2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/arch/arm/plat-s3c64xx/cpufreq.c
Mark Brown b3748ddd80 [ARM] S3C64XX: Initial support for DVFS
This patch provides initial support for CPU frequency scaling on the
Samsung S3C ARM processors. Currently only S3C6410 processors are
supported, though addition of another data table with supported clock
rates should be sufficient to enable support for further CPUs.

Use the regulator framework to provide optional support for DVFS in
the S3C cpufreq driver. When a software controllable regulator is
configured the driver will use it to lower the supply voltage when
running at a lower frequency, giving improved power savings.

When regulator support is disabled or no regulator can be obtained
for VDDARM the driver will fall back to scaling only the frequency.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
2009-06-16 23:36:24 +01:00

263 lines
6.0 KiB
C

/* linux/arch/arm/plat-s3c64xx/cpufreq.c
*
* Copyright 2009 Wolfson Microelectronics plc
*
* S3C64xx CPUfreq Support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/init.h>
#include <linux/cpufreq.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/regulator/consumer.h>
static struct clk *armclk;
static struct regulator *vddarm;
#ifdef CONFIG_CPU_S3C6410
struct s3c64xx_dvfs {
unsigned int vddarm_min;
unsigned int vddarm_max;
};
static struct s3c64xx_dvfs s3c64xx_dvfs_table[] = {
[0] = { 1000000, 1000000 },
[1] = { 1000000, 1050000 },
[2] = { 1050000, 1100000 },
[3] = { 1050000, 1150000 },
[4] = { 1250000, 1350000 },
};
static struct cpufreq_frequency_table s3c64xx_freq_table[] = {
{ 0, 66000 },
{ 0, 133000 },
{ 1, 222000 },
{ 1, 266000 },
{ 2, 333000 },
{ 2, 400000 },
{ 3, 532000 },
{ 3, 533000 },
{ 4, 667000 },
{ 0, CPUFREQ_TABLE_END },
};
#endif
static int s3c64xx_cpufreq_verify_speed(struct cpufreq_policy *policy)
{
if (policy->cpu != 0)
return -EINVAL;
return cpufreq_frequency_table_verify(policy, s3c64xx_freq_table);
}
static unsigned int s3c64xx_cpufreq_get_speed(unsigned int cpu)
{
if (cpu != 0)
return 0;
return clk_get_rate(armclk) / 1000;
}
static int s3c64xx_cpufreq_set_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
int ret;
unsigned int i;
struct cpufreq_freqs freqs;
struct s3c64xx_dvfs *dvfs;
ret = cpufreq_frequency_table_target(policy, s3c64xx_freq_table,
target_freq, relation, &i);
if (ret != 0)
return ret;
freqs.cpu = 0;
freqs.old = clk_get_rate(armclk) / 1000;
freqs.new = s3c64xx_freq_table[i].frequency;
freqs.flags = 0;
dvfs = &s3c64xx_dvfs_table[s3c64xx_freq_table[i].index];
if (freqs.old == freqs.new)
return 0;
pr_debug("cpufreq: Transition %d-%dkHz\n", freqs.old, freqs.new);
cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
#ifdef CONFIG_REGULATOR
if (vddarm && freqs.new > freqs.old) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
freqs.new, ret);
goto err;
}
}
#endif
ret = clk_set_rate(armclk, freqs.new * 1000);
if (ret < 0) {
pr_err("cpufreq: Failed to set rate %dkHz: %d\n",
freqs.new, ret);
goto err;
}
#ifdef CONFIG_REGULATOR
if (vddarm && freqs.new < freqs.old) {
ret = regulator_set_voltage(vddarm,
dvfs->vddarm_min,
dvfs->vddarm_max);
if (ret != 0) {
pr_err("cpufreq: Failed to set VDDARM for %dkHz: %d\n",
freqs.new, ret);
goto err_clk;
}
}
#endif
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
pr_debug("cpufreq: Set actual frequency %lukHz\n",
clk_get_rate(armclk) / 1000);
return 0;
err_clk:
if (clk_set_rate(armclk, freqs.old * 1000) < 0)
pr_err("Failed to restore original clock rate\n");
err:
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
return ret;
}
#ifdef CONFIG_REGULATOR
static void __init s3c64xx_cpufreq_constrain_voltages(void)
{
int count, v, i, found;
struct cpufreq_frequency_table *freq;
struct s3c64xx_dvfs *dvfs;
count = regulator_count_voltages(vddarm);
if (count < 0) {
pr_err("cpufreq: Unable to check supported voltages\n");
return;
}
freq = s3c64xx_freq_table;
while (freq->frequency != CPUFREQ_TABLE_END) {
if (freq->frequency == CPUFREQ_ENTRY_INVALID)
continue;
dvfs = &s3c64xx_dvfs_table[freq->index];
found = 0;
for (i = 0; i < count; i++) {
v = regulator_list_voltage(vddarm, i);
if (v >= dvfs->vddarm_min && v <= dvfs->vddarm_max)
found = 1;
}
if (!found) {
pr_debug("cpufreq: %dkHz unsupported by regulator\n",
freq->frequency);
freq->frequency = CPUFREQ_ENTRY_INVALID;
}
freq++;
}
}
#endif
static int __init s3c64xx_cpufreq_driver_init(struct cpufreq_policy *policy)
{
int ret;
struct cpufreq_frequency_table *freq;
if (policy->cpu != 0)
return -EINVAL;
if (s3c64xx_freq_table == NULL) {
pr_err("cpufreq: No frequency information for this CPU\n");
return -ENODEV;
}
armclk = clk_get(NULL, "armclk");
if (IS_ERR(armclk)) {
pr_err("cpufreq: Unable to obtain ARMCLK: %ld\n",
PTR_ERR(armclk));
return PTR_ERR(armclk);
}
#ifdef CONFIG_REGULATOR
vddarm = regulator_get(NULL, "vddarm");
if (IS_ERR(vddarm)) {
ret = PTR_ERR(vddarm);
pr_err("cpufreq: Failed to obtain VDDARM: %d\n", ret);
pr_err("cpufreq: Only frequency scaling available\n");
vddarm = NULL;
} else {
s3c64xx_cpufreq_constrain_voltages();
}
#endif
freq = s3c64xx_freq_table;
while (freq->frequency != CPUFREQ_TABLE_END) {
unsigned long r;
/* Check for frequencies we can generate */
r = clk_round_rate(armclk, freq->frequency * 1000);
r /= 1000;
if (r != freq->frequency)
freq->frequency = CPUFREQ_ENTRY_INVALID;
/* If we have no regulator then assume startup
* frequency is the maximum we can support. */
if (!vddarm && freq->frequency > s3c64xx_cpufreq_get_speed(0))
freq->frequency = CPUFREQ_ENTRY_INVALID;
freq++;
}
policy->cur = clk_get_rate(armclk) / 1000;
/* Pick a conservative guess in ns: we'll need ~1 I2C/SPI
* write plus clock reprogramming. */
policy->cpuinfo.transition_latency = 2 * 1000 * 1000;
ret = cpufreq_frequency_table_cpuinfo(policy, s3c64xx_freq_table);
if (ret != 0) {
pr_err("cpufreq: Failed to configure frequency table: %d\n",
ret);
regulator_put(vddarm);
clk_put(armclk);
}
return ret;
}
static struct cpufreq_driver s3c64xx_cpufreq_driver = {
.owner = THIS_MODULE,
.flags = 0,
.verify = s3c64xx_cpufreq_verify_speed,
.target = s3c64xx_cpufreq_set_target,
.get = s3c64xx_cpufreq_get_speed,
.init = s3c64xx_cpufreq_driver_init,
.name = "s3c",
};
static int __init s3c64xx_cpufreq_init(void)
{
return cpufreq_register_driver(&s3c64xx_cpufreq_driver);
}
module_init(s3c64xx_cpufreq_init);