2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
linux-next/drivers/clk/imx
Linus Torvalds a771151a83 ARM: SoC cleanups for v4.9
The cleanups for v4.9 are a little larger that usual, but thankfully
 that is almost exclusively due to removing a significant number of
 files that have become obsolete after the still ongoing conversion
 of old board files to devicetree.
 
 - for mach-omap2, which is still the largest platform in arch/arm/,
   the conversion to DT is finally complete after the Nokia N900 is
   now fully supported there, along with the omap3 LDP, and we can
   remove those two board files.
   If no regressions are found, another large cleanup for the platform
   will happen as a follow-up, removing dead code and restructuring
   the platform based on being DT-only.
 
 - In mach-imx, similar work is ongoing, but has not come that far.
   This time, we remove the obsolete board file for the i.MX1
   generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now DT-only.
   The remaining board files are for i.MX2 and i.MX3 machines
   based on old ARM926 or ARM1136 cores that should work with DT
   in principle.
 
 - realview has just been converted from board files to DT, and a lot
   of code gets removed in the process. This is the last
   ARM/Keil/Versatile derived platform that was still using board
   files, the other ones being integrator, versatile and vexpress.
   We can probably merge the remaining code into a single directory
   in the near future.
 
 - clps711x had completed the conversion in v4.8, but we accidentally
   left the files in place that should have been deleted then.
 
 Conflicts: two files deleted here have been modified upstream,
 the changes can be discarded.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAV/guBGCrR//JCVInAQJoaQ/+N42zjmqDg6zO2JSs3q793AHskllT7kJo
 2G36Afl3hOZqy2TFF8nq5Iv8/hb45+3bHBIlq+JrOq5Fep3wFVfT0d1HMQ8UG6+K
 jSMikItIZkOJdmjuZLEBzhjUFIEIpIrSuSY1Pej5Sy8zDzxT+n68gVqcm/qxa2w6
 gPThdL69/XDo7JkF9TbYn0nrECey3ps9XnikNITWyQTrvCmlDVtGp6B+Cwi4cyvh
 FfJ690GAJU3/9op+xLomtEt1sli/+xJUdpH0IktfuNrc/2i96NsiUgPbqprIP6C6
 rGRN40tDClYa1viRexZlZdkCd7nH9PC+VCC59FONYiY8WmpwtNPVZ8px4D/rv7AX
 GHDnqeVbzUK/CMxRsQC0bnvQnD/oDqkSkDD7ixzfUh2TQiJASXvuj1vOej5k06Vc
 KFkpjh1dSZkehkUp106F2Obm8Sh7nNoG2olzrlzlza97OuYxAEBungIn95vjYbUj
 IRrTQdKgv3gVVGXzHjH7TMr46MZLk6K4mHjDeuQr/NN8JyPH0uLTy6pjsdXRWCvO
 sIWVhyMohKMU2q5NeBWmY0OtDje93JchRVeKfRaQ3+YysPMUTBK5ZtI5GB9tsM14
 7/GA7MO4FA0MZWW2E/GllQzgreaokUzTxBbhANzcEyjGh9OEx4gYaSF68PRy/HBa
 TlhH1PR3PNg=
 =WaLy
 -----END PGP SIGNATURE-----

Merge tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC cleanups from Arnd Bergmann:
 "The cleanups for v4.9 are a little larger that usual, but thankfully
  that is almost exclusively due to removing a significant number of
  files that have become obsolete after the still ongoing conversion of
  old board files to devicetree.

   - for mach-omap2, which is still the largest platform in arch/arm/,
     the conversion to DT is finally complete after the Nokia N900 is
     now fully supported there, along with the omap3 LDP, and we can
     remove those two board files. If no regressions are found, another
     large cleanup for the platform will happen as a follow-up, removing
     dead code and restructuring the platform based on being DT-only.

   - In mach-imx, similar work is ongoing, but has not come that far.
     This time, we remove the obsolete board file for the i.MX1
     generation, which like i.MX25, i.MX5, i.MX6, and i.MX7 is now
     DT-only. The remaining board files are for i.MX2 and i.MX3 machines
     based on old ARM926 or ARM1136 cores that should work with DT in
     principle.

   - realview has just been converted from board files to DT, and a lot
     of code gets removed in the process. This is the last
     ARM/Keil/Versatile derived platform that was still using board
     files, the other ones being integrator, versatile and vexpress. We
     can probably merge the remaining code into a single directory in
     the near future.

   - clps711x had completed the conversion in v4.8, but we accidentally
     left the files in place that should have been deleted then"

* tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits)
  ARM: select PCI_DOMAINS config from ARCH_MULTIPLATFORM
  ARM: stop *MIGHT_HAVE_PCI* config from being selected redundantly
  ARM: imx: (trivial) fix typo and grammar
  ARM: clps711x: remove extraneous files
  ARM: imx: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP2+: use IS_ENABLED() instead of checking for built-in or module
  ARM: OMAP1: use IS_ENABLED() instead of checking for built-in or module
  ARM: imx: remove platform-mxc_rnga
  ARM: realview: imply device tree boot
  ARM: realview: no need to select SMP_ON_UP explicitly
  ARM: realview: delete the RealView board files
  ARM: imx: no need to select SMP_ON_UP explicitly
  ARM: i.MX: Move SOC_IMX1 into 'Device tree only'
  ARM: i.MX: Remove i.MX1 non-DT support
  ARM: i.MX: Remove i.MX1 Synertronixx SCB9328 board support
  ARM: i.MX: Remove i.MX1 Armadeus APF9328 board support
  ARM: mxs: remove obsolete startup code for TX28
  ARM: i.MX31 iomux: remove duplicates with alternate name
  ARM: i.MX31 iomux: remove plain duplicates
  ARM: OMAP2+: Drop legacy board file for LDP
  ...
2016-10-07 21:16:16 -07:00
..
clk-busy.c clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h 2016-01-29 12:59:50 -08:00
clk-cpu.c clk: imx: clk-cpu: Include "clk.h" header file 2015-06-03 14:49:34 +08:00
clk-fixup-div.c clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h 2016-01-29 12:59:50 -08:00
clk-fixup-mux.c clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h 2016-01-29 12:59:50 -08:00
clk-gate2.c clk: imx: clk-gate2: allow custom gate configuration 2016-03-31 17:01:55 +08:00
clk-gate-exclusive.c clk: move the common clock's to_clk_*(_hw) macros to clk-provider.h 2016-01-29 12:59:50 -08:00
clk-imx1.c ARM: i.MX: Remove i.MX1 non-DT support 2016-08-09 22:47:26 +08:00
clk-imx6q.c clk: imx6: initialize GPU clocks 2016-09-20 16:57:15 -07:00
clk-imx6sl.c clk: imx: fix pll clock parents 2016-06-12 21:21:41 +08:00
clk-imx6sx.c clk: imx: fix pll clock parents 2016-06-12 21:21:41 +08:00
clk-imx6ul.c clk: imx6ul: fix gpt2 clock names 2016-06-16 09:05:55 +08:00
clk-imx7d.c clk: imx7d: Add PLL_AUDIO_TEST_DIV/POST_DIV clocks 2016-08-30 14:58:15 -07:00
clk-imx21.c clk: i.MX: Remove clk.h include 2015-07-20 10:52:49 -07:00
clk-imx25.c clk: imx25: Remove osc clock from driver 2015-11-25 11:49:42 +08:00
clk-imx27.c clk: imx27: add missing of_node_put 2015-10-21 16:16:34 -07:00
clk-imx31.c clk: imx31: add missing of_node_put 2015-10-21 16:16:34 -07:00
clk-imx35.c ARM: clk-imx35: annotate clk enum with number values 2016-09-14 11:28:04 -07:00
clk-imx51-imx53.c clk: imx53: Add clocks configuration 2016-09-20 16:52:06 -07:00
clk-pfd.c clk: i.MX: Remove clk.h include 2015-07-20 10:52:49 -07:00
clk-pllv1.c imx/clk-pllv1: fix wrong do_div() usage 2015-11-30 12:58:35 -08:00
clk-pllv2.c imx/clk-pllv2: fix wrong do_div() usage 2015-11-30 12:58:38 -08:00
clk-pllv3.c clk: imx: refine the powerdown bit of clk-pllv3 2016-06-16 09:05:05 +08:00
clk-vf610.c clk: imx: vf610: Disable automatic clock gating for lpuart in LPSTOP mode 2016-07-08 11:38:17 -07:00
clk.c clk: imx: add common logic to detect early UART usage 2015-09-25 21:58:41 -07:00
clk.h clk: imx: Introduce clk_register_gate2() 2016-08-19 12:53:41 -07:00
Makefile clk: imx: add imx6ul clk tree support 2015-07-14 15:02:13 +08:00