renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-27 06:34:11 +08:00
Code
354e57f3a0
linux-next/arch/arm/mach-at91
History
Linus Walleij 354e57f3a0 ARM/serial: at91: switch atmel serial to use gpiolib 
This passes the errata fix using a GPIO to control the RTS pin
on one of the AT91 chips to use gpiolib instead of the
AT91-specific interfaces. Also remove the reliance on
compile-time #defines and the cpu_* check and rely on the
platform passing down the proper GPIO pin through platform
data.

This is a prerequisite for getting rid of the local GPIO
implementation in the AT91 platform and move toward
multiplatform.

The patch also adds device tree support for getting the
RTS GPIO pin from the device tree on DT boot paths.

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
2013-12-20 11:41:30 +01:00
..
include/mach Fixes for RTT & RTC interrupts that can fire early 2013-11-15 11:10:41 -08:00
at91_aic.h arm: at91 move at91_aic.h to arch/arm/mach-at91 2012-11-06 20:29:41 +08:00
at91_rstc.h ARM: at91: remove trailing semicolon from macros 2013-04-08 17:47:44 +02:00
at91_shdwc.h ARM: at91: remove trailing semicolon from macros 2013-04-08 17:47:44 +02:00
at91_tc.h arn: at91: move at91_tc.h to arch/arm/mach-at91 2012-11-06 20:29:44 +08:00
at91rm9200_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91rm9200_time.c ARM: at91: remove IRQF_DISABLED 2013-09-19 15:36:35 +02:00
at91rm9200.c ARM: AT91: DT: pm: Select ram controller standby based on DT 2013-10-16 23:51:47 +02:00
at91sam9_alt_reset.S arm: at91: move reset controller header to arm/arm/mach-at91 2012-11-06 20:30:48 +08:00
at91sam9g45_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91sam9g45_reset.S ARM: at91: sam9g45: shutdown ddr1 too when rebooting 2013-09-30 09:58:44 -07:00
at91sam9g45.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
at91sam9n12.c Fixes for RTT & RTC interrupts that can fire early 2013-11-15 11:10:41 -08:00
at91sam9rl_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91sam9rl.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
at91sam9x5.c ARM: at91: fix hanged boot due to early rtc-interrupt 2013-11-15 12:13:33 +01:00
at91sam926x_time.c ARM: at91: remove IRQF_DISABLED 2013-09-19 15:36:35 +02:00
at91sam9260_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91sam9260.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
at91sam9261_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91sam9261.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
at91sam9263_devices.c ARM/serial: at91: switch atmel serial to use gpiolib 2013-12-20 11:41:30 +01:00
at91sam9263.c ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
at91x40_time.c ARM: at91: remove IRQF_DISABLED 2013-09-19 15:36:35 +02:00
at91x40.c ARM: at91: fix at91_extern_irq usage for non-dt boards 2013-06-21 16:35:26 +02:00
board-1arm.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-afeb-9260v1.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-cam60.c ARM: at91: cam60: fix incorrect placement of __initdata tag 2013-09-30 17:50:51 +02:00
board-carmeva.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-cpu9krea.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-cpuat91.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-csb337.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-csb637.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-dt-rm9200.c ARM: at91: remove init_machine() as default is suitable 2013-10-16 15:47:08 +02:00
board-dt-sam9.c ARM: at91: remove init_machine() as default is suitable 2013-10-16 15:47:08 +02:00
board-dt-sama5.c phy: micrel: Add definitions for common Micrel PHY registers 2013-08-22 23:20:54 +08:00
board-eb01.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-eb9200.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-ecbat91.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-eco920.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-flexibity.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-foxg20.c ARM: w1-gpio: fix erroneous gpio requests 2013-03-12 16:20:45 -07:00
board-gsia18s.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-kafa.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-kb9202.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-pcontrol-g20.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-picotux200.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-qil-a9260.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-rm9200ek.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-rsi-ews.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-sam9-l9260.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-sam9g20ek.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board-sam9m10g45ek.c video: atmel_lcdfb: fix platform data struct 2013-09-27 09:26:19 +03:00
board-sam9rlek.c video: atmel_lcdfb: pass the pdata as params 2013-09-27 09:26:20 +03:00
board-sam9260ek.c misc: (at24) move header to linux/platform_data/ 2013-09-30 06:02:34 +02:00
board-sam9261ek.c video: atmel_lcdfb: pass the pdata as params 2013-09-27 09:26:20 +03:00
board-sam9263ek.c Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux 2013-11-18 15:50:07 -08:00
board-snapper9260.c gpio: (gpio-pca953x) move header to linux/platform_data/ 2013-08-29 12:33:52 -07:00
board-stamp9g20.c ARM: w1-gpio: fix erroneous gpio requests 2013-03-12 16:20:45 -07:00
board-yl-9200.c ARM: delete struct sys_timer 2012-12-24 09:36:38 -07:00
board.h video: atmel_lcdfb: fix platform data struct 2013-09-27 09:26:19 +03:00
clock.c ARM: at91/PMC: use at91_usb_rate() for UTMI PLL 2013-06-26 15:24:11 +02:00
clock.h ARM: at91: introduce SAMA5 support 2013-03-26 12:18:04 +01:00
generic.h ARM: at91: fix hanged boot due to early rtt-interrupt 2013-11-15 12:13:33 +01:00
gpio.c arm: Move chained_irq_(enter|exit) to a generic file 2013-03-26 16:11:43 +00:00
gsia18s.h arm: at91: move board header to arch/arm/mach-at91 2012-11-06 20:29:48 +08:00
irq.c ARM: at91: fix at91_extern_irq usage for non-dt boards 2013-06-21 16:35:26 +02:00
Kconfig ARM: at91: Fix link breakage when !CONFIG_PHYLIB 2013-06-18 10:20:22 +02:00
Kconfig.non_dt ARM SoC device tree changes 2013-07-02 14:23:01 -07:00
leds.c arm: at91 move board.h to arch/arm/mach-at91 2012-11-06 20:29:37 +08:00
Makefile ARM: SoC fixes for 3.13 merge window 2013-11-16 12:45:55 -08:00
Makefile.boot ARM: move all dtb targets out of Makefile.boot 2012-09-14 09:22:04 -05:00
pm_slowclock.S ARN: at91: introduce SOC_AT91xxx define to allow to compile SoC core support 2012-04-17 14:47:21 +02:00
pm.c ARM: at91: cpuidle: Convert to platform driver 2013-10-16 23:46:13 +02:00
pm.h ARM: AT91: pm: Factorize standby function 2013-10-16 23:51:36 +02:00
sam9_smc.c ARM: at91: add accessor to manage SMC 2012-02-13 18:31:36 +01:00
sam9_smc.h ARM: at91: add accessor to manage SMC 2012-02-13 18:31:36 +01:00
sama5d3.c ARM: at91: fix hanged boot due to early rtc-interrupt 2013-11-15 12:13:33 +01:00
setup.c ARM: AT91: DT: pm: Select ram controller standby based on DT 2013-10-16 23:51:47 +02:00
soc.h ARM: at91: fix at91_extern_irq usage for non-dt boards 2013-06-21 16:35:26 +02:00
stamp9g20.h arm: at91: move board header to arch/arm/mach-at91 2012-11-06 20:29:48 +08:00
sysirq_mask.c ARM: at91: fix hanged boot due to early rtt-interrupt 2013-11-15 12:13:33 +01:00