renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 22:53:55 +08:00
Code
3b00315799
linux-next/drivers/scsi/psi240i.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

685 lines
21 KiB
C
Raw Blame History

/*+M*************************************************************************
* Perceptive Solutions, Inc. PSI-240I device driver proc support for Linux.
*
* Copyright (c) 1997 Perceptive Solutions, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
*
* File Name: psi240i.c
*
* Description: SCSI driver for the PSI240I EIDE interface card.
*
*-M*************************************************************************/
#include <linux/module.h>
#include <linux/blkdev.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/string.h>
#include <linux/ioport.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/proc_fs.h>
#include <linux/spinlock.h>
#include <linux/stat.h>
#include <asm/dma.h>
#include <asm/system.h>
#include <asm/io.h>
#include "scsi.h"
#include <scsi/scsi_host.h>
#include "psi240i.h"
#include "psi_chip.h"
//#define DEBUG 1
#ifdef DEBUG
#define DEB(x) x
#else
#define DEB(x)
#endif
#define MAXBOARDS 6 /* Increase this and the sizes of the arrays below, if you need more. */
#define PORT_DATA 0
#define PORT_ERROR 1
#define PORT_SECTOR_COUNT 2
#define PORT_LBA_0 3
#define PORT_LBA_8 4
#define PORT_LBA_16 5
#define PORT_LBA_24 6
#define PORT_STAT_CMD 7
#define PORT_SEL_FAIL 8
#define PORT_IRQ_STATUS 9
#define PORT_ADDRESS 10
#define PORT_FAIL 11
#define PORT_ALT_STAT 12
typedef struct
{
UCHAR device; // device code
UCHAR byte6; // device select register image
UCHAR spigot; // spigot number
UCHAR expectingIRQ; // flag for expecting and interrupt
USHORT sectors; // number of sectors per track
USHORT heads; // number of heads
USHORT cylinders; // number of cylinders for this device
USHORT spareword; // placeholder
ULONG blocks; // number of blocks on device
} OUR_DEVICE, *POUR_DEVICE;
typedef struct
{
USHORT ports[13];
OUR_DEVICE device[8];
Scsi_Cmnd *pSCmnd;
IDE_STRUCT ide;
ULONG startSector;
USHORT sectorCount;
Scsi_Cmnd *SCpnt;
VOID *buffer;
USHORT expectingIRQ;
} ADAPTER240I, *PADAPTER240I;
#define HOSTDATA(host) ((PADAPTER240I)&host->hostdata)
static struct Scsi_Host *PsiHost[6] = {NULL,}; /* One for each IRQ level (10-15) */
static IDENTIFY_DATA identifyData;
static SETUP ChipSetup;
static USHORT portAddr[6] = {CHIP_ADRS_0, CHIP_ADRS_1, CHIP_ADRS_2, CHIP_ADRS_3, CHIP_ADRS_4, CHIP_ADRS_5};
/****************************************************************
* Name: WriteData :LOCAL
*
* Description: Write data to device.
*
* Parameters: padapter - Pointer adapter data structure.
*
* Returns: TRUE if drive does not assert DRQ in time.
*
****************************************************************/
static int WriteData (PADAPTER240I padapter)
{
ULONG timer;
USHORT *pports = padapter->ports;
timer = jiffies + TIMEOUT_DRQ; // calculate the timeout value
do {
if ( inb_p (pports[PORT_STAT_CMD]) & IDE_STATUS_DRQ )
{
outsw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ide[2] * 256);
return 0;
}
} while ( time_after(timer, jiffies) ); // test for timeout
padapter->ide.ide.ides.cmd = 0; // null out the command byte
return 1;
}
/****************************************************************
* Name: IdeCmd :LOCAL
*
* Description: Process a queued command from the SCSI manager.
*
* Parameters: padapter - Pointer adapter data structure.
*
* Returns: Zero if no error or status register contents on error.
*
****************************************************************/
static UCHAR IdeCmd (PADAPTER240I padapter)
{
ULONG timer;
USHORT *pports = padapter->ports;
UCHAR status;
outb_p (padapter->ide.ide.ides.spigot, pports[PORT_SEL_FAIL]); // select the spigot
outb_p (padapter->ide.ide.ide[6], pports[PORT_LBA_24]); // select the drive
timer = jiffies + TIMEOUT_READY; // calculate the timeout value
do {
status = inb_p (padapter->ports[PORT_STAT_CMD]);
if ( status & IDE_STATUS_DRDY )
{
outb_p (padapter->ide.ide.ide[2], pports[PORT_SECTOR_COUNT]);
outb_p (padapter->ide.ide.ide[3], pports[PORT_LBA_0]);
outb_p (padapter->ide.ide.ide[4], pports[PORT_LBA_8]);
outb_p (padapter->ide.ide.ide[5], pports[PORT_LBA_16]);
padapter->expectingIRQ = 1;
outb_p (padapter->ide.ide.ide[7], pports[PORT_STAT_CMD]);
if ( padapter->ide.ide.ides.cmd == IDE_CMD_WRITE_MULTIPLE )
return (WriteData (padapter));
return 0;
}
} while ( time_after(timer, jiffies) ); // test for timeout
padapter->ide.ide.ides.cmd = 0; // null out the command byte
return status;
}
/****************************************************************
* Name: SetupTransfer :LOCAL
*
* Description: Setup a data transfer command.
*
* Parameters: padapter - Pointer adapter data structure.
* drive - Drive/head register upper nibble only.
*
* Returns: TRUE if no data to transfer.
*
****************************************************************/
static int SetupTransfer (PADAPTER240I padapter, UCHAR drive)
{
if ( padapter->sectorCount )
{
*(ULONG *)padapter->ide.ide.ides.lba = padapter->startSector;
padapter->ide.ide.ide[6] |= drive;
padapter->ide.ide.ides.sectors = ( padapter->sectorCount > SECTORSXFER ) ? SECTORSXFER : padapter->sectorCount;
padapter->sectorCount -= padapter->ide.ide.ides.sectors; // bump the start and count for next xfer
padapter->startSector += padapter->ide.ide.ides.sectors;
return 0;
}
else
{
padapter->ide.ide.ides.cmd = 0; // null out the command byte
padapter->SCpnt = NULL;
return 1;
}
}
/****************************************************************
* Name: DecodeError :LOCAL
*
* Description: Decode and process device errors.
*
* Parameters: pshost - Pointer to host data block.
* status - Status register code.
*
* Returns: The driver status code.
*
****************************************************************/
static ULONG DecodeError (struct Scsi_Host *pshost, UCHAR status)
{
PADAPTER240I padapter = HOSTDATA(pshost);
UCHAR error;
padapter->expectingIRQ = 0;
padapter->SCpnt = NULL;
if ( status & IDE_STATUS_WRITE_FAULT )
{
return DID_PARITY << 16;
}
if ( status & IDE_STATUS_BUSY )
return DID_BUS_BUSY << 16;
error = inb_p (padapter->ports[PORT_ERROR]);
DEB(printk ("\npsi240i error register: %x", error));
switch ( error )
{
case IDE_ERROR_AMNF:
case IDE_ERROR_TKONF:
case IDE_ERROR_ABRT:
case IDE_ERROR_IDFN:
case IDE_ERROR_UNC:
case IDE_ERROR_BBK:
default:
return DID_ERROR << 16;
}
return DID_ERROR << 16;
}
/****************************************************************
* Name: Irq_Handler :LOCAL
*
* Description: Interrupt handler.
*
* Parameters: irq - Hardware IRQ number.
* dev_id -
*
* Returns: TRUE if drive is not ready in time.
*
****************************************************************/
static void Irq_Handler (int irq, void *dev_id)
{
struct Scsi_Host *shost; // Pointer to host data block
PADAPTER240I padapter; // Pointer to adapter control structure
USHORT *pports; // I/O port array
Scsi_Cmnd *SCpnt;
UCHAR status;
int z;
DEB(printk ("\npsi240i received interrupt\n"));
shost = PsiHost[irq - 10];
if ( !shost )
panic ("Splunge!");
padapter = HOSTDATA(shost);
pports = padapter->ports;
SCpnt = padapter->SCpnt;
if ( !padapter->expectingIRQ )
{
DEB(printk ("\npsi240i Unsolicited interrupt\n"));
return;
}
padapter->expectingIRQ = 0;
status = inb_p (padapter->ports[PORT_STAT_CMD]); // read the device status
if ( status & (IDE_STATUS_ERROR | IDE_STATUS_WRITE_FAULT) )
goto irqerror;
DEB(printk ("\npsi240i processing interrupt"));
switch ( padapter->ide.ide.ides.cmd ) // decide how to handle the interrupt
{
case IDE_CMD_READ_MULTIPLE:
if ( status & IDE_STATUS_DRQ )
{
insw (pports[PORT_DATA], padapter->buffer, (USHORT)padapter->ide.ide.ides.sectors * 256);
padapter->buffer += padapter->ide.ide.ides.sectors * 512;
if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) )
{
SCpnt->result = DID_OK << 16;
padapter->SCpnt = NULL;
SCpnt->scsi_done (SCpnt);
return;
}
if ( !(status = IdeCmd (padapter)) )
return;
}
break;
case IDE_CMD_WRITE_MULTIPLE:
padapter->buffer += padapter->ide.ide.ides.sectors * 512;
if ( SetupTransfer (padapter, padapter->ide.ide.ide[6] & 0xF0) )
{
SCpnt->result = DID_OK << 16;
padapter->SCpnt = NULL;
SCpnt->scsi_done (SCpnt);
return;
}
if ( !(status = IdeCmd (padapter)) )
return;
break;
case IDE_COMMAND_IDENTIFY:
{
PINQUIRYDATA pinquiryData = SCpnt->request_buffer;
if ( status & IDE_STATUS_DRQ )
{
insw (pports[PORT_DATA], &identifyData, sizeof (identifyData) >> 1);
memset (pinquiryData, 0, SCpnt->request_bufflen); // Zero INQUIRY data structure.
pinquiryData->DeviceType = 0;
pinquiryData->Versions = 2;
pinquiryData->AdditionalLength = 35 - 4;
// Fill in vendor identification fields.
for ( z = 0; z < 20; z += 2 )
{
pinquiryData->VendorId[z] = ((UCHAR *)identifyData.ModelNumber)[z + 1];
pinquiryData->VendorId[z + 1] = ((UCHAR *)identifyData.ModelNumber)[z];
}
// Initialize unused portion of product id.
for ( z = 0; z < 4; z++ )
pinquiryData->ProductId[12 + z] = ' ';
// Move firmware revision from IDENTIFY data to
// product revision in INQUIRY data.
for ( z = 0; z < 4; z += 2 )
{
pinquiryData->ProductRevisionLevel[z] = ((UCHAR *)identifyData.FirmwareRevision)[z + 1];
pinquiryData->ProductRevisionLevel[z + 1] = ((UCHAR *)identifyData.FirmwareRevision)[z];
}
SCpnt->result = DID_OK << 16;
padapter->SCpnt = NULL;
SCpnt->scsi_done (SCpnt);
return;
}
break;
}
default:
SCpnt->result = DID_OK << 16;
padapter->SCpnt = NULL;
SCpnt->scsi_done (SCpnt);
return;
}
irqerror:;
DEB(printk ("\npsi240i error Device Status: %X\n", status));
SCpnt->result = DecodeError (shost, status);
SCpnt->scsi_done (SCpnt);
}
static irqreturn_t do_Irq_Handler (int irq, void *dev_id)
{
unsigned long flags;
struct Scsi_Host *dev = dev_id;
spin_lock_irqsave(dev->host_lock, flags);
Irq_Handler(irq, dev_id);
spin_unlock_irqrestore(dev->host_lock, flags);
return IRQ_HANDLED;
}
/****************************************************************
* Name: Psi240i_QueueCommand
*
* Description: Process a queued command from the SCSI manager.
*
* Parameters: SCpnt - Pointer to SCSI command structure.
* done - Pointer to done function to call.
*
* Returns: Status code.
*
****************************************************************/
static int Psi240i_QueueCommand (Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
{
UCHAR *cdb = (UCHAR *)SCpnt->cmnd; // Pointer to SCSI CDB
PADAPTER240I padapter = HOSTDATA (SCpnt->device->host); // Pointer to adapter control structure
POUR_DEVICE pdev = &padapter->device [SCpnt->device->id];// Pointer to device information
UCHAR rc; // command return code
SCpnt->scsi_done = done;
padapter->ide.ide.ides.spigot = pdev->spigot;
padapter->buffer = SCpnt->request_buffer;
if (done)
{
if ( !pdev->device )
{
SCpnt->result = DID_BAD_TARGET << 16;
done (SCpnt);
return 0;
}
}
else
{
printk("psi240i_queuecommand: %02X: done can't be NULL\n", *cdb);
return 0;
}
switch ( *cdb )
{
case SCSIOP_INQUIRY: // inquiry CDB
{
padapter->ide.ide.ide[6] = pdev->byte6;
padapter->ide.ide.ides.cmd = IDE_COMMAND_IDENTIFY;
break;
}
case SCSIOP_TEST_UNIT_READY: // test unit ready CDB
SCpnt->result = DID_OK << 16;
done (SCpnt);
return 0;
case SCSIOP_READ_CAPACITY: // read capctiy CDB
{
PREAD_CAPACITY_DATA pdata = (PREAD_CAPACITY_DATA)SCpnt->request_buffer;
pdata->blksiz = 0x20000;
XANY2SCSI ((UCHAR *)&pdata->blks, pdev->blocks);
SCpnt->result = DID_OK << 16;
done (SCpnt);
return 0;
}
case SCSIOP_VERIFY: // verify CDB
*(ULONG *)padapter->ide.ide.ides.lba = XSCSI2LONG (&cdb[2]);
padapter->ide.ide.ide[6] |= pdev->byte6;
padapter->ide.ide.ide[2] = (UCHAR)((USHORT)cdb[8] | ((USHORT)cdb[7] << 8));
padapter->ide.ide.ides.cmd = IDE_COMMAND_VERIFY;
break;
case SCSIOP_READ: // read10 CDB
padapter->startSector = XSCSI2LONG (&cdb[2]);
padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
SetupTransfer (padapter, pdev->byte6);
padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE;
break;
case SCSIOP_READ6: // read6 CDB
padapter->startSector = SCSI2LONG (&cdb[1]);
padapter->sectorCount = cdb[4];
SetupTransfer (padapter, pdev->byte6);
padapter->ide.ide.ides.cmd = IDE_CMD_READ_MULTIPLE;
break;
case SCSIOP_WRITE: // write10 CDB
padapter->startSector = XSCSI2LONG (&cdb[2]);
padapter->sectorCount = (USHORT)cdb[8] | ((USHORT)cdb[7] << 8);
SetupTransfer (padapter, pdev->byte6);
padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE;
break;
case SCSIOP_WRITE6: // write6 CDB
padapter->startSector = SCSI2LONG (&cdb[1]);
padapter->sectorCount = cdb[4];
SetupTransfer (padapter, pdev->byte6);
padapter->ide.ide.ides.cmd = IDE_CMD_WRITE_MULTIPLE;
break;
default:
DEB (printk ("psi240i_queuecommand: Unsupported command %02X\n", *cdb));
SCpnt->result = DID_ERROR << 16;
done (SCpnt);
return 0;
}
padapter->SCpnt = SCpnt; // Save this command data
rc = IdeCmd (padapter);
if ( rc )
{
padapter->expectingIRQ = 0;
DEB (printk ("psi240i_queuecommand: %02X, %02X: Device failed to respond for command\n", *cdb, padapter->ide.ide.ides.cmd));
SCpnt->result = DID_ERROR << 16;
done (SCpnt);
return 0;
}
DEB (printk("psi240i_queuecommand: %02X, %02X now waiting for interrupt ", *cdb, padapter->ide.ide.ides.cmd));
return 0;
}
/***************************************************************************
* Name: ReadChipMemory
*
* Description: Read information from controller memory.
*
* Parameters: psetup - Pointer to memory image of setup information.
* base - base address of memory.
* length - lenght of data space in bytes.
* port - I/O address of data port.
*
* Returns: Nothing.
*
**************************************************************************/
static void ReadChipMemory (void *pdata, USHORT base, USHORT length, USHORT port)
{
USHORT z, zz;
UCHAR *pd = (UCHAR *)pdata;
outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup data port
zz = 0;
while ( zz < length )
{
outw_p (base, port + REG_ADDRESS); // setup address
for ( z = 0; z < 8; z++ )
{
if ( (zz + z) < length )
*pd++ = inb_p (port + z); // read data byte
}
zz += 8;
base += 8;
}
}
/****************************************************************
* Name: Psi240i_Detect
*
* Description: Detect and initialize our boards.
*
* Parameters: tpnt - Pointer to SCSI host template structure.
*
* Returns: Number of adapters found.
*
****************************************************************/
static int Psi240i_Detect (struct scsi_host_template *tpnt)
{
int board;
int count = 0;
int unit;
int z;
USHORT port, port_range = 16;
CHIP_CONFIG_N chipConfig;
CHIP_DEVICE_N chipDevice[8];
struct Scsi_Host *pshost;
for ( board = 0; board < MAXBOARDS; board++ ) // scan for I/O ports
{
pshost = NULL;
port = portAddr[board]; // get base address to test
if ( !request_region (port, port_range, "psi240i") )
continue;
if ( inb_p (port + REG_FAIL) != CHIP_ID ) // do the first test for likley hood that it is us
goto host_init_failure;
outb_p (SEL_NONE, port + REG_SEL_FAIL); // setup EEPROM/RAM access
outw (0, port + REG_ADDRESS); // setup EEPROM address zero
if ( inb_p (port) != 0x55 ) // test 1st byte
goto host_init_failure; // nope
if ( inb_p (port + 1) != 0xAA ) // test 2nd byte
goto host_init_failure; // nope
// at this point our board is found and can be accessed. Now we need to initialize
// our informatation and register with the kernel.
ReadChipMemory (&chipConfig, CHIP_CONFIG, sizeof (chipConfig), port);
ReadChipMemory (&chipDevice, CHIP_DEVICE, sizeof (chipDevice), port);
ReadChipMemory (&ChipSetup, CHIP_EEPROM_DATA, sizeof (ChipSetup), port);
if ( !chipConfig.numDrives ) // if no devices on this board
goto host_init_failure;
pshost = scsi_register (tpnt, sizeof(ADAPTER240I));
if(pshost == NULL)
goto host_init_failure;
PsiHost[chipConfig.irq - 10] = pshost;
pshost->unique_id = port;
pshost->io_port = port;
pshost->n_io_port = 16; /* Number of bytes of I/O space used */
pshost->irq = chipConfig.irq;
for ( z = 0; z < 11; z++ ) // build regester address array
HOSTDATA(pshost)->ports[z] = port + z;
HOSTDATA(pshost)->ports[11] = port + REG_FAIL;
HOSTDATA(pshost)->ports[12] = port + REG_ALT_STAT;
DEB (printk ("\nPorts ="));
DEB (for (z=0;z<13;z++) printk(" %#04X",HOSTDATA(pshost)->ports[z]););
for ( z = 0; z < chipConfig.numDrives; ++z )
{
unit = chipDevice[z].channel & 0x0F;
HOSTDATA(pshost)->device[unit].device = ChipSetup.setupDevice[unit].device;
HOSTDATA(pshost)->device[unit].byte6 = (UCHAR)(((unit & 1) << 4) | 0xE0);
HOSTDATA(pshost)->device[unit].spigot = (UCHAR)(1 << (unit >> 1));
HOSTDATA(pshost)->device[unit].sectors = ChipSetup.setupDevice[unit].sectors;
HOSTDATA(pshost)->device[unit].heads = ChipSetup.setupDevice[unit].heads;
HOSTDATA(pshost)->device[unit].cylinders = ChipSetup.setupDevice[unit].cylinders;
HOSTDATA(pshost)->device[unit].blocks = ChipSetup.setupDevice[unit].blocks;
DEB (printk ("\nHOSTDATA->device = %X", HOSTDATA(pshost)->device[unit].device));
DEB (printk ("\n byte6 = %X", HOSTDATA(pshost)->device[unit].byte6));
DEB (printk ("\n spigot = %X", HOSTDATA(pshost)->device[unit].spigot));
DEB (printk ("\n sectors = %X", HOSTDATA(pshost)->device[unit].sectors));
DEB (printk ("\n heads = %X", HOSTDATA(pshost)->device[unit].heads));
DEB (printk ("\n cylinders = %X", HOSTDATA(pshost)->device[unit].cylinders));
DEB (printk ("\n blocks = %lX", HOSTDATA(pshost)->device[unit].blocks));
}
if ( request_irq (chipConfig.irq, do_Irq_Handler, 0, "psi240i", pshost) == 0 )
{
printk("\nPSI-240I EIDE CONTROLLER: at I/O = %x IRQ = %d\n", port, chipConfig.irq);
printk("(C) 1997 Perceptive Solutions, Inc. All rights reserved\n\n");
count++;
continue;
}
printk ("Unable to allocate IRQ for PSI-240I controller.\n");
host_init_failure:
release_region (port, port_range);
if (pshost)
scsi_unregister (pshost);
}
return count;
}
static int Psi240i_Release(struct Scsi_Host *shost)
{
if (shost->irq)
free_irq(shost->irq, NULL);
if (shost->io_port && shost->n_io_port)
release_region(shost->io_port, shost->n_io_port);
scsi_unregister(shost);
return 0;
}
/****************************************************************
* Name: Psi240i_BiosParam
*
* Description: Process the biosparam request from the SCSI manager to
* return C/H/S data.
*
* Parameters: disk - Pointer to SCSI disk structure.
* dev - Major/minor number from kernel.
* geom - Pointer to integer array to place geometry data.
*
* Returns: zero.
*
****************************************************************/
static int Psi240i_BiosParam (struct scsi_device *sdev, struct block_device *dev,
sector_t capacity, int geom[])
{
POUR_DEVICE pdev;
pdev = &(HOSTDATA(sdev->host)->device[sdev_id(sdev)]);
geom[0] = pdev->heads;
geom[1] = pdev->sectors;
geom[2] = pdev->cylinders;
return 0;
}
MODULE_LICENSE("GPL");
static struct scsi_host_template driver_template = {
.proc_name = "psi240i",
.name = "PSI-240I EIDE Disk Controller",
.detect = Psi240i_Detect,
.release = Psi240i_Release,
.queuecommand = Psi240i_QueueCommand,
.bios_param = Psi240i_BiosParam,
.can_queue = 1,
.this_id = -1,
.sg_tablesize = SG_NONE,
.cmd_per_lun = 1,
.use_clustering = DISABLE_CLUSTERING,
};
#include "scsi_module.c"
View Git Blame Copy Permalink