_REG_DATA_BUFFER,
&regval);
if (ret < 0)
return ret;
buf[i] = regval;
}
/* Set 32MHz clock to be controlled by internal state machine */
return regmap_write(data->regmap, ADUX1020_REG_TEST_MODES_3,
ADUX1020_FORCE_CLOCK_RESET);
}
static int adux1020_set_mode(struct adux1020_data *data,
enum adux1020_op_modes mode)
{
int ret;
/* Switch to standby mode before changing the mode */
ret = regmap_write(data->regmap, ADUX1020_REG_OP_MODE,
ADUX1020_MODE_STANDBY);
if (ret < 0)
return ret;
/* Set data out and switch to the desired mode */
switch (mode) {
case ADUX1020_MODE_PROX_I:
ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
ADUX1020_DATA_OUT_MODE_MASK,
ADUX1020_DATA_OUT_PROX_I);
if (ret < 0)
return ret;
ret = regmap_update_bits(data->regmap, ADUX1020_REG_OP_MODE,
ADUX1020_OP_MODE_MASK,
ADUX1020_MODE_PROX_I);
if (ret < 0)
return ret;
break;
default:
return -EINVAL;
}
return 0;
}
static int adux1020_measure(struct adux1020_data *data,
enum adux1020_op_modes mode,
u16 *val)
{
unsigned int status;
int ret, tries = 50;
/* Disable INT pin as polling is going to be used */
ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE,
ADUX1020_INT_DISABLE);
if (ret < 0)
return ret;
/* Enable mode interrupt */
ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
ADUX1020_MODE_INT_MASK,
adux1020_modes[mode].int_en);
if (ret < 0)
return ret;
while (tries--) {
ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS,
&status);
if (ret < 0)
return ret;
status &= ADUX1020_FIFO_STATUS_MASK;
if (status >= adux1020_modes[mode].bytes)
break;
msleep(20);
}
if (tries < 0)
return -EIO;
ret = adux1020_read_fifo(data, val, adux1020_modes[mode].buf_len);
if (ret < 0)
return ret;
/* Clear mode interrupt */
ret = regmap_write(data->regmap, ADUX1020_REG_INT_STATUS,
(~adux1020_modes[mode].int_en));
if (ret < 0)
return ret;
/* Disable mode interrupts */
return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
ADUX1020_MODE_INT_MASK,
ADUX1020_MODE_INT_DISABLE);
}
static int adux1020_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct adux1020_data *data = iio_priv(indio_dev);
u16 buf[3];
int ret = -EINVAL;
unsigned int regval;
mutex_lock(&data->lock);
switch (mask) {
case IIO_CHAN_INFO_RAW:
switch (chan->type) {
case IIO_PROXIMITY:
ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I);
if (ret < 0)
goto fail;
ret = adux1020_measure(data, ADUX1020_MODE_PROX_I, buf);
if (ret < 0)
goto fail;
*val = buf[0];
ret = IIO_VAL_INT;
break;
default:
break;
}
break;
case IIO_CHAN_INFO_PROCESSED:
switch (chan->type) {
case IIO_CURRENT:
ret = regmap_read(data->regmap,
ADUX1020_REG_LED_CURRENT, &regval);
if (ret < 0)
goto fail;
regval = regval & ADUX1020_LED_CURRENT_MASK;
*val = adux1020_led_currents[regval][0];
*val2 = adux1020_led_currents[regval][1];
ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
break;
}
break;
case IIO_CHAN_INFO_SAMP_FREQ:
switch (chan->type) {
case IIO_PROXIMITY:
ret = regmap_read(data->regmap, ADUX1020_REG_FREQUENCY,
&regval);
if (ret < 0)
goto fail;
regval = FIELD_GET(ADUX1020_PROX_FREQ_MASK, regval);
*val = adux1020_rates[regval][0];
*val2 = adux1020_rates[regval][1];
ret = IIO_VAL_INT_PLUS_MICRO;
break;
default:
break;
}
break;
default:
break;
}
fail:
mutex_unlock(&data->lock);
return ret;
};
static inline int adux1020_find_index(const int array[][2], int count, int val,
int val2)
{
int i;
for (i = 0; i < count; i++)
if (val == array[i][0] && val2 == array[i][1])
return i;
return -EINVAL;
}
static int adux1020_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct adux1020_data *data = iio_priv(indio_dev);
int i, ret = -EINVAL;
mutex_lock(&data->lock);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
if (chan->type == IIO_PROXIMITY) {
i = adux1020_find_index(adux1020_rates,
ARRAY_SIZE(adux1020_rates),
val, val2);
if (i < 0) {
ret = i;
goto fail;
}
ret = regmap_update_bits(data->regmap,
ADUX1020_REG_FREQUENCY,
ADUX1020_PROX_FREQ_MASK,
ADUX1020_PROX_FREQ(i));
}
break;
case IIO_CHAN_INFO_PROCESSED:
if (chan->type == IIO_CURRENT) {
i = adux1020_find_index(adux1020_led_currents,
ARRAY_SIZE(adux1020_led_currents),
val, val2);
if (i < 0) {
ret = i;
goto fail;
}
ret = regmap_update_bits(data->regmap,
ADUX1020_REG_LED_CURRENT,
ADUX1020_LED_CURRENT_MASK, i);
}
break;
default:
break;
}
fail:
mutex_unlock(&data->lock);
return ret;
}
static int adux1020_write_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir, int state)
{
struct adux1020_data *data = iio_priv(indio_dev);
int ret, mask;
mutex_lock(&data->lock);
ret = regmap_write(data->regmap, ADUX1020_REG_INT_ENABLE,
ADUX1020_INT_ENABLE);
if (ret < 0)
goto fail;
ret = regmap_write(data->regmap, ADUX1020_REG_INT_POLARITY, 0);
if (ret < 0)
goto fail;
switch (chan->type) {
case IIO_PROXIMITY:
if (dir == IIO_EV_DIR_RISING)
mask = ADUX1020_PROX_ON1_INT;
else
mask = ADUX1020_PROX_OFF1_INT;
if (state)
state = 0;
else
state = mask;
ret = regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
mask, state);
if (ret < 0)
goto fail;
/*
* Trigger proximity interrupt when the intensity is above
* or below threshold
*/
ret = regmap_update_bits(data->regmap, ADUX1020_REG_PROX_TYPE,
ADUX1020_PROX_TYPE,
ADUX1020_PROX_TYPE);
if (ret < 0)
goto fail;
/* Set proximity mode */
ret = adux1020_set_mode(data, ADUX1020_MODE_PROX_I);
break;
default:
ret = -EINVAL;
break;
}
fail:
mutex_unlock(&data->lock);
return ret;
}
static int adux1020_read_event_config(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir)
{
struct adux1020_data *data = iio_priv(indio_dev);
int ret, mask;
unsigned int regval;
switch (chan->type) {
case IIO_PROXIMITY:
if (dir == IIO_EV_DIR_RISING)
mask = ADUX1020_PROX_ON1_INT;
else
mask = ADUX1020_PROX_OFF1_INT;
break;
default:
return -EINVAL;
}
ret = regmap_read(data->regmap, ADUX1020_REG_INT_MASK, &regval);
if (ret < 0)
return ret;
return !(regval & mask);
}
static int adux1020_read_thresh(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int *val, int *val2)
{
struct adux1020_data *data = iio_priv(indio_dev);
u8 reg;
int ret;
unsigned int regval;
switch (chan->type) {
case IIO_PROXIMITY:
if (dir == IIO_EV_DIR_RISING)
reg = ADUX1020_REG_PROX_TH_ON1;
else
reg = ADUX1020_REG_PROX_TH_OFF1;
break;
default:
return -EINVAL;
}
ret = regmap_read(data->regmap, reg, &regval);
if (ret < 0)
return ret;
*val = regval;
return IIO_VAL_INT;
}
static int adux1020_write_thresh(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
enum iio_event_type type,
enum iio_event_direction dir,
enum iio_event_info info, int val, int val2)
{
struct adux1020_data *data = iio_priv(indio_dev);
u8 reg;
switch (chan->type) {
case IIO_PROXIMITY:
if (dir == IIO_EV_DIR_RISING)
reg = ADUX1020_REG_PROX_TH_ON1;
else
reg = ADUX1020_REG_PROX_TH_OFF1;
break;
default:
return -EINVAL;
}
/* Full scale threshold value is 0-65535 */
if (val < 0 || val > 65535)
return -EINVAL;
return regmap_write(data->regmap, reg, val);
}
static const struct iio_event_spec adux1020_proximity_event[] = {
{
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_RISING,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE),
},
{
.type = IIO_EV_TYPE_THRESH,
.dir = IIO_EV_DIR_FALLING,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE),
},
};
static const struct iio_chan_spec adux1020_channels[] = {
{
.type = IIO_PROXIMITY,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
BIT(IIO_CHAN_INFO_SAMP_FREQ),
.event_spec = adux1020_proximity_event,
.num_event_specs = ARRAY_SIZE(adux1020_proximity_event),
},
{
.type = IIO_CURRENT,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
.extend_name = "led",
.output = 1,
},
};
static IIO_CONST_ATTR_SAMP_FREQ_AVAIL(
"0.1 0.2 0.5 1 2 5 10 20 50 100 190 450 820 1400");
static struct attribute *adux1020_attributes[] = {
&iio_const_attr_sampling_frequency_available.dev_attr.attr,
NULL
};
static const struct attribute_group adux1020_attribute_group = {
.attrs = adux1020_attributes,
};
static const struct iio_info adux1020_info = {
.attrs = &adux1020_attribute_group,
.read_raw = adux1020_read_raw,
.write_raw = adux1020_write_raw,
.read_event_config = adux1020_read_event_config,
.write_event_config = adux1020_write_event_config,
.read_event_value = adux1020_read_thresh,
.write_event_value = adux1020_write_thresh,
};
static irqreturn_t adux1020_interrupt_handler(int irq, void *private)
{
struct iio_dev *indio_dev = private;
struct adux1020_data *data = iio_priv(indio_dev);
int ret, status;
ret = regmap_read(data->regmap, ADUX1020_REG_INT_STATUS, &status);
if (ret < 0)
return IRQ_HANDLED;
status &= ADUX1020_MODE_INT_STATUS_MASK;
if (status & ADUX1020_INT_PROX_ON1) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_RISING),
iio_get_time_ns(indio_dev));
}
if (status & ADUX1020_INT_PROX_OFF1) {
iio_push_event(indio_dev,
IIO_UNMOD_EVENT_CODE(IIO_PROXIMITY, 0,
IIO_EV_TYPE_THRESH,
IIO_EV_DIR_FALLING),
iio_get_time_ns(indio_dev));
}
regmap_update_bits(data->regmap, ADUX1020_REG_INT_STATUS,
ADUX1020_MODE_INT_MASK, ADUX1020_INT_CLEAR);
return IRQ_HANDLED;
}
static int adux1020_chip_init(struct adux1020_data *data)
{
struct i2c_client *client = data->client;
int ret;
unsigned int val;
ret = regmap_read(data->regmap, ADUX1020_REG_CHIP_ID, &val);
if (ret < 0)
return ret;
if ((val & ADUX1020_CHIP_ID_MASK) != ADUX1020_CHIP_ID) {
dev_err(&client->dev, "invalid chip id 0x%04x\n", val);
return -ENODEV;
}
dev_dbg(&client->dev, "Detected ADUX1020 with chip id: 0x%04x\n", val);
ret = regmap_update_bits(data->regmap, ADUX1020_REG_SW_RESET,
ADUX1020_SW_RESET, ADUX1020_SW_RESET);
if (ret < 0)
return ret;
/* Load default configuration */
ret = regmap_multi_reg_write(data->regmap, adux1020_def_conf,
ARRAY_SIZE(adux1020_def_conf));
if (ret < 0)
return ret;
ret = adux1020_flush_fifo(data);
if (ret < 0)
return ret;
/* Use LED_IREF for proximity mode */
ret = regmap_update_bits(data->regmap, ADUX1020_REG_LED_CURRENT,
ADUX1020_LED_PIREF_EN, 0);
if (ret < 0)
return ret;
/* Mask all interrupts */
return regmap_update_bits(data->regmap, ADUX1020_REG_INT_MASK,
ADUX1020_MODE_INT_MASK, ADUX1020_MODE_INT_DISABLE);
}
static int adux1020_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct adux1020_data *data;
struct iio_dev *indio_dev;
int ret;
indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
if (!indio_dev)
return -ENOMEM;
indio_dev->info = &adux1020_info;
indio_dev->name = ADUX1020_DRV_NAME;
indio_dev->channels = adux1020_channels;
indio_dev->num_channels = ARRAY_SIZE(adux1020_channels);
indio_dev->modes = INDIO_DIRECT_MODE;
data = iio_priv(indio_dev);
data->regmap = devm_regmap_init_i2c(client, &adux1020_regmap_config);
if (IS_ERR(data->regmap)) {
dev_err(&client->dev, "regmap initialization failed.\n");
return PTR_ERR(data->regmap);
}
data->client = client;
data->indio_dev = indio_dev;
mutex_init(&data->lock);
ret = adux1020_chip_init(data);
if (ret)
return ret;
if (client->irq) {
ret = devm_request_threaded_irq(&client->dev, client->irq,
NULL, adux1020_interrupt_handler,
IRQF_TRIGGER_HIGH | IRQF_ONESHOT,
ADUX1020_DRV_NAME, indio_dev);
if (ret) {
dev_err(&client->dev, "irq request error %d\n", -ret);
return ret;
}
}
return devm_iio_device_register(&client->dev, indio_dev);
}
static const struct i2c_device_id adux1020_id[] = {
{ "adux1020", 0 },
{}
};
MODULE_DEVICE_TABLE(i2c, adux1020_id);
static const struct of_device_id adux1020_of_match[] = {
{ .compatible = "adi,adux1020" },
{ }
};
MODULE_DEVICE_TABLE(of, adux1020_of_match);
static struct i2c_driver adux1020_driver = {
.driver = {
.name = ADUX1020_DRV_NAME,
.of_match_table = adux1020_of_match,
},
.probe = adux1020_probe,
.id_table = adux1020_id,
};
module_i2c_driver(adux1020_driver);
MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
MODULE_DESCRIPTION("ADUX1020 photometric sensor");
MODULE_LICENSE("GPL");
View Git Blame Copy Permalink