2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-25 21:54:06 +08:00
linux-next/drivers/infiniband/hw/ipath/ips_common.h
Bryan O'Sullivan 759d57686d [PATCH] IB/ipath: update copyrights and other strings to reflect new company name
Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com>
Cc: "Michael S. Tsirkin" <mst@mellanox.co.il>
Cc: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-01 09:55:58 -07:00

265 lines
7.3 KiB
C

#ifndef IPS_COMMON_H
#define IPS_COMMON_H
/*
* Copyright (c) 2006 QLogic, Inc. All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "ipath_common.h"
struct ipath_header {
/*
* Version - 4 bits, Port - 4 bits, TID - 10 bits and Offset -
* 14 bits before ECO change ~28 Dec 03. After that, Vers 4,
* Port 3, TID 11, offset 14.
*/
__le32 ver_port_tid_offset;
__le16 chksum;
__le16 pkt_flags;
};
struct ips_message_header {
__be16 lrh[4];
__be32 bth[3];
/* fields below this point are in host byte order */
struct ipath_header iph;
__u8 sub_opcode;
__u8 flags;
__u16 src_rank;
/* 24 bits. The upper 8 bit is available for other use */
union {
struct {
unsigned ack_seq_num:24;
unsigned port:4;
unsigned unused:4;
};
__u32 ack_seq_num_org;
};
__u8 expected_tid_session_id;
__u8 tinylen; /* to aid MPI */
union {
__u16 tag; /* to aid MPI */
__u16 mqhdr; /* for PSM MQ */
};
union {
__u32 mpi[4]; /* to aid MPI */
__u32 data[4];
__u64 mq[2]; /* for PSM MQ */
struct {
__u16 mtu;
__u8 major_ver;
__u8 minor_ver;
__u32 not_used; //free
__u32 run_id;
__u32 client_ver;
};
};
};
struct ether_header {
__be16 lrh[4];
__be32 bth[3];
struct ipath_header iph;
__u8 sub_opcode;
__u8 cmd;
__be16 lid;
__u16 mac[3];
__u8 frag_num;
__u8 seq_num;
__le32 len;
/* MUST be of word size due to PIO write requirements */
__le32 csum;
__le16 csum_offset;
__le16 flags;
__u16 first_2_bytes;
__u8 unused[2]; /* currently unused */
};
/*
* The PIO buffer used for sending infinipath messages must only be written
* in 32-bit words, all the data must be written, and no writes can occur
* after the last word is written (which transfers "ownership" of the buffer
* to the chip and triggers the message to be sent).
* Since the Linux sk_buff structure can be recursive, non-aligned, and
* any number of bytes in each segment, we use the following structure
* to keep information about the overall state of the copy operation.
* This is used to save the information needed to store the checksum
* in the right place before sending the last word to the hardware and
* to buffer the last 0-3 bytes of non-word sized segments.
*/
struct copy_data_s {
struct ether_header *hdr;
/* addr of PIO buf to write csum to */
__u32 __iomem *csum_pio;
__u32 __iomem *to; /* addr of PIO buf to write data to */
__u32 device; /* which device to allocate PIO bufs from */
__s32 error; /* set if there is an error. */
__s32 extra; /* amount of data saved in u.buf below */
__u32 len; /* total length to send in bytes */
__u32 flen; /* frament length in words */
__u32 csum; /* partial IP checksum */
__u32 pos; /* position for partial checksum */
__u32 offset; /* offset to where data currently starts */
__s32 checksum_calc; /* set to 1 when csum has been calculated */
struct sk_buff *skb;
union {
__u32 w;
__u8 buf[4];
} u;
};
/* IB - LRH header consts */
#define IPS_LRH_GRH 0x0003 /* 1. word of IB LRH - next header: GRH */
#define IPS_LRH_BTH 0x0002 /* 1. word of IB LRH - next header: BTH */
#define IPS_OFFSET 0
/*
* defines the cut-off point between the header queue and eager/expected
* TID queue
*/
#define NUM_OF_EXTRA_WORDS_IN_HEADER_QUEUE \
((sizeof(struct ips_message_header) - \
offsetof(struct ips_message_header, iph)) >> 2)
/* OpCodes */
#define OPCODE_IPS 0xC0
#define OPCODE_ITH4X 0xC1
/* OpCode 30 is use by stand-alone test programs */
#define OPCODE_RAW_DATA 0xDE
/* last OpCode (31) is reserved for test */
#define OPCODE_TEST 0xDF
/* sub OpCodes - ips */
#define OPCODE_SEQ_DATA 0x01
#define OPCODE_SEQ_CTRL 0x02
#define OPCODE_SEQ_MQ_DATA 0x03
#define OPCODE_SEQ_MQ_CTRL 0x04
#define OPCODE_ACK 0x10
#define OPCODE_NAK 0x11
#define OPCODE_ERR_CHK 0x20
#define OPCODE_ERR_CHK_PLS 0x21
#define OPCODE_STARTUP 0x30
#define OPCODE_STARTUP_ACK 0x31
#define OPCODE_STARTUP_NAK 0x32
#define OPCODE_STARTUP_EXT 0x34
#define OPCODE_STARTUP_ACK_EXT 0x35
#define OPCODE_STARTUP_NAK_EXT 0x36
#define OPCODE_TIDS_RELEASE 0x40
#define OPCODE_TIDS_RELEASE_CONFIRM 0x41
#define OPCODE_CLOSE 0x50
#define OPCODE_CLOSE_ACK 0x51
/*
* like OPCODE_CLOSE, but no complaint if other side has already closed.
* Used when doing abort(), MPI_Abort(), etc.
*/
#define OPCODE_ABORT 0x52
/* sub OpCodes - ith4x */
#define OPCODE_ENCAP 0x81
#define OPCODE_LID_ARP 0x82
/* Receive Header Queue: receive type (from infinipath) */
#define RCVHQ_RCV_TYPE_EXPECTED 0
#define RCVHQ_RCV_TYPE_EAGER 1
#define RCVHQ_RCV_TYPE_NON_KD 2
#define RCVHQ_RCV_TYPE_ERROR 3
/* misc. */
#define SIZE_OF_CRC 1
#define EAGER_TID_ID INFINIPATH_I_TID_MASK
#define IPS_DEFAULT_P_KEY 0xFFFF
#define IPS_PERMISSIVE_LID 0xFFFF
#define IPS_MULTICAST_LID_BASE 0xC000
#define IPS_AETH_CREDIT_SHIFT 24
#define IPS_AETH_CREDIT_MASK 0x1F
#define IPS_AETH_CREDIT_INVAL 0x1F
#define IPS_PSN_MASK 0xFFFFFF
#define IPS_MSN_MASK 0xFFFFFF
#define IPS_QPN_MASK 0xFFFFFF
#define IPS_MULTICAST_QPN 0xFFFFFF
/* functions for extracting fields from rcvhdrq entries */
static inline __u32 ips_get_hdr_err_flags(const __le32 * rbuf)
{
return __le32_to_cpu(rbuf[1]);
}
static inline __u32 ips_get_index(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_EGRINDEX_SHIFT)
& INFINIPATH_RHF_EGRINDEX_MASK;
}
static inline __u32 ips_get_rcv_type(const __le32 * rbuf)
{
return (__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_RCVTYPE_SHIFT)
& INFINIPATH_RHF_RCVTYPE_MASK;
}
static inline __u32 ips_get_length_in_bytes(const __le32 * rbuf)
{
return ((__le32_to_cpu(rbuf[0]) >> INFINIPATH_RHF_LENGTH_SHIFT)
& INFINIPATH_RHF_LENGTH_MASK) << 2;
}
static inline void *ips_get_first_protocol_header(const __u32 * rbuf)
{
return (void *)&rbuf[2];
}
static inline struct ips_message_header *ips_get_ips_header(const __u32 *
rbuf)
{
return (struct ips_message_header *)&rbuf[2];
}
static inline __u32 ips_get_ipath_ver(__le32 hdrword)
{
return (__le32_to_cpu(hdrword) >> INFINIPATH_I_VERS_SHIFT)
& INFINIPATH_I_VERS_MASK;
}
#endif /* IPS_COMMON_H */