mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 22:53:55 +08:00
403e0689d2
This patch adds the support of bus frequency feature for sub-blocks which share
the one power line. If each bus depends on the power line, each bus is not able
to change the voltage by oneself. To optimize the power-consumption on runtime,
some buses using the same power line should change the source clock and
regulator at the same time. So, this patch uses the passive governor to support
the bus frequency for all buses which sharing the one power line.
For example,
Exynos3250 include the two power line for AXI buses as following:
: VDD_MIF : MIF (Memory Interface) provide the DMC (Dynamic Memory Controller)
with the power (regulator).
: VDD_INT : INT (Internal) provide the various sub-blocks with the power
(regulator).
Each bus is included in as follwoing block. In the case of VDD_MIF, only DMC bus
use the power line. So, there is no any depencency between buese. But, in the
case of VDD_INT, various buses share the one power line of VDD_INT. We need to
make the depenency between buses. When using passive governor, there is no
problem to support the bus frequency as DVFS for all buses. One bus should be
operated as the parent bus device which gathering the current load of INT block
and then decides the new frequency with some governors except of passive
governor. After deciding the new frequency by the parent bus device, the rest
bus devices will change the each source clock according to new frequency of the
parent bus device.
- MIF (Memory Interface) block
: VDD_MIF |--- DMC
- INT (Internal) block
: VDD_INT |--- LEFTBUS (parent)
|--- PERIL
|--- MFC
|--- G3D
|--- RIGHTBUS
|--- FSYS
|--- LCD0
|--- PERIR
|--- ISP
|--- CAM
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
[tjakobi: Reported debugfs error during booting and cw00.choi fix it.]
Reported-by: Tobias Jakobi <tjakobi@math.uni-bielefeld.de>
Signed-off-by: MyungJoo Ham <myungjoo.ham@samsung.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
128 lines
4.8 KiB
Plaintext
128 lines
4.8 KiB
Plaintext
menuconfig PM_DEVFREQ
|
|
bool "Generic Dynamic Voltage and Frequency Scaling (DVFS) support"
|
|
select SRCU
|
|
help
|
|
A device may have a list of frequencies and voltages available.
|
|
devfreq, a generic DVFS framework can be registered for a device
|
|
in order to let the governor provided to devfreq choose an
|
|
operating frequency based on the device driver's policy.
|
|
|
|
Each device may have its own governor and policy. Devfreq can
|
|
reevaluate the device state periodically and/or based on the
|
|
notification to "nb", a notifier block, of devfreq.
|
|
|
|
Like some CPUs with CPUfreq, a device may have multiple clocks.
|
|
However, because the clock frequencies of a single device are
|
|
determined by the single device's state, an instance of devfreq
|
|
is attached to a single device and returns a "representative"
|
|
clock frequency of the device, which is also attached
|
|
to a device by 1-to-1. The device registering devfreq takes the
|
|
responsibility to "interpret" the representative frequency and
|
|
to set its every clock accordingly with the "target" callback
|
|
given to devfreq.
|
|
|
|
When OPP is used with the devfreq device, it is recommended to
|
|
register devfreq's nb to the OPP's notifier head. If OPP is
|
|
used with the devfreq device, you may use OPP helper
|
|
functions defined in devfreq.h.
|
|
|
|
if PM_DEVFREQ
|
|
|
|
comment "DEVFREQ Governors"
|
|
|
|
config DEVFREQ_GOV_SIMPLE_ONDEMAND
|
|
tristate "Simple Ondemand"
|
|
help
|
|
Chooses frequency based on the recent load on the device. Works
|
|
similar as ONDEMAND governor of CPUFREQ does. A device with
|
|
Simple-Ondemand should be able to provide busy/total counter
|
|
values that imply the usage rate. A device may provide tuned
|
|
values to the governor with data field at devfreq_add_device().
|
|
|
|
config DEVFREQ_GOV_PERFORMANCE
|
|
tristate "Performance"
|
|
help
|
|
Sets the frequency at the maximum available frequency.
|
|
This governor always returns UINT_MAX as frequency so that
|
|
the DEVFREQ framework returns the highest frequency available
|
|
at any time.
|
|
|
|
config DEVFREQ_GOV_POWERSAVE
|
|
tristate "Powersave"
|
|
help
|
|
Sets the frequency at the minimum available frequency.
|
|
This governor always returns 0 as frequency so that
|
|
the DEVFREQ framework returns the lowest frequency available
|
|
at any time.
|
|
|
|
config DEVFREQ_GOV_USERSPACE
|
|
tristate "Userspace"
|
|
help
|
|
Sets the frequency at the user specified one.
|
|
This governor returns the user configured frequency if there
|
|
has been an input to /sys/devices/.../power/devfreq_set_freq.
|
|
Otherwise, the governor does not change the frequency
|
|
given at the initialization.
|
|
|
|
config DEVFREQ_GOV_PASSIVE
|
|
tristate "Passive"
|
|
help
|
|
Sets the frequency based on the frequency of its parent devfreq
|
|
device. This governor does not change the frequency by itself
|
|
through sysfs entries. The passive governor recommends that
|
|
devfreq device uses the OPP table to get the frequency/voltage.
|
|
|
|
comment "DEVFREQ Drivers"
|
|
|
|
config ARM_EXYNOS_BUS_DEVFREQ
|
|
bool "ARM EXYNOS Generic Memory Bus DEVFREQ Driver"
|
|
depends on ARCH_EXYNOS
|
|
select DEVFREQ_GOV_SIMPLE_ONDEMAND
|
|
select DEVFREQ_GOV_PASSIVE
|
|
select DEVFREQ_EVENT_EXYNOS_PPMU
|
|
select PM_DEVFREQ_EVENT
|
|
select PM_OPP
|
|
help
|
|
This adds the common DEVFREQ driver for Exynos Memory bus. Exynos
|
|
Memory bus has one more group of memory bus (e.g, MIF and INT block).
|
|
Each memory bus group could contain many memoby bus block. It reads
|
|
PPMU counters of memory controllers by using DEVFREQ-event device
|
|
and adjusts the operating frequencies and voltages with OPP support.
|
|
This does not yet operate with optimal voltages.
|
|
|
|
config ARM_EXYNOS4_BUS_DEVFREQ
|
|
bool "ARM Exynos4210/4212/4412 Memory Bus DEVFREQ Driver"
|
|
depends on (CPU_EXYNOS4210 || SOC_EXYNOS4212 || SOC_EXYNOS4412) && !ARCH_MULTIPLATFORM
|
|
select DEVFREQ_GOV_SIMPLE_ONDEMAND
|
|
select PM_OPP
|
|
help
|
|
This adds the DEVFREQ driver for Exynos4210 memory bus (vdd_int)
|
|
and Exynos4212/4412 memory interface and bus (vdd_mif + vdd_int).
|
|
It reads PPMU counters of memory controllers and adjusts
|
|
the operating frequencies and voltages with OPP support.
|
|
This does not yet operate with optimal voltages.
|
|
|
|
config ARM_EXYNOS5_BUS_DEVFREQ
|
|
tristate "ARM Exynos5250 Bus DEVFREQ Driver"
|
|
depends on SOC_EXYNOS5250
|
|
select DEVFREQ_GOV_SIMPLE_ONDEMAND
|
|
select PM_OPP
|
|
help
|
|
This adds the DEVFREQ driver for Exynos5250 bus interface (vdd_int).
|
|
It reads PPMU counters of memory controllers and adjusts the
|
|
operating frequencies and voltages with OPP support.
|
|
|
|
config ARM_TEGRA_DEVFREQ
|
|
tristate "Tegra DEVFREQ Driver"
|
|
depends on ARCH_TEGRA_124_SOC
|
|
select DEVFREQ_GOV_SIMPLE_ONDEMAND
|
|
select PM_OPP
|
|
help
|
|
This adds the DEVFREQ driver for the Tegra family of SoCs.
|
|
It reads ACTMON counters of memory controllers and adjusts the
|
|
operating frequencies and voltages with OPP support.
|
|
|
|
source "drivers/devfreq/event/Kconfig"
|
|
|
|
endif # PM_DEVFREQ
|