2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-19 02:34:01 +08:00
linux-next/drivers/mmc/core/sdio_ops.c
Shawn Lin 923dff8737 mmc: sdio: deploy error handling instead of triggering BUG_ON
When using mmc_io_rw_extended, it's intent to avoid null
pointer of card and invalid func number. But actually it
didn't prevent that as the seg_size already use the card.
Currently the wrapper function sdio_io_rw_ext_helper already
use card before calling mmc_io_rw_extended, so we should move
this check to there. As to the func number, it was token from
'(ocr & 0x70000000) >> 28' which should be enough to guarantee
that it won't be larger than 7. But we should prevent the
caller like wifi drivers modify this value. So let's move this
check into sdio_io_rw_ext_helper either.

Also we remove the BUG_ON for mmc_send_io_op_cond since all
possible paths calling this function are protected by checking
the arguments in advance. After deploying these changes, we
could not see any panic within SDIO API even if func drivers
abuse the SDIO func APIs.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26 21:31:15 +02:00

218 lines
4.8 KiB
C

/*
* linux/drivers/mmc/sdio_ops.c
*
* Copyright 2006-2007 Pierre Ossman
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*/
#include <linux/scatterlist.h>
#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>
#include <linux/mmc/sdio.h>
#include "core.h"
#include "sdio_ops.h"
int mmc_send_io_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
{
struct mmc_command cmd = {0};
int i, err = 0;
cmd.opcode = SD_IO_SEND_OP_COND;
cmd.arg = ocr;
cmd.flags = MMC_RSP_SPI_R4 | MMC_RSP_R4 | MMC_CMD_BCR;
for (i = 100; i; i--) {
err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
if (err)
break;
/* if we're just probing, do a single pass */
if (ocr == 0)
break;
/* otherwise wait until reset completes */
if (mmc_host_is_spi(host)) {
/*
* Both R1_SPI_IDLE and MMC_CARD_BUSY indicate
* an initialized card under SPI, but some cards
* (Marvell's) only behave when looking at this
* one.
*/
if (cmd.resp[1] & MMC_CARD_BUSY)
break;
} else {
if (cmd.resp[0] & MMC_CARD_BUSY)
break;
}
err = -ETIMEDOUT;
mmc_delay(10);
}
if (rocr)
*rocr = cmd.resp[mmc_host_is_spi(host) ? 1 : 0];
return err;
}
static int mmc_io_rw_direct_host(struct mmc_host *host, int write, unsigned fn,
unsigned addr, u8 in, u8 *out)
{
struct mmc_command cmd = {0};
int err;
if (fn > 7)
return -EINVAL;
/* sanity check */
if (addr & ~0x1FFFF)
return -EINVAL;
cmd.opcode = SD_IO_RW_DIRECT;
cmd.arg = write ? 0x80000000 : 0x00000000;
cmd.arg |= fn << 28;
cmd.arg |= (write && out) ? 0x08000000 : 0x00000000;
cmd.arg |= addr << 9;
cmd.arg |= in;
cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
return err;
if (mmc_host_is_spi(host)) {
/* host driver already reported errors */
} else {
if (cmd.resp[0] & R5_ERROR)
return -EIO;
if (cmd.resp[0] & R5_FUNCTION_NUMBER)
return -EINVAL;
if (cmd.resp[0] & R5_OUT_OF_RANGE)
return -ERANGE;
}
if (out) {
if (mmc_host_is_spi(host))
*out = (cmd.resp[0] >> 8) & 0xFF;
else
*out = cmd.resp[0] & 0xFF;
}
return 0;
}
int mmc_io_rw_direct(struct mmc_card *card, int write, unsigned fn,
unsigned addr, u8 in, u8 *out)
{
return mmc_io_rw_direct_host(card->host, write, fn, addr, in, out);
}
int mmc_io_rw_extended(struct mmc_card *card, int write, unsigned fn,
unsigned addr, int incr_addr, u8 *buf, unsigned blocks, unsigned blksz)
{
struct mmc_request mrq = {NULL};
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg, *sg_ptr;
struct sg_table sgtable;
unsigned int nents, left_size, i;
unsigned int seg_size = card->host->max_seg_size;
WARN_ON(blksz == 0);
/* sanity check */
if (addr & ~0x1FFFF)
return -EINVAL;
mrq.cmd = &cmd;
mrq.data = &data;
cmd.opcode = SD_IO_RW_EXTENDED;
cmd.arg = write ? 0x80000000 : 0x00000000;
cmd.arg |= fn << 28;
cmd.arg |= incr_addr ? 0x04000000 : 0x00000000;
cmd.arg |= addr << 9;
if (blocks == 0)
cmd.arg |= (blksz == 512) ? 0 : blksz; /* byte mode */
else
cmd.arg |= 0x08000000 | blocks; /* block mode */
cmd.flags = MMC_RSP_SPI_R5 | MMC_RSP_R5 | MMC_CMD_ADTC;
data.blksz = blksz;
/* Code in host drivers/fwk assumes that "blocks" always is >=1 */
data.blocks = blocks ? blocks : 1;
data.flags = write ? MMC_DATA_WRITE : MMC_DATA_READ;
left_size = data.blksz * data.blocks;
nents = (left_size - 1) / seg_size + 1;
if (nents > 1) {
if (sg_alloc_table(&sgtable, nents, GFP_KERNEL))
return -ENOMEM;
data.sg = sgtable.sgl;
data.sg_len = nents;
for_each_sg(data.sg, sg_ptr, data.sg_len, i) {
sg_set_page(sg_ptr, virt_to_page(buf + (i * seg_size)),
min(seg_size, left_size),
offset_in_page(buf + (i * seg_size)));
left_size = left_size - seg_size;
}
} else {
data.sg = &sg;
data.sg_len = 1;
sg_init_one(&sg, buf, left_size);
}
mmc_set_data_timeout(&data, card);
mmc_wait_for_req(card->host, &mrq);
if (nents > 1)
sg_free_table(&sgtable);
if (cmd.error)
return cmd.error;
if (data.error)
return data.error;
if (mmc_host_is_spi(card->host)) {
/* host driver already reported errors */
} else {
if (cmd.resp[0] & R5_ERROR)
return -EIO;
if (cmd.resp[0] & R5_FUNCTION_NUMBER)
return -EINVAL;
if (cmd.resp[0] & R5_OUT_OF_RANGE)
return -ERANGE;
}
return 0;
}
int sdio_reset(struct mmc_host *host)
{
int ret;
u8 abort;
/* SDIO Simplified Specification V2.0, 4.4 Reset for SDIO */
ret = mmc_io_rw_direct_host(host, 0, 0, SDIO_CCCR_ABORT, 0, &abort);
if (ret)
abort = 0x08;
else
abort |= 0x08;
return mmc_io_rw_direct_host(host, 1, 0, SDIO_CCCR_ABORT, abort, NULL);
}