2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-17 01:34:00 +08:00
linux-next/drivers/watchdog/rzg2l_wdt.c
Biju Das 4055ee8100 watchdog: rzg2l_wdt: Add set_timeout callback
This patch adds support for set_timeout callback.

Once WDT is started, the WDT cycle setting register(WDTSET) can be updated
only after issuing a module reset. Otherwise, it will ignore the writes
and will hold the previous value. This patch updates the WDTSET register
if it is active.

Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220225175320.11041-8-biju.das.jz@bp.renesas.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
2022-05-08 10:34:04 +02:00

275 lines
7.1 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas RZ/G2L WDT Watchdog Driver
*
* Copyright (C) 2021 Renesas Electronics Corporation
*/
#include <linux/bitops.h>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/reset.h>
#include <linux/units.h>
#include <linux/watchdog.h>
#define WDTCNT 0x00
#define WDTSET 0x04
#define WDTTIM 0x08
#define WDTINT 0x0C
#define PECR 0x10
#define PEEN 0x14
#define WDTCNT_WDTEN BIT(0)
#define WDTINT_INTDISP BIT(0)
#define PEEN_FORCE BIT(0)
#define WDT_DEFAULT_TIMEOUT 60U
/* Setting period time register only 12 bit set in WDTSET[31:20] */
#define WDTSET_COUNTER_MASK (0xFFF00000)
#define WDTSET_COUNTER_VAL(f) ((f) << 20)
#define F2CYCLE_NSEC(f) (1000000000 / (f))
static bool nowayout = WATCHDOG_NOWAYOUT;
module_param(nowayout, bool, 0);
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
struct rzg2l_wdt_priv {
void __iomem *base;
struct watchdog_device wdev;
struct reset_control *rstc;
unsigned long osc_clk_rate;
unsigned long delay;
struct clk *pclk;
struct clk *osc_clk;
};
static void rzg2l_wdt_wait_delay(struct rzg2l_wdt_priv *priv)
{
/* delay timer when change the setting register */
ndelay(priv->delay);
}
static u32 rzg2l_wdt_get_cycle_usec(unsigned long cycle, u32 wdttime)
{
u64 timer_cycle_us = 1024 * 1024ULL * (wdttime + 1) * MICRO;
return div64_ul(timer_cycle_us, cycle);
}
static void rzg2l_wdt_write(struct rzg2l_wdt_priv *priv, u32 val, unsigned int reg)
{
if (reg == WDTSET)
val &= WDTSET_COUNTER_MASK;
writel_relaxed(val, priv->base + reg);
/* Registers other than the WDTINT is always synchronized with WDT_CLK */
if (reg != WDTINT)
rzg2l_wdt_wait_delay(priv);
}
static void rzg2l_wdt_init_timeout(struct watchdog_device *wdev)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
u32 time_out;
/* Clear Lapsed Time Register and clear Interrupt */
rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
/* 2 consecutive overflow cycle needed to trigger reset */
time_out = (wdev->timeout * (MICRO / 2)) /
rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0);
rzg2l_wdt_write(priv, WDTSET_COUNTER_VAL(time_out), WDTSET);
}
static int rzg2l_wdt_start(struct watchdog_device *wdev)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
pm_runtime_get_sync(wdev->parent);
/* Initialize time out */
rzg2l_wdt_init_timeout(wdev);
/* Initialize watchdog counter register */
rzg2l_wdt_write(priv, 0, WDTTIM);
/* Enable watchdog timer*/
rzg2l_wdt_write(priv, WDTCNT_WDTEN, WDTCNT);
return 0;
}
static int rzg2l_wdt_stop(struct watchdog_device *wdev)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
pm_runtime_put(wdev->parent);
reset_control_reset(priv->rstc);
return 0;
}
static int rzg2l_wdt_set_timeout(struct watchdog_device *wdev, unsigned int timeout)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
wdev->timeout = timeout;
/*
* If the watchdog is active, reset the module for updating the WDTSET
* register so that it is updated with new timeout values.
*/
if (watchdog_active(wdev)) {
pm_runtime_put(wdev->parent);
reset_control_reset(priv->rstc);
rzg2l_wdt_start(wdev);
}
return 0;
}
static int rzg2l_wdt_restart(struct watchdog_device *wdev,
unsigned long action, void *data)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
clk_prepare_enable(priv->pclk);
clk_prepare_enable(priv->osc_clk);
/* Generate Reset (WDTRSTB) Signal on parity error */
rzg2l_wdt_write(priv, 0, PECR);
/* Force parity error */
rzg2l_wdt_write(priv, PEEN_FORCE, PEEN);
return 0;
}
static const struct watchdog_info rzg2l_wdt_ident = {
.options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
.identity = "Renesas RZ/G2L WDT Watchdog",
};
static int rzg2l_wdt_ping(struct watchdog_device *wdev)
{
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
rzg2l_wdt_write(priv, WDTINT_INTDISP, WDTINT);
return 0;
}
static const struct watchdog_ops rzg2l_wdt_ops = {
.owner = THIS_MODULE,
.start = rzg2l_wdt_start,
.stop = rzg2l_wdt_stop,
.ping = rzg2l_wdt_ping,
.set_timeout = rzg2l_wdt_set_timeout,
.restart = rzg2l_wdt_restart,
};
static void rzg2l_wdt_reset_assert_pm_disable(void *data)
{
struct watchdog_device *wdev = data;
struct rzg2l_wdt_priv *priv = watchdog_get_drvdata(wdev);
pm_runtime_disable(wdev->parent);
reset_control_assert(priv->rstc);
}
static int rzg2l_wdt_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct rzg2l_wdt_priv *priv;
unsigned long pclk_rate;
int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
priv->base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(priv->base))
return PTR_ERR(priv->base);
/* Get watchdog main clock */
priv->osc_clk = devm_clk_get(&pdev->dev, "oscclk");
if (IS_ERR(priv->osc_clk))
return dev_err_probe(&pdev->dev, PTR_ERR(priv->osc_clk), "no oscclk");
priv->osc_clk_rate = clk_get_rate(priv->osc_clk);
if (!priv->osc_clk_rate)
return dev_err_probe(&pdev->dev, -EINVAL, "oscclk rate is 0");
/* Get Peripheral clock */
priv->pclk = devm_clk_get(&pdev->dev, "pclk");
if (IS_ERR(priv->pclk))
return dev_err_probe(&pdev->dev, PTR_ERR(priv->pclk), "no pclk");
pclk_rate = clk_get_rate(priv->pclk);
if (!pclk_rate)
return dev_err_probe(&pdev->dev, -EINVAL, "pclk rate is 0");
priv->delay = F2CYCLE_NSEC(priv->osc_clk_rate) * 6 + F2CYCLE_NSEC(pclk_rate) * 9;
priv->rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL);
if (IS_ERR(priv->rstc))
return dev_err_probe(&pdev->dev, PTR_ERR(priv->rstc),
"failed to get cpg reset");
ret = reset_control_deassert(priv->rstc);
if (ret)
return dev_err_probe(dev, ret, "failed to deassert");
pm_runtime_enable(&pdev->dev);
priv->wdev.info = &rzg2l_wdt_ident;
priv->wdev.ops = &rzg2l_wdt_ops;
priv->wdev.parent = dev;
priv->wdev.min_timeout = 1;
priv->wdev.max_timeout = rzg2l_wdt_get_cycle_usec(priv->osc_clk_rate, 0xfff) /
USEC_PER_SEC;
priv->wdev.timeout = WDT_DEFAULT_TIMEOUT;
watchdog_set_drvdata(&priv->wdev, priv);
ret = devm_add_action_or_reset(&pdev->dev,
rzg2l_wdt_reset_assert_pm_disable,
&priv->wdev);
if (ret < 0)
return ret;
watchdog_set_nowayout(&priv->wdev, nowayout);
watchdog_stop_on_unregister(&priv->wdev);
ret = watchdog_init_timeout(&priv->wdev, 0, dev);
if (ret)
dev_warn(dev, "Specified timeout invalid, using default");
return devm_watchdog_register_device(&pdev->dev, &priv->wdev);
}
static const struct of_device_id rzg2l_wdt_ids[] = {
{ .compatible = "renesas,rzg2l-wdt", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, rzg2l_wdt_ids);
static struct platform_driver rzg2l_wdt_driver = {
.driver = {
.name = "rzg2l_wdt",
.of_match_table = rzg2l_wdt_ids,
},
.probe = rzg2l_wdt_probe,
};
module_platform_driver(rzg2l_wdt_driver);
MODULE_DESCRIPTION("Renesas RZ/G2L WDT Watchdog Driver");
MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
MODULE_LICENSE("GPL v2");