renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 12:43:55 +08:00
Code
408c9861c6
linux-next/drivers/usb/core/quirks.c
Devin Heitmueller 6836796de4 Add USB quirk for HVR-950q to avoid intermittent device resets 
The USB core and sysfs will attempt to enumerate certain parameters
which are unsupported by the au0828 - causing inconsistent behavior
and sometimes causing the chip to reset.  Avoid making these calls.

This problem manifested as intermittent cases where the au8522 would
be reset on analog video startup, in particular when starting up ALSA
audio streaming in parallel - the sysfs entries created by
snd-usb-audio on streaming startup would result in unsupported control
messages being sent during tuning which would put the chip into an
unknown state.

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-06-29 14:49:06 +02:00

357 lines
11 KiB
C
Raw Blame History

/*
* USB device quirk handling logic and table
*
* Copyright (c) 2007 Oliver Neukum
* Copyright (c) 2007 Greg Kroah-Hartman <gregkh@suse.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the Free
* Software Foundation, version 2.
*
*
*/
#include <linux/usb.h>
#include <linux/usb/quirks.h>
#include <linux/usb/hcd.h>
#include "usb.h"
/* Lists of quirky USB devices, split in device quirks and interface quirks.
* Device quirks are applied at the very beginning of the enumeration process,
* right after reading the device descriptor. They can thus only match on device
* information.
*
* Interface quirks are applied after reading all the configuration descriptors.
* They can match on both device and interface information.
*
* Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as
* interface quirks, as they only influence the enumeration process which is run
* before processing the interface quirks.
*
* Please keep the lists ordered by:
* 1) Vendor ID
* 2) Product ID
* 3) Class ID
*/
static const struct usb_device_id usb_quirk_list[] = {
/* CBM - Flash disk */
{ USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },
/* WORLDE easy key (easykey.25) MIDI controller */
{ USB_DEVICE(0x0218, 0x0401), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* HP 5300/5370C scanner */
{ USB_DEVICE(0x03f0, 0x0701), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
/* USB3503 */
{ USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft Wireless Laser Mouse 6000 Receiver */
{ USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech HD Pro Webcams C920 and C930e */
{ USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech ConferenceCam CC3000e */
{ USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },
{ USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech PTZ Pro Camera */
{ USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },
/* Logitech Quickcam Fusion */
{ USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Orbit MP */
{ USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Pro for Notebook */
{ USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam Pro 5000 */
{ USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam OEM Dell Notebook */
{ USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Quickcam OEM Cisco VT Camera II */
{ USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Harmony 700-series */
{ USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },
/* Philips PSC805 audio device */
{ USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },
/* Plantronic Audio 655 DSP */
{ USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },
/* Plantronic Audio 648 USB */
{ USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },
/* Artisman Watchdog Dongle */
{ USB_DEVICE(0x04b4, 0x0526), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Microchip Joss Optical infrared touchboard device */
{ USB_DEVICE(0x04d8, 0x000c), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* CarrolTouch 4000U */
{ USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },
/* CarrolTouch 4500U */
{ USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },
/* Samsung Android phone modem - ID conflict with SPH-I500 */
{ USB_DEVICE(0x04e8, 0x6601), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Elan Touchscreen */
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x009b), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x010c), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x0125), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x016f), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
{ USB_DEVICE(0x04f3, 0x0381), .driver_info =
USB_QUIRK_NO_LPM },
{ USB_DEVICE(0x04f3, 0x21b8), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
/* Edirol SD-20 */
{ USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },
/* Alcor Micro Corp. Hub */
{ USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },
/* appletouch */
{ USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },
/* Avision AV600U */
{ USB_DEVICE(0x0638, 0x0a13), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* Saitek Cyborg Gold Joystick */
{ USB_DEVICE(0x06a3, 0x0006), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */
{ USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },
/* Guillemot Webcam Hercules Dualpix Exchange*/
{ USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },
/* Midiman M-Audio Keystation 88es */
{ USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },
/* M-Systems Flash Disk Pioneers */
{ USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },
/* Baum Vario Ultra */
{ USB_DEVICE(0x0904, 0x6101), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
{ USB_DEVICE(0x0904, 0x6102), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
{ USB_DEVICE(0x0904, 0x6103), .driver_info =
USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },
/* Keytouch QWERTY Panel keyboard */
{ USB_DEVICE(0x0926, 0x3333), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */
{ USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },
/* Broadcom BCM92035DGROM BT dongle */
{ USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },
/* MAYA44USB sound device */
{ USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },
/* ASUS Base Station(T100) */
{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
USB_QUIRK_IGNORE_REMOTE_WAKEUP },
/* Action Semiconductor flash disk */
{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
USB_QUIRK_STRING_FETCH_255 },
/* SKYMEDI USB_DRIVE */
{ USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },
/* Razer - Razer Blade Keyboard */
{ USB_DEVICE(0x1532, 0x0116), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
/* BUILDWIN Photo Frame */
{ USB_DEVICE(0x1908, 0x1315), .driver_info =
USB_QUIRK_HONOR_BNUMINTERFACES },
/* Protocol and OTG Electrical Test Device */
{ USB_DEVICE(0x1a0a, 0x0200), .driver_info =
USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },
/* Acer C120 LED Projector */
{ USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design Intensity Shuttle */
{ USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },
/* Blackmagic Design UltraStudio SDI */
{ USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },
/* Hauppauge HVR-950q */
{ USB_DEVICE(0x2040, 0x7200), .driver_info =
USB_QUIRK_CONFIG_INTF_STRINGS },
/* INTEL VALUE SSD */
{ USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
static const struct usb_device_id usb_interface_quirk_list[] = {
/* Logitech UVC Cameras */
{ USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),
.driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
static const struct usb_device_id usb_amd_resume_quirk_list[] = {
/* Lenovo Mouse with Pixart controller */
{ USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },
/* Pixart Mouse */
{ USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },
/* Logitech Optical Mouse M90/M100 */
{ USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },
{ } /* terminating entry must be last */
};
static bool usb_match_any_interface(struct usb_device *udev,
const struct usb_device_id *id)
{
unsigned int i;
for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {
struct usb_host_config *cfg = &udev->config[i];
unsigned int j;
for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {
struct usb_interface_cache *cache;
struct usb_host_interface *intf;
cache = cfg->intf_cache[j];
if (cache->num_altsetting == 0)
continue;
intf = &cache->altsetting[0];
if (usb_match_one_id_intf(udev, intf, id))
return true;
}
}
return false;
}
static int usb_amd_resume_quirk(struct usb_device *udev)
{
struct usb_hcd *hcd;
hcd = bus_to_hcd(udev->bus);
/* The device should be attached directly to root hub */
if (udev->level == 1 && hcd->amd_resume_bug == 1)
return 1;
return 0;
}
static u32 __usb_detect_quirks(struct usb_device *udev,
const struct usb_device_id *id)
{
u32 quirks = 0;
for (; id->match_flags; id++) {
if (!usb_match_device(udev, id))
continue;
if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&
!usb_match_any_interface(udev, id))
continue;
quirks |= (u32)(id->driver_info);
}
return quirks;
}
/*
* Detect any quirks the device has, and do any housekeeping for it if needed.
*/
void usb_detect_quirks(struct usb_device *udev)
{
udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);
/*
* Pixart-based mice would trigger remote wakeup issue on AMD
* Yangtze chipset, so set them as RESET_RESUME flag.
*/
if (usb_amd_resume_quirk(udev))
udev->quirks |= __usb_detect_quirks(udev,
usb_amd_resume_quirk_list);
if (udev->quirks)
dev_dbg(&udev->dev, "USB quirks for this device: %x\n",
udev->quirks);
#ifdef CONFIG_USB_DEFAULT_PERSIST
if (!(udev->quirks & USB_QUIRK_RESET))
udev->persist_enabled = 1;
#else
/* Hubs are automatically enabled for USB-PERSIST */
if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)
udev->persist_enabled = 1;
#endif /* CONFIG_USB_DEFAULT_PERSIST */
}
void usb_detect_interface_quirks(struct usb_device *udev)
{
u32 quirks;
quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);
if (quirks == 0)
return;
dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",
quirks);
udev->quirks |= quirks;
}
View Git Blame Copy Permalink