mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 11:44:01 +08:00
6aa7de0591
Please do not apply this to mainline directly, instead please re-run the coccinelle script shown below and apply its output. For several reasons, it is desirable to use {READ,WRITE}_ONCE() in preference to ACCESS_ONCE(), and new code is expected to use one of the former. So far, there's been no reason to change most existing uses of ACCESS_ONCE(), as these aren't harmful, and changing them results in churn. However, for some features, the read/write distinction is critical to correct operation. To distinguish these cases, separate read/write accessors must be used. This patch migrates (most) remaining ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following coccinelle script: ---- // Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and // WRITE_ONCE() // $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch virtual patch @ depends on patch @ expression E1, E2; @@ - ACCESS_ONCE(E1) = E2 + WRITE_ONCE(E1, E2) @ depends on patch @ expression E; @@ - ACCESS_ONCE(E) + READ_ONCE(E) ---- Signed-off-by: Mark Rutland <mark.rutland@arm.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: davem@davemloft.net Cc: linux-arch@vger.kernel.org Cc: mpe@ellerman.id.au Cc: shuah@kernel.org Cc: snitzer@redhat.com Cc: thor.thayer@linux.intel.com Cc: tj@kernel.org Cc: viro@zeniv.linux.org.uk Cc: will.deacon@arm.com Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
399 lines
11 KiB
C
399 lines
11 KiB
C
/*
|
|
* AM824 format in Audio and Music Data Transmission Protocol (IEC 61883-6)
|
|
*
|
|
* Copyright (c) Clemens Ladisch <clemens@ladisch.de>
|
|
* Copyright (c) 2015 Takashi Sakamoto <o-takashi@sakamocchi.jp>
|
|
*
|
|
* Licensed under the terms of the GNU General Public License, version 2.
|
|
*/
|
|
|
|
#include <linux/slab.h>
|
|
|
|
#include "amdtp-am824.h"
|
|
|
|
#define CIP_FMT_AM 0x10
|
|
|
|
/* "Clock-based rate control mode" is just supported. */
|
|
#define AMDTP_FDF_AM824 0x00
|
|
|
|
/*
|
|
* Nominally 3125 bytes/second, but the MIDI port's clock might be
|
|
* 1% too slow, and the bus clock 100 ppm too fast.
|
|
*/
|
|
#define MIDI_BYTES_PER_SECOND 3093
|
|
|
|
/*
|
|
* Several devices look only at the first eight data blocks.
|
|
* In any case, this is more than enough for the MIDI data rate.
|
|
*/
|
|
#define MAX_MIDI_RX_BLOCKS 8
|
|
|
|
struct amdtp_am824 {
|
|
struct snd_rawmidi_substream *midi[AM824_MAX_CHANNELS_FOR_MIDI * 8];
|
|
int midi_fifo_limit;
|
|
int midi_fifo_used[AM824_MAX_CHANNELS_FOR_MIDI * 8];
|
|
unsigned int pcm_channels;
|
|
unsigned int midi_ports;
|
|
|
|
u8 pcm_positions[AM824_MAX_CHANNELS_FOR_PCM];
|
|
u8 midi_position;
|
|
|
|
unsigned int frame_multiplier;
|
|
};
|
|
|
|
/**
|
|
* amdtp_am824_set_parameters - set stream parameters
|
|
* @s: the AMDTP stream to configure
|
|
* @rate: the sample rate
|
|
* @pcm_channels: the number of PCM samples in each data block, to be encoded
|
|
* as AM824 multi-bit linear audio
|
|
* @midi_ports: the number of MIDI ports (i.e., MPX-MIDI Data Channels)
|
|
* @double_pcm_frames: one data block transfers two PCM frames
|
|
*
|
|
* The parameters must be set before the stream is started, and must not be
|
|
* changed while the stream is running.
|
|
*/
|
|
int amdtp_am824_set_parameters(struct amdtp_stream *s, unsigned int rate,
|
|
unsigned int pcm_channels,
|
|
unsigned int midi_ports,
|
|
bool double_pcm_frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
unsigned int midi_channels;
|
|
unsigned int i;
|
|
int err;
|
|
|
|
if (amdtp_stream_running(s))
|
|
return -EINVAL;
|
|
|
|
if (pcm_channels > AM824_MAX_CHANNELS_FOR_PCM)
|
|
return -EINVAL;
|
|
|
|
midi_channels = DIV_ROUND_UP(midi_ports, 8);
|
|
if (midi_channels > AM824_MAX_CHANNELS_FOR_MIDI)
|
|
return -EINVAL;
|
|
|
|
if (WARN_ON(amdtp_stream_running(s)) ||
|
|
WARN_ON(pcm_channels > AM824_MAX_CHANNELS_FOR_PCM) ||
|
|
WARN_ON(midi_channels > AM824_MAX_CHANNELS_FOR_MIDI))
|
|
return -EINVAL;
|
|
|
|
err = amdtp_stream_set_parameters(s, rate,
|
|
pcm_channels + midi_channels);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
s->fdf = AMDTP_FDF_AM824 | s->sfc;
|
|
|
|
p->pcm_channels = pcm_channels;
|
|
p->midi_ports = midi_ports;
|
|
|
|
/*
|
|
* In IEC 61883-6, one data block represents one event. In ALSA, one
|
|
* event equals to one PCM frame. But Dice has a quirk at higher
|
|
* sampling rate to transfer two PCM frames in one data block.
|
|
*/
|
|
if (double_pcm_frames)
|
|
p->frame_multiplier = 2;
|
|
else
|
|
p->frame_multiplier = 1;
|
|
|
|
/* init the position map for PCM and MIDI channels */
|
|
for (i = 0; i < pcm_channels; i++)
|
|
p->pcm_positions[i] = i;
|
|
p->midi_position = p->pcm_channels;
|
|
|
|
/*
|
|
* We do not know the actual MIDI FIFO size of most devices. Just
|
|
* assume two bytes, i.e., one byte can be received over the bus while
|
|
* the previous one is transmitted over MIDI.
|
|
* (The value here is adjusted for midi_ratelimit_per_packet().)
|
|
*/
|
|
p->midi_fifo_limit = rate - MIDI_BYTES_PER_SECOND * s->syt_interval + 1;
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_set_parameters);
|
|
|
|
/**
|
|
* amdtp_am824_set_pcm_position - set an index of data channel for a channel
|
|
* of PCM frame
|
|
* @s: the AMDTP stream
|
|
* @index: the index of data channel in an data block
|
|
* @position: the channel of PCM frame
|
|
*/
|
|
void amdtp_am824_set_pcm_position(struct amdtp_stream *s, unsigned int index,
|
|
unsigned int position)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
|
|
if (index < p->pcm_channels)
|
|
p->pcm_positions[index] = position;
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_set_pcm_position);
|
|
|
|
/**
|
|
* amdtp_am824_set_midi_position - set a index of data channel for MIDI
|
|
* conformant data channel
|
|
* @s: the AMDTP stream
|
|
* @position: the index of data channel in an data block
|
|
*/
|
|
void amdtp_am824_set_midi_position(struct amdtp_stream *s,
|
|
unsigned int position)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
|
|
p->midi_position = position;
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_set_midi_position);
|
|
|
|
static void write_pcm_s32(struct amdtp_stream *s,
|
|
struct snd_pcm_substream *pcm,
|
|
__be32 *buffer, unsigned int frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
struct snd_pcm_runtime *runtime = pcm->runtime;
|
|
unsigned int channels, remaining_frames, i, c;
|
|
const u32 *src;
|
|
|
|
channels = p->pcm_channels;
|
|
src = (void *)runtime->dma_area +
|
|
frames_to_bytes(runtime, s->pcm_buffer_pointer);
|
|
remaining_frames = runtime->buffer_size - s->pcm_buffer_pointer;
|
|
|
|
for (i = 0; i < frames; ++i) {
|
|
for (c = 0; c < channels; ++c) {
|
|
buffer[p->pcm_positions[c]] =
|
|
cpu_to_be32((*src >> 8) | 0x40000000);
|
|
src++;
|
|
}
|
|
buffer += s->data_block_quadlets;
|
|
if (--remaining_frames == 0)
|
|
src = (void *)runtime->dma_area;
|
|
}
|
|
}
|
|
|
|
static void read_pcm_s32(struct amdtp_stream *s,
|
|
struct snd_pcm_substream *pcm,
|
|
__be32 *buffer, unsigned int frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
struct snd_pcm_runtime *runtime = pcm->runtime;
|
|
unsigned int channels, remaining_frames, i, c;
|
|
u32 *dst;
|
|
|
|
channels = p->pcm_channels;
|
|
dst = (void *)runtime->dma_area +
|
|
frames_to_bytes(runtime, s->pcm_buffer_pointer);
|
|
remaining_frames = runtime->buffer_size - s->pcm_buffer_pointer;
|
|
|
|
for (i = 0; i < frames; ++i) {
|
|
for (c = 0; c < channels; ++c) {
|
|
*dst = be32_to_cpu(buffer[p->pcm_positions[c]]) << 8;
|
|
dst++;
|
|
}
|
|
buffer += s->data_block_quadlets;
|
|
if (--remaining_frames == 0)
|
|
dst = (void *)runtime->dma_area;
|
|
}
|
|
}
|
|
|
|
static void write_pcm_silence(struct amdtp_stream *s,
|
|
__be32 *buffer, unsigned int frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
unsigned int i, c, channels = p->pcm_channels;
|
|
|
|
for (i = 0; i < frames; ++i) {
|
|
for (c = 0; c < channels; ++c)
|
|
buffer[p->pcm_positions[c]] = cpu_to_be32(0x40000000);
|
|
buffer += s->data_block_quadlets;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* amdtp_am824_add_pcm_hw_constraints - add hw constraints for PCM substream
|
|
* @s: the AMDTP stream for AM824 data block, must be initialized.
|
|
* @runtime: the PCM substream runtime
|
|
*
|
|
*/
|
|
int amdtp_am824_add_pcm_hw_constraints(struct amdtp_stream *s,
|
|
struct snd_pcm_runtime *runtime)
|
|
{
|
|
int err;
|
|
|
|
err = amdtp_stream_add_pcm_hw_constraints(s, runtime);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* AM824 in IEC 61883-6 can deliver 24bit data. */
|
|
return snd_pcm_hw_constraint_msbits(runtime, 0, 32, 24);
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_add_pcm_hw_constraints);
|
|
|
|
/**
|
|
* amdtp_am824_midi_trigger - start/stop playback/capture with a MIDI device
|
|
* @s: the AMDTP stream
|
|
* @port: index of MIDI port
|
|
* @midi: the MIDI device to be started, or %NULL to stop the current device
|
|
*
|
|
* Call this function on a running isochronous stream to enable the actual
|
|
* transmission of MIDI data. This function should be called from the MIDI
|
|
* device's .trigger callback.
|
|
*/
|
|
void amdtp_am824_midi_trigger(struct amdtp_stream *s, unsigned int port,
|
|
struct snd_rawmidi_substream *midi)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
|
|
if (port < p->midi_ports)
|
|
WRITE_ONCE(p->midi[port], midi);
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_midi_trigger);
|
|
|
|
/*
|
|
* To avoid sending MIDI bytes at too high a rate, assume that the receiving
|
|
* device has a FIFO, and track how much it is filled. This values increases
|
|
* by one whenever we send one byte in a packet, but the FIFO empties at
|
|
* a constant rate independent of our packet rate. One packet has syt_interval
|
|
* samples, so the number of bytes that empty out of the FIFO, per packet(!),
|
|
* is MIDI_BYTES_PER_SECOND * syt_interval / sample_rate. To avoid storing
|
|
* fractional values, the values in midi_fifo_used[] are measured in bytes
|
|
* multiplied by the sample rate.
|
|
*/
|
|
static bool midi_ratelimit_per_packet(struct amdtp_stream *s, unsigned int port)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
int used;
|
|
|
|
used = p->midi_fifo_used[port];
|
|
if (used == 0) /* common shortcut */
|
|
return true;
|
|
|
|
used -= MIDI_BYTES_PER_SECOND * s->syt_interval;
|
|
used = max(used, 0);
|
|
p->midi_fifo_used[port] = used;
|
|
|
|
return used < p->midi_fifo_limit;
|
|
}
|
|
|
|
static void midi_rate_use_one_byte(struct amdtp_stream *s, unsigned int port)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
|
|
p->midi_fifo_used[port] += amdtp_rate_table[s->sfc];
|
|
}
|
|
|
|
static void write_midi_messages(struct amdtp_stream *s, __be32 *buffer,
|
|
unsigned int frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
unsigned int f, port;
|
|
u8 *b;
|
|
|
|
for (f = 0; f < frames; f++) {
|
|
b = (u8 *)&buffer[p->midi_position];
|
|
|
|
port = (s->data_block_counter + f) % 8;
|
|
if (f < MAX_MIDI_RX_BLOCKS &&
|
|
midi_ratelimit_per_packet(s, port) &&
|
|
p->midi[port] != NULL &&
|
|
snd_rawmidi_transmit(p->midi[port], &b[1], 1) == 1) {
|
|
midi_rate_use_one_byte(s, port);
|
|
b[0] = 0x81;
|
|
} else {
|
|
b[0] = 0x80;
|
|
b[1] = 0;
|
|
}
|
|
b[2] = 0;
|
|
b[3] = 0;
|
|
|
|
buffer += s->data_block_quadlets;
|
|
}
|
|
}
|
|
|
|
static void read_midi_messages(struct amdtp_stream *s,
|
|
__be32 *buffer, unsigned int frames)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
unsigned int f, port;
|
|
int len;
|
|
u8 *b;
|
|
|
|
for (f = 0; f < frames; f++) {
|
|
port = (s->data_block_counter + f) % 8;
|
|
b = (u8 *)&buffer[p->midi_position];
|
|
|
|
len = b[0] - 0x80;
|
|
if ((1 <= len) && (len <= 3) && (p->midi[port]))
|
|
snd_rawmidi_receive(p->midi[port], b + 1, len);
|
|
|
|
buffer += s->data_block_quadlets;
|
|
}
|
|
}
|
|
|
|
static unsigned int process_rx_data_blocks(struct amdtp_stream *s, __be32 *buffer,
|
|
unsigned int data_blocks, unsigned int *syt)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
struct snd_pcm_substream *pcm = READ_ONCE(s->pcm);
|
|
unsigned int pcm_frames;
|
|
|
|
if (pcm) {
|
|
write_pcm_s32(s, pcm, buffer, data_blocks);
|
|
pcm_frames = data_blocks * p->frame_multiplier;
|
|
} else {
|
|
write_pcm_silence(s, buffer, data_blocks);
|
|
pcm_frames = 0;
|
|
}
|
|
|
|
if (p->midi_ports)
|
|
write_midi_messages(s, buffer, data_blocks);
|
|
|
|
return pcm_frames;
|
|
}
|
|
|
|
static unsigned int process_tx_data_blocks(struct amdtp_stream *s, __be32 *buffer,
|
|
unsigned int data_blocks, unsigned int *syt)
|
|
{
|
|
struct amdtp_am824 *p = s->protocol;
|
|
struct snd_pcm_substream *pcm = READ_ONCE(s->pcm);
|
|
unsigned int pcm_frames;
|
|
|
|
if (pcm) {
|
|
read_pcm_s32(s, pcm, buffer, data_blocks);
|
|
pcm_frames = data_blocks * p->frame_multiplier;
|
|
} else {
|
|
pcm_frames = 0;
|
|
}
|
|
|
|
if (p->midi_ports)
|
|
read_midi_messages(s, buffer, data_blocks);
|
|
|
|
return pcm_frames;
|
|
}
|
|
|
|
/**
|
|
* amdtp_am824_init - initialize an AMDTP stream structure to handle AM824
|
|
* data block
|
|
* @s: the AMDTP stream to initialize
|
|
* @unit: the target of the stream
|
|
* @dir: the direction of stream
|
|
* @flags: the packet transmission method to use
|
|
*/
|
|
int amdtp_am824_init(struct amdtp_stream *s, struct fw_unit *unit,
|
|
enum amdtp_stream_direction dir, enum cip_flags flags)
|
|
{
|
|
amdtp_stream_process_data_blocks_t process_data_blocks;
|
|
|
|
if (dir == AMDTP_IN_STREAM)
|
|
process_data_blocks = process_tx_data_blocks;
|
|
else
|
|
process_data_blocks = process_rx_data_blocks;
|
|
|
|
return amdtp_stream_init(s, unit, dir, flags, CIP_FMT_AM,
|
|
process_data_blocks,
|
|
sizeof(struct amdtp_am824));
|
|
}
|
|
EXPORT_SYMBOL_GPL(amdtp_am824_init);
|