2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 05:04:00 +08:00
linux-next/drivers/char/rio/daemon.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

335 lines
8.2 KiB
C

/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : daemon.h
** SID : 1.3
** Last Modified : 11/6/98 11:34:09
** Retrieved : 11/6/98 11:34:21
**
** ident @(#)daemon.h 1.3
**
** -----------------------------------------------------------------------------
*/
#ifndef __rio_daemon_h__
#define __rio_daemon_h__
#ifdef SCCS_LABELS
#ifndef lint
static char *_daemon_h_sccs_ = "@(#)daemon.h 1.3";
#endif
#endif
/*
** structures used on /dev/rio
*/
struct Error
{
uint Error;
uint Entry;
uint Other;
};
struct DownLoad
{
char *DataP;
uint Count;
uint ProductCode;
};
/*
** A few constants....
*/
#ifndef MAX_VERSION_LEN
#define MAX_VERSION_LEN 256
#endif
#ifndef MAX_XP_CTRL_LEN
#define MAX_XP_CTRL_LEN 16 /* ALSO IN PORT.H */
#endif
struct PortSetup
{
uint From; /* Set/Clear XP & IXANY Control from this port.... */
uint To; /* .... to this port */
uint XpCps; /* at this speed */
char XpOn[MAX_XP_CTRL_LEN]; /* this is the start string */
char XpOff[MAX_XP_CTRL_LEN]; /* this is the stop string */
uchar IxAny; /* enable/disable IXANY */
uchar IxOn; /* enable/disable IXON */
uchar Lock; /* lock port params */
uchar Store; /* store params across closes */
uchar Drain; /* close only when drained */
};
struct LpbReq
{
uint Host;
uint Link;
struct LPB *LpbP;
};
struct RupReq
{
uint HostNum;
uint RupNum;
struct RUP *RupP;
};
struct PortReq
{
uint SysPort;
struct Port *PortP;
};
struct StreamInfo
{
uint SysPort;
#if 0
queue_t RQueue;
queue_t WQueue;
#else
int RQueue;
int WQueue;
#endif
};
struct HostReq
{
uint HostNum;
struct Host *HostP;
};
struct HostDpRam
{
uint HostNum;
struct DpRam *DpRamP;
};
struct DebugCtrl
{
uint SysPort;
uint Debug;
uint Wait;
};
struct MapInfo
{
uint FirstPort; /* 8 ports, starting from this (tty) number */
uint RtaUnique; /* reside on this RTA (unique number) */
};
struct MapIn
{
uint NumEntries; /* How many port sets are we mapping? */
struct MapInfo *MapInfoP; /* Pointer to (user space) info */
};
struct SendPack
{
unsigned int PortNum;
unsigned char Len;
unsigned char Data[PKT_MAX_DATA_LEN];
};
struct SpecialRupCmd
{
struct PKT Packet;
unsigned short Host;
unsigned short RupNum;
};
struct IdentifyRta
{
ulong RtaUnique;
uchar ID;
};
struct KillNeighbour
{
ulong UniqueNum;
uchar Link;
};
struct rioVersion {
char version[MAX_VERSION_LEN];
char relid[MAX_VERSION_LEN];
int buildLevel;
char buildDate[MAX_VERSION_LEN];
};
/*
** RIOC commands are for the daemon type operations
**
** 09.12.1998 ARG - ESIL 0776 part fix
** Definition for 'RIOC' also appears in rioioctl.h, so we'd better do a
** #ifndef here first.
** rioioctl.h also now has #define 'RIO_QUICK_CHECK' as this ioctl is now
** allowed to be used by customers.
*/
#ifndef RIOC
#define RIOC ('R'<<8)|('i'<<16)|('o'<<24)
#endif
/*
** Boot stuff
*/
#define RIO_GET_TABLE (RIOC | 100)
#define RIO_PUT_TABLE (RIOC | 101)
#define RIO_ASSIGN_RTA (RIOC | 102)
#define RIO_DELETE_RTA (RIOC | 103)
#define RIO_HOST_FOAD (RIOC | 104)
#define RIO_QUICK_CHECK (RIOC | 105)
#define RIO_SIGNALS_ON (RIOC | 106)
#define RIO_SIGNALS_OFF (RIOC | 107)
#define RIO_CHANGE_NAME (RIOC | 108)
#define RIO_DOWNLOAD (RIOC | 109)
#define RIO_GET_LOG (RIOC | 110)
#define RIO_SETUP_PORTS (RIOC | 111)
#define RIO_ALL_MODEM (RIOC | 112)
/*
** card state, debug stuff
*/
#define RIO_NUM_HOSTS (RIOC | 120)
#define RIO_HOST_LPB (RIOC | 121)
#define RIO_HOST_RUP (RIOC | 122)
#define RIO_HOST_PORT (RIOC | 123)
#define RIO_PARMS (RIOC | 124)
#define RIO_HOST_REQ (RIOC | 125)
#define RIO_READ_CONFIG (RIOC | 126)
#define RIO_SET_CONFIG (RIOC | 127)
#define RIO_VERSID (RIOC | 128)
#define RIO_FLAGS (RIOC | 129)
#define RIO_SETDEBUG (RIOC | 130)
#define RIO_GETDEBUG (RIOC | 131)
#define RIO_READ_LEVELS (RIOC | 132)
#define RIO_SET_FAST_BUS (RIOC | 133)
#define RIO_SET_SLOW_BUS (RIOC | 134)
#define RIO_SET_BYTE_MODE (RIOC | 135)
#define RIO_SET_WORD_MODE (RIOC | 136)
#define RIO_STREAM_INFO (RIOC | 137)
#define RIO_START_POLLER (RIOC | 138)
#define RIO_STOP_POLLER (RIOC | 139)
#define RIO_LAST_ERROR (RIOC | 140)
#define RIO_TICK (RIOC | 141)
#define RIO_TOCK (RIOC | 241) /* I did this on purpose, you know. */
#define RIO_SEND_PACKET (RIOC | 142)
#define RIO_SET_BUSY (RIOC | 143)
#define SPECIAL_RUP_CMD (RIOC | 144)
#define RIO_FOAD_RTA (RIOC | 145)
#define RIO_ZOMBIE_RTA (RIOC | 146)
#define RIO_IDENTIFY_RTA (RIOC | 147)
#define RIO_KILL_NEIGHBOUR (RIOC | 148)
#define RIO_DEBUG_MEM (RIOC | 149)
/*
** 150 - 167 used..... See below
*/
#define RIO_GET_PORT_SETUP (RIOC | 168)
#define RIO_RESUME (RIOC | 169)
#define RIO_MESG (RIOC | 170)
#define RIO_NO_MESG (RIOC | 171)
#define RIO_WHAT_MESG (RIOC | 172)
#define RIO_HOST_DPRAM (RIOC | 173)
#define RIO_MAP_B50_TO_50 (RIOC | 174)
#define RIO_MAP_B50_TO_57600 (RIOC | 175)
#define RIO_MAP_B110_TO_110 (RIOC | 176)
#define RIO_MAP_B110_TO_115200 (RIOC | 177)
#define RIO_GET_PORT_PARAMS (RIOC | 178)
#define RIO_SET_PORT_PARAMS (RIOC | 179)
#define RIO_GET_PORT_TTY (RIOC | 180)
#define RIO_SET_PORT_TTY (RIOC | 181)
#define RIO_SYSLOG_ONLY (RIOC | 182)
#define RIO_SYSLOG_CONS (RIOC | 183)
#define RIO_CONS_ONLY (RIOC | 184)
#define RIO_BLOCK_OPENS (RIOC | 185)
/*
** 02.03.1999 ARG - ESIL 0820 fix :
** RIOBootMode is no longer use by the driver, so these ioctls
** are now obsolete :
**
#define RIO_GET_BOOT_MODE (RIOC | 186)
#define RIO_SET_BOOT_MODE (RIOC | 187)
**
*/
#define RIO_MEM_DUMP (RIOC | 189)
#define RIO_READ_REGISTER (RIOC | 190)
#define RIO_GET_MODTYPE (RIOC | 191)
#define RIO_SET_TIMER (RIOC | 192)
#define RIO_READ_CHECK (RIOC | 196)
#define RIO_WAITING_FOR_RESTART (RIOC | 197)
#define RIO_BIND_RTA (RIOC | 198)
#define RIO_GET_BINDINGS (RIOC | 199)
#define RIO_PUT_BINDINGS (RIOC | 200)
#define RIO_MAKE_DEV (RIOC | 201)
#define RIO_MINOR (RIOC | 202)
#define RIO_IDENTIFY_DRIVER (RIOC | 203)
#define RIO_DISPLAY_HOST_CFG (RIOC | 204)
/*
** MAKE_DEV / MINOR stuff
*/
#define RIO_DEV_DIRECT 0x0000
#define RIO_DEV_MODEM 0x0200
#define RIO_DEV_XPRINT 0x0400
#define RIO_DEV_MASK 0x0600
/*
** port management, xprint stuff
*/
#define rIOCN(N) (RIOC|(N))
#define rIOCR(N,T) (RIOC|(N))
#define rIOCW(N,T) (RIOC|(N))
#define RIO_GET_XP_ON rIOCR(150,char[16]) /* start xprint string */
#define RIO_SET_XP_ON rIOCW(151,char[16])
#define RIO_GET_XP_OFF rIOCR(152,char[16]) /* finish xprint string */
#define RIO_SET_XP_OFF rIOCW(153,char[16])
#define RIO_GET_XP_CPS rIOCR(154,int) /* xprint CPS */
#define RIO_SET_XP_CPS rIOCW(155,int)
#define RIO_GET_IXANY rIOCR(156,int) /* ixany allowed? */
#define RIO_SET_IXANY rIOCW(157,int)
#define RIO_SET_IXANY_ON rIOCN(158) /* allow ixany */
#define RIO_SET_IXANY_OFF rIOCN(159) /* disallow ixany */
#define RIO_GET_MODEM rIOCR(160,int) /* port is modem/direct line? */
#define RIO_SET_MODEM rIOCW(161,int)
#define RIO_SET_MODEM_ON rIOCN(162) /* port is a modem */
#define RIO_SET_MODEM_OFF rIOCN(163) /* port is direct */
#define RIO_GET_IXON rIOCR(164,int) /* ixon allowed? */
#define RIO_SET_IXON rIOCW(165,int)
#define RIO_SET_IXON_ON rIOCN(166) /* allow ixon */
#define RIO_SET_IXON_OFF rIOCN(167) /* disallow ixon */
#define RIO_GET_SIVIEW ((('s')<<8) | 106) /* backwards compatible with SI */
#define RIO_IOCTL_UNKNOWN -2
#endif