matthieu castet 3c9666cc18 [PATCH] UEAGLE : add iso support ... This patch adds the support for isochronous pipe. A new module parameter is added to select iso mode. It is set to iso by default because bulk mode doesn't work well at high speed rate (>3 Mbps for upload). We use UDSL_IGNORE_EILSEQ flags because ADI firmware doesn't reply to ISO IN when it has nothing to send [1]. [1] from cypress datasheet : The ISOSEND0 Bit (bit 7 in the USBPAIR Register) is used when the EZ-USB FX chip receives an isochronous IN token while the IN FIFO is empty. If ISOSEND0=0 (the default value), the USB core does not respond to the IN token. If ISOSEND0=1, the USB core sends a zero-length data packet in response to the IN token. The action to take depends on the overall system design. The ISOSEND0 Bit applies to all of the isochronous IN endpoints, IN-8 through IN-15. Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>		2006-01-31 17:23:40 -08:00
..
cxacru.c	[PATCH] USBATM: semaphore to mutex conversion	2006-01-31 17:23:40 -08:00
Kconfig	[PATCH] USB: Eagle and ADI 930 usb adsl modem driver	2006-01-04 13:48:29 -08:00
Makefile	[PATCH] USB: Eagle and ADI 930 usb adsl modem driver	2006-01-04 13:48:29 -08:00
speedtch.c	[PATCH] USBATM: bump version numbers	2006-01-31 17:23:40 -08:00
ueagle-atm.c	[PATCH] UEAGLE : add iso support	2006-01-31 17:23:40 -08:00
usbatm.c	[PATCH] USBATM: semaphore to mutex conversion	2006-01-31 17:23:40 -08:00
usbatm.h	[PATCH] USBATM: semaphore to mutex conversion	2006-01-31 17:23:40 -08:00
xusbatm.c	[PATCH] USBATM: allow isochronous transfer	2006-01-31 17:23:40 -08:00