mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
321165c3e7
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. This is a cosmetic change to make the code simpler and enhance the readability. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
693 lines
16 KiB
C
693 lines
16 KiB
C
/*
|
|
* Blackfin On-Chip CAN Driver
|
|
*
|
|
* Copyright 2004-2009 Analog Devices Inc.
|
|
*
|
|
* Enter bugs at http://blackfin.uclinux.org/
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <linux/can/dev.h>
|
|
#include <linux/can/error.h>
|
|
|
|
#include <asm/bfin_can.h>
|
|
#include <asm/portmux.h>
|
|
|
|
#define DRV_NAME "bfin_can"
|
|
#define BFIN_CAN_TIMEOUT 100
|
|
#define TX_ECHO_SKB_MAX 1
|
|
|
|
/*
|
|
* bfin can private data
|
|
*/
|
|
struct bfin_can_priv {
|
|
struct can_priv can; /* must be the first member */
|
|
struct net_device *dev;
|
|
void __iomem *membase;
|
|
int rx_irq;
|
|
int tx_irq;
|
|
int err_irq;
|
|
unsigned short *pin_list;
|
|
};
|
|
|
|
/*
|
|
* bfin can timing parameters
|
|
*/
|
|
static const struct can_bittiming_const bfin_can_bittiming_const = {
|
|
.name = DRV_NAME,
|
|
.tseg1_min = 1,
|
|
.tseg1_max = 16,
|
|
.tseg2_min = 1,
|
|
.tseg2_max = 8,
|
|
.sjw_max = 4,
|
|
/*
|
|
* Although the BRP field can be set to any value, it is recommended
|
|
* that the value be greater than or equal to 4, as restrictions
|
|
* apply to the bit timing configuration when BRP is less than 4.
|
|
*/
|
|
.brp_min = 4,
|
|
.brp_max = 1024,
|
|
.brp_inc = 1,
|
|
};
|
|
|
|
static int bfin_can_set_bittiming(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
struct can_bittiming *bt = &priv->can.bittiming;
|
|
u16 clk, timing;
|
|
|
|
clk = bt->brp - 1;
|
|
timing = ((bt->sjw - 1) << 8) | (bt->prop_seg + bt->phase_seg1 - 1) |
|
|
((bt->phase_seg2 - 1) << 4);
|
|
|
|
/*
|
|
* If the SAM bit is set, the input signal is oversampled three times
|
|
* at the SCLK rate.
|
|
*/
|
|
if (priv->can.ctrlmode & CAN_CTRLMODE_3_SAMPLES)
|
|
timing |= SAM;
|
|
|
|
bfin_write(®->clock, clk);
|
|
bfin_write(®->timing, timing);
|
|
|
|
netdev_info(dev, "setting CLOCK=0x%04x TIMING=0x%04x\n", clk, timing);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_can_set_reset_mode(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
int timeout = BFIN_CAN_TIMEOUT;
|
|
int i;
|
|
|
|
/* disable interrupts */
|
|
bfin_write(®->mbim1, 0);
|
|
bfin_write(®->mbim2, 0);
|
|
bfin_write(®->gim, 0);
|
|
|
|
/* reset can and enter configuration mode */
|
|
bfin_write(®->control, SRS | CCR);
|
|
SSYNC();
|
|
bfin_write(®->control, CCR);
|
|
SSYNC();
|
|
while (!(bfin_read(®->control) & CCA)) {
|
|
udelay(10);
|
|
if (--timeout == 0) {
|
|
netdev_err(dev, "fail to enter configuration mode\n");
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* All mailbox configurations are marked as inactive
|
|
* by writing to CAN Mailbox Configuration Registers 1 and 2
|
|
* For all bits: 0 - Mailbox disabled, 1 - Mailbox enabled
|
|
*/
|
|
bfin_write(®->mc1, 0);
|
|
bfin_write(®->mc2, 0);
|
|
|
|
/* Set Mailbox Direction */
|
|
bfin_write(®->md1, 0xFFFF); /* mailbox 1-16 are RX */
|
|
bfin_write(®->md2, 0); /* mailbox 17-32 are TX */
|
|
|
|
/* RECEIVE_STD_CHL */
|
|
for (i = 0; i < 2; i++) {
|
|
bfin_write(®->chl[RECEIVE_STD_CHL + i].id0, 0);
|
|
bfin_write(®->chl[RECEIVE_STD_CHL + i].id1, AME);
|
|
bfin_write(®->chl[RECEIVE_STD_CHL + i].dlc, 0);
|
|
bfin_write(®->msk[RECEIVE_STD_CHL + i].amh, 0x1FFF);
|
|
bfin_write(®->msk[RECEIVE_STD_CHL + i].aml, 0xFFFF);
|
|
}
|
|
|
|
/* RECEIVE_EXT_CHL */
|
|
for (i = 0; i < 2; i++) {
|
|
bfin_write(®->chl[RECEIVE_EXT_CHL + i].id0, 0);
|
|
bfin_write(®->chl[RECEIVE_EXT_CHL + i].id1, AME | IDE);
|
|
bfin_write(®->chl[RECEIVE_EXT_CHL + i].dlc, 0);
|
|
bfin_write(®->msk[RECEIVE_EXT_CHL + i].amh, 0x1FFF);
|
|
bfin_write(®->msk[RECEIVE_EXT_CHL + i].aml, 0xFFFF);
|
|
}
|
|
|
|
bfin_write(®->mc2, BIT(TRANSMIT_CHL - 16));
|
|
bfin_write(®->mc1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
|
|
SSYNC();
|
|
|
|
priv->can.state = CAN_STATE_STOPPED;
|
|
}
|
|
|
|
static void bfin_can_set_normal_mode(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
int timeout = BFIN_CAN_TIMEOUT;
|
|
|
|
/*
|
|
* leave configuration mode
|
|
*/
|
|
bfin_write(®->control, bfin_read(®->control) & ~CCR);
|
|
|
|
while (bfin_read(®->status) & CCA) {
|
|
udelay(10);
|
|
if (--timeout == 0) {
|
|
netdev_err(dev, "fail to leave configuration mode\n");
|
|
BUG();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* clear _All_ tx and rx interrupts
|
|
*/
|
|
bfin_write(®->mbtif1, 0xFFFF);
|
|
bfin_write(®->mbtif2, 0xFFFF);
|
|
bfin_write(®->mbrif1, 0xFFFF);
|
|
bfin_write(®->mbrif2, 0xFFFF);
|
|
|
|
/*
|
|
* clear global interrupt status register
|
|
*/
|
|
bfin_write(®->gis, 0x7FF); /* overwrites with '1' */
|
|
|
|
/*
|
|
* Initialize Interrupts
|
|
* - set bits in the mailbox interrupt mask register
|
|
* - global interrupt mask
|
|
*/
|
|
bfin_write(®->mbim1, BIT(RECEIVE_STD_CHL) + BIT(RECEIVE_EXT_CHL));
|
|
bfin_write(®->mbim2, BIT(TRANSMIT_CHL - 16));
|
|
|
|
bfin_write(®->gim, EPIM | BOIM | RMLIM);
|
|
SSYNC();
|
|
}
|
|
|
|
static void bfin_can_start(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
|
|
/* enter reset mode */
|
|
if (priv->can.state != CAN_STATE_STOPPED)
|
|
bfin_can_set_reset_mode(dev);
|
|
|
|
/* leave reset mode */
|
|
bfin_can_set_normal_mode(dev);
|
|
}
|
|
|
|
static int bfin_can_set_mode(struct net_device *dev, enum can_mode mode)
|
|
{
|
|
switch (mode) {
|
|
case CAN_MODE_START:
|
|
bfin_can_start(dev);
|
|
if (netif_queue_stopped(dev))
|
|
netif_wake_queue(dev);
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_can_get_berr_counter(const struct net_device *dev,
|
|
struct can_berr_counter *bec)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
|
|
u16 cec = bfin_read(®->cec);
|
|
|
|
bec->txerr = cec >> 8;
|
|
bec->rxerr = cec;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_can_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
struct can_frame *cf = (struct can_frame *)skb->data;
|
|
u8 dlc = cf->can_dlc;
|
|
canid_t id = cf->can_id;
|
|
u8 *data = cf->data;
|
|
u16 val;
|
|
int i;
|
|
|
|
if (can_dropped_invalid_skb(dev, skb))
|
|
return NETDEV_TX_OK;
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
/* fill id */
|
|
if (id & CAN_EFF_FLAG) {
|
|
bfin_write(®->chl[TRANSMIT_CHL].id0, id);
|
|
val = ((id & 0x1FFF0000) >> 16) | IDE;
|
|
} else
|
|
val = (id << 2);
|
|
if (id & CAN_RTR_FLAG)
|
|
val |= RTR;
|
|
bfin_write(®->chl[TRANSMIT_CHL].id1, val | AME);
|
|
|
|
/* fill payload */
|
|
for (i = 0; i < 8; i += 2) {
|
|
val = ((7 - i) < dlc ? (data[7 - i]) : 0) +
|
|
((6 - i) < dlc ? (data[6 - i] << 8) : 0);
|
|
bfin_write(®->chl[TRANSMIT_CHL].data[i], val);
|
|
}
|
|
|
|
/* fill data length code */
|
|
bfin_write(®->chl[TRANSMIT_CHL].dlc, dlc);
|
|
|
|
can_put_echo_skb(skb, dev, 0);
|
|
|
|
/* set transmit request */
|
|
bfin_write(®->trs2, BIT(TRANSMIT_CHL - 16));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void bfin_can_rx(struct net_device *dev, u16 isrc)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
int obj;
|
|
int i;
|
|
u16 val;
|
|
|
|
skb = alloc_can_skb(dev, &cf);
|
|
if (skb == NULL)
|
|
return;
|
|
|
|
/* get id */
|
|
if (isrc & BIT(RECEIVE_EXT_CHL)) {
|
|
/* extended frame format (EFF) */
|
|
cf->can_id = ((bfin_read(®->chl[RECEIVE_EXT_CHL].id1)
|
|
& 0x1FFF) << 16)
|
|
+ bfin_read(®->chl[RECEIVE_EXT_CHL].id0);
|
|
cf->can_id |= CAN_EFF_FLAG;
|
|
obj = RECEIVE_EXT_CHL;
|
|
} else {
|
|
/* standard frame format (SFF) */
|
|
cf->can_id = (bfin_read(®->chl[RECEIVE_STD_CHL].id1)
|
|
& 0x1ffc) >> 2;
|
|
obj = RECEIVE_STD_CHL;
|
|
}
|
|
if (bfin_read(®->chl[obj].id1) & RTR)
|
|
cf->can_id |= CAN_RTR_FLAG;
|
|
|
|
/* get data length code */
|
|
cf->can_dlc = get_can_dlc(bfin_read(®->chl[obj].dlc) & 0xF);
|
|
|
|
/* get payload */
|
|
for (i = 0; i < 8; i += 2) {
|
|
val = bfin_read(®->chl[obj].data[i]);
|
|
cf->data[7 - i] = (7 - i) < cf->can_dlc ? val : 0;
|
|
cf->data[6 - i] = (6 - i) < cf->can_dlc ? (val >> 8) : 0;
|
|
}
|
|
|
|
netif_rx(skb);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
}
|
|
|
|
static int bfin_can_err(struct net_device *dev, u16 isrc, u16 status)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
struct can_frame *cf;
|
|
struct sk_buff *skb;
|
|
enum can_state state = priv->can.state;
|
|
|
|
skb = alloc_can_err_skb(dev, &cf);
|
|
if (skb == NULL)
|
|
return -ENOMEM;
|
|
|
|
if (isrc & RMLIS) {
|
|
/* data overrun interrupt */
|
|
netdev_dbg(dev, "data overrun interrupt\n");
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
cf->data[1] = CAN_ERR_CRTL_RX_OVERFLOW;
|
|
stats->rx_over_errors++;
|
|
stats->rx_errors++;
|
|
}
|
|
|
|
if (isrc & BOIS) {
|
|
netdev_dbg(dev, "bus-off mode interrupt\n");
|
|
state = CAN_STATE_BUS_OFF;
|
|
cf->can_id |= CAN_ERR_BUSOFF;
|
|
can_bus_off(dev);
|
|
}
|
|
|
|
if (isrc & EPIS) {
|
|
/* error passive interrupt */
|
|
netdev_dbg(dev, "error passive interrupt\n");
|
|
state = CAN_STATE_ERROR_PASSIVE;
|
|
}
|
|
|
|
if ((isrc & EWTIS) || (isrc & EWRIS)) {
|
|
netdev_dbg(dev, "Error Warning Transmit/Receive Interrupt\n");
|
|
state = CAN_STATE_ERROR_WARNING;
|
|
}
|
|
|
|
if (state != priv->can.state && (state == CAN_STATE_ERROR_WARNING ||
|
|
state == CAN_STATE_ERROR_PASSIVE)) {
|
|
u16 cec = bfin_read(®->cec);
|
|
u8 rxerr = cec;
|
|
u8 txerr = cec >> 8;
|
|
|
|
cf->can_id |= CAN_ERR_CRTL;
|
|
if (state == CAN_STATE_ERROR_WARNING) {
|
|
priv->can.can_stats.error_warning++;
|
|
cf->data[1] = (txerr > rxerr) ?
|
|
CAN_ERR_CRTL_TX_WARNING :
|
|
CAN_ERR_CRTL_RX_WARNING;
|
|
} else {
|
|
priv->can.can_stats.error_passive++;
|
|
cf->data[1] = (txerr > rxerr) ?
|
|
CAN_ERR_CRTL_TX_PASSIVE :
|
|
CAN_ERR_CRTL_RX_PASSIVE;
|
|
}
|
|
}
|
|
|
|
if (status) {
|
|
priv->can.can_stats.bus_error++;
|
|
|
|
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
|
|
|
|
if (status & BEF)
|
|
cf->data[2] |= CAN_ERR_PROT_BIT;
|
|
else if (status & FER)
|
|
cf->data[2] |= CAN_ERR_PROT_FORM;
|
|
else if (status & SER)
|
|
cf->data[2] |= CAN_ERR_PROT_STUFF;
|
|
else
|
|
cf->data[2] |= CAN_ERR_PROT_UNSPEC;
|
|
}
|
|
|
|
priv->can.state = state;
|
|
|
|
netif_rx(skb);
|
|
|
|
stats->rx_packets++;
|
|
stats->rx_bytes += cf->can_dlc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static irqreturn_t bfin_can_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
struct net_device_stats *stats = &dev->stats;
|
|
u16 status, isrc;
|
|
|
|
if ((irq == priv->tx_irq) && bfin_read(®->mbtif2)) {
|
|
/* transmission complete interrupt */
|
|
bfin_write(®->mbtif2, 0xFFFF);
|
|
stats->tx_packets++;
|
|
stats->tx_bytes += bfin_read(®->chl[TRANSMIT_CHL].dlc);
|
|
can_get_echo_skb(dev, 0);
|
|
netif_wake_queue(dev);
|
|
} else if ((irq == priv->rx_irq) && bfin_read(®->mbrif1)) {
|
|
/* receive interrupt */
|
|
isrc = bfin_read(®->mbrif1);
|
|
bfin_write(®->mbrif1, 0xFFFF);
|
|
bfin_can_rx(dev, isrc);
|
|
} else if ((irq == priv->err_irq) && bfin_read(®->gis)) {
|
|
/* error interrupt */
|
|
isrc = bfin_read(®->gis);
|
|
status = bfin_read(®->esr);
|
|
bfin_write(®->gis, 0x7FF);
|
|
bfin_can_err(dev, isrc, status);
|
|
} else {
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int bfin_can_open(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
int err;
|
|
|
|
/* set chip into reset mode */
|
|
bfin_can_set_reset_mode(dev);
|
|
|
|
/* common open */
|
|
err = open_candev(dev);
|
|
if (err)
|
|
goto exit_open;
|
|
|
|
/* register interrupt handler */
|
|
err = request_irq(priv->rx_irq, &bfin_can_interrupt, 0,
|
|
"bfin-can-rx", dev);
|
|
if (err)
|
|
goto exit_rx_irq;
|
|
err = request_irq(priv->tx_irq, &bfin_can_interrupt, 0,
|
|
"bfin-can-tx", dev);
|
|
if (err)
|
|
goto exit_tx_irq;
|
|
err = request_irq(priv->err_irq, &bfin_can_interrupt, 0,
|
|
"bfin-can-err", dev);
|
|
if (err)
|
|
goto exit_err_irq;
|
|
|
|
bfin_can_start(dev);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
|
|
exit_err_irq:
|
|
free_irq(priv->tx_irq, dev);
|
|
exit_tx_irq:
|
|
free_irq(priv->rx_irq, dev);
|
|
exit_rx_irq:
|
|
close_candev(dev);
|
|
exit_open:
|
|
return err;
|
|
}
|
|
|
|
static int bfin_can_close(struct net_device *dev)
|
|
{
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
bfin_can_set_reset_mode(dev);
|
|
|
|
close_candev(dev);
|
|
|
|
free_irq(priv->rx_irq, dev);
|
|
free_irq(priv->tx_irq, dev);
|
|
free_irq(priv->err_irq, dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device *alloc_bfin_candev(void)
|
|
{
|
|
struct net_device *dev;
|
|
struct bfin_can_priv *priv;
|
|
|
|
dev = alloc_candev(sizeof(*priv), TX_ECHO_SKB_MAX);
|
|
if (!dev)
|
|
return NULL;
|
|
|
|
priv = netdev_priv(dev);
|
|
|
|
priv->dev = dev;
|
|
priv->can.bittiming_const = &bfin_can_bittiming_const;
|
|
priv->can.do_set_bittiming = bfin_can_set_bittiming;
|
|
priv->can.do_set_mode = bfin_can_set_mode;
|
|
priv->can.do_get_berr_counter = bfin_can_get_berr_counter;
|
|
priv->can.ctrlmode_supported = CAN_CTRLMODE_3_SAMPLES;
|
|
|
|
return dev;
|
|
}
|
|
|
|
static const struct net_device_ops bfin_can_netdev_ops = {
|
|
.ndo_open = bfin_can_open,
|
|
.ndo_stop = bfin_can_close,
|
|
.ndo_start_xmit = bfin_can_start_xmit,
|
|
};
|
|
|
|
static int bfin_can_probe(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
struct net_device *dev;
|
|
struct bfin_can_priv *priv;
|
|
struct resource *res_mem, *rx_irq, *tx_irq, *err_irq;
|
|
unsigned short *pdata;
|
|
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev, "No platform data provided!\n");
|
|
err = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
rx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
tx_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 1);
|
|
err_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 2);
|
|
if (!res_mem || !rx_irq || !tx_irq || !err_irq) {
|
|
err = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
if (!request_mem_region(res_mem->start, resource_size(res_mem),
|
|
dev_name(&pdev->dev))) {
|
|
err = -EBUSY;
|
|
goto exit;
|
|
}
|
|
|
|
/* request peripheral pins */
|
|
err = peripheral_request_list(pdata, dev_name(&pdev->dev));
|
|
if (err)
|
|
goto exit_mem_release;
|
|
|
|
dev = alloc_bfin_candev();
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto exit_peri_pin_free;
|
|
}
|
|
|
|
priv = netdev_priv(dev);
|
|
priv->membase = (void __iomem *)res_mem->start;
|
|
priv->rx_irq = rx_irq->start;
|
|
priv->tx_irq = tx_irq->start;
|
|
priv->err_irq = err_irq->start;
|
|
priv->pin_list = pdata;
|
|
priv->can.clock.freq = get_sclk();
|
|
|
|
platform_set_drvdata(pdev, dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
dev->flags |= IFF_ECHO; /* we support local echo */
|
|
dev->netdev_ops = &bfin_can_netdev_ops;
|
|
|
|
bfin_can_set_reset_mode(dev);
|
|
|
|
err = register_candev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "registering failed (err=%d)\n", err);
|
|
goto exit_candev_free;
|
|
}
|
|
|
|
dev_info(&pdev->dev,
|
|
"%s device registered"
|
|
"(®_base=%p, rx_irq=%d, tx_irq=%d, err_irq=%d, sclk=%d)\n",
|
|
DRV_NAME, priv->membase, priv->rx_irq,
|
|
priv->tx_irq, priv->err_irq, priv->can.clock.freq);
|
|
return 0;
|
|
|
|
exit_candev_free:
|
|
free_candev(dev);
|
|
exit_peri_pin_free:
|
|
peripheral_free_list(pdata);
|
|
exit_mem_release:
|
|
release_mem_region(res_mem->start, resource_size(res_mem));
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int bfin_can_remove(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct resource *res;
|
|
|
|
bfin_can_set_reset_mode(dev);
|
|
|
|
unregister_candev(dev);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(res->start, resource_size(res));
|
|
|
|
peripheral_free_list(priv->pin_list);
|
|
|
|
free_candev(dev);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int bfin_can_suspend(struct platform_device *pdev, pm_message_t mesg)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
int timeout = BFIN_CAN_TIMEOUT;
|
|
|
|
if (netif_running(dev)) {
|
|
/* enter sleep mode */
|
|
bfin_write(®->control, bfin_read(®->control) | SMR);
|
|
SSYNC();
|
|
while (!(bfin_read(®->intr) & SMACK)) {
|
|
udelay(10);
|
|
if (--timeout == 0) {
|
|
netdev_err(dev, "fail to enter sleep mode\n");
|
|
BUG();
|
|
}
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bfin_can_resume(struct platform_device *pdev)
|
|
{
|
|
struct net_device *dev = platform_get_drvdata(pdev);
|
|
struct bfin_can_priv *priv = netdev_priv(dev);
|
|
struct bfin_can_regs __iomem *reg = priv->membase;
|
|
|
|
if (netif_running(dev)) {
|
|
/* leave sleep mode */
|
|
bfin_write(®->intr, 0);
|
|
SSYNC();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define bfin_can_suspend NULL
|
|
#define bfin_can_resume NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct platform_driver bfin_can_driver = {
|
|
.probe = bfin_can_probe,
|
|
.remove = bfin_can_remove,
|
|
.suspend = bfin_can_suspend,
|
|
.resume = bfin_can_resume,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.owner = THIS_MODULE,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(bfin_can_driver);
|
|
|
|
MODULE_AUTHOR("Barry Song <21cnbao@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Blackfin on-chip CAN netdevice driver");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|