mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-26 06:04:14 +08:00
aecdc33e11
Pull networking changes from David Miller: 1) GRE now works over ipv6, from Dmitry Kozlov. 2) Make SCTP more network namespace aware, from Eric Biederman. 3) TEAM driver now works with non-ethernet devices, from Jiri Pirko. 4) Make openvswitch network namespace aware, from Pravin B Shelar. 5) IPV6 NAT implementation, from Patrick McHardy. 6) Server side support for TCP Fast Open, from Jerry Chu and others. 7) Packet BPF filter supports MOD and XOR, from Eric Dumazet and Daniel Borkmann. 8) Increate the loopback default MTU to 64K, from Eric Dumazet. 9) Use a per-task rather than per-socket page fragment allocator for outgoing networking traffic. This benefits processes that have very many mostly idle sockets, which is quite common. From Eric Dumazet. 10) Use up to 32K for page fragment allocations, with fallbacks to smaller sizes when higher order page allocations fail. Benefits are a) less segments for driver to process b) less calls to page allocator c) less waste of space. From Eric Dumazet. 11) Allow GRO to be used on GRE tunnels, from Eric Dumazet. 12) VXLAN device driver, one way to handle VLAN issues such as the limitation of 4096 VLAN IDs yet still have some level of isolation. From Stephen Hemminger. 13) As usual there is a large boatload of driver changes, with the scale perhaps tilted towards the wireless side this time around. Fix up various fairly trivial conflicts, mostly caused by the user namespace changes. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1012 commits) hyperv: Add buffer for extended info after the RNDIS response message. hyperv: Report actual status in receive completion packet hyperv: Remove extra allocated space for recv_pkt_list elements hyperv: Fix page buffer handling in rndis_filter_send_request() hyperv: Fix the missing return value in rndis_filter_set_packet_filter() hyperv: Fix the max_xfer_size in RNDIS initialization vxlan: put UDP socket in correct namespace vxlan: Depend on CONFIG_INET sfc: Fix the reported priorities of different filter types sfc: Remove EFX_FILTER_FLAG_RX_OVERRIDE_IP sfc: Fix loopback self-test with separate_tx_channels=1 sfc: Fix MCDI structure field lookup sfc: Add parentheses around use of bitfield macro arguments sfc: Fix null function pointer in efx_sriov_channel_type vxlan: virtual extensible lan igmp: export symbol ip_mc_leave_group netlink: add attributes to fdb interface tg3: unconditionally select HWMON support when tg3 is enabled. Revert "net: ti cpsw ethernet: allow reading phy interface mode from DT" gre: fix sparse warning ...
253 lines
12 KiB
Makefile
253 lines
12 KiB
Makefile
#
|
|
# kbuild file for firmware/
|
|
#
|
|
|
|
# Create $(fwabs) from $(CONFIG_EXTRA_FIRMWARE_DIR) -- if it doesn't have a
|
|
# leading /, it's relative to $(srctree).
|
|
fwdir := $(subst ",,$(CONFIG_EXTRA_FIRMWARE_DIR))
|
|
fwabs := $(addprefix $(srctree)/,$(filter-out /%,$(fwdir)))$(filter /%,$(fwdir))
|
|
|
|
fw-external-y := $(subst ",,$(CONFIG_EXTRA_FIRMWARE))
|
|
|
|
# There are three cases to care about:
|
|
# 1. Building kernel with CONFIG_FIRMWARE_IN_KERNEL=y -- $(fw-shipped-y) should
|
|
# include the firmware files to include, according to .config
|
|
# 2. 'make modules_install', which will install firmware for modules, and
|
|
# _also_ for the in-kernel drivers when CONFIG_FIRMWARE_IN_KERNEL=n
|
|
# 3. 'make firmware_install', which installs all firmware, unconditionally.
|
|
|
|
# For the former two cases we want $(fw-shipped-y) and $(fw-shipped-m) to be
|
|
# accurate. In the latter case it doesn't matter -- it'll use $(fw-shipped-all).
|
|
# But be aware that the config file might not be included at all.
|
|
|
|
ifdef CONFIG_ACENIC_OMIT_TIGON_I
|
|
acenic-objs := acenic/tg2.bin
|
|
fw-shipped- += acenic/tg1.bin
|
|
else
|
|
acenic-objs := acenic/tg1.bin acenic/tg2.bin
|
|
endif
|
|
fw-shipped-$(CONFIG_ACENIC) += $(acenic-objs)
|
|
fw-shipped-$(CONFIG_ADAPTEC_STARFIRE) += adaptec/starfire_rx.bin \
|
|
adaptec/starfire_tx.bin
|
|
fw-shipped-$(CONFIG_ATARI_DSP56K) += dsp56k/bootstrap.bin
|
|
fw-shipped-$(CONFIG_ATM_AMBASSADOR) += atmsar11.fw
|
|
fw-shipped-$(CONFIG_BNX2X) += bnx2x/bnx2x-e1-6.2.9.0.fw \
|
|
bnx2x/bnx2x-e1h-6.2.9.0.fw \
|
|
bnx2x/bnx2x-e2-6.2.9.0.fw
|
|
fw-shipped-$(CONFIG_BNX2) += bnx2/bnx2-mips-09-6.2.1a.fw \
|
|
bnx2/bnx2-rv2p-09-6.0.17.fw \
|
|
bnx2/bnx2-rv2p-09ax-6.0.17.fw \
|
|
bnx2/bnx2-mips-06-6.2.1.fw \
|
|
bnx2/bnx2-rv2p-06-6.0.15.fw
|
|
fw-shipped-$(CONFIG_CASSINI) += sun/cassini.bin
|
|
fw-shipped-$(CONFIG_CHELSIO_T3) += cxgb3/t3b_psram-1.1.0.bin \
|
|
cxgb3/t3c_psram-1.1.0.bin \
|
|
cxgb3/ael2005_opt_edc.bin \
|
|
cxgb3/ael2005_twx_edc.bin \
|
|
cxgb3/ael2020_twx_edc.bin
|
|
fw-shipped-$(CONFIG_DRM_MGA) += matrox/g200_warp.fw matrox/g400_warp.fw
|
|
fw-shipped-$(CONFIG_DRM_R128) += r128/r128_cce.bin
|
|
fw-shipped-$(CONFIG_DRM_RADEON) += radeon/R100_cp.bin radeon/R200_cp.bin \
|
|
radeon/R300_cp.bin radeon/R420_cp.bin \
|
|
radeon/RS690_cp.bin radeon/RS600_cp.bin \
|
|
radeon/R520_cp.bin \
|
|
radeon/R600_pfp.bin radeon/R600_me.bin \
|
|
radeon/RV610_pfp.bin radeon/RV610_me.bin \
|
|
radeon/RV630_pfp.bin radeon/RV630_me.bin \
|
|
radeon/RV620_pfp.bin radeon/RV620_me.bin \
|
|
radeon/RV635_pfp.bin radeon/RV635_me.bin \
|
|
radeon/RV670_pfp.bin radeon/RV670_me.bin \
|
|
radeon/RS780_pfp.bin radeon/RS780_me.bin \
|
|
radeon/RV770_pfp.bin radeon/RV770_me.bin \
|
|
radeon/RV730_pfp.bin radeon/RV730_me.bin \
|
|
radeon/RV710_pfp.bin radeon/RV710_me.bin
|
|
fw-shipped-$(CONFIG_DVB_AV7110) += av7110/bootcode.bin
|
|
fw-shipped-$(CONFIG_DVB_TTUSB_BUDGET) += ttusb-budget/dspbootcode.bin
|
|
fw-shipped-$(CONFIG_E100) += e100/d101m_ucode.bin e100/d101s_ucode.bin \
|
|
e100/d102e_ucode.bin
|
|
fw-shipped-$(CONFIG_MYRI_SBUS) += myricom/lanai.bin
|
|
fw-shipped-$(CONFIG_PCMCIA_PCNET) += cis/LA-PCM.cis cis/PCMLM28.cis \
|
|
cis/DP83903.cis cis/NE2K.cis \
|
|
cis/tamarack.cis cis/PE-200.cis \
|
|
cis/PE520.cis
|
|
fw-shipped-$(CONFIG_PCMCIA_3C589) += cis/3CXEM556.cis
|
|
fw-shipped-$(CONFIG_PCMCIA_3C574) += cis/3CCFEM556.cis
|
|
fw-shipped-$(CONFIG_SERIAL_8250_CS) += cis/MT5634ZLX.cis cis/RS-COM-2P.cis \
|
|
cis/COMpad2.cis cis/COMpad4.cis \
|
|
cis/SW_555_SER.cis cis/SW_7xx_SER.cis \
|
|
cis/SW_8xx_SER.cis
|
|
fw-shipped-$(CONFIG_PCMCIA_SMC91C92) += ositech/Xilinx7OD.bin
|
|
fw-shipped-$(CONFIG_SCSI_ADVANSYS) += advansys/mcode.bin advansys/38C1600.bin \
|
|
advansys/3550.bin advansys/38C0800.bin
|
|
fw-shipped-$(CONFIG_SCSI_QLOGIC_1280) += qlogic/1040.bin qlogic/1280.bin \
|
|
qlogic/12160.bin
|
|
fw-shipped-$(CONFIG_SCSI_QLOGICPTI) += qlogic/isp1000.bin
|
|
fw-shipped-$(CONFIG_INFINIBAND_QIB) += qlogic/sd7220.fw
|
|
fw-shipped-$(CONFIG_SND_KORG1212) += korg/k1212.dsp
|
|
fw-shipped-$(CONFIG_SND_MAESTRO3) += ess/maestro3_assp_kernel.fw \
|
|
ess/maestro3_assp_minisrc.fw
|
|
fw-shipped-$(CONFIG_SND_SB16_CSP) += sb16/mulaw_main.csp sb16/alaw_main.csp \
|
|
sb16/ima_adpcm_init.csp \
|
|
sb16/ima_adpcm_playback.csp \
|
|
sb16/ima_adpcm_capture.csp
|
|
fw-shipped-$(CONFIG_SND_YMFPCI) += yamaha/ds1_ctrl.fw yamaha/ds1_dsp.fw \
|
|
yamaha/ds1e_ctrl.fw
|
|
fw-shipped-$(CONFIG_SND_WAVEFRONT) += yamaha/yss225_registers.bin
|
|
fw-shipped-$(CONFIG_TEHUTI) += tehuti/bdx.bin
|
|
fw-shipped-$(CONFIG_TIGON3) += tigon/tg3.bin tigon/tg3_tso.bin \
|
|
tigon/tg3_tso5.bin
|
|
fw-shipped-$(CONFIG_TYPHOON) += 3com/typhoon.bin
|
|
fw-shipped-$(CONFIG_USB_DABUSB) += dabusb/firmware.fw dabusb/bitstream.bin
|
|
fw-shipped-$(CONFIG_USB_EMI26) += emi26/loader.fw emi26/firmware.fw \
|
|
emi26/bitstream.fw
|
|
fw-shipped-$(CONFIG_USB_EMI62) += emi62/loader.fw emi62/bitstream.fw \
|
|
emi62/spdif.fw emi62/midi.fw
|
|
fw-shipped-$(CONFIG_USB_KAWETH) += kaweth/new_code.bin kaweth/trigger_code.bin \
|
|
kaweth/new_code_fix.bin \
|
|
kaweth/trigger_code_fix.bin
|
|
ifdef CONFIG_FIRMWARE_IN_KERNEL
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_MPR) += keyspan/mpr.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA18X) += keyspan/usa18x.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19) += keyspan/usa19.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QI) += keyspan/usa19qi.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19QW) += keyspan/usa19qw.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA19W) += keyspan/usa19w.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28) += keyspan/usa28.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XA) += keyspan/usa28xa.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28XB) += keyspan/usa28xb.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA28X) += keyspan/usa28x.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49W) += keyspan/usa49w.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_USA49WLC) += keyspan/usa49wlc.fw
|
|
else
|
|
fw-shipped- += keyspan/mpr.fw keyspan/usa18x.fw keyspan/usa19.fw \
|
|
keyspan/usa19qi.fw keyspan/usa19qw.fw keyspan/usa19w.fw \
|
|
keyspan/usa28.fw keyspan/usa28xa.fw keyspan/usa28xb.fw \
|
|
keyspan/usa28x.fw keyspan/usa49w.fw keyspan/usa49wlc.fw
|
|
endif
|
|
fw-shipped-$(CONFIG_USB_SERIAL_TI) += ti_3410.fw ti_5052.fw \
|
|
mts_cdma.fw mts_gsm.fw mts_edge.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT) += edgeport/boot.fw edgeport/boot2.fw \
|
|
edgeport/down.fw edgeport/down2.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_EDGEPORT_TI) += edgeport/down3.bin
|
|
fw-shipped-$(CONFIG_USB_SERIAL_WHITEHEAT) += whiteheat_loader.fw whiteheat.fw \
|
|
# whiteheat_loader_debug.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_KEYSPAN_PDA) += keyspan_pda/keyspan_pda.fw
|
|
fw-shipped-$(CONFIG_USB_SERIAL_XIRCOM) += keyspan_pda/xircom_pgs.fw
|
|
fw-shipped-$(CONFIG_USB_VICAM) += vicam/firmware.fw
|
|
fw-shipped-$(CONFIG_VIDEO_CPIA2) += cpia2/stv0672_vp4.bin
|
|
fw-shipped-$(CONFIG_YAM) += yam/1200.bin yam/9600.bin
|
|
|
|
fw-shipped-all := $(fw-shipped-y) $(fw-shipped-m) $(fw-shipped-)
|
|
|
|
# Directories which we _might_ need to create, so we have a rule for them.
|
|
firmware-dirs := $(sort $(addprefix $(objtree)/$(obj)/,$(dir $(fw-external-y) $(fw-shipped-all))))
|
|
|
|
quiet_cmd_mkdir = MKDIR $(patsubst $(objtree)/%,%,$@)
|
|
cmd_mkdir = mkdir -p $@
|
|
|
|
quiet_cmd_ihex = IHEX $@
|
|
cmd_ihex = $(OBJCOPY) -Iihex -Obinary $< $@
|
|
|
|
quiet_cmd_ihex2fw = IHEX2FW $@
|
|
cmd_ihex2fw = $(objtree)/$(obj)/ihex2fw $< $@
|
|
|
|
quiet_cmd_h16tofw = H16TOFW $@
|
|
cmd_h16tofw = $(objtree)/$(obj)/ihex2fw -w $< $@
|
|
|
|
quiet_cmd_fwbin = MK_FW $@
|
|
cmd_fwbin = FWNAME="$(patsubst firmware/%.gen.S,%,$@)"; \
|
|
FWSTR="$(subst /,_,$(subst .,_,$(subst -,_,$(patsubst \
|
|
firmware/%.gen.S,%,$@))))"; \
|
|
ASM_WORD=$(if $(CONFIG_64BIT),.quad,.long); \
|
|
ASM_ALIGN=$(if $(CONFIG_64BIT),3,2); \
|
|
PROGBITS=$(if $(CONFIG_ARM),%,@)progbits; \
|
|
echo "/* Generated by firmware/Makefile */" > $@;\
|
|
echo " .section .rodata" >>$@;\
|
|
echo " .p2align $${ASM_ALIGN}" >>$@;\
|
|
echo "_fw_$${FWSTR}_bin:" >>$@;\
|
|
echo " .incbin \"$(2)\"" >>$@;\
|
|
echo "_fw_end:" >>$@;\
|
|
echo " .section .rodata.str,\"aMS\",$${PROGBITS},1" >>$@;\
|
|
echo " .p2align $${ASM_ALIGN}" >>$@;\
|
|
echo "_fw_$${FWSTR}_name:" >>$@;\
|
|
echo " .string \"$$FWNAME\"" >>$@;\
|
|
echo " .section .builtin_fw,\"a\",$${PROGBITS}" >>$@;\
|
|
echo " .p2align $${ASM_ALIGN}" >>$@;\
|
|
echo " $${ASM_WORD} _fw_$${FWSTR}_name" >>$@;\
|
|
echo " $${ASM_WORD} _fw_$${FWSTR}_bin" >>$@;\
|
|
echo " $${ASM_WORD} _fw_end - _fw_$${FWSTR}_bin" >>$@;
|
|
|
|
# One of these files will change, or come into existence, whenever
|
|
# the configuration changes between 32-bit and 64-bit. The .S files
|
|
# need to change when that happens.
|
|
wordsize_deps := $(wildcard include/config/64bit.h include/config/32bit.h \
|
|
include/config/ppc32.h include/config/ppc64.h \
|
|
include/config/superh32.h include/config/superh64.h \
|
|
include/config/x86_32.h include/config/x86_64.h)
|
|
|
|
# Workaround for make < 3.81, where .SECONDEXPANSION doesn't work.
|
|
# It'll end up depending on these targets, so make them a PHONY rule which
|
|
# depends on _all_ the directories in $(firmware-dirs), and it'll work out OK.
|
|
PHONY += $(objtree)/$$(%) $(objtree)/$(obj)/$$(%)
|
|
$(objtree)/$$(%) $(objtree)/$(obj)/$$(%): $(firmware-dirs)
|
|
@true
|
|
|
|
# For the $$(dir %) trick, where we need % to be expanded first.
|
|
.SECONDEXPANSION:
|
|
|
|
$(patsubst %,$(obj)/%.gen.S, $(fw-shipped-y)): %: $(wordsize_deps) \
|
|
| $(objtree)/$$(dir %)
|
|
$(call cmd,fwbin,$(patsubst %.gen.S,%,$@))
|
|
$(patsubst %,$(obj)/%.gen.S, $(fw-external-y)): %: $(wordsize_deps) \
|
|
include/config/extra/firmware/dir.h | $(objtree)/$$(dir %)
|
|
$(call cmd,fwbin,$(fwabs)/$(patsubst $(obj)/%.gen.S,%,$@))
|
|
|
|
# The .o files depend on the binaries directly; the .S files don't.
|
|
$(patsubst %,$(obj)/%.gen.o, $(fw-shipped-y)): %.gen.o: %
|
|
$(patsubst %,$(obj)/%.gen.o, $(fw-external-y)): $(obj)/%.gen.o: $(fwdir)/%
|
|
|
|
# .ihex is used just as a simple way to hold binary files in a source tree
|
|
# where binaries are frowned upon. They are directly converted with objcopy.
|
|
$(obj)/%: $(obj)/%.ihex | $(objtree)/$(obj)/$$(dir %)
|
|
$(call cmd,ihex)
|
|
|
|
# Don't depend on ihex2fw if we're installing and it already exists.
|
|
# Putting it after | in the dependencies doesn't seem sufficient when
|
|
# we're installing after a cross-compile, because ihex2fw has dependencies
|
|
# on stuff like /usr/lib/gcc/ppc64-redhat-linux/4.3.0/include/stddef.h and
|
|
# thus wants to be rebuilt. Which it can't be, if the prebuilt kernel tree
|
|
# is exported read-only for someone to run 'make install'.
|
|
ifeq ($(INSTALL):$(wildcard $(obj)/ihex2fw),install:$(obj)/ihex2fw)
|
|
ihex2fw_dep :=
|
|
else
|
|
ihex2fw_dep := $(obj)/ihex2fw
|
|
endif
|
|
|
|
# .HEX is also Intel HEX, but where the offset and length in each record
|
|
# is actually meaningful, because the firmware has to be loaded in a certain
|
|
# order rather than as a single binary blob. Thus, we convert them into our
|
|
# more compact binary representation of ihex records (<linux/ihex.h>)
|
|
$(obj)/%.fw: $(obj)/%.HEX $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
|
|
$(call cmd,ihex2fw)
|
|
|
|
# .H16 is our own modified form of Intel HEX, with 16-bit length for records.
|
|
$(obj)/%.fw: $(obj)/%.H16 $(ihex2fw_dep) | $(objtree)/$(obj)/$$(dir %)
|
|
$(call cmd,h16tofw)
|
|
|
|
$(firmware-dirs):
|
|
$(call cmd,mkdir)
|
|
|
|
obj-y += $(patsubst %,%.gen.o, $(fw-external-y))
|
|
obj-$(CONFIG_FIRMWARE_IN_KERNEL) += $(patsubst %,%.gen.o, $(fw-shipped-y))
|
|
|
|
# Remove .S files and binaries created from ihex
|
|
# (during 'make clean' .config isn't included so they're all in $(fw-shipped-))
|
|
targets := $(fw-shipped-) $(patsubst $(obj)/%,%, \
|
|
$(shell find $(obj) -name \*.gen.S 2>/dev/null))
|
|
|
|
# Without this, built-in.o won't be created when it's empty, and the
|
|
# final vmlinux link will fail.
|
|
obj-n := dummy
|
|
|
|
hostprogs-y := ihex2fw
|