2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-26 22:24:09 +08:00
linux-next/sound/soc/sti/uniperif_reader.c
Arnaud Pouliquen 3a0e27d84b ASoC: sti: check return of of_property_read
Add check on of_property_read to return error when
DT required property is not defined.

Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@st.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
2015-09-10 11:11:18 +01:00

367 lines
9.5 KiB
C

/*
* Copyright (C) STMicroelectronics SA 2015
* Authors: Arnaud Pouliquen <arnaud.pouliquen@st.com>
* for STMicroelectronics.
* License terms: GNU General Public License (GPL), version 2
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <sound/soc.h>
#include "uniperif.h"
/*
* Note: snd_pcm_hardware is linked to DMA controller but is declared here to
* integrate unireader capability in term of rate and supported channels
*/
static const struct snd_pcm_hardware uni_reader_pcm_hw = {
.info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID,
.formats = SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_CONTINUOUS,
.rate_min = 8000,
.rate_max = 96000,
.channels_min = 2,
.channels_max = 8,
.periods_min = 2,
.periods_max = 48,
.period_bytes_min = 128,
.period_bytes_max = 64 * PAGE_SIZE,
.buffer_bytes_max = 256 * PAGE_SIZE
};
/*
* uni_reader_irq_handler
* In case of error audio stream is stopped; stop action is protected via PCM
* stream lock to avoid race condition with trigger callback.
*/
static irqreturn_t uni_reader_irq_handler(int irq, void *dev_id)
{
irqreturn_t ret = IRQ_NONE;
struct uniperif *reader = dev_id;
unsigned int status;
if (reader->state == UNIPERIF_STATE_STOPPED) {
/* Unexpected IRQ: do nothing */
dev_warn(reader->dev, "unexpected IRQ ");
return IRQ_HANDLED;
}
/* Get interrupt status & clear them immediately */
status = GET_UNIPERIF_ITS(reader);
SET_UNIPERIF_ITS_BCLR(reader, status);
/* Check for fifo overflow error */
if (unlikely(status & UNIPERIF_ITS_FIFO_ERROR_MASK(reader))) {
dev_err(reader->dev, "FIFO error detected");
snd_pcm_stream_lock(reader->substream);
snd_pcm_stop(reader->substream, SNDRV_PCM_STATE_XRUN);
snd_pcm_stream_unlock(reader->substream);
return IRQ_HANDLED;
}
return ret;
}
static int uni_reader_prepare(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
struct uniperif *reader = priv->dai_data.uni;
struct snd_pcm_runtime *runtime = substream->runtime;
int transfer_size, trigger_limit;
int slot_width;
int count = 10;
/* The reader should be stopped */
if (reader->state != UNIPERIF_STATE_STOPPED) {
dev_err(reader->dev, "%s: invalid reader state %d", __func__,
reader->state);
return -EINVAL;
}
/* Calculate transfer size (in fifo cells and bytes) for frame count */
transfer_size = runtime->channels * UNIPERIF_FIFO_FRAMES;
/* Calculate number of empty cells available before asserting DREQ */
if (reader->ver < SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0)
trigger_limit = UNIPERIF_FIFO_SIZE - transfer_size;
else
/*
* Since SND_ST_UNIPERIF_VERSION_UNI_PLR_TOP_1_0
* FDMA_TRIGGER_LIMIT also controls when the state switches
* from OFF or STANDBY to AUDIO DATA.
*/
trigger_limit = transfer_size;
/* Trigger limit must be an even number */
if ((!trigger_limit % 2) ||
(trigger_limit != 1 && transfer_size % 2) ||
(trigger_limit > UNIPERIF_CONFIG_DMA_TRIG_LIMIT_MASK(reader))) {
dev_err(reader->dev, "invalid trigger limit %d", trigger_limit);
return -EINVAL;
}
SET_UNIPERIF_CONFIG_DMA_TRIG_LIMIT(reader, trigger_limit);
switch (reader->daifmt & SND_SOC_DAIFMT_INV_MASK) {
case SND_SOC_DAIFMT_IB_IF:
case SND_SOC_DAIFMT_NB_IF:
SET_UNIPERIF_I2S_FMT_LR_POL_HIG(reader);
break;
default:
SET_UNIPERIF_I2S_FMT_LR_POL_LOW(reader);
}
/* Force slot width to 32 in I2S mode */
if ((reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK)
== SND_SOC_DAIFMT_I2S) {
slot_width = 32;
} else {
switch (runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
slot_width = 16;
break;
default:
slot_width = 32;
break;
}
}
/* Number of bits per subframe (i.e one channel sample) on input. */
switch (slot_width) {
case 32:
SET_UNIPERIF_I2S_FMT_NBIT_32(reader);
SET_UNIPERIF_I2S_FMT_DATA_SIZE_32(reader);
break;
case 16:
SET_UNIPERIF_I2S_FMT_NBIT_16(reader);
SET_UNIPERIF_I2S_FMT_DATA_SIZE_16(reader);
break;
default:
dev_err(reader->dev, "subframe format not supported");
return -EINVAL;
}
/* Configure data memory format */
switch (runtime->format) {
case SNDRV_PCM_FORMAT_S16_LE:
/* One data word contains two samples */
SET_UNIPERIF_CONFIG_MEM_FMT_16_16(reader);
break;
case SNDRV_PCM_FORMAT_S32_LE:
/*
* Actually "16 bits/0 bits" means "32/28/24/20/18/16 bits
* on the MSB then zeros (if less than 32 bytes)"...
*/
SET_UNIPERIF_CONFIG_MEM_FMT_16_0(reader);
break;
default:
dev_err(reader->dev, "format not supported");
return -EINVAL;
}
switch (reader->daifmt & SND_SOC_DAIFMT_FORMAT_MASK) {
case SND_SOC_DAIFMT_I2S:
SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
SET_UNIPERIF_I2S_FMT_PADDING_I2S_MODE(reader);
break;
case SND_SOC_DAIFMT_LEFT_J:
SET_UNIPERIF_I2S_FMT_ALIGN_LEFT(reader);
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
break;
case SND_SOC_DAIFMT_RIGHT_J:
SET_UNIPERIF_I2S_FMT_ALIGN_RIGHT(reader);
SET_UNIPERIF_I2S_FMT_PADDING_SONY_MODE(reader);
break;
default:
dev_err(reader->dev, "format not supported");
return -EINVAL;
}
SET_UNIPERIF_I2S_FMT_ORDER_MSB(reader);
/* Data clocking (changing) on the rising edge */
SET_UNIPERIF_I2S_FMT_SCLK_EDGE_RISING(reader);
/* Number of channels must be even */
if ((runtime->channels % 2) || (runtime->channels < 2) ||
(runtime->channels > 10)) {
dev_err(reader->dev, "%s: invalid nb of channels", __func__);
return -EINVAL;
}
SET_UNIPERIF_I2S_FMT_NUM_CH(reader, runtime->channels / 2);
/* Clear any pending interrupts */
SET_UNIPERIF_ITS_BCLR(reader, GET_UNIPERIF_ITS(reader));
SET_UNIPERIF_I2S_FMT_NO_OF_SAMPLES_TO_READ(reader, 0);
/* Set the interrupt mask */
SET_UNIPERIF_ITM_BSET_DMA_ERROR(reader);
SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
SET_UNIPERIF_ITM_BSET_MEM_BLK_READ(reader);
/* Enable underflow recovery interrupts */
if (reader->info->underflow_enabled) {
SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_DONE(reader);
SET_UNIPERIF_ITM_BSET_UNDERFLOW_REC_FAILED(reader);
}
/* Reset uniperipheral reader */
SET_UNIPERIF_SOFT_RST_SOFT_RST(reader);
while (GET_UNIPERIF_SOFT_RST_SOFT_RST(reader)) {
udelay(5);
count--;
}
if (!count) {
dev_err(reader->dev, "Failed to reset uniperif");
return -EIO;
}
return 0;
}
static int uni_reader_start(struct uniperif *reader)
{
/* The reader should be stopped */
if (reader->state != UNIPERIF_STATE_STOPPED) {
dev_err(reader->dev, "%s: invalid reader state", __func__);
return -EINVAL;
}
/* Enable reader interrupts (and clear possible stalled ones) */
SET_UNIPERIF_ITS_BCLR_FIFO_ERROR(reader);
SET_UNIPERIF_ITM_BSET_FIFO_ERROR(reader);
/* Launch the reader */
SET_UNIPERIF_CTRL_OPERATION_PCM_DATA(reader);
/* Update state to started */
reader->state = UNIPERIF_STATE_STARTED;
return 0;
}
static int uni_reader_stop(struct uniperif *reader)
{
/* The reader should not be in stopped state */
if (reader->state == UNIPERIF_STATE_STOPPED) {
dev_err(reader->dev, "%s: invalid reader state", __func__);
return -EINVAL;
}
/* Turn the reader off */
SET_UNIPERIF_CTRL_OPERATION_OFF(reader);
/* Disable interrupts */
SET_UNIPERIF_ITM_BCLR(reader, GET_UNIPERIF_ITM(reader));
/* Update state to stopped and return */
reader->state = UNIPERIF_STATE_STOPPED;
return 0;
}
static int uni_reader_trigger(struct snd_pcm_substream *substream,
int cmd, struct snd_soc_dai *dai)
{
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
struct uniperif *reader = priv->dai_data.uni;
switch (cmd) {
case SNDRV_PCM_TRIGGER_START:
return uni_reader_start(reader);
case SNDRV_PCM_TRIGGER_STOP:
return uni_reader_stop(reader);
default:
return -EINVAL;
}
}
static void uni_reader_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
struct sti_uniperiph_data *priv = snd_soc_dai_get_drvdata(dai);
struct uniperif *reader = priv->dai_data.uni;
if (reader->state != UNIPERIF_STATE_STOPPED) {
/* Stop the reader */
uni_reader_stop(reader);
}
}
static int uni_reader_parse_dt(struct platform_device *pdev,
struct uniperif *reader)
{
struct uniperif_info *info;
struct device_node *node = pdev->dev.of_node;
/* Allocate memory for the info structure */
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (!info)
return -ENOMEM;
if (of_property_read_u32(node, "version", &reader->ver) ||
reader->ver == SND_ST_UNIPERIF_VERSION_UNKNOWN) {
dev_err(&pdev->dev, "Unknown uniperipheral version ");
return -EINVAL;
}
/* Save the info structure */
reader->info = info;
return 0;
}
static const struct snd_soc_dai_ops uni_reader_dai_ops = {
.shutdown = uni_reader_shutdown,
.prepare = uni_reader_prepare,
.trigger = uni_reader_trigger,
.hw_params = sti_uniperiph_dai_hw_params,
.set_fmt = sti_uniperiph_dai_set_fmt,
};
int uni_reader_init(struct platform_device *pdev,
struct uniperif *reader)
{
int ret = 0;
reader->dev = &pdev->dev;
reader->state = UNIPERIF_STATE_STOPPED;
reader->hw = &uni_reader_pcm_hw;
reader->dai_ops = &uni_reader_dai_ops;
dev_err(reader->dev, "%s: enter\n", __func__);
ret = uni_reader_parse_dt(pdev, reader);
if (ret < 0) {
dev_err(reader->dev, "Failed to parse DeviceTree");
return ret;
}
ret = devm_request_irq(&pdev->dev, reader->irq,
uni_reader_irq_handler, IRQF_SHARED,
dev_name(&pdev->dev), reader);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to request IRQ");
return -EBUSY;
}
return 0;
}
EXPORT_SYMBOL_GPL(uni_reader_init);