Maciej W. Rozycki 8b4a40809e zs: move to the serial subsystem ... This is a reimplementation of the zs driver for the serial subsystem. Any resemblance to the old driver is purely coincidential. ;-) I do hope I got the handling of modem lines right -- better do not tackle me about the issue unless you feel too good... Any users of the old driver: please note the numbers of the serial lines have now been swapped, i.e. ttyS0 <-> ttyS1 and ttyS2 <-> ttyS3. It has to do with the modem lines mentioned above; basically the port A in a given chip has to be initialised before the port B if you want to use the latter as the serial console (which is usually the case), as operations on modem lines of the serial line associated with the port B access both ports (see the comment at the top of the driver for the details of wiring used). Please update your scripts. This is also the reason each SCC now requests an IRQ once only (as seen in "/proc/interrupts") -- the handler takes care of both ports at once as the line associated with the port B has to take status update interrupts from both ports (and yet the line of the port A takes its own for itself too). The old driver never got it right... Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>		2007-07-18 08:38:22 -07:00
..
cpm_uart	[POWERPC] CPM_UART: Use inline function form of eieio	2007-07-10 00:33:19 -05:00
jsm	PCI: Change all drivers to use pci_device->revision	2007-07-11 16:02:10 -07:00
8250_accent.c
8250_acorn.c	[ARM] ecard: add ecardm_iomap() / ecardm_iounmap()	2007-05-11 17:19:02 +01:00
8250_au1x00.c	[SERIAL] AMD Alchemy UART: claim memory range	2006-04-30 11:15:58 +01:00
8250_boca.c
8250_early.c	serial: convert early_uart to earlycon for 8250	2007-07-16 09:05:35 -07:00
8250_exar_st16c554.c	[PATCH] Exar quad port serial	2006-12-07 08:39:35 -08:00
8250_fourport.c
8250_gsc.c	[PARISC] Clean up asm-parisc/serial.h	2006-10-04 06:47:03 -06:00
8250_hp300.c	serial: add early_serial_setup() back to header file	2007-07-18 08:38:22 -07:00
8250_hub6.c
8250_mca.c	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
8250_pci.c	[PATCH] remove many unneeded #includes of sched.h	2007-02-14 08:09:54 -08:00
8250_pnp.c	[PATCH] add Fujitsu Siemens Tablet PC devices to 8250_pnp.c	2007-03-23 11:01:22 -07:00
8250.c	serial: convert early_uart to earlycon for 8250	2007-07-16 09:05:35 -07:00
8250.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
21285.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
68328serial.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
68328serial.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
68360serial.c	68360serial: remove broken optimisation	2007-07-16 09:05:51 -07:00
amba-pl010.c	[ARM] Fix 4417/1: Serial: Fix AMBA drivers locking	2007-06-05 19:39:49 +01:00
amba-pl011.c	[ARM] 4417/1: Serial: Fix AMBA drivers locking	2007-05-30 14:33:01 +01:00
atmel_serial.c	atmel_serial: fix break handling	2007-07-16 09:05:45 -07:00
atmel_serial.h	[ARM] 4357/1: AT91: Support slower serial baud-rates	2007-05-03 14:12:45 +01:00
bfin_5xx.c	Blackfin serial driver: supporting BF548-EZKIT serial port	2007-07-12 16:43:46 +08:00
clps711x.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
crisv10.c	[PATCH] Char: tty_wakeup cleanup	2007-02-11 10:51:26 -08:00
dz.c	[PATCH] dz: remove struct pt_regs references	2007-03-05 07:57:51 -08:00
dz.h	[PATCH] dz: Fixes to make it work	2006-12-07 08:39:41 -08:00
icom.c	icom: add new sub-device-id to support new adapter	2007-05-17 05:23:05 -07:00
icom.h	do not truncate irq number for icom adapter	2007-04-24 08:23:08 -07:00
imx.c	[ARM] 4328/1: Move i.MX UART regs to driver	2007-05-03 20:24:21 +01:00
ioc3_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ioc4_serial.c	[PATCH] serial: replace kmalloc+memset with kzalloc	2007-02-14 08:09:52 -08:00
ip22zilog.c	Update zilog timeout	2007-07-16 09:05:42 -07:00
ip22zilog.h
Kconfig	zs: move to the serial subsystem	2007-07-18 08:38:22 -07:00
m32r_sio_reg.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
m32r_sio.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
m32r_sio.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
Makefile	zs: move to the serial subsystem	2007-07-18 08:38:22 -07:00
mcfserial.c	[PATCH] m68knommu: fix work queues in mcfserial.c driver	2007-03-06 18:08:38 -08:00
mcfserial.h	Remove obsolete #include <linux/config.h>	2006-06-30 19:25:36 +02:00
mpc52xx_uart.c	[POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console	2007-05-07 20:31:15 +10:00
mpsc.c	serial: clear proper MPSC interrupt cause bits	2007-06-28 11:38:29 -07:00
mux.c	Merge branch 'parisc' from /home/kyle/repos/parisc-2.6.git	2007-02-17 00:18:23 -05:00
netx-serial.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
of_serial.c	[POWERPC] of_serial: add port type checking	2007-07-10 21:53:42 +10:00
pmac_zilog.c	[POWERPC] Rename device_is_compatible to of_device_is_compatible	2007-05-07 20:31:14 +10:00
pmac_zilog.h	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
pnx8xxx_uart.c	[PATCH] PNX8550 UART driver	2007-02-14 08:09:52 -08:00
pxa.c	[ARM] 4304/1: removes the unnecessary bit number from CKENnn_XXXX	2007-04-21 23:14:01 +01:00
s3c2410.c	SPIN_LOCK_UNLOCKED cleanup in drivers/serial	2007-05-08 11:15:11 -07:00
sa1100.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
sb1250-duart.c	sb1250-duart.c: SB1250 DUART serial support	2007-07-17 10:23:03 -07:00
serial_core.c	serial: assert DTR for serial console devices	2007-07-16 09:05:34 -07:00
serial_cs.c	PCMCIA-NETDEV : add new ID of lan&modem multifunction card	2007-07-08 22:16:39 -04:00
serial_ks8695.c	[ARM] 4411/1: KS8695: Another serial driver fix	2007-05-30 13:15:19 +01:00
serial_lh7a40x.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
serial_txx9.c	serial_txx9: zap changelog from source code	2007-05-08 11:15:12 -07:00
sh-sci.c	sh: Preliminary support for the SH-X3 CPU.	2007-06-20 18:27:10 +09:00
sh-sci.h	sh: Preliminary support for the SH-X3 CPU.	2007-06-20 18:27:10 +09:00
sn_console.c	sn_console section mismatch warning	2007-07-16 09:05:53 -07:00
suncore.c	[SPARC]: Linux always started with 9600 8N1	2007-05-29 02:50:07 -07:00
suncore.h
sunhv.c	[SERIAL] SUNHV: Fix jerky console on LDOM guests.	2007-07-16 17:12:00 -07:00
sunsab.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunsab.h
sunsu.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunzilog.c	[SERIAL]: Fix console write locking in sparc drivers.	2007-07-16 04:05:28 -07:00
sunzilog.h	[SERIAL] sunzilog: Interrupt enable before ISR handler installed	2007-05-09 13:49:04 -07:00
uartlite.c	[PATCH] drivers/serial NULL noise removal	2007-02-09 09:14:06 -08:00
v850e_uart.c	[PATCH] tty: switch to ktermios	2006-12-08 08:28:57 -08:00
vr41xx_siu.c	[MIPS] separate platform_device registration for VR41xx serial interface	2007-07-12 17:41:13 +01:00
zs.c	zs: move to the serial subsystem	2007-07-18 08:38:22 -07:00
zs.h	zs: move to the serial subsystem	2007-07-18 08:38:22 -07:00