mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-24 05:04:00 +08:00
781551df57
This patch adds support for bitstream configuration (programming / loading) of the Lattice ECP3 FPGA's via the SPI bus. Here an example on my custom MPC5200 based board: $ echo 1 > /sys/class/firmware/spi0.0/loading $ cat fpga_a4m2k.bit > /sys/class/firmware/spi0.0/data $ echo 0 > /sys/class/firmware/spi0.0/loading leads to these messages: lattice-ecp3 spi0.0: FPGA Lattice ECP3-35 detected lattice-ecp3 spi0.0: Configuring the FPGA... lattice-ecp3 spi0.0: FPGA succesfully configured! Signed-off-by: Stefan Roese <sr@denx.de> Acked-by: Ming Lei <ming.lei@canonical.com> Reviewed-by: Grant Likely <grant.likely@secretlab.ca> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
55 lines
2.0 KiB
Makefile
55 lines
2.0 KiB
Makefile
#
|
|
# Makefile for misc devices that really don't fit anywhere else.
|
|
#
|
|
|
|
obj-$(CONFIG_IBM_ASM) += ibmasm/
|
|
obj-$(CONFIG_AD525X_DPOT) += ad525x_dpot.o
|
|
obj-$(CONFIG_AD525X_DPOT_I2C) += ad525x_dpot-i2c.o
|
|
obj-$(CONFIG_AD525X_DPOT_SPI) += ad525x_dpot-spi.o
|
|
obj-$(CONFIG_INTEL_MID_PTI) += pti.o
|
|
obj-$(CONFIG_ATMEL_PWM) += atmel_pwm.o
|
|
obj-$(CONFIG_ATMEL_SSC) += atmel-ssc.o
|
|
obj-$(CONFIG_ATMEL_TCLIB) += atmel_tclib.o
|
|
obj-$(CONFIG_BMP085) += bmp085.o
|
|
obj-$(CONFIG_BMP085_I2C) += bmp085-i2c.o
|
|
obj-$(CONFIG_BMP085_SPI) += bmp085-spi.o
|
|
obj-$(CONFIG_ICS932S401) += ics932s401.o
|
|
obj-$(CONFIG_LKDTM) += lkdtm.o
|
|
obj-$(CONFIG_TIFM_CORE) += tifm_core.o
|
|
obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o
|
|
obj-$(CONFIG_PHANTOM) += phantom.o
|
|
obj-$(CONFIG_SENSORS_BH1780) += bh1780gli.o
|
|
obj-$(CONFIG_SENSORS_BH1770) += bh1770glc.o
|
|
obj-$(CONFIG_SENSORS_APDS990X) += apds990x.o
|
|
obj-$(CONFIG_SGI_IOC4) += ioc4.o
|
|
obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o
|
|
obj-$(CONFIG_KGDB_TESTS) += kgdbts.o
|
|
obj-$(CONFIG_SGI_XP) += sgi-xp/
|
|
obj-$(CONFIG_SGI_GRU) += sgi-gru/
|
|
obj-$(CONFIG_CS5535_MFGPT) += cs5535-mfgpt.o
|
|
obj-$(CONFIG_HP_ILO) += hpilo.o
|
|
obj-$(CONFIG_APDS9802ALS) += apds9802als.o
|
|
obj-$(CONFIG_ISL29003) += isl29003.o
|
|
obj-$(CONFIG_ISL29020) += isl29020.o
|
|
obj-$(CONFIG_SENSORS_TSL2550) += tsl2550.o
|
|
obj-$(CONFIG_EP93XX_PWM) += ep93xx_pwm.o
|
|
obj-$(CONFIG_DS1682) += ds1682.o
|
|
obj-$(CONFIG_TI_DAC7512) += ti_dac7512.o
|
|
obj-$(CONFIG_C2PORT) += c2port/
|
|
obj-$(CONFIG_HMC6352) += hmc6352.o
|
|
obj-y += eeprom/
|
|
obj-y += cb710/
|
|
obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
|
|
obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
|
|
obj-$(CONFIG_ARM_CHARLCD) += arm-charlcd.o
|
|
obj-$(CONFIG_PCH_PHUB) += pch_phub.o
|
|
obj-y += ti-st/
|
|
obj-y += lis3lv02d/
|
|
obj-y += carma/
|
|
obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
|
|
obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
|
|
obj-$(CONFIG_INTEL_MEI) += mei/
|
|
obj-$(CONFIG_MAX8997_MUIC) += max8997-muic.o
|
|
obj-$(CONFIG_VMWARE_VMCI) += vmw_vmci/
|
|
obj-$(CONFIG_LATTICE_ECP3_CONFIG) += lattice-ecp3-config.o
|