2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-21 19:53:59 +08:00
linux-next/drivers/mfd/omap-usb-host.c
Victor Kamensky 9981a3146c mfd: omap-usb-host: Raw read and write endian fix
All OMAP IP blocks expect LE data, but CPU may operate in BE mode.
Need to use endian neutral functions to read/write h/w registers.
I.e instead of __raw_read[lw] and __raw_write[lw] functions code
need to use read[lw]_relaxed and write[lw]_relaxed functions.
If the first simply reads/writes register, the second will byteswap
it if host operates in BE mode.

Changes are trivial sed like replacement of __raw_xxx functions
with xxx_relaxed variant.

Signed-off-by: Victor Kamensky <victor.kamensky@linaro.org>
Signed-off-by: Taras Kondratiuk <taras.kondratiuk@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2014-01-06 09:13:22 +00:00

926 lines
24 KiB
C

/**
* omap-usb-host.c - The USBHS core driver for OMAP EHCI & OHCI
*
* Copyright (C) 2011-2013 Texas Instruments Incorporated - http://www.ti.com
* Author: Keshava Munegowda <keshava_mgowda@ti.com>
* Author: Roger Quadros <rogerq@ti.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 of
* the License as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/platform_data/usb-omap.h>
#include <linux/pm_runtime.h>
#include <linux/of.h>
#include <linux/of_platform.h>
#include <linux/err.h>
#include "omap-usb.h"
#define USBHS_DRIVER_NAME "usbhs_omap"
#define OMAP_EHCI_DEVICE "ehci-omap"
#define OMAP_OHCI_DEVICE "ohci-omap3"
/* OMAP USBHOST Register addresses */
/* UHH Register Set */
#define OMAP_UHH_REVISION (0x00)
#define OMAP_UHH_SYSCONFIG (0x10)
#define OMAP_UHH_SYSCONFIG_MIDLEMODE (1 << 12)
#define OMAP_UHH_SYSCONFIG_CACTIVITY (1 << 8)
#define OMAP_UHH_SYSCONFIG_SIDLEMODE (1 << 3)
#define OMAP_UHH_SYSCONFIG_ENAWAKEUP (1 << 2)
#define OMAP_UHH_SYSCONFIG_SOFTRESET (1 << 1)
#define OMAP_UHH_SYSCONFIG_AUTOIDLE (1 << 0)
#define OMAP_UHH_SYSSTATUS (0x14)
#define OMAP_UHH_HOSTCONFIG (0x40)
#define OMAP_UHH_HOSTCONFIG_ULPI_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS (1 << 0)
#define OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS (1 << 11)
#define OMAP_UHH_HOSTCONFIG_ULPI_P3_BYPASS (1 << 12)
#define OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN (1 << 2)
#define OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN (1 << 3)
#define OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN (1 << 4)
#define OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN (1 << 5)
#define OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS (1 << 8)
#define OMAP_UHH_HOSTCONFIG_P2_CONNECT_STATUS (1 << 9)
#define OMAP_UHH_HOSTCONFIG_P3_CONNECT_STATUS (1 << 10)
#define OMAP4_UHH_HOSTCONFIG_APP_START_CLK (1 << 31)
/* OMAP4-specific defines */
#define OMAP4_UHH_SYSCONFIG_IDLEMODE_CLEAR (3 << 2)
#define OMAP4_UHH_SYSCONFIG_NOIDLE (1 << 2)
#define OMAP4_UHH_SYSCONFIG_STDBYMODE_CLEAR (3 << 4)
#define OMAP4_UHH_SYSCONFIG_NOSTDBY (1 << 4)
#define OMAP4_UHH_SYSCONFIG_SOFTRESET (1 << 0)
#define OMAP4_P1_MODE_CLEAR (3 << 16)
#define OMAP4_P1_MODE_TLL (1 << 16)
#define OMAP4_P1_MODE_HSIC (3 << 16)
#define OMAP4_P2_MODE_CLEAR (3 << 18)
#define OMAP4_P2_MODE_TLL (1 << 18)
#define OMAP4_P2_MODE_HSIC (3 << 18)
#define OMAP_UHH_DEBUG_CSR (0x44)
/* Values of UHH_REVISION - Note: these are not given in the TRM */
#define OMAP_USBHS_REV1 0x00000010 /* OMAP3 */
#define OMAP_USBHS_REV2 0x50700100 /* OMAP4 */
#define is_omap_usbhs_rev1(x) (x->usbhs_rev == OMAP_USBHS_REV1)
#define is_omap_usbhs_rev2(x) (x->usbhs_rev == OMAP_USBHS_REV2)
#define is_ehci_phy_mode(x) (x == OMAP_EHCI_PORT_MODE_PHY)
#define is_ehci_tll_mode(x) (x == OMAP_EHCI_PORT_MODE_TLL)
#define is_ehci_hsic_mode(x) (x == OMAP_EHCI_PORT_MODE_HSIC)
struct usbhs_hcd_omap {
int nports;
struct clk **utmi_clk;
struct clk **hsic60m_clk;
struct clk **hsic480m_clk;
struct clk *xclk60mhsp1_ck;
struct clk *xclk60mhsp2_ck;
struct clk *utmi_p1_gfclk;
struct clk *utmi_p2_gfclk;
struct clk *init_60m_fclk;
struct clk *ehci_logic_fck;
void __iomem *uhh_base;
struct usbhs_omap_platform_data *pdata;
u32 usbhs_rev;
};
/*-------------------------------------------------------------------------*/
static const char usbhs_driver_name[] = USBHS_DRIVER_NAME;
static u64 usbhs_dmamask = DMA_BIT_MASK(32);
/*-------------------------------------------------------------------------*/
static inline void usbhs_write(void __iomem *base, u32 reg, u32 val)
{
writel_relaxed(val, base + reg);
}
static inline u32 usbhs_read(void __iomem *base, u32 reg)
{
return readl_relaxed(base + reg);
}
static inline void usbhs_writeb(void __iomem *base, u8 reg, u8 val)
{
writeb_relaxed(val, base + reg);
}
static inline u8 usbhs_readb(void __iomem *base, u8 reg)
{
return readb_relaxed(base + reg);
}
/*-------------------------------------------------------------------------*/
/**
* Map 'enum usbhs_omap_port_mode' found in <linux/platform_data/usb-omap.h>
* to the device tree binding portN-mode found in
* 'Documentation/devicetree/bindings/mfd/omap-usb-host.txt'
*/
static const char * const port_modes[] = {
[OMAP_USBHS_PORT_MODE_UNUSED] = "",
[OMAP_EHCI_PORT_MODE_PHY] = "ehci-phy",
[OMAP_EHCI_PORT_MODE_TLL] = "ehci-tll",
[OMAP_EHCI_PORT_MODE_HSIC] = "ehci-hsic",
[OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0] = "ohci-phy-6pin-datse0",
[OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM] = "ohci-phy-6pin-dpdm",
[OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0] = "ohci-phy-3pin-datse0",
[OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM] = "ohci-phy-4pin-dpdm",
[OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0] = "ohci-tll-6pin-datse0",
[OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM] = "ohci-tll-6pin-dpdm",
[OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0] = "ohci-tll-3pin-datse0",
[OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM] = "ohci-tll-4pin-dpdm",
[OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0] = "ohci-tll-2pin-datse0",
[OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM] = "ohci-tll-2pin-dpdm",
};
/**
* omap_usbhs_get_dt_port_mode - Get the 'enum usbhs_omap_port_mode'
* from the port mode string.
* @mode: The port mode string, usually obtained from device tree.
*
* The function returns the 'enum usbhs_omap_port_mode' that matches the
* provided port mode string as per the port_modes table.
* If no match is found it returns -ENODEV
*/
static const int omap_usbhs_get_dt_port_mode(const char *mode)
{
int i;
for (i = 0; i < ARRAY_SIZE(port_modes); i++) {
if (!strcmp(mode, port_modes[i]))
return i;
}
return -ENODEV;
}
static struct platform_device *omap_usbhs_alloc_child(const char *name,
struct resource *res, int num_resources, void *pdata,
size_t pdata_size, struct device *dev)
{
struct platform_device *child;
int ret;
child = platform_device_alloc(name, 0);
if (!child) {
dev_err(dev, "platform_device_alloc %s failed\n", name);
goto err_end;
}
ret = platform_device_add_resources(child, res, num_resources);
if (ret) {
dev_err(dev, "platform_device_add_resources failed\n");
goto err_alloc;
}
ret = platform_device_add_data(child, pdata, pdata_size);
if (ret) {
dev_err(dev, "platform_device_add_data failed\n");
goto err_alloc;
}
child->dev.dma_mask = &usbhs_dmamask;
dma_set_coherent_mask(&child->dev, DMA_BIT_MASK(32));
child->dev.parent = dev;
ret = platform_device_add(child);
if (ret) {
dev_err(dev, "platform_device_add failed\n");
goto err_alloc;
}
return child;
err_alloc:
platform_device_put(child);
err_end:
return NULL;
}
static int omap_usbhs_alloc_children(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
struct platform_device *ehci;
struct platform_device *ohci;
struct resource *res;
struct resource resources[2];
int ret;
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ehci");
if (!res) {
dev_err(dev, "EHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_end;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ehci-irq");
if (!res) {
dev_err(dev, " EHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_end;
}
resources[1] = *res;
ehci = omap_usbhs_alloc_child(OMAP_EHCI_DEVICE, resources, 2, pdata,
sizeof(*pdata), dev);
if (!ehci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_end;
}
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ohci");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_MEM failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[0] = *res;
res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "ohci-irq");
if (!res) {
dev_err(dev, "OHCI get resource IORESOURCE_IRQ failed\n");
ret = -ENODEV;
goto err_ehci;
}
resources[1] = *res;
ohci = omap_usbhs_alloc_child(OMAP_OHCI_DEVICE, resources, 2, pdata,
sizeof(*pdata), dev);
if (!ohci) {
dev_err(dev, "omap_usbhs_alloc_child failed\n");
ret = -ENOMEM;
goto err_ehci;
}
return 0;
err_ehci:
platform_device_unregister(ehci);
err_end:
return ret;
}
static bool is_ohci_port(enum usbhs_omap_port_mode pmode)
{
switch (pmode) {
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_PHY_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_PHY_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_6PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_3PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_4PIN_DPDM:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DATSE0:
case OMAP_OHCI_PORT_MODE_TLL_2PIN_DPDM:
return true;
default:
return false;
}
}
static int usbhs_runtime_resume(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i, r;
dev_dbg(dev, "usbhs_runtime_resume\n");
omap_tll_enable(pdata);
if (!IS_ERR(omap->ehci_logic_fck))
clk_prepare_enable(omap->ehci_logic_fck);
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i])) {
r = clk_prepare_enable(omap->hsic60m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic60m clk:%d\n",
i, r);
}
}
if (!IS_ERR(omap->hsic480m_clk[i])) {
r = clk_prepare_enable(omap->hsic480m_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d hsic480m clk:%d\n",
i, r);
}
}
/* Fall through as HSIC mode needs utmi_clk */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i])) {
r = clk_prepare_enable(omap->utmi_clk[i]);
if (r) {
dev_err(dev,
"Can't enable port %d clk : %d\n",
i, r);
}
}
break;
default:
break;
}
}
return 0;
}
static int usbhs_runtime_suspend(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
dev_dbg(dev, "usbhs_runtime_suspend\n");
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_EHCI_PORT_MODE_HSIC:
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_disable_unprepare(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_disable_unprepare(omap->hsic480m_clk[i]);
/* Fall through as utmi_clks were used in HSIC mode */
case OMAP_EHCI_PORT_MODE_TLL:
if (!IS_ERR(omap->utmi_clk[i]))
clk_disable_unprepare(omap->utmi_clk[i]);
break;
default:
break;
}
}
if (!IS_ERR(omap->ehci_logic_fck))
clk_disable_unprepare(omap->ehci_logic_fck);
omap_tll_disable(pdata);
return 0;
}
static unsigned omap_usbhs_rev1_hostconfig(struct usbhs_hcd_omap *omap,
unsigned reg)
{
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
for (i = 0; i < omap->nports; i++) {
switch (pdata->port_mode[i]) {
case OMAP_USBHS_PORT_MODE_UNUSED:
reg &= ~(OMAP_UHH_HOSTCONFIG_P1_CONNECT_STATUS << i);
break;
case OMAP_EHCI_PORT_MODE_PHY:
if (pdata->single_ulpi_bypass)
break;
if (i == 0)
reg &= ~OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
else
reg &= ~(OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
<< (i-1));
break;
default:
if (pdata->single_ulpi_bypass)
break;
if (i == 0)
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P1_BYPASS;
else
reg |= OMAP_UHH_HOSTCONFIG_ULPI_P2_BYPASS
<< (i-1);
break;
}
}
if (pdata->single_ulpi_bypass) {
/* bypass ULPI only if none of the ports use PHY mode */
reg |= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(pdata->port_mode[i])) {
reg &= OMAP_UHH_HOSTCONFIG_ULPI_BYPASS;
break;
}
}
}
return reg;
}
static unsigned omap_usbhs_rev2_hostconfig(struct usbhs_hcd_omap *omap,
unsigned reg)
{
struct usbhs_omap_platform_data *pdata = omap->pdata;
int i;
for (i = 0; i < omap->nports; i++) {
/* Clear port mode fields for PHY mode */
reg &= ~(OMAP4_P1_MODE_CLEAR << 2 * i);
if (is_ehci_tll_mode(pdata->port_mode[i]) ||
(is_ohci_port(pdata->port_mode[i])))
reg |= OMAP4_P1_MODE_TLL << 2 * i;
else if (is_ehci_hsic_mode(pdata->port_mode[i]))
reg |= OMAP4_P1_MODE_HSIC << 2 * i;
}
return reg;
}
static void omap_usbhs_init(struct device *dev)
{
struct usbhs_hcd_omap *omap = dev_get_drvdata(dev);
unsigned reg;
dev_dbg(dev, "starting TI HSUSB Controller\n");
pm_runtime_get_sync(dev);
reg = usbhs_read(omap->uhh_base, OMAP_UHH_HOSTCONFIG);
/* setup ULPI bypass and burst configurations */
reg |= (OMAP_UHH_HOSTCONFIG_INCR4_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR8_BURST_EN
| OMAP_UHH_HOSTCONFIG_INCR16_BURST_EN);
reg |= OMAP4_UHH_HOSTCONFIG_APP_START_CLK;
reg &= ~OMAP_UHH_HOSTCONFIG_INCRX_ALIGN_EN;
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
reg = omap_usbhs_rev1_hostconfig(omap, reg);
break;
case OMAP_USBHS_REV2:
reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
default: /* newer revisions */
reg = omap_usbhs_rev2_hostconfig(omap, reg);
break;
}
usbhs_write(omap->uhh_base, OMAP_UHH_HOSTCONFIG, reg);
dev_dbg(dev, "UHH setup done, uhh_hostconfig=%x\n", reg);
pm_runtime_put_sync(dev);
}
static int usbhs_omap_get_dt_pdata(struct device *dev,
struct usbhs_omap_platform_data *pdata)
{
int ret, i;
struct device_node *node = dev->of_node;
ret = of_property_read_u32(node, "num-ports", &pdata->nports);
if (ret)
pdata->nports = 0;
if (pdata->nports > OMAP3_HS_USB_PORTS) {
dev_warn(dev, "Too many num_ports <%d> in device tree. Max %d\n",
pdata->nports, OMAP3_HS_USB_PORTS);
return -ENODEV;
}
/* get port modes */
for (i = 0; i < OMAP3_HS_USB_PORTS; i++) {
char prop[11];
const char *mode;
pdata->port_mode[i] = OMAP_USBHS_PORT_MODE_UNUSED;
snprintf(prop, sizeof(prop), "port%d-mode", i + 1);
ret = of_property_read_string(node, prop, &mode);
if (ret < 0)
continue;
ret = omap_usbhs_get_dt_port_mode(mode);
if (ret < 0) {
dev_warn(dev, "Invalid port%d-mode \"%s\" in device tree\n",
i, mode);
return -ENODEV;
}
dev_dbg(dev, "port%d-mode: %s -> %d\n", i, mode, ret);
pdata->port_mode[i] = ret;
}
/* get flags */
pdata->single_ulpi_bypass = of_property_read_bool(node,
"single-ulpi-bypass");
return 0;
}
static struct of_device_id usbhs_child_match_table[] = {
{ .compatible = "ti,omap-ehci", },
{ .compatible = "ti,omap-ohci", },
{ }
};
/**
* usbhs_omap_probe - initialize TI-based HCDs
*
* Allocates basic resources for this USB host controller.
*/
static int usbhs_omap_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct usbhs_omap_platform_data *pdata = dev_get_platdata(dev);
struct usbhs_hcd_omap *omap;
struct resource *res;
int ret = 0;
int i;
bool need_logic_fck;
if (dev->of_node) {
/* For DT boot we populate platform data from OF node */
pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
ret = usbhs_omap_get_dt_pdata(dev, pdata);
if (ret)
return ret;
dev->platform_data = pdata;
}
if (!pdata) {
dev_err(dev, "Missing platform data\n");
return -ENODEV;
}
if (pdata->nports > OMAP3_HS_USB_PORTS) {
dev_info(dev, "Too many num_ports <%d> in platform_data. Max %d\n",
pdata->nports, OMAP3_HS_USB_PORTS);
return -ENODEV;
}
omap = devm_kzalloc(dev, sizeof(*omap), GFP_KERNEL);
if (!omap) {
dev_err(dev, "Memory allocation failed\n");
return -ENOMEM;
}
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
omap->uhh_base = devm_ioremap_resource(dev, res);
if (IS_ERR(omap->uhh_base))
return PTR_ERR(omap->uhh_base);
omap->pdata = pdata;
/* Initialize the TLL subsystem */
omap_tll_init(pdata);
pm_runtime_enable(dev);
platform_set_drvdata(pdev, omap);
pm_runtime_get_sync(dev);
omap->usbhs_rev = usbhs_read(omap->uhh_base, OMAP_UHH_REVISION);
/* we need to call runtime suspend before we update omap->nports
* to prevent unbalanced clk_disable()
*/
pm_runtime_put_sync(dev);
/*
* If platform data contains nports then use that
* else make out number of ports from USBHS revision
*/
if (pdata->nports) {
omap->nports = pdata->nports;
} else {
switch (omap->usbhs_rev) {
case OMAP_USBHS_REV1:
omap->nports = 3;
break;
case OMAP_USBHS_REV2:
omap->nports = 2;
break;
default:
omap->nports = OMAP3_HS_USB_PORTS;
dev_dbg(dev,
"USB HOST Rev:0x%d not recognized, assuming %d ports\n",
omap->usbhs_rev, omap->nports);
break;
}
pdata->nports = omap->nports;
}
i = sizeof(struct clk *) * omap->nports;
omap->utmi_clk = devm_kzalloc(dev, i, GFP_KERNEL);
omap->hsic480m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
omap->hsic60m_clk = devm_kzalloc(dev, i, GFP_KERNEL);
if (!omap->utmi_clk || !omap->hsic480m_clk || !omap->hsic60m_clk) {
dev_err(dev, "Memory allocation failed\n");
ret = -ENOMEM;
goto err_mem;
}
need_logic_fck = false;
for (i = 0; i < omap->nports; i++) {
if (is_ehci_phy_mode(i) || is_ehci_tll_mode(i) ||
is_ehci_hsic_mode(i))
need_logic_fck |= true;
}
omap->ehci_logic_fck = ERR_PTR(-EINVAL);
if (need_logic_fck) {
omap->ehci_logic_fck = clk_get(dev, "ehci_logic_fck");
if (IS_ERR(omap->ehci_logic_fck)) {
ret = PTR_ERR(omap->ehci_logic_fck);
dev_dbg(dev, "ehci_logic_fck failed:%d\n", ret);
}
}
omap->utmi_p1_gfclk = clk_get(dev, "utmi_p1_gfclk");
if (IS_ERR(omap->utmi_p1_gfclk)) {
ret = PTR_ERR(omap->utmi_p1_gfclk);
dev_err(dev, "utmi_p1_gfclk failed error:%d\n", ret);
goto err_p1_gfclk;
}
omap->utmi_p2_gfclk = clk_get(dev, "utmi_p2_gfclk");
if (IS_ERR(omap->utmi_p2_gfclk)) {
ret = PTR_ERR(omap->utmi_p2_gfclk);
dev_err(dev, "utmi_p2_gfclk failed error:%d\n", ret);
goto err_p2_gfclk;
}
omap->xclk60mhsp1_ck = clk_get(dev, "xclk60mhsp1_ck");
if (IS_ERR(omap->xclk60mhsp1_ck)) {
ret = PTR_ERR(omap->xclk60mhsp1_ck);
dev_err(dev, "xclk60mhsp1_ck failed error:%d\n", ret);
goto err_xclk60mhsp1;
}
omap->xclk60mhsp2_ck = clk_get(dev, "xclk60mhsp2_ck");
if (IS_ERR(omap->xclk60mhsp2_ck)) {
ret = PTR_ERR(omap->xclk60mhsp2_ck);
dev_err(dev, "xclk60mhsp2_ck failed error:%d\n", ret);
goto err_xclk60mhsp2;
}
omap->init_60m_fclk = clk_get(dev, "init_60m_fclk");
if (IS_ERR(omap->init_60m_fclk)) {
ret = PTR_ERR(omap->init_60m_fclk);
dev_err(dev, "init_60m_fclk failed error:%d\n", ret);
goto err_init60m;
}
for (i = 0; i < omap->nports; i++) {
char clkname[30];
/* clock names are indexed from 1*/
snprintf(clkname, sizeof(clkname),
"usb_host_hs_utmi_p%d_clk", i + 1);
/* If a clock is not found we won't bail out as not all
* platforms have all clocks and we can function without
* them
*/
omap->utmi_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->utmi_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->utmi_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic480m_p%d_clk", i + 1);
omap->hsic480m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic480m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic480m_clk[i]));
snprintf(clkname, sizeof(clkname),
"usb_host_hs_hsic60m_p%d_clk", i + 1);
omap->hsic60m_clk[i] = clk_get(dev, clkname);
if (IS_ERR(omap->hsic60m_clk[i]))
dev_dbg(dev, "Failed to get clock : %s : %ld\n",
clkname, PTR_ERR(omap->hsic60m_clk[i]));
}
if (is_ehci_phy_mode(pdata->port_mode[0])) {
/* for OMAP3, clk_set_parent fails */
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->xclk60mhsp1_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp1_ck set parent failed: %d\n",
ret);
} else if (is_ehci_tll_mode(pdata->port_mode[0])) {
ret = clk_set_parent(omap->utmi_p1_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P0 init_60m_fclk set parent failed: %d\n",
ret);
}
if (is_ehci_phy_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->xclk60mhsp2_ck);
if (ret != 0)
dev_dbg(dev, "xclk60mhsp2_ck set parent failed: %d\n",
ret);
} else if (is_ehci_tll_mode(pdata->port_mode[1])) {
ret = clk_set_parent(omap->utmi_p2_gfclk,
omap->init_60m_fclk);
if (ret != 0)
dev_dbg(dev, "P1 init_60m_fclk set parent failed: %d\n",
ret);
}
omap_usbhs_init(dev);
if (dev->of_node) {
ret = of_platform_populate(dev->of_node,
usbhs_child_match_table, NULL, dev);
if (ret) {
dev_err(dev, "Failed to create DT children: %d\n", ret);
goto err_alloc;
}
} else {
ret = omap_usbhs_alloc_children(pdev);
if (ret) {
dev_err(dev, "omap_usbhs_alloc_children failed: %d\n",
ret);
goto err_alloc;
}
}
return 0;
err_alloc:
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
err_init60m:
clk_put(omap->xclk60mhsp2_ck);
err_xclk60mhsp2:
clk_put(omap->xclk60mhsp1_ck);
err_xclk60mhsp1:
clk_put(omap->utmi_p2_gfclk);
err_p2_gfclk:
clk_put(omap->utmi_p1_gfclk);
err_p1_gfclk:
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
err_mem:
pm_runtime_disable(dev);
return ret;
}
static int usbhs_omap_remove_child(struct device *dev, void *data)
{
dev_info(dev, "unregistering\n");
platform_device_unregister(to_platform_device(dev));
return 0;
}
/**
* usbhs_omap_remove - shutdown processing for UHH & TLL HCDs
* @pdev: USB Host Controller being removed
*
* Reverses the effect of usbhs_omap_probe().
*/
static int usbhs_omap_remove(struct platform_device *pdev)
{
struct usbhs_hcd_omap *omap = platform_get_drvdata(pdev);
int i;
for (i = 0; i < omap->nports; i++) {
if (!IS_ERR(omap->utmi_clk[i]))
clk_put(omap->utmi_clk[i]);
if (!IS_ERR(omap->hsic60m_clk[i]))
clk_put(omap->hsic60m_clk[i]);
if (!IS_ERR(omap->hsic480m_clk[i]))
clk_put(omap->hsic480m_clk[i]);
}
clk_put(omap->init_60m_fclk);
clk_put(omap->utmi_p1_gfclk);
clk_put(omap->utmi_p2_gfclk);
clk_put(omap->xclk60mhsp2_ck);
clk_put(omap->xclk60mhsp1_ck);
if (!IS_ERR(omap->ehci_logic_fck))
clk_put(omap->ehci_logic_fck);
pm_runtime_disable(&pdev->dev);
/* remove children */
device_for_each_child(&pdev->dev, NULL, usbhs_omap_remove_child);
return 0;
}
static const struct dev_pm_ops usbhsomap_dev_pm_ops = {
.runtime_suspend = usbhs_runtime_suspend,
.runtime_resume = usbhs_runtime_resume,
};
static const struct of_device_id usbhs_omap_dt_ids[] = {
{ .compatible = "ti,usbhs-host" },
{ }
};
MODULE_DEVICE_TABLE(of, usbhs_omap_dt_ids);
static struct platform_driver usbhs_omap_driver = {
.driver = {
.name = (char *)usbhs_driver_name,
.owner = THIS_MODULE,
.pm = &usbhsomap_dev_pm_ops,
.of_match_table = usbhs_omap_dt_ids,
},
.remove = usbhs_omap_remove,
};
MODULE_AUTHOR("Keshava Munegowda <keshava_mgowda@ti.com>");
MODULE_AUTHOR("Roger Quadros <rogerq@ti.com>");
MODULE_ALIAS("platform:" USBHS_DRIVER_NAME);
MODULE_LICENSE("GPL v2");
MODULE_DESCRIPTION("usb host common core driver for omap EHCI and OHCI");
static int __init omap_usbhs_drvinit(void)
{
return platform_driver_probe(&usbhs_omap_driver, usbhs_omap_probe);
}
/*
* init before ehci and ohci drivers;
* The usbhs core driver should be initialized much before
* the omap ehci and ohci probe functions are called.
* This usbhs core driver should be initialized after
* usb tll driver
*/
fs_initcall_sync(omap_usbhs_drvinit);
static void __exit omap_usbhs_drvexit(void)
{
platform_driver_unregister(&usbhs_omap_driver);
}
module_exit(omap_usbhs_drvexit);