2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/Documentation/devicetree/bindings/i2c/i2c-efm32.txt
Rob Herring 4da722ca19 dt-bindings: Remove "status" from examples
Pretty much any node can have a status property, so it doesn't need to
be in examples.

Converted with the following command and removed examples with SoC and
board specific splits:

git grep -l -E 'status.*=.*' Documentation/devicetree/ | xargs sed -i -E '/\sstatus.*=.*"(disabled|ok|okay)/d'

Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Rob Herring <robh@kernel.org>
2017-09-05 10:03:06 -05:00

34 lines
793 B
Plaintext

* Energymicro efm32 i2c controller
Required properties :
- reg : Offset and length of the register set for the device
- compatible : should be "energymicro,efm32-i2c"
- interrupts : the interrupt number
- clocks : reference to the module clock
Recommended properties :
- clock-frequency : maximal I2C bus clock frequency in Hz.
- energymicro,location : Decides the location of the USART I/O pins.
Allowed range : [0 .. 6]
Example:
i2c0: i2c@4000a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "energymicro,efm32-i2c";
reg = <0x4000a000 0x400>;
interrupts = <9>;
clocks = <&cmu clk_HFPERCLKI2C0>;
clock-frequency = <100000>;
energymicro,location = <3>;
eeprom@50 {
compatible = "microchip,24c02";
reg = <0x50>;
pagesize = <16>;
};
};