mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
fe5b66c123
This updates the compatible string for a no-name LCD panel to "vot,v220hf01a-t", "ilitek,ili9225". The original bindings [1] were the generic "ilitek,ili9225-2.2in-176x220" because I could not find a datasheet. However, after some more research, I finally found one, so the actual vendor and model name are now known. This previous bindings have not made it to the mainline kernel yet, so this is not breaking backwards compatibility. This is also following the precedence of the ILI9322 bindings [2] by using the pattern "vendor,specific-system-config", "vendor,ip-part"; [1]: https://patchwork.ozlabs.org/patch/839352/ [2]: https://patchwork.ozlabs.org/patch/843576/ Signed-off-by: David Lechner <david@lechnology.com> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Link: https://patchwork.freedesktop.org/patch/msgid/1513881187-3197-3-git-send-email-david@lechnology.com
26 lines
721 B
Plaintext
26 lines
721 B
Plaintext
Ilitek ILI9225 display panels
|
|
|
|
This binding is for display panels using an Ilitek ILI9225 controller in SPI
|
|
mode.
|
|
|
|
Required properties:
|
|
- compatible: "vot,v220hf01a-t", "ilitek,ili9225"
|
|
- rs-gpios: Register select signal
|
|
- reset-gpios: Reset pin
|
|
|
|
The node for this driver must be a child node of a SPI controller, hence
|
|
all mandatory properties described in ../spi/spi-bus.txt must be specified.
|
|
|
|
Optional properties:
|
|
- rotation: panel rotation in degrees counter clockwise (0,90,180,270)
|
|
|
|
Example:
|
|
display@0{
|
|
compatible = "vot,v220hf01a-t", "ilitek,ili9225";
|
|
reg = <0>;
|
|
spi-max-frequency = <12000000>;
|
|
rs-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
|
|
reset-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
|
|
rotation = <270>;
|
|
};
|