2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-22 12:14:01 +08:00
linux-next/drivers/usb/musb/tusb6010_omap.c
Peter Ujfalusi 6df2b42f7c usb: musb: tusb6010_omap: Do not reset the other direction's packet size
We have one register for each EP to set the maximum packet size for both
TX and RX.
If for example an RX programming would happen before the previous TX
transfer finishes we would reset the TX packet side.

To fix this issue, only modify the TX or RX part of the register.

Fixes: 550a7375fe ("USB: Add MUSB and TUSB support")
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Bin Liu <b-liu@ti.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-05-18 15:21:17 +02:00

715 lines
18 KiB
C

/*
* TUSB6010 USB 2.0 OTG Dual Role controller OMAP DMA interface
*
* Copyright (C) 2006 Nokia Corporation
* Tony Lindgren <tony@atomide.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/usb.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
#include <linux/omap-dma.h>
#include "musb_core.h"
#include "tusb6010.h"
#define to_chdat(c) ((struct tusb_omap_dma_ch *)(c)->private_data)
#define MAX_DMAREQ 5 /* REVISIT: Really 6, but req5 not OK */
#define OMAP24XX_DMA_EXT_DMAREQ0 2
#define OMAP24XX_DMA_EXT_DMAREQ1 3
#define OMAP242X_DMA_EXT_DMAREQ2 14
#define OMAP242X_DMA_EXT_DMAREQ3 15
#define OMAP242X_DMA_EXT_DMAREQ4 16
#define OMAP242X_DMA_EXT_DMAREQ5 64
struct tusb_omap_dma_ch {
struct musb *musb;
void __iomem *tbase;
unsigned long phys_offset;
int epnum;
u8 tx;
struct musb_hw_ep *hw_ep;
int ch;
s8 dmareq;
s8 sync_dev;
struct tusb_omap_dma *tusb_dma;
dma_addr_t dma_addr;
u32 len;
u16 packet_sz;
u16 transfer_packet_sz;
u32 transfer_len;
u32 completed_len;
};
struct tusb_omap_dma {
struct dma_controller controller;
void __iomem *tbase;
int ch;
s8 dmareq;
s8 sync_dev;
unsigned multichannel:1;
};
/*
* Allocate dmareq0 to the current channel unless it's already taken
*/
static inline int tusb_omap_use_shared_dmareq(struct tusb_omap_dma_ch *chdat)
{
u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
if (reg != 0) {
dev_dbg(chdat->musb->controller, "ep%i dmareq0 is busy for ep%i\n",
chdat->epnum, reg & 0xf);
return -EAGAIN;
}
if (chdat->tx)
reg = (1 << 4) | chdat->epnum;
else
reg = chdat->epnum;
musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
return 0;
}
static inline void tusb_omap_free_shared_dmareq(struct tusb_omap_dma_ch *chdat)
{
u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
if ((reg & 0xf) != chdat->epnum) {
printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
chdat->epnum, reg & 0xf);
return;
}
musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, 0);
}
/*
* See also musb_dma_completion in plat_uds.c and musb_g_[tx|rx]() in
* musb_gadget.c.
*/
static void tusb_omap_dma_cb(int lch, u16 ch_status, void *data)
{
struct dma_channel *channel = (struct dma_channel *)data;
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *ep_conf = hw_ep->conf;
void __iomem *mbase = musb->mregs;
unsigned long remaining, flags, pio;
int ch;
spin_lock_irqsave(&musb->lock, flags);
if (tusb_dma->multichannel)
ch = chdat->ch;
else
ch = tusb_dma->ch;
if (ch_status != OMAP_DMA_BLOCK_IRQ)
printk(KERN_ERR "TUSB DMA error status: %i\n", ch_status);
dev_dbg(musb->controller, "ep%i %s dma callback ch: %i status: %x\n",
chdat->epnum, chdat->tx ? "tx" : "rx",
ch, ch_status);
if (chdat->tx)
remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
else
remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
remaining = TUSB_EP_CONFIG_XFR_SIZE(remaining);
/* HW issue #10: XFR_SIZE may get corrupt on DMA (both async & sync) */
if (unlikely(remaining > chdat->transfer_len)) {
dev_dbg(musb->controller, "Corrupt %s dma ch%i XFR_SIZE: 0x%08lx\n",
chdat->tx ? "tx" : "rx", chdat->ch,
remaining);
remaining = 0;
}
channel->actual_len = chdat->transfer_len - remaining;
pio = chdat->len - channel->actual_len;
dev_dbg(musb->controller, "DMA remaining %lu/%u\n", remaining, chdat->transfer_len);
/* Transfer remaining 1 - 31 bytes */
if (pio > 0 && pio < 32) {
u8 *buf;
dev_dbg(musb->controller, "Using PIO for remaining %lu bytes\n", pio);
buf = phys_to_virt((u32)chdat->dma_addr) + chdat->transfer_len;
if (chdat->tx) {
dma_unmap_single(dev, chdat->dma_addr,
chdat->transfer_len,
DMA_TO_DEVICE);
musb_write_fifo(hw_ep, pio, buf);
} else {
dma_unmap_single(dev, chdat->dma_addr,
chdat->transfer_len,
DMA_FROM_DEVICE);
musb_read_fifo(hw_ep, pio, buf);
}
channel->actual_len += pio;
}
if (!tusb_dma->multichannel)
tusb_omap_free_shared_dmareq(chdat);
channel->status = MUSB_DMA_STATUS_FREE;
/* Handle only RX callbacks here. TX callbacks must be handled based
* on the TUSB DMA status interrupt.
* REVISIT: Use both TUSB DMA status interrupt and OMAP DMA callback
* interrupt for RX and TX.
*/
if (!chdat->tx)
musb_dma_completion(musb, chdat->epnum, chdat->tx);
/* We must terminate short tx transfers manually by setting TXPKTRDY.
* REVISIT: This same problem may occur with other MUSB dma as well.
* Easy to test with g_ether by pinging the MUSB board with ping -s54.
*/
if ((chdat->transfer_len < chdat->packet_sz)
|| (chdat->transfer_len % chdat->packet_sz != 0)) {
u16 csr;
if (chdat->tx) {
dev_dbg(musb->controller, "terminating short tx packet\n");
musb_ep_select(mbase, chdat->epnum);
csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_TXPKTRDY
| MUSB_TXCSR_P_WZC_BITS;
musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
}
}
spin_unlock_irqrestore(&musb->lock, flags);
}
static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
u8 rndis_mode, dma_addr_t dma_addr, u32 len)
{
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
struct musb *musb = chdat->musb;
struct device *dev = musb->controller;
struct musb_hw_ep *hw_ep = chdat->hw_ep;
void __iomem *mbase = musb->mregs;
void __iomem *ep_conf = hw_ep->conf;
dma_addr_t fifo = hw_ep->fifo_sync;
struct omap_dma_channel_params dma_params;
u32 dma_remaining;
int src_burst, dst_burst;
u16 csr;
u32 psize;
int ch;
s8 dmareq;
s8 sync_dev;
if (unlikely(dma_addr & 0x1) || (len < 32) || (len > packet_sz))
return false;
/*
* HW issue #10: Async dma will eventually corrupt the XFR_SIZE
* register which will cause missed DMA interrupt. We could try to
* use a timer for the callback, but it is unsafe as the XFR_SIZE
* register is corrupt, and we won't know if the DMA worked.
*/
if (dma_addr & 0x2)
return false;
/*
* Because of HW issue #10, it seems like mixing sync DMA and async
* PIO access can confuse the DMA. Make sure XFR_SIZE is reset before
* using the channel for DMA.
*/
if (chdat->tx)
dma_remaining = musb_readl(ep_conf, TUSB_EP_TX_OFFSET);
else
dma_remaining = musb_readl(ep_conf, TUSB_EP_RX_OFFSET);
dma_remaining = TUSB_EP_CONFIG_XFR_SIZE(dma_remaining);
if (dma_remaining) {
dev_dbg(musb->controller, "Busy %s dma ch%i, not using: %08x\n",
chdat->tx ? "tx" : "rx", chdat->ch,
dma_remaining);
return false;
}
chdat->transfer_len = len & ~0x1f;
if (len < packet_sz)
chdat->transfer_packet_sz = chdat->transfer_len;
else
chdat->transfer_packet_sz = packet_sz;
if (tusb_dma->multichannel) {
ch = chdat->ch;
dmareq = chdat->dmareq;
sync_dev = chdat->sync_dev;
} else {
if (tusb_omap_use_shared_dmareq(chdat) != 0) {
dev_dbg(musb->controller, "could not get dma for ep%i\n", chdat->epnum);
return false;
}
if (tusb_dma->ch < 0) {
/* REVISIT: This should get blocked earlier, happens
* with MSC ErrorRecoveryTest
*/
WARN_ON(1);
return false;
}
ch = tusb_dma->ch;
dmareq = tusb_dma->dmareq;
sync_dev = tusb_dma->sync_dev;
omap_set_dma_callback(ch, tusb_omap_dma_cb, channel);
}
chdat->packet_sz = packet_sz;
chdat->len = len;
channel->actual_len = 0;
chdat->dma_addr = dma_addr;
channel->status = MUSB_DMA_STATUS_BUSY;
/* Since we're recycling dma areas, we need to clean or invalidate */
if (chdat->tx)
dma_map_single(dev, phys_to_virt(dma_addr), len,
DMA_TO_DEVICE);
else
dma_map_single(dev, phys_to_virt(dma_addr), len,
DMA_FROM_DEVICE);
/* Use 16-bit transfer if dma_addr is not 32-bit aligned */
if ((dma_addr & 0x3) == 0) {
dma_params.data_type = OMAP_DMA_DATA_TYPE_S32;
dma_params.elem_count = 8; /* Elements in frame */
} else {
dma_params.data_type = OMAP_DMA_DATA_TYPE_S16;
dma_params.elem_count = 16; /* Elements in frame */
fifo = hw_ep->fifo_async;
}
dma_params.frame_count = chdat->transfer_len / 32; /* Burst sz frame */
dev_dbg(musb->controller, "ep%i %s dma ch%i dma: %pad len: %u(%u) packet_sz: %i(%i)\n",
chdat->epnum, chdat->tx ? "tx" : "rx",
ch, &dma_addr, chdat->transfer_len, len,
chdat->transfer_packet_sz, packet_sz);
/*
* Prepare omap DMA for transfer
*/
if (chdat->tx) {
dma_params.src_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.src_start = (unsigned long)dma_addr;
dma_params.src_ei = 0;
dma_params.src_fi = 0;
dma_params.dst_amode = OMAP_DMA_AMODE_DOUBLE_IDX;
dma_params.dst_start = (unsigned long)fifo;
dma_params.dst_ei = 1;
dma_params.dst_fi = -31; /* Loop 32 byte window */
dma_params.trigger = sync_dev;
dma_params.sync_mode = OMAP_DMA_SYNC_FRAME;
dma_params.src_or_dst_synch = 0; /* Dest sync */
src_burst = OMAP_DMA_DATA_BURST_16; /* 16x32 read */
dst_burst = OMAP_DMA_DATA_BURST_8; /* 8x32 write */
} else {
dma_params.src_amode = OMAP_DMA_AMODE_DOUBLE_IDX;
dma_params.src_start = (unsigned long)fifo;
dma_params.src_ei = 1;
dma_params.src_fi = -31; /* Loop 32 byte window */
dma_params.dst_amode = OMAP_DMA_AMODE_POST_INC;
dma_params.dst_start = (unsigned long)dma_addr;
dma_params.dst_ei = 0;
dma_params.dst_fi = 0;
dma_params.trigger = sync_dev;
dma_params.sync_mode = OMAP_DMA_SYNC_FRAME;
dma_params.src_or_dst_synch = 1; /* Source sync */
src_burst = OMAP_DMA_DATA_BURST_8; /* 8x32 read */
dst_burst = OMAP_DMA_DATA_BURST_16; /* 16x32 write */
}
dev_dbg(musb->controller, "ep%i %s using %i-bit %s dma from 0x%08lx to 0x%08lx\n",
chdat->epnum, chdat->tx ? "tx" : "rx",
(dma_params.data_type == OMAP_DMA_DATA_TYPE_S32) ? 32 : 16,
((dma_addr & 0x3) == 0) ? "sync" : "async",
dma_params.src_start, dma_params.dst_start);
omap_set_dma_params(ch, &dma_params);
omap_set_dma_src_burst_mode(ch, src_burst);
omap_set_dma_dest_burst_mode(ch, dst_burst);
omap_set_dma_write_mode(ch, OMAP_DMA_WRITE_LAST_NON_POSTED);
/*
* Prepare MUSB for DMA transfer
*/
if (chdat->tx) {
musb_ep_select(mbase, chdat->epnum);
csr = musb_readw(hw_ep->regs, MUSB_TXCSR);
csr |= (MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
csr &= ~MUSB_TXCSR_P_UNDERRUN;
musb_writew(hw_ep->regs, MUSB_TXCSR, csr);
} else {
musb_ep_select(mbase, chdat->epnum);
csr = musb_readw(hw_ep->regs, MUSB_RXCSR);
csr |= MUSB_RXCSR_DMAENAB;
csr &= ~(MUSB_RXCSR_AUTOCLEAR | MUSB_RXCSR_DMAMODE);
musb_writew(hw_ep->regs, MUSB_RXCSR,
csr | MUSB_RXCSR_P_WZC_BITS);
}
/*
* Start DMA transfer
*/
omap_start_dma(ch);
if (chdat->tx) {
/* Send transfer_packet_sz packets at a time */
psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
psize &= ~0x7ff;
psize |= chdat->transfer_packet_sz;
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
} else {
/* Receive transfer_packet_sz packets at a time */
psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
psize &= ~(0x7ff << 16);
psize |= (chdat->transfer_packet_sz << 16);
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
}
return true;
}
static int tusb_omap_dma_abort(struct dma_channel *channel)
{
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct tusb_omap_dma *tusb_dma = chdat->tusb_dma;
if (!tusb_dma->multichannel) {
if (tusb_dma->ch >= 0) {
omap_stop_dma(tusb_dma->ch);
omap_free_dma(tusb_dma->ch);
tusb_dma->ch = -1;
}
tusb_dma->dmareq = -1;
tusb_dma->sync_dev = -1;
}
channel->status = MUSB_DMA_STATUS_FREE;
return 0;
}
static inline int tusb_omap_dma_allocate_dmareq(struct tusb_omap_dma_ch *chdat)
{
u32 reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
int i, dmareq_nr = -1;
const int sync_dev[6] = {
OMAP24XX_DMA_EXT_DMAREQ0,
OMAP24XX_DMA_EXT_DMAREQ1,
OMAP242X_DMA_EXT_DMAREQ2,
OMAP242X_DMA_EXT_DMAREQ3,
OMAP242X_DMA_EXT_DMAREQ4,
OMAP242X_DMA_EXT_DMAREQ5,
};
for (i = 0; i < MAX_DMAREQ; i++) {
int cur = (reg & (0xf << (i * 5))) >> (i * 5);
if (cur == 0) {
dmareq_nr = i;
break;
}
}
if (dmareq_nr == -1)
return -EAGAIN;
reg |= (chdat->epnum << (dmareq_nr * 5));
if (chdat->tx)
reg |= ((1 << 4) << (dmareq_nr * 5));
musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
chdat->dmareq = dmareq_nr;
chdat->sync_dev = sync_dev[chdat->dmareq];
return 0;
}
static inline void tusb_omap_dma_free_dmareq(struct tusb_omap_dma_ch *chdat)
{
u32 reg;
if (!chdat || chdat->dmareq < 0)
return;
reg = musb_readl(chdat->tbase, TUSB_DMA_EP_MAP);
reg &= ~(0x1f << (chdat->dmareq * 5));
musb_writel(chdat->tbase, TUSB_DMA_EP_MAP, reg);
chdat->dmareq = -1;
chdat->sync_dev = -1;
}
static struct dma_channel *dma_channel_pool[MAX_DMAREQ];
static struct dma_channel *
tusb_omap_dma_allocate(struct dma_controller *c,
struct musb_hw_ep *hw_ep,
u8 tx)
{
int ret, i;
const char *dev_name;
struct tusb_omap_dma *tusb_dma;
struct musb *musb;
void __iomem *tbase;
struct dma_channel *channel = NULL;
struct tusb_omap_dma_ch *chdat = NULL;
u32 reg;
tusb_dma = container_of(c, struct tusb_omap_dma, controller);
musb = tusb_dma->controller.musb;
tbase = musb->ctrl_base;
reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
if (tx)
reg &= ~(1 << hw_ep->epnum);
else
reg &= ~(1 << (hw_ep->epnum + 15));
musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
/* REVISIT: Why does dmareq5 not work? */
if (hw_ep->epnum == 0) {
dev_dbg(musb->controller, "Not allowing DMA for ep0 %s\n", tx ? "tx" : "rx");
return NULL;
}
for (i = 0; i < MAX_DMAREQ; i++) {
struct dma_channel *ch = dma_channel_pool[i];
if (ch->status == MUSB_DMA_STATUS_UNKNOWN) {
ch->status = MUSB_DMA_STATUS_FREE;
channel = ch;
chdat = ch->private_data;
break;
}
}
if (!channel)
return NULL;
if (tx) {
chdat->tx = 1;
dev_name = "TUSB transmit";
} else {
chdat->tx = 0;
dev_name = "TUSB receive";
}
chdat->musb = tusb_dma->controller.musb;
chdat->tbase = tusb_dma->tbase;
chdat->hw_ep = hw_ep;
chdat->epnum = hw_ep->epnum;
chdat->dmareq = -1;
chdat->completed_len = 0;
chdat->tusb_dma = tusb_dma;
channel->max_len = 0x7fffffff;
channel->desired_mode = 0;
channel->actual_len = 0;
if (tusb_dma->multichannel) {
ret = tusb_omap_dma_allocate_dmareq(chdat);
if (ret != 0)
goto free_dmareq;
ret = omap_request_dma(chdat->sync_dev, dev_name,
tusb_omap_dma_cb, channel, &chdat->ch);
if (ret != 0)
goto free_dmareq;
} else if (tusb_dma->ch == -1) {
tusb_dma->dmareq = 0;
tusb_dma->sync_dev = OMAP24XX_DMA_EXT_DMAREQ0;
/* Callback data gets set later in the shared dmareq case */
ret = omap_request_dma(tusb_dma->sync_dev, "TUSB shared",
tusb_omap_dma_cb, NULL, &tusb_dma->ch);
if (ret != 0)
goto free_dmareq;
chdat->dmareq = -1;
chdat->ch = -1;
}
dev_dbg(musb->controller, "ep%i %s dma: %s dma%i dmareq%i sync%i\n",
chdat->epnum,
chdat->tx ? "tx" : "rx",
chdat->ch >= 0 ? "dedicated" : "shared",
chdat->ch >= 0 ? chdat->ch : tusb_dma->ch,
chdat->dmareq >= 0 ? chdat->dmareq : tusb_dma->dmareq,
chdat->sync_dev >= 0 ? chdat->sync_dev : tusb_dma->sync_dev);
return channel;
free_dmareq:
tusb_omap_dma_free_dmareq(chdat);
dev_dbg(musb->controller, "ep%i: Could not get a DMA channel\n", chdat->epnum);
channel->status = MUSB_DMA_STATUS_UNKNOWN;
return NULL;
}
static void tusb_omap_dma_release(struct dma_channel *channel)
{
struct tusb_omap_dma_ch *chdat = to_chdat(channel);
struct musb *musb = chdat->musb;
void __iomem *tbase = musb->ctrl_base;
u32 reg;
dev_dbg(musb->controller, "ep%i ch%i\n", chdat->epnum, chdat->ch);
reg = musb_readl(tbase, TUSB_DMA_INT_MASK);
if (chdat->tx)
reg |= (1 << chdat->epnum);
else
reg |= (1 << (chdat->epnum + 15));
musb_writel(tbase, TUSB_DMA_INT_MASK, reg);
reg = musb_readl(tbase, TUSB_DMA_INT_CLEAR);
if (chdat->tx)
reg |= (1 << chdat->epnum);
else
reg |= (1 << (chdat->epnum + 15));
musb_writel(tbase, TUSB_DMA_INT_CLEAR, reg);
channel->status = MUSB_DMA_STATUS_UNKNOWN;
if (chdat->ch >= 0) {
omap_stop_dma(chdat->ch);
omap_free_dma(chdat->ch);
chdat->ch = -1;
}
if (chdat->dmareq >= 0)
tusb_omap_dma_free_dmareq(chdat);
channel = NULL;
}
void tusb_dma_controller_destroy(struct dma_controller *c)
{
struct tusb_omap_dma *tusb_dma;
int i;
tusb_dma = container_of(c, struct tusb_omap_dma, controller);
for (i = 0; i < MAX_DMAREQ; i++) {
struct dma_channel *ch = dma_channel_pool[i];
if (ch) {
kfree(ch->private_data);
kfree(ch);
}
}
if (tusb_dma && !tusb_dma->multichannel && tusb_dma->ch >= 0)
omap_free_dma(tusb_dma->ch);
kfree(tusb_dma);
}
EXPORT_SYMBOL_GPL(tusb_dma_controller_destroy);
struct dma_controller *
tusb_dma_controller_create(struct musb *musb, void __iomem *base)
{
void __iomem *tbase = musb->ctrl_base;
struct tusb_omap_dma *tusb_dma;
int i;
/* REVISIT: Get dmareq lines used from board-*.c */
musb_writel(musb->ctrl_base, TUSB_DMA_INT_MASK, 0x7fffffff);
musb_writel(musb->ctrl_base, TUSB_DMA_EP_MAP, 0);
musb_writel(tbase, TUSB_DMA_REQ_CONF,
TUSB_DMA_REQ_CONF_BURST_SIZE(2)
| TUSB_DMA_REQ_CONF_DMA_REQ_EN(0x3f)
| TUSB_DMA_REQ_CONF_DMA_REQ_ASSER(2));
tusb_dma = kzalloc(sizeof(struct tusb_omap_dma), GFP_KERNEL);
if (!tusb_dma)
goto out;
tusb_dma->controller.musb = musb;
tusb_dma->tbase = musb->ctrl_base;
tusb_dma->ch = -1;
tusb_dma->dmareq = -1;
tusb_dma->sync_dev = -1;
tusb_dma->controller.channel_alloc = tusb_omap_dma_allocate;
tusb_dma->controller.channel_release = tusb_omap_dma_release;
tusb_dma->controller.channel_program = tusb_omap_dma_program;
tusb_dma->controller.channel_abort = tusb_omap_dma_abort;
if (musb->tusb_revision >= TUSB_REV_30)
tusb_dma->multichannel = 1;
for (i = 0; i < MAX_DMAREQ; i++) {
struct dma_channel *ch;
struct tusb_omap_dma_ch *chdat;
ch = kzalloc(sizeof(struct dma_channel), GFP_KERNEL);
if (!ch)
goto cleanup;
dma_channel_pool[i] = ch;
chdat = kzalloc(sizeof(struct tusb_omap_dma_ch), GFP_KERNEL);
if (!chdat)
goto cleanup;
ch->status = MUSB_DMA_STATUS_UNKNOWN;
ch->private_data = chdat;
}
return &tusb_dma->controller;
cleanup:
musb_dma_controller_destroy(&tusb_dma->controller);
out:
return NULL;
}
EXPORT_SYMBOL_GPL(tusb_dma_controller_create);