renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 22:24:09 +08:00
Code
3f8499ac7c
linux-next/drivers/usb/host/ohci-da8xx.c
Greg Kroah-Hartman ef1362d9c0 USB: host: ohci: Remove redundant license text 
Now that the SPDX tag is in all USB files, that identifies the license
in a specific and legally-defined manner.  So the extra GPL text wording
can be removed as it is no longer needed at all.

This is done on a quest to remove the 700+ different ways that files in
the kernel describe the GPL license text.  And there's unneeded stuff
like the address (sometimes incorrect) for the FSF which is never
needed.

No copyright headers or other non-license-description text was removed.

Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-07 15:45:02 +01:00

592 lines
14 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* OHCI HCD (Host Controller Driver) for USB.
*
* TI DA8xx (OMAP-L1x) Bus Glue
*
* Derived from: ohci-omap.c and ohci-s3c2410.c
* Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*/
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/platform_data/usb-davinci.h>
#include <linux/regulator/consumer.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <asm/unaligned.h>
#include "ohci.h"
#define DRIVER_DESC "DA8XX"
#define DRV_NAME "ohci-da8xx"
static struct hc_driver __read_mostly ohci_da8xx_hc_driver;
static int (*orig_ohci_hub_control)(struct usb_hcd *hcd, u16 typeReq,
u16 wValue, u16 wIndex, char *buf, u16 wLength);
static int (*orig_ohci_hub_status_data)(struct usb_hcd *hcd, char *buf);
struct da8xx_ohci_hcd {
struct usb_hcd *hcd;
struct clk *usb11_clk;
struct phy *usb11_phy;
struct regulator *vbus_reg;
struct notifier_block nb;
unsigned int reg_enabled;
};
#define to_da8xx_ohci(hcd) (struct da8xx_ohci_hcd *)(hcd_to_ohci(hcd)->priv)
/* Over-current indicator change bitmask */
static volatile u16 ocic_mask;
static int ohci_da8xx_enable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
int ret;
ret = clk_prepare_enable(da8xx_ohci->usb11_clk);
if (ret)
return ret;
ret = phy_init(da8xx_ohci->usb11_phy);
if (ret)
goto err_phy_init;
ret = phy_power_on(da8xx_ohci->usb11_phy);
if (ret)
goto err_phy_power_on;
return 0;
err_phy_power_on:
phy_exit(da8xx_ohci->usb11_phy);
err_phy_init:
clk_disable_unprepare(da8xx_ohci->usb11_clk);
return ret;
}
static void ohci_da8xx_disable(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
phy_power_off(da8xx_ohci->usb11_phy);
phy_exit(da8xx_ohci->usb11_phy);
clk_disable_unprepare(da8xx_ohci->usb11_clk);
}
static int ohci_da8xx_set_power(struct usb_hcd *hcd, int on)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret;
if (hub && hub->set_power)
return hub->set_power(1, on);
if (!da8xx_ohci->vbus_reg)
return 0;
if (on && !da8xx_ohci->reg_enabled) {
ret = regulator_enable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to enable regulator: %d\n", ret);
return ret;
}
da8xx_ohci->reg_enabled = 1;
} else if (!on && da8xx_ohci->reg_enabled) {
ret = regulator_disable(da8xx_ohci->vbus_reg);
if (ret) {
dev_err(dev, "Failed to disable regulator: %d\n", ret);
return ret;
}
da8xx_ohci->reg_enabled = 0;
}
return 0;
}
static int ohci_da8xx_get_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_power)
return hub->get_power(1);
if (da8xx_ohci->vbus_reg)
return regulator_is_enabled(da8xx_ohci->vbus_reg);
return 1;
}
static int ohci_da8xx_get_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
unsigned int flags;
int ret;
if (hub && hub->get_oci)
return hub->get_oci(1);
if (!da8xx_ohci->vbus_reg)
return 0;
ret = regulator_get_error_flags(da8xx_ohci->vbus_reg, &flags);
if (ret)
return ret;
if (flags & REGULATOR_ERROR_OVER_CURRENT)
return 1;
return 0;
}
static int ohci_da8xx_has_set_power(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->set_power)
return 1;
if (da8xx_ohci->vbus_reg)
return 1;
return 0;
}
static int ohci_da8xx_has_oci(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->get_oci)
return 1;
if (da8xx_ohci->vbus_reg)
return 1;
return 0;
}
static int ohci_da8xx_has_potpgt(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->potpgt)
return 1;
return 0;
}
/*
* Handle the port over-current indicator change.
*/
static void ohci_da8xx_ocic_handler(struct da8xx_ohci_root_hub *hub,
unsigned port)
{
ocic_mask |= 1 << port;
/* Once over-current is detected, the port needs to be powered down */
if (hub->get_oci(port) > 0)
hub->set_power(port, 0);
}
static int ohci_da8xx_regulator_event(struct notifier_block *nb,
unsigned long event, void *data)
{
struct da8xx_ohci_hcd *da8xx_ohci =
container_of(nb, struct da8xx_ohci_hcd, nb);
if (event & REGULATOR_EVENT_OVER_CURRENT) {
ocic_mask |= 1 << 1;
ohci_da8xx_set_power(da8xx_ohci->hcd, 0);
}
return 0;
}
static int ohci_da8xx_register_notify(struct usb_hcd *hcd)
{
struct da8xx_ohci_hcd *da8xx_ohci = to_da8xx_ohci(hcd);
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
int ret = 0;
if (hub && hub->ocic_notify) {
ret = hub->ocic_notify(ohci_da8xx_ocic_handler);
} else if (da8xx_ohci->vbus_reg) {
da8xx_ohci->nb.notifier_call = ohci_da8xx_regulator_event;
ret = devm_regulator_register_notifier(da8xx_ohci->vbus_reg,
&da8xx_ohci->nb);
}
if (ret)
dev_err(dev, "Failed to register notifier: %d\n", ret);
return ret;
}
static void ohci_da8xx_unregister_notify(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
if (hub && hub->ocic_notify)
hub->ocic_notify(NULL);
}
static int ohci_da8xx_reset(struct usb_hcd *hcd)
{
struct device *dev = hcd->self.controller;
struct da8xx_ohci_root_hub *hub = dev_get_platdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int result;
u32 rh_a;
dev_dbg(dev, "starting USB controller\n");
result = ohci_da8xx_enable(hcd);
if (result < 0)
return result;
/*
* DA8xx only have 1 port connected to the pins but the HC root hub
* register A reports 2 ports, thus we'll have to override it...
*/
ohci->num_ports = 1;
result = ohci_setup(hcd);
if (result < 0) {
ohci_da8xx_disable(hcd);
return result;
}
/*
* Since we're providing a board-specific root hub port power control
* and over-current reporting, we have to override the HC root hub A
* register's default value, so that ohci_hub_control() could return
* the correct hub descriptor...
*/
rh_a = ohci_readl(ohci, &ohci->regs->roothub.a);
if (ohci_da8xx_has_set_power(hcd)) {
rh_a &= ~RH_A_NPS;
rh_a |= RH_A_PSM;
}
if (ohci_da8xx_has_oci(hcd)) {
rh_a &= ~RH_A_NOCP;
rh_a |= RH_A_OCPM;
}
if (ohci_da8xx_has_potpgt(hcd)) {
rh_a &= ~RH_A_POTPGT;
rh_a |= hub->potpgt << 24;
}
ohci_writel(ohci, rh_a, &ohci->regs->roothub.a);
return result;
}
/*
* Update the status data from the hub with the over-current indicator change.
*/
static int ohci_da8xx_hub_status_data(struct usb_hcd *hcd, char *buf)
{
int length = orig_ohci_hub_status_data(hcd, buf);
/* See if we have OCIC bit set on port 1 */
if (ocic_mask & (1 << 1)) {
dev_dbg(hcd->self.controller, "over-current indicator change "
"on port 1\n");
if (!length)
length = 1;
buf[0] |= 1 << 1;
}
return length;
}
/*
* Look at the control requests to the root hub and see if we need to override.
*/
static int ohci_da8xx_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
u16 wIndex, char *buf, u16 wLength)
{
struct device *dev = hcd->self.controller;
int temp;
switch (typeReq) {
case GetPortStatus:
/* Check the port number */
if (wIndex != 1)
break;
dev_dbg(dev, "GetPortStatus(%u)\n", wIndex);
temp = roothub_portstatus(hcd_to_ohci(hcd), wIndex - 1);
/* The port power status (PPS) bit defaults to 1 */
if (!ohci_da8xx_get_power(hcd))
temp &= ~RH_PS_PPS;
/* The port over-current indicator (POCI) bit is always 0 */
if (ohci_da8xx_get_oci(hcd) > 0)
temp |= RH_PS_POCI;
/* The over-current indicator change (OCIC) bit is 0 too */
if (ocic_mask & (1 << wIndex))
temp |= RH_PS_OCIC;
put_unaligned(cpu_to_le32(temp), (__le32 *)buf);
return 0;
case SetPortFeature:
temp = 1;
goto check_port;
case ClearPortFeature:
temp = 0;
check_port:
/* Check the port number */
if (wIndex != 1)
break;
switch (wValue) {
case USB_PORT_FEAT_POWER:
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex, "POWER");
return ohci_da8xx_set_power(hcd, temp) ? -EPIPE : 0;
case USB_PORT_FEAT_C_OVER_CURRENT:
dev_dbg(dev, "%sPortFeature(%u): %s\n",
temp ? "Set" : "Clear", wIndex,
"C_OVER_CURRENT");
if (temp)
ocic_mask |= 1 << wIndex;
else
ocic_mask &= ~(1 << wIndex);
return 0;
}
}
return orig_ohci_hub_control(hcd, typeReq, wValue,
wIndex, buf, wLength);
}
/*-------------------------------------------------------------------------*/
#ifdef CONFIG_OF
static const struct of_device_id da8xx_ohci_ids[] = {
{ .compatible = "ti,da830-ohci" },
{ }
};
MODULE_DEVICE_TABLE(of, da8xx_ohci_ids);
#endif
static int ohci_da8xx_probe(struct platform_device *pdev)
{
struct da8xx_ohci_hcd *da8xx_ohci;
struct usb_hcd *hcd;
struct resource *mem;
int error, irq;
hcd = usb_create_hcd(&ohci_da8xx_hc_driver, &pdev->dev,
dev_name(&pdev->dev));
if (!hcd)
return -ENOMEM;
da8xx_ohci = to_da8xx_ohci(hcd);
da8xx_ohci->hcd = hcd;
da8xx_ohci->usb11_clk = devm_clk_get(&pdev->dev, "usb11");
if (IS_ERR(da8xx_ohci->usb11_clk)) {
error = PTR_ERR(da8xx_ohci->usb11_clk);
if (error != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to get clock.\n");
goto err;
}
da8xx_ohci->usb11_phy = devm_phy_get(&pdev->dev, "usb-phy");
if (IS_ERR(da8xx_ohci->usb11_phy)) {
error = PTR_ERR(da8xx_ohci->usb11_phy);
if (error != -EPROBE_DEFER)
dev_err(&pdev->dev, "Failed to get phy.\n");
goto err;
}
da8xx_ohci->vbus_reg = devm_regulator_get_optional(&pdev->dev, "vbus");
if (IS_ERR(da8xx_ohci->vbus_reg)) {
error = PTR_ERR(da8xx_ohci->vbus_reg);
if (error == -ENODEV) {
da8xx_ohci->vbus_reg = NULL;
} else if (error == -EPROBE_DEFER) {
goto err;
} else {
dev_err(&pdev->dev, "Failed to get regulator\n");
goto err;
}
}
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
hcd->regs = devm_ioremap_resource(&pdev->dev, mem);
if (IS_ERR(hcd->regs)) {
error = PTR_ERR(hcd->regs);
goto err;
}
hcd->rsrc_start = mem->start;
hcd->rsrc_len = resource_size(mem);
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
error = -ENODEV;
goto err;
}
error = usb_add_hcd(hcd, irq, 0);
if (error)
goto err;
device_wakeup_enable(hcd->self.controller);
error = ohci_da8xx_register_notify(hcd);
if (error)
goto err_remove_hcd;
return 0;
err_remove_hcd:
usb_remove_hcd(hcd);
err:
usb_put_hcd(hcd);
return error;
}
static int ohci_da8xx_remove(struct platform_device *pdev)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
ohci_da8xx_unregister_notify(hcd);
usb_remove_hcd(hcd);
usb_put_hcd(hcd);
return 0;
}
#ifdef CONFIG_PM
static int ohci_da8xx_suspend(struct platform_device *pdev,
pm_message_t message)
{
struct usb_hcd *hcd = platform_get_drvdata(pdev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
bool do_wakeup = device_may_wakeup(&pdev->dev);
int ret;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ret = ohci_suspend(hcd, do_wakeup);
if (ret)
return ret;
ohci_da8xx_disable(hcd);
hcd->state = HC_STATE_SUSPENDED;
return ret;
}
static int ohci_da8xx_resume(struct platform_device *dev)
{
struct usb_hcd *hcd = platform_get_drvdata(dev);
struct ohci_hcd *ohci = hcd_to_ohci(hcd);
int ret;
if (time_before(jiffies, ohci->next_statechange))
msleep(5);
ohci->next_statechange = jiffies;
ret = ohci_da8xx_enable(hcd);
if (ret)
return ret;
ohci_resume(hcd, false);
return 0;
}
#endif
static const struct ohci_driver_overrides da8xx_overrides __initconst = {
.reset = ohci_da8xx_reset,
.extra_priv_size = sizeof(struct da8xx_ohci_hcd),
};
/*
* Driver definition to register with platform structure.
*/
static struct platform_driver ohci_hcd_da8xx_driver = {
.probe = ohci_da8xx_probe,
.remove = ohci_da8xx_remove,
.shutdown = usb_hcd_platform_shutdown,
#ifdef CONFIG_PM
.suspend = ohci_da8xx_suspend,
.resume = ohci_da8xx_resume,
#endif
.driver = {
.name = DRV_NAME,
.of_match_table = of_match_ptr(da8xx_ohci_ids),
},
};
static int __init ohci_da8xx_init(void)
{
if (usb_disabled())
return -ENODEV;
pr_info("%s: " DRIVER_DESC "\n", DRV_NAME);
ohci_init_driver(&ohci_da8xx_hc_driver, &da8xx_overrides);
/*
* The Davinci da8xx HW has some unusual quirks, which require
* da8xx-specific workarounds. We override certain hc_driver
* functions here to achieve that. We explicitly do not enhance
* ohci_driver_overrides to allow this more easily, since this
* is an unusual case, and we don't want to encourage others to
* override these functions by making it too easy.
*/
orig_ohci_hub_control = ohci_da8xx_hc_driver.hub_control;
orig_ohci_hub_status_data = ohci_da8xx_hc_driver.hub_status_data;
ohci_da8xx_hc_driver.hub_status_data = ohci_da8xx_hub_status_data;
ohci_da8xx_hc_driver.hub_control = ohci_da8xx_hub_control;
return platform_driver_register(&ohci_hcd_da8xx_driver);
}
module_init(ohci_da8xx_init);
static void __exit ohci_da8xx_exit(void)
{
platform_driver_unregister(&ohci_hcd_da8xx_driver);
}
module_exit(ohci_da8xx_exit);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" DRV_NAME);
View Git Blame Copy Permalink