2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-29 23:53:55 +08:00
linux-next/drivers/spi/spi-at91-usart.c
Peter Ujfalusi cef76e5ace
spi: at91-usart: Use dma_request_chan() directly for channel request
dma_request_slave_channel_reason() is:
#define dma_request_slave_channel_reason(dev, name) \
	dma_request_chan(dev, name)

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20191113094256.1108-2-peter.ujfalusi@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2019-11-15 12:13:02 +00:00

706 lines
17 KiB
C

// SPDX-License-Identifier: GPL-2.0
//
// Driver for AT91 USART Controllers as SPI
//
// Copyright (C) 2018 Microchip Technology Inc.
//
// Author: Radu Pirea <radu.pirea@microchip.com>
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/pinctrl/consumer.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
#include <linux/spi/spi.h>
#define US_CR 0x00
#define US_MR 0x04
#define US_IER 0x08
#define US_IDR 0x0C
#define US_CSR 0x14
#define US_RHR 0x18
#define US_THR 0x1C
#define US_BRGR 0x20
#define US_VERSION 0xFC
#define US_CR_RSTRX BIT(2)
#define US_CR_RSTTX BIT(3)
#define US_CR_RXEN BIT(4)
#define US_CR_RXDIS BIT(5)
#define US_CR_TXEN BIT(6)
#define US_CR_TXDIS BIT(7)
#define US_MR_SPI_MASTER 0x0E
#define US_MR_CHRL GENMASK(7, 6)
#define US_MR_CPHA BIT(8)
#define US_MR_CPOL BIT(16)
#define US_MR_CLKO BIT(18)
#define US_MR_WRDBT BIT(20)
#define US_MR_LOOP BIT(15)
#define US_IR_RXRDY BIT(0)
#define US_IR_TXRDY BIT(1)
#define US_IR_OVRE BIT(5)
#define US_BRGR_SIZE BIT(16)
#define US_MIN_CLK_DIV 0x06
#define US_MAX_CLK_DIV BIT(16)
#define US_RESET (US_CR_RSTRX | US_CR_RSTTX)
#define US_DISABLE (US_CR_RXDIS | US_CR_TXDIS)
#define US_ENABLE (US_CR_RXEN | US_CR_TXEN)
#define US_OVRE_RXRDY_IRQS (US_IR_OVRE | US_IR_RXRDY)
#define US_INIT \
(US_MR_SPI_MASTER | US_MR_CHRL | US_MR_CLKO | US_MR_WRDBT)
#define US_DMA_MIN_BYTES 16
#define US_DMA_TIMEOUT (msecs_to_jiffies(1000))
/* Register access macros */
#define at91_usart_spi_readl(port, reg) \
readl_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writel(port, reg, value) \
writel_relaxed((value), (port)->regs + US_##reg)
#define at91_usart_spi_readb(port, reg) \
readb_relaxed((port)->regs + US_##reg)
#define at91_usart_spi_writeb(port, reg, value) \
writeb_relaxed((value), (port)->regs + US_##reg)
struct at91_usart_spi {
struct platform_device *mpdev;
struct spi_transfer *current_transfer;
void __iomem *regs;
struct device *dev;
struct clk *clk;
struct completion xfer_completion;
/*used in interrupt to protect data reading*/
spinlock_t lock;
phys_addr_t phybase;
int irq;
unsigned int current_tx_remaining_bytes;
unsigned int current_rx_remaining_bytes;
u32 spi_clk;
u32 status;
bool xfer_failed;
bool use_dma;
};
static void dma_callback(void *data)
{
struct spi_controller *ctlr = data;
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
aus->current_rx_remaining_bytes = 0;
complete(&aus->xfer_completion);
}
static bool at91_usart_spi_can_dma(struct spi_controller *ctrl,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
return aus->use_dma && xfer->len >= US_DMA_MIN_BYTES;
}
static int at91_usart_spi_configure_dma(struct spi_controller *ctlr,
struct at91_usart_spi *aus)
{
struct dma_slave_config slave_config;
struct device *dev = &aus->mpdev->dev;
phys_addr_t phybase = aus->phybase;
dma_cap_mask_t mask;
int err = 0;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
ctlr->dma_tx = dma_request_chan(dev, "tx");
if (IS_ERR_OR_NULL(ctlr->dma_tx)) {
if (IS_ERR(ctlr->dma_tx)) {
err = PTR_ERR(ctlr->dma_tx);
goto at91_usart_spi_error_clear;
}
dev_dbg(dev,
"DMA TX channel not available, SPI unable to use DMA\n");
err = -EBUSY;
goto at91_usart_spi_error_clear;
}
ctlr->dma_rx = dma_request_chan(dev, "rx");
if (IS_ERR_OR_NULL(ctlr->dma_rx)) {
if (IS_ERR(ctlr->dma_rx)) {
err = PTR_ERR(ctlr->dma_rx);
goto at91_usart_spi_error;
}
dev_dbg(dev,
"DMA RX channel not available, SPI unable to use DMA\n");
err = -EBUSY;
goto at91_usart_spi_error;
}
slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
slave_config.dst_addr = (dma_addr_t)phybase + US_THR;
slave_config.src_addr = (dma_addr_t)phybase + US_RHR;
slave_config.src_maxburst = 1;
slave_config.dst_maxburst = 1;
slave_config.device_fc = false;
slave_config.direction = DMA_DEV_TO_MEM;
if (dmaengine_slave_config(ctlr->dma_rx, &slave_config)) {
dev_err(&ctlr->dev,
"failed to configure rx dma channel\n");
err = -EINVAL;
goto at91_usart_spi_error;
}
slave_config.direction = DMA_MEM_TO_DEV;
if (dmaengine_slave_config(ctlr->dma_tx, &slave_config)) {
dev_err(&ctlr->dev,
"failed to configure tx dma channel\n");
err = -EINVAL;
goto at91_usart_spi_error;
}
aus->use_dma = true;
return 0;
at91_usart_spi_error:
if (!IS_ERR_OR_NULL(ctlr->dma_tx))
dma_release_channel(ctlr->dma_tx);
if (!IS_ERR_OR_NULL(ctlr->dma_rx))
dma_release_channel(ctlr->dma_rx);
ctlr->dma_tx = NULL;
ctlr->dma_rx = NULL;
at91_usart_spi_error_clear:
return err;
}
static void at91_usart_spi_release_dma(struct spi_controller *ctlr)
{
if (ctlr->dma_rx)
dma_release_channel(ctlr->dma_rx);
if (ctlr->dma_tx)
dma_release_channel(ctlr->dma_tx);
}
static void at91_usart_spi_stop_dma(struct spi_controller *ctlr)
{
if (ctlr->dma_rx)
dmaengine_terminate_all(ctlr->dma_rx);
if (ctlr->dma_tx)
dmaengine_terminate_all(ctlr->dma_tx);
}
static int at91_usart_spi_dma_transfer(struct spi_controller *ctlr,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
struct dma_chan *rxchan = ctlr->dma_rx;
struct dma_chan *txchan = ctlr->dma_tx;
struct dma_async_tx_descriptor *rxdesc;
struct dma_async_tx_descriptor *txdesc;
dma_cookie_t cookie;
/* Disable RX interrupt */
at91_usart_spi_writel(aus, IDR, US_IR_RXRDY);
rxdesc = dmaengine_prep_slave_sg(rxchan,
xfer->rx_sg.sgl,
xfer->rx_sg.nents,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!rxdesc)
goto at91_usart_spi_err_dma;
txdesc = dmaengine_prep_slave_sg(txchan,
xfer->tx_sg.sgl,
xfer->tx_sg.nents,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!txdesc)
goto at91_usart_spi_err_dma;
rxdesc->callback = dma_callback;
rxdesc->callback_param = ctlr;
cookie = rxdesc->tx_submit(rxdesc);
if (dma_submit_error(cookie))
goto at91_usart_spi_err_dma;
cookie = txdesc->tx_submit(txdesc);
if (dma_submit_error(cookie))
goto at91_usart_spi_err_dma;
rxchan->device->device_issue_pending(rxchan);
txchan->device->device_issue_pending(txchan);
return 0;
at91_usart_spi_err_dma:
/* Enable RX interrupt if something fails and fallback to PIO */
at91_usart_spi_writel(aus, IER, US_IR_RXRDY);
at91_usart_spi_stop_dma(ctlr);
return -ENOMEM;
}
static unsigned long at91_usart_spi_dma_timeout(struct at91_usart_spi *aus)
{
return wait_for_completion_timeout(&aus->xfer_completion,
US_DMA_TIMEOUT);
}
static inline u32 at91_usart_spi_tx_ready(struct at91_usart_spi *aus)
{
return aus->status & US_IR_TXRDY;
}
static inline u32 at91_usart_spi_rx_ready(struct at91_usart_spi *aus)
{
return aus->status & US_IR_RXRDY;
}
static inline u32 at91_usart_spi_check_overrun(struct at91_usart_spi *aus)
{
return aus->status & US_IR_OVRE;
}
static inline u32 at91_usart_spi_read_status(struct at91_usart_spi *aus)
{
aus->status = at91_usart_spi_readl(aus, CSR);
return aus->status;
}
static inline void at91_usart_spi_tx(struct at91_usart_spi *aus)
{
unsigned int len = aus->current_transfer->len;
unsigned int remaining = aus->current_tx_remaining_bytes;
const u8 *tx_buf = aus->current_transfer->tx_buf;
if (!remaining)
return;
if (at91_usart_spi_tx_ready(aus)) {
at91_usart_spi_writeb(aus, THR, tx_buf[len - remaining]);
aus->current_tx_remaining_bytes--;
}
}
static inline void at91_usart_spi_rx(struct at91_usart_spi *aus)
{
int len = aus->current_transfer->len;
int remaining = aus->current_rx_remaining_bytes;
u8 *rx_buf = aus->current_transfer->rx_buf;
if (!remaining)
return;
rx_buf[len - remaining] = at91_usart_spi_readb(aus, RHR);
aus->current_rx_remaining_bytes--;
}
static inline void
at91_usart_spi_set_xfer_speed(struct at91_usart_spi *aus,
struct spi_transfer *xfer)
{
at91_usart_spi_writel(aus, BRGR,
DIV_ROUND_UP(aus->spi_clk, xfer->speed_hz));
}
static irqreturn_t at91_usart_spi_interrupt(int irq, void *dev_id)
{
struct spi_controller *controller = dev_id;
struct at91_usart_spi *aus = spi_master_get_devdata(controller);
spin_lock(&aus->lock);
at91_usart_spi_read_status(aus);
if (at91_usart_spi_check_overrun(aus)) {
aus->xfer_failed = true;
at91_usart_spi_writel(aus, IDR, US_IR_OVRE | US_IR_RXRDY);
spin_unlock(&aus->lock);
return IRQ_HANDLED;
}
if (at91_usart_spi_rx_ready(aus)) {
at91_usart_spi_rx(aus);
spin_unlock(&aus->lock);
return IRQ_HANDLED;
}
spin_unlock(&aus->lock);
return IRQ_NONE;
}
static int at91_usart_spi_setup(struct spi_device *spi)
{
struct at91_usart_spi *aus = spi_master_get_devdata(spi->controller);
u32 *ausd = spi->controller_state;
unsigned int mr = at91_usart_spi_readl(aus, MR);
if (spi->mode & SPI_CPOL)
mr |= US_MR_CPOL;
else
mr &= ~US_MR_CPOL;
if (spi->mode & SPI_CPHA)
mr |= US_MR_CPHA;
else
mr &= ~US_MR_CPHA;
if (spi->mode & SPI_LOOP)
mr |= US_MR_LOOP;
else
mr &= ~US_MR_LOOP;
if (!ausd) {
ausd = kzalloc(sizeof(*ausd), GFP_KERNEL);
if (!ausd)
return -ENOMEM;
spi->controller_state = ausd;
}
*ausd = mr;
dev_dbg(&spi->dev,
"setup: bpw %u mode 0x%x -> mr %d %08x\n",
spi->bits_per_word, spi->mode, spi->chip_select, mr);
return 0;
}
static int at91_usart_spi_transfer_one(struct spi_controller *ctlr,
struct spi_device *spi,
struct spi_transfer *xfer)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
unsigned long dma_timeout = 0;
int ret = 0;
at91_usart_spi_set_xfer_speed(aus, xfer);
aus->xfer_failed = false;
aus->current_transfer = xfer;
aus->current_tx_remaining_bytes = xfer->len;
aus->current_rx_remaining_bytes = xfer->len;
while ((aus->current_tx_remaining_bytes ||
aus->current_rx_remaining_bytes) && !aus->xfer_failed) {
reinit_completion(&aus->xfer_completion);
if (at91_usart_spi_can_dma(ctlr, spi, xfer) &&
!ret) {
ret = at91_usart_spi_dma_transfer(ctlr, xfer);
if (ret)
continue;
dma_timeout = at91_usart_spi_dma_timeout(aus);
if (WARN_ON(dma_timeout == 0)) {
dev_err(&spi->dev, "DMA transfer timeout\n");
return -EIO;
}
aus->current_tx_remaining_bytes = 0;
} else {
at91_usart_spi_read_status(aus);
at91_usart_spi_tx(aus);
}
cpu_relax();
}
if (aus->xfer_failed) {
dev_err(aus->dev, "Overrun!\n");
return -EIO;
}
return 0;
}
static int at91_usart_spi_prepare_message(struct spi_controller *ctlr,
struct spi_message *message)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
struct spi_device *spi = message->spi;
u32 *ausd = spi->controller_state;
at91_usart_spi_writel(aus, CR, US_ENABLE);
at91_usart_spi_writel(aus, IER, US_OVRE_RXRDY_IRQS);
at91_usart_spi_writel(aus, MR, *ausd);
return 0;
}
static int at91_usart_spi_unprepare_message(struct spi_controller *ctlr,
struct spi_message *message)
{
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
at91_usart_spi_writel(aus, IDR, US_OVRE_RXRDY_IRQS);
return 0;
}
static void at91_usart_spi_cleanup(struct spi_device *spi)
{
struct at91_usart_spi_device *ausd = spi->controller_state;
spi->controller_state = NULL;
kfree(ausd);
}
static void at91_usart_spi_init(struct at91_usart_spi *aus)
{
at91_usart_spi_writel(aus, MR, US_INIT);
at91_usart_spi_writel(aus, CR, US_RESET | US_DISABLE);
}
static int at91_usart_gpio_setup(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.parent->of_node;
int i;
int ret;
int nb;
if (!np)
return -EINVAL;
nb = of_gpio_named_count(np, "cs-gpios");
for (i = 0; i < nb; i++) {
int cs_gpio = of_get_named_gpio(np, "cs-gpios", i);
if (cs_gpio < 0)
return cs_gpio;
if (gpio_is_valid(cs_gpio)) {
ret = devm_gpio_request_one(&pdev->dev, cs_gpio,
GPIOF_DIR_OUT,
dev_name(&pdev->dev));
if (ret)
return ret;
}
}
return 0;
}
static int at91_usart_spi_probe(struct platform_device *pdev)
{
struct resource *regs;
struct spi_controller *controller;
struct at91_usart_spi *aus;
struct clk *clk;
int irq;
int ret;
regs = platform_get_resource(to_platform_device(pdev->dev.parent),
IORESOURCE_MEM, 0);
if (!regs)
return -EINVAL;
irq = platform_get_irq(to_platform_device(pdev->dev.parent), 0);
if (irq < 0)
return irq;
clk = devm_clk_get(pdev->dev.parent, "usart");
if (IS_ERR(clk))
return PTR_ERR(clk);
ret = -ENOMEM;
controller = spi_alloc_master(&pdev->dev, sizeof(*aus));
if (!controller)
goto at91_usart_spi_probe_fail;
ret = at91_usart_gpio_setup(pdev);
if (ret)
goto at91_usart_spi_probe_fail;
controller->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LOOP | SPI_CS_HIGH;
controller->dev.of_node = pdev->dev.parent->of_node;
controller->bits_per_word_mask = SPI_BPW_MASK(8);
controller->setup = at91_usart_spi_setup;
controller->flags = SPI_MASTER_MUST_RX | SPI_MASTER_MUST_TX;
controller->transfer_one = at91_usart_spi_transfer_one;
controller->prepare_message = at91_usart_spi_prepare_message;
controller->unprepare_message = at91_usart_spi_unprepare_message;
controller->can_dma = at91_usart_spi_can_dma;
controller->cleanup = at91_usart_spi_cleanup;
controller->max_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
US_MIN_CLK_DIV);
controller->min_speed_hz = DIV_ROUND_UP(clk_get_rate(clk),
US_MAX_CLK_DIV);
platform_set_drvdata(pdev, controller);
aus = spi_master_get_devdata(controller);
aus->dev = &pdev->dev;
aus->regs = devm_ioremap_resource(&pdev->dev, regs);
if (IS_ERR(aus->regs)) {
ret = PTR_ERR(aus->regs);
goto at91_usart_spi_probe_fail;
}
aus->irq = irq;
aus->clk = clk;
ret = devm_request_irq(&pdev->dev, irq, at91_usart_spi_interrupt, 0,
dev_name(&pdev->dev), controller);
if (ret)
goto at91_usart_spi_probe_fail;
ret = clk_prepare_enable(clk);
if (ret)
goto at91_usart_spi_probe_fail;
aus->spi_clk = clk_get_rate(clk);
at91_usart_spi_init(aus);
aus->phybase = regs->start;
aus->mpdev = to_platform_device(pdev->dev.parent);
ret = at91_usart_spi_configure_dma(controller, aus);
if (ret)
goto at91_usart_fail_dma;
spin_lock_init(&aus->lock);
init_completion(&aus->xfer_completion);
ret = devm_spi_register_master(&pdev->dev, controller);
if (ret)
goto at91_usart_fail_register_master;
dev_info(&pdev->dev,
"AT91 USART SPI Controller version 0x%x at %pa (irq %d)\n",
at91_usart_spi_readl(aus, VERSION),
&regs->start, irq);
return 0;
at91_usart_fail_register_master:
at91_usart_spi_release_dma(controller);
at91_usart_fail_dma:
clk_disable_unprepare(clk);
at91_usart_spi_probe_fail:
spi_master_put(controller);
return ret;
}
__maybe_unused static int at91_usart_spi_runtime_suspend(struct device *dev)
{
struct spi_controller *ctlr = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
clk_disable_unprepare(aus->clk);
pinctrl_pm_select_sleep_state(dev);
return 0;
}
__maybe_unused static int at91_usart_spi_runtime_resume(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
pinctrl_pm_select_default_state(dev);
return clk_prepare_enable(aus->clk);
}
__maybe_unused static int at91_usart_spi_suspend(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
int ret;
ret = spi_controller_suspend(ctrl);
if (ret)
return ret;
if (!pm_runtime_suspended(dev))
at91_usart_spi_runtime_suspend(dev);
return 0;
}
__maybe_unused static int at91_usart_spi_resume(struct device *dev)
{
struct spi_controller *ctrl = dev_get_drvdata(dev);
struct at91_usart_spi *aus = spi_master_get_devdata(ctrl);
int ret;
if (!pm_runtime_suspended(dev)) {
ret = at91_usart_spi_runtime_resume(dev);
if (ret)
return ret;
}
at91_usart_spi_init(aus);
return spi_controller_resume(ctrl);
}
static int at91_usart_spi_remove(struct platform_device *pdev)
{
struct spi_controller *ctlr = platform_get_drvdata(pdev);
struct at91_usart_spi *aus = spi_master_get_devdata(ctlr);
at91_usart_spi_release_dma(ctlr);
clk_disable_unprepare(aus->clk);
return 0;
}
static const struct dev_pm_ops at91_usart_spi_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(at91_usart_spi_suspend, at91_usart_spi_resume)
SET_RUNTIME_PM_OPS(at91_usart_spi_runtime_suspend,
at91_usart_spi_runtime_resume, NULL)
};
static const struct of_device_id at91_usart_spi_dt_ids[] = {
{ .compatible = "microchip,at91sam9g45-usart-spi"},
{ /* sentinel */}
};
MODULE_DEVICE_TABLE(of, at91_usart_spi_dt_ids);
static struct platform_driver at91_usart_spi_driver = {
.driver = {
.name = "at91_usart_spi",
.pm = &at91_usart_spi_pm_ops,
},
.probe = at91_usart_spi_probe,
.remove = at91_usart_spi_remove,
};
module_platform_driver(at91_usart_spi_driver);
MODULE_DESCRIPTION("Microchip AT91 USART SPI Controller driver");
MODULE_AUTHOR("Radu Pirea <radu.pirea@microchip.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:at91_usart_spi");