mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
c873d14d30
The added gpio-gate-clock is a basic clock that can be enabled and disabled trough a gpio output. The DT binding document for the clock is also added. For EPROBE_DEFER handling the registering of the clock has to be delayed until of_clk_get() call time. Signed-off-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
22 lines
570 B
Plaintext
22 lines
570 B
Plaintext
Binding for simple gpio gated clock.
|
|
|
|
This binding uses the common clock binding[1].
|
|
|
|
[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
|
|
|
|
Required properties:
|
|
- compatible : shall be "gpio-gate-clock".
|
|
- #clock-cells : from common clock binding; shall be set to 0.
|
|
- enable-gpios : GPIO reference for enabling and disabling the clock.
|
|
|
|
Optional properties:
|
|
- clocks: Maximum of one parent clock is supported.
|
|
|
|
Example:
|
|
clock {
|
|
compatible = "gpio-gate-clock";
|
|
clocks = <&parentclk>;
|
|
#clock-cells = <0>;
|
|
enable-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
|
|
};
|