2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-24 13:13:57 +08:00
linux-next/Documentation/iio/ep93xx_adc.txt
Alexander Sverdlin 8614206a05 iio: adc: New driver for Cirrus Logic EP93xx ADC
New driver adding support for ADC found on Cirrus Logic EP93xx series of SoCs.
Board specific code must take care to create plaform device with all necessary
resources.

Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2017-07-25 19:56:23 +01:00

30 lines
1.0 KiB
Plaintext

Cirrus Logic EP93xx ADC driver.
1. Overview
The driver is intended to work on both low-end (EP9301, EP9302) devices with
5-channel ADC and high-end (EP9307, EP9312, EP9315) devices with 10-channel
touchscreen/ADC module.
2. Channel numbering
Numbering scheme for channels 0..4 is defined in EP9301 and EP9302 datasheets.
EP9307, EP9312 and EP9312 have 3 channels more (total 8), but the numbering is
not defined. So the last three are numbered randomly, let's say.
Assuming ep93xx_adc is IIO device0, you'd find the following entries under
/sys/bus/iio/devices/iio:device0/:
+-----------------+---------------+
| sysfs entry | ball/pin name |
+-----------------+---------------+
| in_voltage0_raw | YM |
| in_voltage1_raw | SXP |
| in_voltage2_raw | SXM |
| in_voltage3_raw | SYP |
| in_voltage4_raw | SYM |
| in_voltage5_raw | XP |
| in_voltage6_raw | XM |
| in_voltage7_raw | YP |
+-----------------+---------------+