mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 04:34:11 +08:00
59a0ea5091
In case of QE we can use brg-frequency (which is qeclk/2). Thus no need to divide sysclk in the spi_mpc83xx. This patch also adds code to use get_brgfreq() on QE chips. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
550 lines
14 KiB
C
550 lines
14 KiB
C
/*
|
|
* MPC83xx SPI controller driver.
|
|
*
|
|
* Maintainer: Kumar Gala
|
|
*
|
|
* Copyright (C) 2006 Polycom, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/types.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fsl_devices.h>
|
|
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
|
|
/* SPI Controller registers */
|
|
struct mpc83xx_spi_reg {
|
|
u8 res1[0x20];
|
|
__be32 mode;
|
|
__be32 event;
|
|
__be32 mask;
|
|
__be32 command;
|
|
__be32 transmit;
|
|
__be32 receive;
|
|
};
|
|
|
|
/* SPI Controller mode register definitions */
|
|
#define SPMODE_LOOP (1 << 30)
|
|
#define SPMODE_CI_INACTIVEHIGH (1 << 29)
|
|
#define SPMODE_CP_BEGIN_EDGECLK (1 << 28)
|
|
#define SPMODE_DIV16 (1 << 27)
|
|
#define SPMODE_REV (1 << 26)
|
|
#define SPMODE_MS (1 << 25)
|
|
#define SPMODE_ENABLE (1 << 24)
|
|
#define SPMODE_LEN(x) ((x) << 20)
|
|
#define SPMODE_PM(x) ((x) << 16)
|
|
#define SPMODE_OP (1 << 14)
|
|
|
|
/*
|
|
* Default for SPI Mode:
|
|
* SPI MODE 0 (inactive low, phase middle, MSB, 8-bit length, slow clk
|
|
*/
|
|
#define SPMODE_INIT_VAL (SPMODE_CI_INACTIVEHIGH | SPMODE_DIV16 | SPMODE_REV | \
|
|
SPMODE_MS | SPMODE_LEN(7) | SPMODE_PM(0xf))
|
|
|
|
/* SPIE register values */
|
|
#define SPIE_NE 0x00000200 /* Not empty */
|
|
#define SPIE_NF 0x00000100 /* Not full */
|
|
|
|
/* SPIM register values */
|
|
#define SPIM_NE 0x00000200 /* Not empty */
|
|
#define SPIM_NF 0x00000100 /* Not full */
|
|
|
|
/* SPI Controller driver's private data. */
|
|
struct mpc83xx_spi {
|
|
/* bitbang has to be first */
|
|
struct spi_bitbang bitbang;
|
|
struct completion done;
|
|
|
|
struct mpc83xx_spi_reg __iomem *base;
|
|
|
|
/* rx & tx bufs from the spi_transfer */
|
|
const void *tx;
|
|
void *rx;
|
|
|
|
/* functions to deal with different sized buffers */
|
|
void (*get_rx) (u32 rx_data, struct mpc83xx_spi *);
|
|
u32(*get_tx) (struct mpc83xx_spi *);
|
|
|
|
unsigned int count;
|
|
u32 irq;
|
|
|
|
unsigned nsecs; /* (clock cycle time)/2 */
|
|
|
|
u32 spibrg; /* SPIBRG input clock */
|
|
u32 rx_shift; /* RX data reg shift when in qe mode */
|
|
u32 tx_shift; /* TX data reg shift when in qe mode */
|
|
|
|
bool qe_mode;
|
|
|
|
void (*activate_cs) (u8 cs, u8 polarity);
|
|
void (*deactivate_cs) (u8 cs, u8 polarity);
|
|
};
|
|
|
|
static inline void mpc83xx_spi_write_reg(__be32 __iomem * reg, u32 val)
|
|
{
|
|
out_be32(reg, val);
|
|
}
|
|
|
|
static inline u32 mpc83xx_spi_read_reg(__be32 __iomem * reg)
|
|
{
|
|
return in_be32(reg);
|
|
}
|
|
|
|
#define MPC83XX_SPI_RX_BUF(type) \
|
|
void mpc83xx_spi_rx_buf_##type(u32 data, struct mpc83xx_spi *mpc83xx_spi) \
|
|
{ \
|
|
type * rx = mpc83xx_spi->rx; \
|
|
*rx++ = (type)(data >> mpc83xx_spi->rx_shift); \
|
|
mpc83xx_spi->rx = rx; \
|
|
}
|
|
|
|
#define MPC83XX_SPI_TX_BUF(type) \
|
|
u32 mpc83xx_spi_tx_buf_##type(struct mpc83xx_spi *mpc83xx_spi) \
|
|
{ \
|
|
u32 data; \
|
|
const type * tx = mpc83xx_spi->tx; \
|
|
if (!tx) \
|
|
return 0; \
|
|
data = *tx++ << mpc83xx_spi->tx_shift; \
|
|
mpc83xx_spi->tx = tx; \
|
|
return data; \
|
|
}
|
|
|
|
MPC83XX_SPI_RX_BUF(u8)
|
|
MPC83XX_SPI_RX_BUF(u16)
|
|
MPC83XX_SPI_RX_BUF(u32)
|
|
MPC83XX_SPI_TX_BUF(u8)
|
|
MPC83XX_SPI_TX_BUF(u16)
|
|
MPC83XX_SPI_TX_BUF(u32)
|
|
|
|
static void mpc83xx_spi_chipselect(struct spi_device *spi, int value)
|
|
{
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
u8 pol = spi->mode & SPI_CS_HIGH ? 1 : 0;
|
|
|
|
mpc83xx_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if (value == BITBANG_CS_INACTIVE) {
|
|
if (mpc83xx_spi->deactivate_cs)
|
|
mpc83xx_spi->deactivate_cs(spi->chip_select, pol);
|
|
}
|
|
|
|
if (value == BITBANG_CS_ACTIVE) {
|
|
u32 regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
|
|
u32 len = spi->bits_per_word;
|
|
u8 pm;
|
|
|
|
if (len == 32)
|
|
len = 0;
|
|
else
|
|
len = len - 1;
|
|
|
|
/* mask out bits we are going to set */
|
|
regval &= ~(SPMODE_CP_BEGIN_EDGECLK | SPMODE_CI_INACTIVEHIGH
|
|
| SPMODE_LEN(0xF) | SPMODE_DIV16
|
|
| SPMODE_PM(0xF) | SPMODE_REV | SPMODE_LOOP);
|
|
|
|
if (spi->mode & SPI_CPHA)
|
|
regval |= SPMODE_CP_BEGIN_EDGECLK;
|
|
if (spi->mode & SPI_CPOL)
|
|
regval |= SPMODE_CI_INACTIVEHIGH;
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
regval |= SPMODE_REV;
|
|
if (spi->mode & SPI_LOOP)
|
|
regval |= SPMODE_LOOP;
|
|
|
|
regval |= SPMODE_LEN(len);
|
|
|
|
if ((mpc83xx_spi->spibrg / spi->max_speed_hz) >= 64) {
|
|
pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 64) - 1;
|
|
if (pm > 0x0f) {
|
|
dev_err(&spi->dev, "Requested speed is too "
|
|
"low: %d Hz. Will use %d Hz instead.\n",
|
|
spi->max_speed_hz,
|
|
mpc83xx_spi->spibrg / 1024);
|
|
pm = 0x0f;
|
|
}
|
|
regval |= SPMODE_PM(pm) | SPMODE_DIV16;
|
|
} else {
|
|
pm = mpc83xx_spi->spibrg / (spi->max_speed_hz * 4);
|
|
if (pm)
|
|
pm--;
|
|
regval |= SPMODE_PM(pm);
|
|
}
|
|
|
|
/* Turn off SPI unit prior changing mode */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
|
|
if (mpc83xx_spi->activate_cs)
|
|
mpc83xx_spi->activate_cs(spi->chip_select, pol);
|
|
}
|
|
}
|
|
|
|
static
|
|
int mpc83xx_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
u32 regval;
|
|
u8 bits_per_word;
|
|
u32 hz;
|
|
|
|
mpc83xx_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if (t) {
|
|
bits_per_word = t->bits_per_word;
|
|
hz = t->speed_hz;
|
|
} else {
|
|
bits_per_word = 0;
|
|
hz = 0;
|
|
}
|
|
|
|
/* spi_transfer level calls that work per-word */
|
|
if (!bits_per_word)
|
|
bits_per_word = spi->bits_per_word;
|
|
|
|
/* Make sure its a bit width we support [4..16, 32] */
|
|
if ((bits_per_word < 4)
|
|
|| ((bits_per_word > 16) && (bits_per_word != 32)))
|
|
return -EINVAL;
|
|
|
|
mpc83xx_spi->rx_shift = 0;
|
|
mpc83xx_spi->tx_shift = 0;
|
|
if (bits_per_word <= 8) {
|
|
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
|
|
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
|
|
if (mpc83xx_spi->qe_mode) {
|
|
mpc83xx_spi->rx_shift = 16;
|
|
mpc83xx_spi->tx_shift = 24;
|
|
}
|
|
} else if (bits_per_word <= 16) {
|
|
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u16;
|
|
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u16;
|
|
if (mpc83xx_spi->qe_mode) {
|
|
mpc83xx_spi->rx_shift = 16;
|
|
mpc83xx_spi->tx_shift = 16;
|
|
}
|
|
} else if (bits_per_word <= 32) {
|
|
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u32;
|
|
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u32;
|
|
} else
|
|
return -EINVAL;
|
|
|
|
if (mpc83xx_spi->qe_mode && spi->mode & SPI_LSB_FIRST) {
|
|
mpc83xx_spi->tx_shift = 0;
|
|
if (bits_per_word <= 8)
|
|
mpc83xx_spi->rx_shift = 8;
|
|
else
|
|
mpc83xx_spi->rx_shift = 0;
|
|
}
|
|
|
|
/* nsecs = (clock period)/2 */
|
|
if (!hz)
|
|
hz = spi->max_speed_hz;
|
|
mpc83xx_spi->nsecs = (1000000000 / 2) / hz;
|
|
if (mpc83xx_spi->nsecs > MAX_UDELAY_MS * 1000)
|
|
return -EINVAL;
|
|
|
|
if (bits_per_word == 32)
|
|
bits_per_word = 0;
|
|
else
|
|
bits_per_word = bits_per_word - 1;
|
|
|
|
regval = mpc83xx_spi_read_reg(&mpc83xx_spi->base->mode);
|
|
|
|
/* mask out bits we are going to set */
|
|
regval &= ~(SPMODE_LEN(0xF) | SPMODE_REV);
|
|
regval |= SPMODE_LEN(bits_per_word);
|
|
if (!(spi->mode & SPI_LSB_FIRST))
|
|
regval |= SPMODE_REV;
|
|
|
|
/* Turn off SPI unit prior changing mode */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH \
|
|
| SPI_LSB_FIRST | SPI_LOOP)
|
|
|
|
static int mpc83xx_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct spi_bitbang *bitbang;
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
int retval;
|
|
|
|
if (spi->mode & ~MODEBITS) {
|
|
dev_dbg(&spi->dev, "setup: unsupported mode bits %x\n",
|
|
spi->mode & ~MODEBITS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!spi->max_speed_hz)
|
|
return -EINVAL;
|
|
|
|
bitbang = spi_master_get_devdata(spi->master);
|
|
mpc83xx_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if (!spi->bits_per_word)
|
|
spi->bits_per_word = 8;
|
|
|
|
retval = mpc83xx_spi_setup_transfer(spi, NULL);
|
|
if (retval < 0)
|
|
return retval;
|
|
|
|
dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec\n",
|
|
__FUNCTION__, spi->mode & (SPI_CPOL | SPI_CPHA),
|
|
spi->bits_per_word, 2 * mpc83xx_spi->nsecs);
|
|
|
|
/* NOTE we _need_ to call chipselect() early, ideally with adapter
|
|
* setup, unless the hardware defaults cooperate to avoid confusion
|
|
* between normal (active low) and inverted chipselects.
|
|
*/
|
|
|
|
/* deselect chip (low or high) */
|
|
spin_lock(&bitbang->lock);
|
|
if (!bitbang->busy) {
|
|
bitbang->chipselect(spi, BITBANG_CS_INACTIVE);
|
|
ndelay(mpc83xx_spi->nsecs);
|
|
}
|
|
spin_unlock(&bitbang->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mpc83xx_spi_bufs(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
u32 word;
|
|
|
|
mpc83xx_spi = spi_master_get_devdata(spi->master);
|
|
|
|
mpc83xx_spi->tx = t->tx_buf;
|
|
mpc83xx_spi->rx = t->rx_buf;
|
|
mpc83xx_spi->count = t->len;
|
|
INIT_COMPLETION(mpc83xx_spi->done);
|
|
|
|
/* enable rx ints */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, SPIM_NE);
|
|
|
|
/* transmit word */
|
|
word = mpc83xx_spi->get_tx(mpc83xx_spi);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
|
|
|
|
wait_for_completion(&mpc83xx_spi->done);
|
|
|
|
/* disable rx ints */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
|
|
|
|
return t->len - mpc83xx_spi->count;
|
|
}
|
|
|
|
irqreturn_t mpc83xx_spi_irq(s32 irq, void *context_data)
|
|
{
|
|
struct mpc83xx_spi *mpc83xx_spi = context_data;
|
|
u32 event;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
|
|
/* Get interrupt events(tx/rx) */
|
|
event = mpc83xx_spi_read_reg(&mpc83xx_spi->base->event);
|
|
|
|
/* We need handle RX first */
|
|
if (event & SPIE_NE) {
|
|
u32 rx_data = mpc83xx_spi_read_reg(&mpc83xx_spi->base->receive);
|
|
|
|
if (mpc83xx_spi->rx)
|
|
mpc83xx_spi->get_rx(rx_data, mpc83xx_spi);
|
|
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
if ((event & SPIE_NF) == 0)
|
|
/* spin until TX is done */
|
|
while (((event =
|
|
mpc83xx_spi_read_reg(&mpc83xx_spi->base->event)) &
|
|
SPIE_NF) == 0)
|
|
cpu_relax();
|
|
|
|
mpc83xx_spi->count -= 1;
|
|
if (mpc83xx_spi->count) {
|
|
u32 word = mpc83xx_spi->get_tx(mpc83xx_spi);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->transmit, word);
|
|
} else {
|
|
complete(&mpc83xx_spi->done);
|
|
}
|
|
|
|
/* Clear the events */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, event);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int __init mpc83xx_spi_probe(struct platform_device *dev)
|
|
{
|
|
struct spi_master *master;
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
struct fsl_spi_platform_data *pdata;
|
|
struct resource *r;
|
|
u32 regval;
|
|
int ret = 0;
|
|
|
|
/* Get resources(memory, IRQ) associated with the device */
|
|
master = spi_alloc_master(&dev->dev, sizeof(struct mpc83xx_spi));
|
|
|
|
if (master == NULL) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
platform_set_drvdata(dev, master);
|
|
pdata = dev->dev.platform_data;
|
|
|
|
if (pdata == NULL) {
|
|
ret = -ENODEV;
|
|
goto free_master;
|
|
}
|
|
|
|
r = platform_get_resource(dev, IORESOURCE_MEM, 0);
|
|
if (r == NULL) {
|
|
ret = -ENODEV;
|
|
goto free_master;
|
|
}
|
|
mpc83xx_spi = spi_master_get_devdata(master);
|
|
mpc83xx_spi->bitbang.master = spi_master_get(master);
|
|
mpc83xx_spi->bitbang.chipselect = mpc83xx_spi_chipselect;
|
|
mpc83xx_spi->bitbang.setup_transfer = mpc83xx_spi_setup_transfer;
|
|
mpc83xx_spi->bitbang.txrx_bufs = mpc83xx_spi_bufs;
|
|
mpc83xx_spi->activate_cs = pdata->activate_cs;
|
|
mpc83xx_spi->deactivate_cs = pdata->deactivate_cs;
|
|
mpc83xx_spi->qe_mode = pdata->qe_mode;
|
|
mpc83xx_spi->get_rx = mpc83xx_spi_rx_buf_u8;
|
|
mpc83xx_spi->get_tx = mpc83xx_spi_tx_buf_u8;
|
|
mpc83xx_spi->spibrg = pdata->sysclk;
|
|
|
|
mpc83xx_spi->rx_shift = 0;
|
|
mpc83xx_spi->tx_shift = 0;
|
|
if (mpc83xx_spi->qe_mode) {
|
|
mpc83xx_spi->rx_shift = 16;
|
|
mpc83xx_spi->tx_shift = 24;
|
|
}
|
|
|
|
mpc83xx_spi->bitbang.master->setup = mpc83xx_spi_setup;
|
|
init_completion(&mpc83xx_spi->done);
|
|
|
|
mpc83xx_spi->base = ioremap(r->start, r->end - r->start + 1);
|
|
if (mpc83xx_spi->base == NULL) {
|
|
ret = -ENOMEM;
|
|
goto put_master;
|
|
}
|
|
|
|
mpc83xx_spi->irq = platform_get_irq(dev, 0);
|
|
|
|
if (mpc83xx_spi->irq < 0) {
|
|
ret = -ENXIO;
|
|
goto unmap_io;
|
|
}
|
|
|
|
/* Register for SPI Interrupt */
|
|
ret = request_irq(mpc83xx_spi->irq, mpc83xx_spi_irq,
|
|
0, "mpc83xx_spi", mpc83xx_spi);
|
|
|
|
if (ret != 0)
|
|
goto unmap_io;
|
|
|
|
master->bus_num = pdata->bus_num;
|
|
master->num_chipselect = pdata->max_chipselect;
|
|
|
|
/* SPI controller initializations */
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, 0);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mask, 0);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->command, 0);
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->event, 0xffffffff);
|
|
|
|
/* Enable SPI interface */
|
|
regval = pdata->initial_spmode | SPMODE_INIT_VAL | SPMODE_ENABLE;
|
|
if (pdata->qe_mode)
|
|
regval |= SPMODE_OP;
|
|
|
|
mpc83xx_spi_write_reg(&mpc83xx_spi->base->mode, regval);
|
|
|
|
ret = spi_bitbang_start(&mpc83xx_spi->bitbang);
|
|
|
|
if (ret != 0)
|
|
goto free_irq;
|
|
|
|
printk(KERN_INFO
|
|
"%s: MPC83xx SPI Controller driver at 0x%p (irq = %d)\n",
|
|
dev->dev.bus_id, mpc83xx_spi->base, mpc83xx_spi->irq);
|
|
|
|
return ret;
|
|
|
|
free_irq:
|
|
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
|
|
unmap_io:
|
|
iounmap(mpc83xx_spi->base);
|
|
put_master:
|
|
spi_master_put(master);
|
|
free_master:
|
|
kfree(master);
|
|
err:
|
|
return ret;
|
|
}
|
|
|
|
static int __exit mpc83xx_spi_remove(struct platform_device *dev)
|
|
{
|
|
struct mpc83xx_spi *mpc83xx_spi;
|
|
struct spi_master *master;
|
|
|
|
master = platform_get_drvdata(dev);
|
|
mpc83xx_spi = spi_master_get_devdata(master);
|
|
|
|
spi_bitbang_stop(&mpc83xx_spi->bitbang);
|
|
free_irq(mpc83xx_spi->irq, mpc83xx_spi);
|
|
iounmap(mpc83xx_spi->base);
|
|
spi_master_put(mpc83xx_spi->bitbang.master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("mpc83xx_spi"); /* for platform bus hotplug */
|
|
static struct platform_driver mpc83xx_spi_driver = {
|
|
.remove = __exit_p(mpc83xx_spi_remove),
|
|
.driver = {
|
|
.name = "mpc83xx_spi",
|
|
},
|
|
};
|
|
|
|
static int __init mpc83xx_spi_init(void)
|
|
{
|
|
return platform_driver_probe(&mpc83xx_spi_driver, mpc83xx_spi_probe);
|
|
}
|
|
|
|
static void __exit mpc83xx_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&mpc83xx_spi_driver);
|
|
}
|
|
|
|
module_init(mpc83xx_spi_init);
|
|
module_exit(mpc83xx_spi_exit);
|
|
|
|
MODULE_AUTHOR("Kumar Gala");
|
|
MODULE_DESCRIPTION("Simple MPC83xx SPI Driver");
|
|
MODULE_LICENSE("GPL");
|