renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 20:53:53 +08:00
Code
3ac946d12e
linux-next/arch/powerpc/kernel/head_booke.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license 
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

447 lines
17 KiB
C
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __HEAD_BOOKE_H__
#define __HEAD_BOOKE_H__
#include <asm/ptrace.h> /* for STACK_FRAME_REGS_MARKER */
#include <asm/kvm_asm.h>
#include <asm/kvm_booke_hv_asm.h>
/*
* Macros used for common Book-e exception handling
*/
#define SET_IVOR(vector_number, vector_label) \
li r26,vector_label@l; \
mtspr SPRN_IVOR##vector_number,r26; \
sync
#if (THREAD_SHIFT < 15)
#define ALLOC_STACK_FRAME(reg, val) \
addi reg,reg,val
#else
#define ALLOC_STACK_FRAME(reg, val) \
addis reg,reg,val@ha; \
addi reg,reg,val@l
#endif
/*
* Macro used to get to thread save registers.
* Note that entries 0-3 are used for the prolog code, and the remaining
* entries are available for specific exception use in the event a handler
* requires more than 4 scratch registers.
*/
#define THREAD_NORMSAVE(offset) (THREAD_NORMSAVES + (offset * 4))
#define NORMAL_EXCEPTION_PROLOG(intno) \
mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
mfspr r10, SPRN_SPRG_THREAD; \
stw r11, THREAD_NORMSAVE(0)(r10); \
stw r13, THREAD_NORMSAVE(2)(r10); \
mfcr r13; /* save CR in r13 for now */\
mfspr r11, SPRN_SRR1; \
DO_KVM BOOKE_INTERRUPT_##intno SPRN_SRR1; \
andi. r11, r11, MSR_PR; /* check whether user or kernel */\
mr r11, r1; \
beq 1f; \
/* if from user, start at top of this thread's kernel stack */ \
lwz r11, THREAD_INFO-THREAD(r10); \
ALLOC_STACK_FRAME(r11, THREAD_SIZE); \
1 : subi r11, r11, INT_FRAME_SIZE; /* Allocate exception frame */ \
stw r13, _CCR(r11); /* save various registers */ \
stw r12,GPR12(r11); \
stw r9,GPR9(r11); \
mfspr r13, SPRN_SPRG_RSCRATCH0; \
stw r13, GPR10(r11); \
lwz r12, THREAD_NORMSAVE(0)(r10); \
stw r12,GPR11(r11); \
lwz r13, THREAD_NORMSAVE(2)(r10); /* restore r13 */ \
mflr r10; \
stw r10,_LINK(r11); \
mfspr r12,SPRN_SRR0; \
stw r1, GPR1(r11); \
mfspr r9,SPRN_SRR1; \
stw r1, 0(r11); \
mr r1, r11; \
rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
stw r0,GPR0(r11); \
lis r10, STACK_FRAME_REGS_MARKER@ha;/* exception frame marker */ \
addi r10, r10, STACK_FRAME_REGS_MARKER@l; \
stw r10, 8(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
/* To handle the additional exception priority levels on 40x and Book-E
* processors we allocate a stack per additional priority level.
*
* On 40x critical is the only additional level
* On 44x/e500 we have critical and machine check
* On e200 we have critical and debug (machine check occurs via critical)
*
* Additionally we reserve a SPRG for each priority level so we can free up a
* GPR to use as the base for indirect access to the exception stacks. This
* is necessary since the MMU is always on, for Book-E parts, and the stacks
* are offset from KERNELBASE.
*
* There is some space optimization to be had here if desired. However
* to allow for a common kernel with support for debug exceptions either
* going to critical or their own debug level we aren't currently
* providing configurations that micro-optimize space usage.
*/
#define MC_STACK_BASE mcheckirq_ctx
#define CRIT_STACK_BASE critirq_ctx
/* only on e500mc/e200 */
#define DBG_STACK_BASE dbgirq_ctx
#define EXC_LVL_FRAME_OVERHEAD (THREAD_SIZE - INT_FRAME_SIZE - EXC_LVL_SIZE)
#ifdef CONFIG_SMP
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
mfspr r8,SPRN_PIR; \
slwi r8,r8,2; \
addis r8,r8,level##_STACK_BASE@ha; \
lwz r8,level##_STACK_BASE@l(r8); \
addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
#else
#define BOOKE_LOAD_EXC_LEVEL_STACK(level) \
lis r8,level##_STACK_BASE@ha; \
lwz r8,level##_STACK_BASE@l(r8); \
addi r8,r8,EXC_LVL_FRAME_OVERHEAD;
#endif
/*
* Exception prolog for critical/machine check exceptions. This is a
* little different from the normal exception prolog above since a
* critical/machine check exception can potentially occur at any point
* during normal exception processing. Thus we cannot use the same SPRG
* registers as the normal prolog above. Instead we use a portion of the
* critical/machine check exception stack at low physical addresses.
*/
#define EXC_LEVEL_EXCEPTION_PROLOG(exc_level, intno, exc_level_srr0, exc_level_srr1) \
mtspr SPRN_SPRG_WSCRATCH_##exc_level,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(exc_level);/* r8 points to the exc_level stack*/ \
stw r9,GPR9(r8); /* save various registers */\
mfcr r9; /* save CR in r9 for now */\
stw r10,GPR10(r8); \
stw r11,GPR11(r8); \
stw r9,_CCR(r8); /* save CR on stack */\
mfspr r11,exc_level_srr1; /* check whether user or kernel */\
DO_KVM BOOKE_INTERRUPT_##intno exc_level_srr1; \
andi. r11,r11,MSR_PR; \
mfspr r11,SPRN_SPRG_THREAD; /* if from user, start at top of */\
lwz r11,THREAD_INFO-THREAD(r11); /* this thread's kernel stack */\
addi r11,r11,EXC_LVL_FRAME_OVERHEAD; /* allocate stack frame */\
beq 1f; \
/* COMING FROM USER MODE */ \
stw r9,_CCR(r11); /* save CR */\
lwz r10,GPR10(r8); /* copy regs from exception stack */\
lwz r9,GPR9(r8); \
stw r10,GPR10(r11); \
lwz r10,GPR11(r8); \
stw r9,GPR9(r11); \
stw r10,GPR11(r11); \
b 2f; \
/* COMING FROM PRIV MODE */ \
1: lwz r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r11); \
lwz r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r11); \
stw r9,TI_FLAGS-EXC_LVL_FRAME_OVERHEAD(r8); \
stw r10,TI_PREEMPT-EXC_LVL_FRAME_OVERHEAD(r8); \
lwz r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r11); \
stw r9,TI_TASK-EXC_LVL_FRAME_OVERHEAD(r8); \
mr r11,r8; \
2: mfspr r8,SPRN_SPRG_RSCRATCH_##exc_level; \
stw r12,GPR12(r11); /* save various registers */\
mflr r10; \
stw r10,_LINK(r11); \
mfspr r12,SPRN_DEAR; /* save DEAR and ESR in the frame */\
stw r12,_DEAR(r11); /* since they may have had stuff */\
mfspr r9,SPRN_ESR; /* in them at the point where the */\
stw r9,_ESR(r11); /* exception was taken */\
mfspr r12,exc_level_srr0; \
stw r1,GPR1(r11); \
mfspr r9,exc_level_srr1; \
stw r1,0(r11); \
mr r1,r11; \
rlwinm r9,r9,0,14,12; /* clear MSR_WE (necessary?) */\
stw r0,GPR0(r11); \
SAVE_4GPRS(3, r11); \
SAVE_2GPRS(7, r11)
#define CRITICAL_EXCEPTION_PROLOG(intno) \
EXC_LEVEL_EXCEPTION_PROLOG(CRIT, intno, SPRN_CSRR0, SPRN_CSRR1)
#define DEBUG_EXCEPTION_PROLOG \
EXC_LEVEL_EXCEPTION_PROLOG(DBG, DEBUG, SPRN_DSRR0, SPRN_DSRR1)
#define MCHECK_EXCEPTION_PROLOG \
EXC_LEVEL_EXCEPTION_PROLOG(MC, MACHINE_CHECK, \
SPRN_MCSRR0, SPRN_MCSRR1)
/*
* Guest Doorbell -- this is a bit odd in that uses GSRR0/1 despite
* being delivered to the host. This exception can only happen
* inside a KVM guest -- so we just handle up to the DO_KVM rather
* than try to fit this into one of the existing prolog macros.
*/
#define GUEST_DOORBELL_EXCEPTION \
START_EXCEPTION(GuestDoorbell); \
mtspr SPRN_SPRG_WSCRATCH0, r10; /* save one register */ \
mfspr r10, SPRN_SPRG_THREAD; \
stw r11, THREAD_NORMSAVE(0)(r10); \
mfspr r11, SPRN_SRR1; \
stw r13, THREAD_NORMSAVE(2)(r10); \
mfcr r13; /* save CR in r13 for now */\
DO_KVM BOOKE_INTERRUPT_GUEST_DBELL SPRN_GSRR1; \
trap
/*
* Exception vectors.
*/
#define START_EXCEPTION(label) \
.align 5; \
label:
#define EXCEPTION(n, intno, label, hdlr, xfer) \
START_EXCEPTION(label); \
NORMAL_EXCEPTION_PROLOG(intno); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
xfer(n, hdlr)
#define CRITICAL_EXCEPTION(n, intno, label, hdlr) \
START_EXCEPTION(label); \
CRITICAL_EXCEPTION_PROLOG(intno); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
NOCOPY, crit_transfer_to_handler, \
ret_from_crit_exc)
#define MCHECK_EXCEPTION(n, label, hdlr) \
START_EXCEPTION(label); \
MCHECK_EXCEPTION_PROLOG; \
mfspr r5,SPRN_ESR; \
stw r5,_ESR(r11); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \
NOCOPY, mcheck_transfer_to_handler, \
ret_from_mcheck_exc)
#define EXC_XFER_TEMPLATE(hdlr, trap, msr, copyee, tfer, ret) \
li r10,trap; \
stw r10,_TRAP(r11); \
lis r10,msr@h; \
ori r10,r10,msr@l; \
copyee(r10, r9); \
bl tfer; \
.long hdlr; \
.long ret
#define COPY_EE(d, s) rlwimi d,s,0,16,16
#define NOCOPY(d, s)
#define EXC_XFER_STD(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, NOCOPY, transfer_to_handler_full, \
ret_from_except_full)
#define EXC_XFER_LITE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, NOCOPY, transfer_to_handler, \
ret_from_except)
#define EXC_XFER_EE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n, MSR_KERNEL, COPY_EE, transfer_to_handler_full, \
ret_from_except_full)
#define EXC_XFER_EE_LITE(n, hdlr) \
EXC_XFER_TEMPLATE(hdlr, n+1, MSR_KERNEL, COPY_EE, transfer_to_handler, \
ret_from_except)
/* Check for a single step debug exception while in an exception
* handler before state has been saved. This is to catch the case
* where an instruction that we are trying to single step causes
* an exception (eg ITLB/DTLB miss) and thus the first instruction of
* the exception handler generates a single step debug exception.
*
* If we get a debug trap on the first instruction of an exception handler,
* we reset the MSR_DE in the _exception handler's_ MSR (the debug trap is
* a critical exception, so we are using SPRN_CSRR1 to manipulate the MSR).
* The exception handler was handling a non-critical interrupt, so it will
* save (and later restore) the MSR via SPRN_CSRR1, which will still have
* the MSR_DE bit set.
*/
#define DEBUG_DEBUG_EXCEPTION \
START_EXCEPTION(DebugDebug); \
DEBUG_EXCEPTION_PROLOG; \
\
/* \
* If there is a single step or branch-taken exception in an \
* exception entry sequence, it was probably meant to apply to \
* the code where the exception occurred (since exception entry \
* doesn't turn off DE automatically). We simulate the effect \
* of turning off DE on entry to an exception handler by turning \
* off DE in the DSRR1 value and clearing the debug status. \
*/ \
mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
beq+ 2f; \
\
lis r10,interrupt_base@h; /* check if exception in vectors */ \
ori r10,r10,interrupt_base@l; \
cmplw r12,r10; \
blt+ 2f; /* addr below exception vectors */ \
\
lis r10,interrupt_end@h; \
ori r10,r10,interrupt_end@l; \
cmplw r12,r10; \
bgt+ 2f; /* addr above exception vectors */ \
\
/* here it looks like we got an inappropriate debug exception. */ \
1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CDRR1 value */ \
lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
mtspr SPRN_DBSR,r10; \
/* restore state and get out */ \
lwz r10,_CCR(r11); \
lwz r0,GPR0(r11); \
lwz r1,GPR1(r11); \
mtcrf 0x80,r10; \
mtspr SPRN_DSRR0,r12; \
mtspr SPRN_DSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
mtspr SPRN_SPRG_WSCRATCH_DBG,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(DBG); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
mfspr r8,SPRN_SPRG_RSCRATCH_DBG; \
\
PPC_RFDI; \
b .; \
\
/* continue normal handling for a debug exception... */ \
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(DebugException, 0x2008, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, debug_transfer_to_handler, ret_from_debug_exc)
#define DEBUG_CRIT_EXCEPTION \
START_EXCEPTION(DebugCrit); \
CRITICAL_EXCEPTION_PROLOG(DEBUG); \
\
/* \
* If there is a single step or branch-taken exception in an \
* exception entry sequence, it was probably meant to apply to \
* the code where the exception occurred (since exception entry \
* doesn't turn off DE automatically). We simulate the effect \
* of turning off DE on entry to an exception handler by turning \
* off DE in the CSRR1 value and clearing the debug status. \
*/ \
mfspr r10,SPRN_DBSR; /* check single-step/branch taken */ \
andis. r10,r10,(DBSR_IC|DBSR_BT)@h; \
beq+ 2f; \
\
lis r10,interrupt_base@h; /* check if exception in vectors */ \
ori r10,r10,interrupt_base@l; \
cmplw r12,r10; \
blt+ 2f; /* addr below exception vectors */ \
\
lis r10,interrupt_end@h; \
ori r10,r10,interrupt_end@l; \
cmplw r12,r10; \
bgt+ 2f; /* addr above exception vectors */ \
\
/* here it looks like we got an inappropriate debug exception. */ \
1: rlwinm r9,r9,0,~MSR_DE; /* clear DE in the CSRR1 value */ \
lis r10,(DBSR_IC|DBSR_BT)@h; /* clear the IC event */ \
mtspr SPRN_DBSR,r10; \
/* restore state and get out */ \
lwz r10,_CCR(r11); \
lwz r0,GPR0(r11); \
lwz r1,GPR1(r11); \
mtcrf 0x80,r10; \
mtspr SPRN_CSRR0,r12; \
mtspr SPRN_CSRR1,r9; \
lwz r9,GPR9(r11); \
lwz r12,GPR12(r11); \
mtspr SPRN_SPRG_WSCRATCH_CRIT,r8; \
BOOKE_LOAD_EXC_LEVEL_STACK(CRIT); /* r8 points to the debug stack */ \
lwz r10,GPR10(r8); \
lwz r11,GPR11(r8); \
mfspr r8,SPRN_SPRG_RSCRATCH_CRIT; \
\
rfci; \
b .; \
\
/* continue normal handling for a critical exception... */ \
2: mfspr r4,SPRN_DBSR; \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_TEMPLATE(DebugException, 0x2002, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), NOCOPY, crit_transfer_to_handler, ret_from_crit_exc)
#define DATA_STORAGE_EXCEPTION \
START_EXCEPTION(DataStorage) \
NORMAL_EXCEPTION_PROLOG(DATA_STORAGE); \
mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
stw r5,_ESR(r11); \
mfspr r4,SPRN_DEAR; /* Grab the DEAR */ \
EXC_XFER_LITE(0x0300, handle_page_fault)
#define INSTRUCTION_STORAGE_EXCEPTION \
START_EXCEPTION(InstructionStorage) \
NORMAL_EXCEPTION_PROLOG(INST_STORAGE); \
mfspr r5,SPRN_ESR; /* Grab the ESR and save it */ \
stw r5,_ESR(r11); \
mr r4,r12; /* Pass SRR0 as arg2 */ \
li r5,0; /* Pass zero as arg3 */ \
EXC_XFER_LITE(0x0400, handle_page_fault)
#define ALIGNMENT_EXCEPTION \
START_EXCEPTION(Alignment) \
NORMAL_EXCEPTION_PROLOG(ALIGNMENT); \
mfspr r4,SPRN_DEAR; /* Grab the DEAR and save it */ \
stw r4,_DEAR(r11); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_EE(0x0600, alignment_exception)
#define PROGRAM_EXCEPTION \
START_EXCEPTION(Program) \
NORMAL_EXCEPTION_PROLOG(PROGRAM); \
mfspr r4,SPRN_ESR; /* Grab the ESR and save it */ \
stw r4,_ESR(r11); \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_STD(0x0700, program_check_exception)
#define DECREMENTER_EXCEPTION \
START_EXCEPTION(Decrementer) \
NORMAL_EXCEPTION_PROLOG(DECREMENTER); \
lis r0,TSR_DIS@h; /* Setup the DEC interrupt mask */ \
mtspr SPRN_TSR,r0; /* Clear the DEC interrupt */ \
addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_LITE(0x0900, timer_interrupt)
#define FP_UNAVAILABLE_EXCEPTION \
START_EXCEPTION(FloatingPointUnavailable) \
NORMAL_EXCEPTION_PROLOG(FP_UNAVAIL); \
beq 1f; \
bl load_up_fpu; /* if from user, just load it up */ \
b fast_exception_return; \
1: addi r3,r1,STACK_FRAME_OVERHEAD; \
EXC_XFER_EE_LITE(0x800, kernel_fp_unavailable_exception)
#ifndef __ASSEMBLY__
struct exception_regs {
unsigned long mas0;
unsigned long mas1;
unsigned long mas2;
unsigned long mas3;
unsigned long mas6;
unsigned long mas7;
unsigned long srr0;
unsigned long srr1;
unsigned long csrr0;
unsigned long csrr1;
unsigned long dsrr0;
unsigned long dsrr1;
unsigned long saved_ksp_limit;
};
/* ensure this structure is always sized to a multiple of the stack alignment */
#define STACK_EXC_LVL_FRAME_SIZE _ALIGN_UP(sizeof (struct exception_regs), 16)
#endif /* __ASSEMBLY__ */
#endif /* __HEAD_BOOKE_H__ */
View Git Blame Copy Permalink