2
0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-23 04:34:11 +08:00
linux-next/drivers/net/ethernet/broadcom/bgmac.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

616 lines
22 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef _BGMAC_H
#define _BGMAC_H
#include <linux/netdevice.h>
#define BGMAC_DEV_CTL 0x000
#define BGMAC_DC_TSM 0x00000002
#define BGMAC_DC_CFCO 0x00000004
#define BGMAC_DC_RLSS 0x00000008
#define BGMAC_DC_MROR 0x00000010
#define BGMAC_DC_FCM_MASK 0x00000060
#define BGMAC_DC_FCM_SHIFT 5
#define BGMAC_DC_NAE 0x00000080
#define BGMAC_DC_TF 0x00000100
#define BGMAC_DC_RDS_MASK 0x00030000
#define BGMAC_DC_RDS_SHIFT 16
#define BGMAC_DC_TDS_MASK 0x000c0000
#define BGMAC_DC_TDS_SHIFT 18
#define BGMAC_DEV_STATUS 0x004 /* Configuration of the interface */
#define BGMAC_DS_RBF 0x00000001
#define BGMAC_DS_RDF 0x00000002
#define BGMAC_DS_RIF 0x00000004
#define BGMAC_DS_TBF 0x00000008
#define BGMAC_DS_TDF 0x00000010
#define BGMAC_DS_TIF 0x00000020
#define BGMAC_DS_PO 0x00000040
#define BGMAC_DS_MM_MASK 0x00000300 /* Mode of the interface */
#define BGMAC_DS_MM_SHIFT 8
#define BGMAC_BIST_STATUS 0x00c
#define BGMAC_INT_STATUS 0x020 /* Interrupt status */
#define BGMAC_IS_MRO 0x00000001
#define BGMAC_IS_MTO 0x00000002
#define BGMAC_IS_TFD 0x00000004
#define BGMAC_IS_LS 0x00000008
#define BGMAC_IS_MDIO 0x00000010
#define BGMAC_IS_MR 0x00000020
#define BGMAC_IS_MT 0x00000040
#define BGMAC_IS_TO 0x00000080
#define BGMAC_IS_DESC_ERR 0x00000400 /* Descriptor error */
#define BGMAC_IS_DATA_ERR 0x00000800 /* Data error */
#define BGMAC_IS_DESC_PROT_ERR 0x00001000 /* Descriptor protocol error */
#define BGMAC_IS_RX_DESC_UNDERF 0x00002000 /* Receive descriptor underflow */
#define BGMAC_IS_RX_F_OVERF 0x00004000 /* Receive FIFO overflow */
#define BGMAC_IS_TX_F_UNDERF 0x00008000 /* Transmit FIFO underflow */
#define BGMAC_IS_RX 0x00010000 /* Interrupt for RX queue 0 */
#define BGMAC_IS_TX0 0x01000000 /* Interrupt for TX queue 0 */
#define BGMAC_IS_TX1 0x02000000 /* Interrupt for TX queue 1 */
#define BGMAC_IS_TX2 0x04000000 /* Interrupt for TX queue 2 */
#define BGMAC_IS_TX3 0x08000000 /* Interrupt for TX queue 3 */
#define BGMAC_IS_TX_MASK 0x0f000000
#define BGMAC_IS_INTMASK 0x0f01fcff
#define BGMAC_IS_ERRMASK 0x0000fc00
#define BGMAC_INT_MASK 0x024 /* Interrupt mask */
#define BGMAC_GP_TIMER 0x028
#define BGMAC_INT_RECV_LAZY 0x100
#define BGMAC_IRL_TO_MASK 0x00ffffff
#define BGMAC_IRL_FC_MASK 0xff000000
#define BGMAC_IRL_FC_SHIFT 24 /* Shift the number of interrupts triggered per received frame */
#define BGMAC_FLOW_CTL_THRESH 0x104 /* Flow control thresholds */
#define BGMAC_WRRTHRESH 0x108
#define BGMAC_GMAC_IDLE_CNT_THRESH 0x10c
#define BGMAC_PHY_ACCESS 0x180 /* PHY access address */
#define BGMAC_PA_DATA_MASK 0x0000ffff
#define BGMAC_PA_ADDR_MASK 0x001f0000
#define BGMAC_PA_ADDR_SHIFT 16
#define BGMAC_PA_REG_MASK 0x1f000000
#define BGMAC_PA_REG_SHIFT 24
#define BGMAC_PA_WRITE 0x20000000
#define BGMAC_PA_START 0x40000000
#define BGMAC_PHY_CNTL 0x188 /* PHY control address */
#define BGMAC_PC_EPA_MASK 0x0000001f
#define BGMAC_PC_MCT_MASK 0x007f0000
#define BGMAC_PC_MCT_SHIFT 16
#define BGMAC_PC_MTE 0x00800000
#define BGMAC_TXQ_CTL 0x18c
#define BGMAC_TXQ_CTL_DBT_MASK 0x00000fff
#define BGMAC_TXQ_CTL_DBT_SHIFT 0
#define BGMAC_RXQ_CTL 0x190
#define BGMAC_RXQ_CTL_DBT_MASK 0x00000fff
#define BGMAC_RXQ_CTL_DBT_SHIFT 0
#define BGMAC_RXQ_CTL_PTE 0x00001000
#define BGMAC_RXQ_CTL_MDP_MASK 0x3f000000
#define BGMAC_RXQ_CTL_MDP_SHIFT 24
#define BGMAC_GPIO_SELECT 0x194
#define BGMAC_GPIO_OUTPUT_EN 0x198
/* For 0x1e0 see BCMA_CLKCTLST. Below are BGMAC specific bits */
#define BGMAC_BCMA_CLKCTLST_MISC_PLL_REQ 0x00000100
#define BGMAC_BCMA_CLKCTLST_MISC_PLL_ST 0x01000000
#define BGMAC_HW_WAR 0x1e4
#define BGMAC_PWR_CTL 0x1e8
#define BGMAC_DMA_BASE0 0x200 /* Tx and Rx controller */
#define BGMAC_DMA_BASE1 0x240 /* Tx controller only */
#define BGMAC_DMA_BASE2 0x280 /* Tx controller only */
#define BGMAC_DMA_BASE3 0x2C0 /* Tx controller only */
#define BGMAC_TX_GOOD_OCTETS 0x300
#define BGMAC_TX_GOOD_OCTETS_HIGH 0x304
#define BGMAC_TX_GOOD_PKTS 0x308
#define BGMAC_TX_OCTETS 0x30c
#define BGMAC_TX_OCTETS_HIGH 0x310
#define BGMAC_TX_PKTS 0x314
#define BGMAC_TX_BROADCAST_PKTS 0x318
#define BGMAC_TX_MULTICAST_PKTS 0x31c
#define BGMAC_TX_LEN_64 0x320
#define BGMAC_TX_LEN_65_TO_127 0x324
#define BGMAC_TX_LEN_128_TO_255 0x328
#define BGMAC_TX_LEN_256_TO_511 0x32c
#define BGMAC_TX_LEN_512_TO_1023 0x330
#define BGMAC_TX_LEN_1024_TO_1522 0x334
#define BGMAC_TX_LEN_1523_TO_2047 0x338
#define BGMAC_TX_LEN_2048_TO_4095 0x33c
#define BGMAC_TX_LEN_4096_TO_8191 0x340
#define BGMAC_TX_LEN_8192_TO_MAX 0x344
#define BGMAC_TX_JABBER_PKTS 0x348 /* Error */
#define BGMAC_TX_OVERSIZE_PKTS 0x34c /* Error */
#define BGMAC_TX_FRAGMENT_PKTS 0x350
#define BGMAC_TX_UNDERRUNS 0x354 /* Error */
#define BGMAC_TX_TOTAL_COLS 0x358
#define BGMAC_TX_SINGLE_COLS 0x35c
#define BGMAC_TX_MULTIPLE_COLS 0x360
#define BGMAC_TX_EXCESSIVE_COLS 0x364 /* Error */
#define BGMAC_TX_LATE_COLS 0x368 /* Error */
#define BGMAC_TX_DEFERED 0x36c
#define BGMAC_TX_CARRIER_LOST 0x370
#define BGMAC_TX_PAUSE_PKTS 0x374
#define BGMAC_TX_UNI_PKTS 0x378
#define BGMAC_TX_Q0_PKTS 0x37c
#define BGMAC_TX_Q0_OCTETS 0x380
#define BGMAC_TX_Q0_OCTETS_HIGH 0x384
#define BGMAC_TX_Q1_PKTS 0x388
#define BGMAC_TX_Q1_OCTETS 0x38c
#define BGMAC_TX_Q1_OCTETS_HIGH 0x390
#define BGMAC_TX_Q2_PKTS 0x394
#define BGMAC_TX_Q2_OCTETS 0x398
#define BGMAC_TX_Q2_OCTETS_HIGH 0x39c
#define BGMAC_TX_Q3_PKTS 0x3a0
#define BGMAC_TX_Q3_OCTETS 0x3a4
#define BGMAC_TX_Q3_OCTETS_HIGH 0x3a8
#define BGMAC_RX_GOOD_OCTETS 0x3b0
#define BGMAC_RX_GOOD_OCTETS_HIGH 0x3b4
#define BGMAC_RX_GOOD_PKTS 0x3b8
#define BGMAC_RX_OCTETS 0x3bc
#define BGMAC_RX_OCTETS_HIGH 0x3c0
#define BGMAC_RX_PKTS 0x3c4
#define BGMAC_RX_BROADCAST_PKTS 0x3c8
#define BGMAC_RX_MULTICAST_PKTS 0x3cc
#define BGMAC_RX_LEN_64 0x3d0
#define BGMAC_RX_LEN_65_TO_127 0x3d4
#define BGMAC_RX_LEN_128_TO_255 0x3d8
#define BGMAC_RX_LEN_256_TO_511 0x3dc
#define BGMAC_RX_LEN_512_TO_1023 0x3e0
#define BGMAC_RX_LEN_1024_TO_1522 0x3e4
#define BGMAC_RX_LEN_1523_TO_2047 0x3e8
#define BGMAC_RX_LEN_2048_TO_4095 0x3ec
#define BGMAC_RX_LEN_4096_TO_8191 0x3f0
#define BGMAC_RX_LEN_8192_TO_MAX 0x3f4
#define BGMAC_RX_JABBER_PKTS 0x3f8 /* Error */
#define BGMAC_RX_OVERSIZE_PKTS 0x3fc /* Error */
#define BGMAC_RX_FRAGMENT_PKTS 0x400
#define BGMAC_RX_MISSED_PKTS 0x404 /* Error */
#define BGMAC_RX_CRC_ALIGN_ERRS 0x408 /* Error */
#define BGMAC_RX_UNDERSIZE 0x40c /* Error */
#define BGMAC_RX_CRC_ERRS 0x410 /* Error */
#define BGMAC_RX_ALIGN_ERRS 0x414 /* Error */
#define BGMAC_RX_SYMBOL_ERRS 0x418 /* Error */
#define BGMAC_RX_PAUSE_PKTS 0x41c
#define BGMAC_RX_NONPAUSE_PKTS 0x420
#define BGMAC_RX_SACHANGES 0x424
#define BGMAC_RX_UNI_PKTS 0x428
#define BGMAC_UNIMAC_VERSION 0x800
#define BGMAC_HDBKP_CTL 0x804
#define BGMAC_CMDCFG 0x808 /* Configuration */
#define BGMAC_CMDCFG_TE 0x00000001 /* Set to activate TX */
#define BGMAC_CMDCFG_RE 0x00000002 /* Set to activate RX */
#define BGMAC_CMDCFG_ES_MASK 0x0000000c /* Ethernet speed see gmac_speed */
#define BGMAC_CMDCFG_ES_10 0x00000000
#define BGMAC_CMDCFG_ES_100 0x00000004
#define BGMAC_CMDCFG_ES_1000 0x00000008
#define BGMAC_CMDCFG_ES_2500 0x0000000C
#define BGMAC_CMDCFG_PROM 0x00000010 /* Set to activate promiscuous mode */
#define BGMAC_CMDCFG_PAD_EN 0x00000020
#define BGMAC_CMDCFG_CF 0x00000040
#define BGMAC_CMDCFG_PF 0x00000080
#define BGMAC_CMDCFG_RPI 0x00000100 /* Unset to enable 802.3x tx flow control */
#define BGMAC_CMDCFG_TAI 0x00000200
#define BGMAC_CMDCFG_HD 0x00000400 /* Set if in half duplex mode */
#define BGMAC_CMDCFG_HD_SHIFT 10
#define BGMAC_CMDCFG_SR_REV0 0x00000800 /* Set to reset mode, for core rev 0-3 */
#define BGMAC_CMDCFG_SR_REV4 0x00002000 /* Set to reset mode, for core rev >= 4 */
#define BGMAC_CMDCFG_ML 0x00008000 /* Set to activate mac loopback mode */
#define BGMAC_CMDCFG_AE 0x00400000
#define BGMAC_CMDCFG_CFE 0x00800000
#define BGMAC_CMDCFG_NLC 0x01000000
#define BGMAC_CMDCFG_RL 0x02000000
#define BGMAC_CMDCFG_RED 0x04000000
#define BGMAC_CMDCFG_PE 0x08000000
#define BGMAC_CMDCFG_TPI 0x10000000
#define BGMAC_CMDCFG_AT 0x20000000
#define BGMAC_MACADDR_HIGH 0x80c /* High 4 octets of own mac address */
#define BGMAC_MACADDR_LOW 0x810 /* Low 2 octets of own mac address */
#define BGMAC_RXMAX_LENGTH 0x814 /* Max receive frame length with vlan tag */
#define BGMAC_PAUSEQUANTA 0x818
#define BGMAC_MAC_MODE 0x844
#define BGMAC_OUTERTAG 0x848
#define BGMAC_INNERTAG 0x84c
#define BGMAC_TXIPG 0x85c
#define BGMAC_PAUSE_CTL 0xb30
#define BGMAC_TX_FLUSH 0xb34
#define BGMAC_RX_STATUS 0xb38
#define BGMAC_TX_STATUS 0xb3c
/* BCMA GMAC core specific IO Control (BCMA_IOCTL) flags */
#define BGMAC_BCMA_IOCTL_SW_CLKEN 0x00000004 /* PHY Clock Enable */
#define BGMAC_BCMA_IOCTL_SW_RESET 0x00000008 /* PHY Reset */
/* The IOCTL values appear to be different in NS, NSP, and NS2, and do not match
* the values directly above
*/
#define BGMAC_CLK_EN BIT(0)
#define BGMAC_RESERVED_0 BIT(1)
#define BGMAC_SOURCE_SYNC_MODE_EN BIT(2)
#define BGMAC_DEST_SYNC_MODE_EN BIT(3)
#define BGMAC_TX_CLK_OUT_INVERT_EN BIT(4)
#define BGMAC_DIRECT_GMII_MODE BIT(5)
#define BGMAC_CLK_250_SEL BIT(6)
#define BGMAC_AWCACHE (0xf << 7)
#define BGMAC_RESERVED_1 (0x1f << 11)
#define BGMAC_ARCACHE (0xf << 16)
#define BGMAC_AWUSER (0x3f << 20)
#define BGMAC_ARUSER (0x3f << 26)
#define BGMAC_RESERVED BIT(31)
/* BCMA GMAC core specific IO status (BCMA_IOST) flags */
#define BGMAC_BCMA_IOST_ATTACHED 0x00000800
#define BGMAC_NUM_MIB_TX_REGS \
(((BGMAC_TX_Q3_OCTETS_HIGH - BGMAC_TX_GOOD_OCTETS) / 4) + 1)
#define BGMAC_NUM_MIB_RX_REGS \
(((BGMAC_RX_UNI_PKTS - BGMAC_RX_GOOD_OCTETS) / 4) + 1)
#define BGMAC_DMA_TX_CTL 0x00
#define BGMAC_DMA_TX_ENABLE 0x00000001
#define BGMAC_DMA_TX_SUSPEND 0x00000002
#define BGMAC_DMA_TX_LOOPBACK 0x00000004
#define BGMAC_DMA_TX_FLUSH 0x00000010
#define BGMAC_DMA_TX_MR_MASK 0x000000C0 /* Multiple outstanding reads */
#define BGMAC_DMA_TX_MR_SHIFT 6
#define BGMAC_DMA_TX_MR_1 0
#define BGMAC_DMA_TX_MR_2 1
#define BGMAC_DMA_TX_PARITY_DISABLE 0x00000800
#define BGMAC_DMA_TX_ADDREXT_MASK 0x00030000
#define BGMAC_DMA_TX_ADDREXT_SHIFT 16
#define BGMAC_DMA_TX_BL_MASK 0x001C0000 /* BurstLen bits */
#define BGMAC_DMA_TX_BL_SHIFT 18
#define BGMAC_DMA_TX_BL_16 0
#define BGMAC_DMA_TX_BL_32 1
#define BGMAC_DMA_TX_BL_64 2
#define BGMAC_DMA_TX_BL_128 3
#define BGMAC_DMA_TX_BL_256 4
#define BGMAC_DMA_TX_BL_512 5
#define BGMAC_DMA_TX_BL_1024 6
#define BGMAC_DMA_TX_PC_MASK 0x00E00000 /* Prefetch control */
#define BGMAC_DMA_TX_PC_SHIFT 21
#define BGMAC_DMA_TX_PC_0 0
#define BGMAC_DMA_TX_PC_4 1
#define BGMAC_DMA_TX_PC_8 2
#define BGMAC_DMA_TX_PC_16 3
#define BGMAC_DMA_TX_PT_MASK 0x03000000 /* Prefetch threshold */
#define BGMAC_DMA_TX_PT_SHIFT 24
#define BGMAC_DMA_TX_PT_1 0
#define BGMAC_DMA_TX_PT_2 1
#define BGMAC_DMA_TX_PT_4 2
#define BGMAC_DMA_TX_PT_8 3
#define BGMAC_DMA_TX_INDEX 0x04
#define BGMAC_DMA_TX_RINGLO 0x08
#define BGMAC_DMA_TX_RINGHI 0x0C
#define BGMAC_DMA_TX_STATUS 0x10
#define BGMAC_DMA_TX_STATDPTR 0x00001FFF
#define BGMAC_DMA_TX_STAT 0xF0000000
#define BGMAC_DMA_TX_STAT_DISABLED 0x00000000
#define BGMAC_DMA_TX_STAT_ACTIVE 0x10000000
#define BGMAC_DMA_TX_STAT_IDLEWAIT 0x20000000
#define BGMAC_DMA_TX_STAT_STOPPED 0x30000000
#define BGMAC_DMA_TX_STAT_SUSP 0x40000000
#define BGMAC_DMA_TX_ERROR 0x14
#define BGMAC_DMA_TX_ERRDPTR 0x0001FFFF
#define BGMAC_DMA_TX_ERR 0xF0000000
#define BGMAC_DMA_TX_ERR_NOERR 0x00000000
#define BGMAC_DMA_TX_ERR_PROT 0x10000000
#define BGMAC_DMA_TX_ERR_UNDERRUN 0x20000000
#define BGMAC_DMA_TX_ERR_TRANSFER 0x30000000
#define BGMAC_DMA_TX_ERR_DESCREAD 0x40000000
#define BGMAC_DMA_TX_ERR_CORE 0x50000000
#define BGMAC_DMA_RX_CTL 0x20
#define BGMAC_DMA_RX_ENABLE 0x00000001
#define BGMAC_DMA_RX_FRAME_OFFSET_MASK 0x000000FE
#define BGMAC_DMA_RX_FRAME_OFFSET_SHIFT 1
#define BGMAC_DMA_RX_DIRECT_FIFO 0x00000100
#define BGMAC_DMA_RX_OVERFLOW_CONT 0x00000400
#define BGMAC_DMA_RX_PARITY_DISABLE 0x00000800
#define BGMAC_DMA_RX_MR_MASK 0x000000C0 /* Multiple outstanding reads */
#define BGMAC_DMA_RX_MR_SHIFT 6
#define BGMAC_DMA_TX_MR_1 0
#define BGMAC_DMA_TX_MR_2 1
#define BGMAC_DMA_RX_ADDREXT_MASK 0x00030000
#define BGMAC_DMA_RX_ADDREXT_SHIFT 16
#define BGMAC_DMA_RX_BL_MASK 0x001C0000 /* BurstLen bits */
#define BGMAC_DMA_RX_BL_SHIFT 18
#define BGMAC_DMA_RX_BL_16 0
#define BGMAC_DMA_RX_BL_32 1
#define BGMAC_DMA_RX_BL_64 2
#define BGMAC_DMA_RX_BL_128 3
#define BGMAC_DMA_RX_BL_256 4
#define BGMAC_DMA_RX_BL_512 5
#define BGMAC_DMA_RX_BL_1024 6
#define BGMAC_DMA_RX_PC_MASK 0x00E00000 /* Prefetch control */
#define BGMAC_DMA_RX_PC_SHIFT 21
#define BGMAC_DMA_RX_PC_0 0
#define BGMAC_DMA_RX_PC_4 1
#define BGMAC_DMA_RX_PC_8 2
#define BGMAC_DMA_RX_PC_16 3
#define BGMAC_DMA_RX_PT_MASK 0x03000000 /* Prefetch threshold */
#define BGMAC_DMA_RX_PT_SHIFT 24
#define BGMAC_DMA_RX_PT_1 0
#define BGMAC_DMA_RX_PT_2 1
#define BGMAC_DMA_RX_PT_4 2
#define BGMAC_DMA_RX_PT_8 3
#define BGMAC_DMA_RX_INDEX 0x24
#define BGMAC_DMA_RX_RINGLO 0x28
#define BGMAC_DMA_RX_RINGHI 0x2C
#define BGMAC_DMA_RX_STATUS 0x30
#define BGMAC_DMA_RX_STATDPTR 0x00001FFF
#define BGMAC_DMA_RX_STAT 0xF0000000
#define BGMAC_DMA_RX_STAT_DISABLED 0x00000000
#define BGMAC_DMA_RX_STAT_ACTIVE 0x10000000
#define BGMAC_DMA_RX_STAT_IDLEWAIT 0x20000000
#define BGMAC_DMA_RX_STAT_STOPPED 0x30000000
#define BGMAC_DMA_RX_STAT_SUSP 0x40000000
#define BGMAC_DMA_RX_ERROR 0x34
#define BGMAC_DMA_RX_ERRDPTR 0x0001FFFF
#define BGMAC_DMA_RX_ERR 0xF0000000
#define BGMAC_DMA_RX_ERR_NOERR 0x00000000
#define BGMAC_DMA_RX_ERR_PROT 0x10000000
#define BGMAC_DMA_RX_ERR_UNDERRUN 0x20000000
#define BGMAC_DMA_RX_ERR_TRANSFER 0x30000000
#define BGMAC_DMA_RX_ERR_DESCREAD 0x40000000
#define BGMAC_DMA_RX_ERR_CORE 0x50000000
#define BGMAC_DESC_CTL0_EOT 0x10000000 /* End of ring */
#define BGMAC_DESC_CTL0_IOC 0x20000000 /* IRQ on complete */
#define BGMAC_DESC_CTL0_EOF 0x40000000 /* End of frame */
#define BGMAC_DESC_CTL0_SOF 0x80000000 /* Start of frame */
#define BGMAC_DESC_CTL1_LEN 0x00001FFF
#define BGMAC_PHY_NOREGS BRCM_PSEUDO_PHY_ADDR
#define BGMAC_PHY_MASK 0x1F
#define BGMAC_MAX_TX_RINGS 4
#define BGMAC_MAX_RX_RINGS 1
#define BGMAC_TX_RING_SLOTS 128
#define BGMAC_RX_RING_SLOTS 512
#define BGMAC_RX_HEADER_LEN 28 /* Last 24 bytes are unused. Well... */
#define BGMAC_RX_FRAME_OFFSET 30 /* There are 2 unused bytes between header and real data */
#define BGMAC_RX_BUF_OFFSET (NET_SKB_PAD + NET_IP_ALIGN - \
BGMAC_RX_FRAME_OFFSET)
#define BGMAC_RX_MAX_FRAME_SIZE 1536 /* Copied from b44/tg3 */
#define BGMAC_RX_BUF_SIZE (BGMAC_RX_FRAME_OFFSET + BGMAC_RX_MAX_FRAME_SIZE)
#define BGMAC_RX_ALLOC_SIZE (SKB_DATA_ALIGN(BGMAC_RX_BUF_SIZE + BGMAC_RX_BUF_OFFSET) + \
SKB_DATA_ALIGN(sizeof(struct skb_shared_info)))
#define BGMAC_BFL_ENETROBO 0x0010 /* has ephy roboswitch spi */
#define BGMAC_BFL_ENETADM 0x0080 /* has ADMtek switch */
#define BGMAC_BFL_ENETVLAN 0x0100 /* can do vlan */
#define BGMAC_CHIPCTL_1_IF_TYPE_MASK 0x00000030
#define BGMAC_CHIPCTL_1_IF_TYPE_RMII 0x00000000
#define BGMAC_CHIPCTL_1_IF_TYPE_MII 0x00000010
#define BGMAC_CHIPCTL_1_IF_TYPE_RGMII 0x00000020
#define BGMAC_CHIPCTL_1_SW_TYPE_MASK 0x000000C0
#define BGMAC_CHIPCTL_1_SW_TYPE_EPHY 0x00000000
#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYMII 0x00000040
#define BGMAC_CHIPCTL_1_SW_TYPE_EPHYRMII 0x00000080
#define BGMAC_CHIPCTL_1_SW_TYPE_RGMII 0x000000C0
#define BGMAC_CHIPCTL_1_RXC_DLL_BYPASS 0x00010000
#define BGMAC_CHIPCTL_4_IF_TYPE_MASK 0x00003000
#define BGMAC_CHIPCTL_4_IF_TYPE_RMII 0x00000000
#define BGMAC_CHIPCTL_4_IF_TYPE_MII 0x00001000
#define BGMAC_CHIPCTL_4_IF_TYPE_RGMII 0x00002000
#define BGMAC_CHIPCTL_4_SW_TYPE_MASK 0x0000C000
#define BGMAC_CHIPCTL_4_SW_TYPE_EPHY 0x00000000
#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYMII 0x00004000
#define BGMAC_CHIPCTL_4_SW_TYPE_EPHYRMII 0x00008000
#define BGMAC_CHIPCTL_4_SW_TYPE_RGMII 0x0000C000
#define BGMAC_CHIPCTL_7_IF_TYPE_MASK 0x000000C0
#define BGMAC_CHIPCTL_7_IF_TYPE_RMII 0x00000000
#define BGMAC_CHIPCTL_7_IF_TYPE_MII 0x00000040
#define BGMAC_CHIPCTL_7_IF_TYPE_RGMII 0x00000080
#define BGMAC_WEIGHT 64
#define ETHER_MAX_LEN (ETH_FRAME_LEN + ETH_FCS_LEN)
/* Feature Flags */
#define BGMAC_FEAT_TX_MASK_SETUP BIT(0)
#define BGMAC_FEAT_RX_MASK_SETUP BIT(1)
#define BGMAC_FEAT_IOST_ATTACHED BIT(2)
#define BGMAC_FEAT_NO_RESET BIT(3)
#define BGMAC_FEAT_MISC_PLL_REQ BIT(4)
#define BGMAC_FEAT_SW_TYPE_PHY BIT(5)
#define BGMAC_FEAT_SW_TYPE_EPHYRMII BIT(6)
#define BGMAC_FEAT_SW_TYPE_RGMII BIT(7)
#define BGMAC_FEAT_CMN_PHY_CTL BIT(8)
#define BGMAC_FEAT_FLW_CTRL1 BIT(9)
#define BGMAC_FEAT_FLW_CTRL2 BIT(10)
#define BGMAC_FEAT_SET_RXQ_CLK BIT(11)
#define BGMAC_FEAT_CLKCTLST BIT(12)
#define BGMAC_FEAT_NO_CLR_MIB BIT(13)
#define BGMAC_FEAT_FORCE_SPEED_2500 BIT(14)
#define BGMAC_FEAT_CMDCFG_SR_REV4 BIT(15)
#define BGMAC_FEAT_IRQ_ID_OOB_6 BIT(16)
#define BGMAC_FEAT_CC4_IF_SW_TYPE BIT(17)
#define BGMAC_FEAT_CC4_IF_SW_TYPE_RGMII BIT(18)
#define BGMAC_FEAT_CC7_IF_TYPE_RGMII BIT(19)
#define BGMAC_FEAT_IDM_MASK BIT(20)
struct bgmac_slot_info {
union {
struct sk_buff *skb;
void *buf;
};
dma_addr_t dma_addr;
};
struct bgmac_dma_desc {
__le32 ctl0;
__le32 ctl1;
__le32 addr_low;
__le32 addr_high;
} __packed;
enum bgmac_dma_ring_type {
BGMAC_DMA_RING_TX,
BGMAC_DMA_RING_RX,
};
/**
* bgmac_dma_ring - contains info about DMA ring (either TX or RX one)
* @start: index of the first slot containing data
* @end: index of a slot that can *not* be read (yet)
*
* Be really aware of the specific @end meaning. It's an index of a slot *after*
* the one containing data that can be read. If @start equals @end the ring is
* empty.
*/
struct bgmac_dma_ring {
u32 start;
u32 end;
struct bgmac_dma_desc *cpu_base;
dma_addr_t dma_base;
u32 index_base; /* Used for unaligned rings only, otherwise 0 */
u16 mmio_base;
bool unaligned;
struct bgmac_slot_info slots[BGMAC_RX_RING_SLOTS];
};
struct bgmac_rx_header {
__le16 len;
__le16 flags;
__le16 pad[12];
};
struct bgmac {
union {
struct {
void *base;
void *idm_base;
void *nicpm_base;
} plat;
struct {
struct bcma_device *core;
/* Reference to CMN core for BCM4706 */
struct bcma_device *cmn;
} bcma;
};
struct device *dev;
struct device *dma_dev;
u32 feature_flags;
struct net_device *net_dev;
struct napi_struct napi;
struct mii_bus *mii_bus;
/* DMA */
struct bgmac_dma_ring tx_ring[BGMAC_MAX_TX_RINGS];
struct bgmac_dma_ring rx_ring[BGMAC_MAX_RX_RINGS];
/* Stats */
bool stats_grabbed;
u32 mib_tx_regs[BGMAC_NUM_MIB_TX_REGS];
u32 mib_rx_regs[BGMAC_NUM_MIB_RX_REGS];
/* Int */
int irq;
u32 int_mask;
/* Current MAC state */
int mac_speed;
int mac_duplex;
u8 phyaddr;
bool has_robosw;
bool loopback;
u32 (*read)(struct bgmac *bgmac, u16 offset);
void (*write)(struct bgmac *bgmac, u16 offset, u32 value);
u32 (*idm_read)(struct bgmac *bgmac, u16 offset);
void (*idm_write)(struct bgmac *bgmac, u16 offset, u32 value);
bool (*clk_enabled)(struct bgmac *bgmac);
void (*clk_enable)(struct bgmac *bgmac, u32 flags);
void (*cco_ctl_maskset)(struct bgmac *bgmac, u32 offset, u32 mask,
u32 set);
u32 (*get_bus_clock)(struct bgmac *bgmac);
void (*cmn_maskset32)(struct bgmac *bgmac, u16 offset, u32 mask,
u32 set);
int (*phy_connect)(struct bgmac *bgmac);
};
struct bgmac *bgmac_alloc(struct device *dev);
int bgmac_enet_probe(struct bgmac *bgmac);
void bgmac_enet_remove(struct bgmac *bgmac);
void bgmac_adjust_link(struct net_device *net_dev);
int bgmac_phy_connect_direct(struct bgmac *bgmac);
int bgmac_enet_suspend(struct bgmac *bgmac);
int bgmac_enet_resume(struct bgmac *bgmac);
struct mii_bus *bcma_mdio_mii_register(struct bgmac *bgmac);
void bcma_mdio_mii_unregister(struct mii_bus *mii_bus);
static inline u32 bgmac_read(struct bgmac *bgmac, u16 offset)
{
return bgmac->read(bgmac, offset);
}
static inline void bgmac_write(struct bgmac *bgmac, u16 offset, u32 value)
{
bgmac->write(bgmac, offset, value);
}
static inline u32 bgmac_idm_read(struct bgmac *bgmac, u16 offset)
{
return bgmac->idm_read(bgmac, offset);
}
static inline void bgmac_idm_write(struct bgmac *bgmac, u16 offset, u32 value)
{
bgmac->idm_write(bgmac, offset, value);
}
static inline bool bgmac_clk_enabled(struct bgmac *bgmac)
{
return bgmac->clk_enabled(bgmac);
}
static inline void bgmac_clk_enable(struct bgmac *bgmac, u32 flags)
{
bgmac->clk_enable(bgmac, flags);
}
static inline void bgmac_cco_ctl_maskset(struct bgmac *bgmac, u32 offset,
u32 mask, u32 set)
{
bgmac->cco_ctl_maskset(bgmac, offset, mask, set);
}
static inline u32 bgmac_get_bus_clock(struct bgmac *bgmac)
{
return bgmac->get_bus_clock(bgmac);
}
static inline void bgmac_cmn_maskset32(struct bgmac *bgmac, u16 offset,
u32 mask, u32 set)
{
bgmac->cmn_maskset32(bgmac, offset, mask, set);
}
static inline void bgmac_maskset(struct bgmac *bgmac, u16 offset, u32 mask,
u32 set)
{
bgmac_write(bgmac, offset, (bgmac_read(bgmac, offset) & mask) | set);
}
static inline void bgmac_mask(struct bgmac *bgmac, u16 offset, u32 mask)
{
bgmac_maskset(bgmac, offset, mask, 0);
}
static inline void bgmac_set(struct bgmac *bgmac, u16 offset, u32 set)
{
bgmac_maskset(bgmac, offset, ~0, set);
}
static inline int bgmac_phy_connect(struct bgmac *bgmac)
{
return bgmac->phy_connect(bgmac);
}
#endif /* _BGMAC_H */