mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-23 20:53:53 +08:00
cd354f1ae7
After Al Viro (finally) succeeded in removing the sched.h #include in module.h recently, it makes sense again to remove other superfluous sched.h includes. There are quite a lot of files which include it but don't actually need anything defined in there. Presumably these includes were once needed for macros that used to live in sched.h, but moved to other header files in the course of cleaning it up. To ease the pain, this time I did not fiddle with any header files and only removed #includes from .c-files, which tend to cause less trouble. Compile tested against 2.6.20-rc2 and 2.6.20-rc2-mm2 (with offsets) on alpha, arm, i386, ia64, mips, powerpc, and x86_64 with allnoconfig, defconfig, allmodconfig, and allyesconfig as well as a few randconfigs on x86_64 and all configs in arch/arm/configs on arm. I also checked that no new warnings were introduced by the patch (actually, some warnings are removed that were emitted by unnecessarily included header files). Signed-off-by: Tim Schmielau <tim@physik3.uni-rostock.de> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
808 lines
18 KiB
C
808 lines
18 KiB
C
/*
|
|
* saa7191.c - Philips SAA7191 video decoder driver
|
|
*
|
|
* Copyright (C) 2003 Ladislav Michl <ladis@linux-mips.org>
|
|
* Copyright (C) 2004,2005 Mikael Nousiainen <tmnousia@cc.hut.fi>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/major.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/videodev.h>
|
|
#include <linux/video_decoder.h>
|
|
#include <linux/i2c.h>
|
|
|
|
#include "saa7191.h"
|
|
|
|
#define SAA7191_MODULE_VERSION "0.0.5"
|
|
|
|
MODULE_DESCRIPTION("Philips SAA7191 video decoder driver");
|
|
MODULE_VERSION(SAA7191_MODULE_VERSION);
|
|
MODULE_AUTHOR("Mikael Nousiainen <tmnousia@cc.hut.fi>");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
// #define SAA7191_DEBUG
|
|
|
|
#ifdef SAA7191_DEBUG
|
|
#define dprintk(x...) printk("SAA7191: " x);
|
|
#else
|
|
#define dprintk(x...)
|
|
#endif
|
|
|
|
#define SAA7191_SYNC_COUNT 30
|
|
#define SAA7191_SYNC_DELAY 100 /* milliseconds */
|
|
|
|
struct saa7191 {
|
|
struct i2c_client *client;
|
|
|
|
/* the register values are stored here as the actual
|
|
* I2C-registers are write-only */
|
|
u8 reg[25];
|
|
|
|
int input;
|
|
int norm;
|
|
};
|
|
|
|
static struct i2c_driver i2c_driver_saa7191;
|
|
|
|
static const u8 initseq[] = {
|
|
0, /* Subaddress */
|
|
|
|
0x50, /* (0x50) SAA7191_REG_IDEL */
|
|
|
|
/* 50 Hz signal timing */
|
|
0x30, /* (0x30) SAA7191_REG_HSYB */
|
|
0x00, /* (0x00) SAA7191_REG_HSYS */
|
|
0xe8, /* (0xe8) SAA7191_REG_HCLB */
|
|
0xb6, /* (0xb6) SAA7191_REG_HCLS */
|
|
0xf4, /* (0xf4) SAA7191_REG_HPHI */
|
|
|
|
/* control */
|
|
SAA7191_LUMA_APER_1, /* (0x01) SAA7191_REG_LUMA - CVBS mode */
|
|
0x00, /* (0x00) SAA7191_REG_HUEC */
|
|
0xf8, /* (0xf8) SAA7191_REG_CKTQ */
|
|
0xf8, /* (0xf8) SAA7191_REG_CKTS */
|
|
0x90, /* (0x90) SAA7191_REG_PLSE */
|
|
0x90, /* (0x90) SAA7191_REG_SESE */
|
|
0x00, /* (0x00) SAA7191_REG_GAIN */
|
|
SAA7191_STDC_NFEN | SAA7191_STDC_HRMV, /* (0x0c) SAA7191_REG_STDC
|
|
* - not SECAM,
|
|
* slow time constant */
|
|
SAA7191_IOCK_OEDC | SAA7191_IOCK_OEHS | SAA7191_IOCK_OEVS
|
|
| SAA7191_IOCK_OEDY, /* (0x78) SAA7191_REG_IOCK
|
|
* - chroma from CVBS, GPSW1 & 2 off */
|
|
SAA7191_CTL3_AUFD | SAA7191_CTL3_SCEN | SAA7191_CTL3_OFTS
|
|
| SAA7191_CTL3_YDEL0, /* (0x99) SAA7191_REG_CTL3
|
|
* - automatic field detection */
|
|
0x00, /* (0x00) SAA7191_REG_CTL4 */
|
|
0x2c, /* (0x2c) SAA7191_REG_CHCV - PAL nominal value */
|
|
0x00, /* unused */
|
|
0x00, /* unused */
|
|
|
|
/* 60 Hz signal timing */
|
|
0x34, /* (0x34) SAA7191_REG_HS6B */
|
|
0x0a, /* (0x0a) SAA7191_REG_HS6S */
|
|
0xf4, /* (0xf4) SAA7191_REG_HC6B */
|
|
0xce, /* (0xce) SAA7191_REG_HC6S */
|
|
0xf4, /* (0xf4) SAA7191_REG_HP6I */
|
|
};
|
|
|
|
/* SAA7191 register handling */
|
|
|
|
static u8 saa7191_read_reg(struct i2c_client *client,
|
|
u8 reg)
|
|
{
|
|
return ((struct saa7191 *)i2c_get_clientdata(client))->reg[reg];
|
|
}
|
|
|
|
static int saa7191_read_status(struct i2c_client *client,
|
|
u8 *value)
|
|
{
|
|
int ret;
|
|
|
|
ret = i2c_master_recv(client, value, 1);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "SAA7191: saa7191_read_status(): read failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int saa7191_write_reg(struct i2c_client *client, u8 reg,
|
|
u8 value)
|
|
{
|
|
((struct saa7191 *)i2c_get_clientdata(client))->reg[reg] = value;
|
|
return i2c_smbus_write_byte_data(client, reg, value);
|
|
}
|
|
|
|
/* the first byte of data must be the first subaddress number (register) */
|
|
static int saa7191_write_block(struct i2c_client *client,
|
|
u8 length, u8 *data)
|
|
{
|
|
int i;
|
|
int ret;
|
|
|
|
struct saa7191 *decoder = (struct saa7191 *)i2c_get_clientdata(client);
|
|
for (i = 0; i < (length - 1); i++) {
|
|
decoder->reg[data[0] + i] = data[i + 1];
|
|
}
|
|
|
|
ret = i2c_master_send(client, data, length);
|
|
if (ret < 0) {
|
|
printk(KERN_ERR "SAA7191: saa7191_write_block(): "
|
|
"write failed\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Helper functions */
|
|
|
|
static int saa7191_set_input(struct i2c_client *client, int input)
|
|
{
|
|
struct saa7191 *decoder = i2c_get_clientdata(client);
|
|
u8 luma = saa7191_read_reg(client, SAA7191_REG_LUMA);
|
|
u8 iock = saa7191_read_reg(client, SAA7191_REG_IOCK);
|
|
int err;
|
|
|
|
switch (input) {
|
|
case SAA7191_INPUT_COMPOSITE: /* Set Composite input */
|
|
iock &= ~(SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW1
|
|
| SAA7191_IOCK_GPSW2);
|
|
/* Chrominance trap active */
|
|
luma &= ~SAA7191_LUMA_BYPS;
|
|
break;
|
|
case SAA7191_INPUT_SVIDEO: /* Set S-Video input */
|
|
iock |= SAA7191_IOCK_CHRS | SAA7191_IOCK_GPSW2;
|
|
/* Chrominance trap bypassed */
|
|
luma |= SAA7191_LUMA_BYPS;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = saa7191_write_reg(client, SAA7191_REG_LUMA, luma);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(client, SAA7191_REG_IOCK, iock);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
decoder->input = input;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_set_norm(struct i2c_client *client, int norm)
|
|
{
|
|
struct saa7191 *decoder = i2c_get_clientdata(client);
|
|
u8 stdc = saa7191_read_reg(client, SAA7191_REG_STDC);
|
|
u8 ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3);
|
|
u8 chcv = saa7191_read_reg(client, SAA7191_REG_CHCV);
|
|
int err;
|
|
|
|
switch(norm) {
|
|
case SAA7191_NORM_PAL:
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
|
|
chcv = SAA7191_CHCV_PAL;
|
|
break;
|
|
case SAA7191_NORM_NTSC:
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~SAA7191_CTL3_AUFD;
|
|
ctl3 |= SAA7191_CTL3_FSEL;
|
|
chcv = SAA7191_CHCV_NTSC;
|
|
break;
|
|
case SAA7191_NORM_SECAM:
|
|
stdc |= SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_AUFD | SAA7191_CTL3_FSEL);
|
|
chcv = SAA7191_CHCV_PAL;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(client, SAA7191_REG_STDC, stdc);
|
|
if (err)
|
|
return -EIO;
|
|
err = saa7191_write_reg(client, SAA7191_REG_CHCV, chcv);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
decoder->norm = norm;
|
|
|
|
dprintk("ctl3: %02x stdc: %02x chcv: %02x\n", ctl3,
|
|
stdc, chcv);
|
|
dprintk("norm: %d\n", norm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_wait_for_signal(struct i2c_client *client, u8 *status)
|
|
{
|
|
int i = 0;
|
|
|
|
dprintk("Checking for signal...\n");
|
|
|
|
for (i = 0; i < SAA7191_SYNC_COUNT; i++) {
|
|
if (saa7191_read_status(client, status))
|
|
return -EIO;
|
|
|
|
if (((*status) & SAA7191_STATUS_HLCK) == 0) {
|
|
dprintk("Signal found\n");
|
|
return 0;
|
|
}
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
}
|
|
|
|
dprintk("No signal\n");
|
|
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int saa7191_autodetect_norm_extended(struct i2c_client *client)
|
|
{
|
|
u8 stdc = saa7191_read_reg(client, SAA7191_REG_STDC);
|
|
u8 ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3);
|
|
u8 status;
|
|
int err = 0;
|
|
|
|
dprintk("SAA7191 extended signal auto-detection...\n");
|
|
|
|
stdc &= ~SAA7191_STDC_SECS;
|
|
ctl3 &= ~(SAA7191_CTL3_FSEL);
|
|
|
|
err = saa7191_write_reg(client, SAA7191_REG_STDC, stdc);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
ctl3 |= SAA7191_CTL3_AUFD;
|
|
err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3);
|
|
if (err) {
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(client, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
/* 60Hz signal -> NTSC */
|
|
dprintk("60Hz signal: NTSC\n");
|
|
return saa7191_set_norm(client, SAA7191_NORM_NTSC);
|
|
}
|
|
|
|
/* 50Hz signal */
|
|
dprintk("50Hz signal: Trying PAL...\n");
|
|
|
|
/* try PAL first */
|
|
err = saa7191_set_norm(client, SAA7191_NORM_PAL);
|
|
if (err)
|
|
goto out;
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(client, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* not 50Hz ? */
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
dprintk("No 50Hz signal\n");
|
|
err = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
if (status & SAA7191_STATUS_CODE) {
|
|
dprintk("PAL\n");
|
|
return 0;
|
|
}
|
|
|
|
dprintk("No color detected with PAL - Trying SECAM...\n");
|
|
|
|
/* no color detected ? -> try SECAM */
|
|
err = saa7191_set_norm(client,
|
|
SAA7191_NORM_SECAM);
|
|
if (err)
|
|
goto out;
|
|
|
|
msleep(SAA7191_SYNC_DELAY);
|
|
|
|
err = saa7191_wait_for_signal(client, &status);
|
|
if (err)
|
|
goto out;
|
|
|
|
/* not 50Hz ? */
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
dprintk("No 50Hz signal\n");
|
|
err = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
if (status & SAA7191_STATUS_CODE) {
|
|
/* Color detected -> SECAM */
|
|
dprintk("SECAM\n");
|
|
return 0;
|
|
}
|
|
|
|
dprintk("No color detected with SECAM - Going back to PAL.\n");
|
|
|
|
/* still no color detected ?
|
|
* -> set norm back to PAL */
|
|
err = saa7191_set_norm(client,
|
|
SAA7191_NORM_PAL);
|
|
if (err)
|
|
goto out;
|
|
|
|
out:
|
|
ctl3 = saa7191_read_reg(client, SAA7191_REG_CTL3);
|
|
if (ctl3 & SAA7191_CTL3_AUFD) {
|
|
ctl3 &= ~(SAA7191_CTL3_AUFD);
|
|
err = saa7191_write_reg(client, SAA7191_REG_CTL3, ctl3);
|
|
if (err) {
|
|
err = -EIO;
|
|
}
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int saa7191_autodetect_norm(struct i2c_client *client)
|
|
{
|
|
u8 status;
|
|
|
|
dprintk("SAA7191 signal auto-detection...\n");
|
|
|
|
dprintk("Reading status...\n");
|
|
|
|
if (saa7191_read_status(client, &status))
|
|
return -EIO;
|
|
|
|
dprintk("Checking for signal...\n");
|
|
|
|
/* no signal ? */
|
|
if (status & SAA7191_STATUS_HLCK) {
|
|
dprintk("No signal\n");
|
|
return -EBUSY;
|
|
}
|
|
|
|
dprintk("Signal found\n");
|
|
|
|
if (status & SAA7191_STATUS_FIDT) {
|
|
/* 60hz signal -> NTSC */
|
|
dprintk("NTSC\n");
|
|
return saa7191_set_norm(client, SAA7191_NORM_NTSC);
|
|
} else {
|
|
/* 50hz signal -> PAL */
|
|
dprintk("PAL\n");
|
|
return saa7191_set_norm(client, SAA7191_NORM_PAL);
|
|
}
|
|
}
|
|
|
|
static int saa7191_get_control(struct i2c_client *client,
|
|
struct saa7191_control *ctrl)
|
|
{
|
|
u8 reg;
|
|
int ret = 0;
|
|
|
|
switch (ctrl->type) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
case SAA7191_CONTROL_CORING:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_LUMA);
|
|
switch (ctrl->type) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_BPSS_MASK)
|
|
>> SAA7191_LUMA_BPSS_SHIFT;
|
|
break;
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_APER_MASK)
|
|
>> SAA7191_LUMA_APER_SHIFT;
|
|
break;
|
|
case SAA7191_CONTROL_CORING:
|
|
ctrl->value = ((s32)reg & SAA7191_LUMA_CORI_MASK)
|
|
>> SAA7191_LUMA_CORI_SHIFT;
|
|
break;
|
|
}
|
|
break;
|
|
case SAA7191_CONTROL_FORCE_COLOUR:
|
|
case SAA7191_CONTROL_CHROMA_GAIN:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_GAIN);
|
|
if (ctrl->type == SAA7191_CONTROL_FORCE_COLOUR)
|
|
ctrl->value = ((s32)reg & SAA7191_GAIN_COLO) ? 1 : 0;
|
|
else
|
|
ctrl->value = ((s32)reg & SAA7191_GAIN_LFIS_MASK)
|
|
>> SAA7191_GAIN_LFIS_SHIFT;
|
|
break;
|
|
case SAA7191_CONTROL_HUE:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_HUEC);
|
|
if (reg < 0x80)
|
|
reg += 0x80;
|
|
else
|
|
reg -= 0x80;
|
|
ctrl->value = (s32)reg;
|
|
break;
|
|
case SAA7191_CONTROL_VTRC:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_STDC);
|
|
ctrl->value = ((s32)reg & SAA7191_STDC_VTRC) ? 1 : 0;
|
|
break;
|
|
case SAA7191_CONTROL_LUMA_DELAY:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_CTL3);
|
|
ctrl->value = ((s32)reg & SAA7191_CTL3_YDEL_MASK)
|
|
>> SAA7191_CTL3_YDEL_SHIFT;
|
|
if (ctrl->value >= 4)
|
|
ctrl->value -= 8;
|
|
break;
|
|
case SAA7191_CONTROL_VNR:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_CTL4);
|
|
ctrl->value = ((s32)reg & SAA7191_CTL4_VNOI_MASK)
|
|
>> SAA7191_CTL4_VNOI_SHIFT;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int saa7191_set_control(struct i2c_client *client,
|
|
struct saa7191_control *ctrl)
|
|
{
|
|
u8 reg;
|
|
int ret = 0;
|
|
|
|
switch (ctrl->type) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
case SAA7191_CONTROL_CORING:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_LUMA);
|
|
switch (ctrl->type) {
|
|
case SAA7191_CONTROL_BANDPASS:
|
|
reg &= ~SAA7191_LUMA_BPSS_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_BPSS_SHIFT)
|
|
& SAA7191_LUMA_BPSS_MASK;
|
|
break;
|
|
case SAA7191_CONTROL_BANDPASS_WEIGHT:
|
|
reg &= ~SAA7191_LUMA_APER_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_APER_SHIFT)
|
|
& SAA7191_LUMA_APER_MASK;
|
|
break;
|
|
case SAA7191_CONTROL_CORING:
|
|
reg &= ~SAA7191_LUMA_CORI_MASK;
|
|
reg |= (ctrl->value << SAA7191_LUMA_CORI_SHIFT)
|
|
& SAA7191_LUMA_CORI_MASK;
|
|
break;
|
|
}
|
|
ret = saa7191_write_reg(client, SAA7191_REG_LUMA, reg);
|
|
break;
|
|
case SAA7191_CONTROL_FORCE_COLOUR:
|
|
case SAA7191_CONTROL_CHROMA_GAIN:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_GAIN);
|
|
if (ctrl->type == SAA7191_CONTROL_FORCE_COLOUR) {
|
|
if (ctrl->value)
|
|
reg |= SAA7191_GAIN_COLO;
|
|
else
|
|
reg &= ~SAA7191_GAIN_COLO;
|
|
} else {
|
|
reg &= ~SAA7191_GAIN_LFIS_MASK;
|
|
reg |= (ctrl->value << SAA7191_GAIN_LFIS_SHIFT)
|
|
& SAA7191_GAIN_LFIS_MASK;
|
|
}
|
|
ret = saa7191_write_reg(client, SAA7191_REG_GAIN, reg);
|
|
break;
|
|
case SAA7191_CONTROL_HUE:
|
|
reg = ctrl->value & 0xff;
|
|
if (reg < 0x80)
|
|
reg += 0x80;
|
|
else
|
|
reg -= 0x80;
|
|
ret = saa7191_write_reg(client, SAA7191_REG_HUEC, reg);
|
|
break;
|
|
case SAA7191_CONTROL_VTRC:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_STDC);
|
|
if (ctrl->value)
|
|
reg |= SAA7191_STDC_VTRC;
|
|
else
|
|
reg &= ~SAA7191_STDC_VTRC;
|
|
ret = saa7191_write_reg(client, SAA7191_REG_STDC, reg);
|
|
break;
|
|
case SAA7191_CONTROL_LUMA_DELAY: {
|
|
s32 value = ctrl->value;
|
|
if (value < 0)
|
|
value += 8;
|
|
reg = saa7191_read_reg(client, SAA7191_REG_CTL3);
|
|
reg &= ~SAA7191_CTL3_YDEL_MASK;
|
|
reg |= (value << SAA7191_CTL3_YDEL_SHIFT)
|
|
& SAA7191_CTL3_YDEL_MASK;
|
|
ret = saa7191_write_reg(client, SAA7191_REG_CTL3, reg);
|
|
break;
|
|
}
|
|
case SAA7191_CONTROL_VNR:
|
|
reg = saa7191_read_reg(client, SAA7191_REG_CTL4);
|
|
reg &= ~SAA7191_CTL4_VNOI_MASK;
|
|
reg |= (ctrl->value << SAA7191_CTL4_VNOI_SHIFT)
|
|
& SAA7191_CTL4_VNOI_MASK;
|
|
ret = saa7191_write_reg(client, SAA7191_REG_CTL4, reg);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* I2C-interface */
|
|
|
|
static int saa7191_attach(struct i2c_adapter *adap, int addr, int kind)
|
|
{
|
|
int err = 0;
|
|
struct saa7191 *decoder;
|
|
struct i2c_client *client;
|
|
|
|
printk(KERN_INFO "Philips SAA7191 driver version %s\n",
|
|
SAA7191_MODULE_VERSION);
|
|
|
|
client = kzalloc(sizeof(*client), GFP_KERNEL);
|
|
if (!client)
|
|
return -ENOMEM;
|
|
decoder = kzalloc(sizeof(*decoder), GFP_KERNEL);
|
|
if (!decoder) {
|
|
err = -ENOMEM;
|
|
goto out_free_client;
|
|
}
|
|
|
|
client->addr = addr;
|
|
client->adapter = adap;
|
|
client->driver = &i2c_driver_saa7191;
|
|
client->flags = 0;
|
|
strcpy(client->name, "saa7191 client");
|
|
i2c_set_clientdata(client, decoder);
|
|
|
|
decoder->client = client;
|
|
|
|
err = i2c_attach_client(client);
|
|
if (err)
|
|
goto out_free_decoder;
|
|
|
|
err = saa7191_write_block(client, sizeof(initseq), (u8 *)initseq);
|
|
if (err) {
|
|
printk(KERN_ERR "SAA7191 initialization failed\n");
|
|
goto out_detach_client;
|
|
}
|
|
|
|
printk(KERN_INFO "SAA7191 initialized\n");
|
|
|
|
decoder->input = SAA7191_INPUT_COMPOSITE;
|
|
decoder->norm = SAA7191_NORM_PAL;
|
|
|
|
err = saa7191_autodetect_norm(client);
|
|
if (err && (err != -EBUSY)) {
|
|
printk(KERN_ERR "SAA7191: Signal auto-detection failed\n");
|
|
}
|
|
|
|
return 0;
|
|
|
|
out_detach_client:
|
|
i2c_detach_client(client);
|
|
out_free_decoder:
|
|
kfree(decoder);
|
|
out_free_client:
|
|
kfree(client);
|
|
return err;
|
|
}
|
|
|
|
static int saa7191_probe(struct i2c_adapter *adap)
|
|
{
|
|
/* Always connected to VINO */
|
|
if (adap->id == I2C_HW_SGI_VINO)
|
|
return saa7191_attach(adap, SAA7191_ADDR, 0);
|
|
/* Feel free to add probe here :-) */
|
|
return -ENODEV;
|
|
}
|
|
|
|
static int saa7191_detach(struct i2c_client *client)
|
|
{
|
|
struct saa7191 *decoder = i2c_get_clientdata(client);
|
|
|
|
i2c_detach_client(client);
|
|
kfree(decoder);
|
|
kfree(client);
|
|
return 0;
|
|
}
|
|
|
|
static int saa7191_command(struct i2c_client *client, unsigned int cmd,
|
|
void *arg)
|
|
{
|
|
struct saa7191 *decoder = i2c_get_clientdata(client);
|
|
|
|
switch (cmd) {
|
|
case DECODER_GET_CAPABILITIES: {
|
|
struct video_decoder_capability *cap = arg;
|
|
|
|
cap->flags = VIDEO_DECODER_PAL | VIDEO_DECODER_NTSC |
|
|
VIDEO_DECODER_SECAM | VIDEO_DECODER_AUTO;
|
|
cap->inputs = (client->adapter->id == I2C_HW_SGI_VINO) ? 2 : 1;
|
|
cap->outputs = 1;
|
|
break;
|
|
}
|
|
case DECODER_GET_STATUS: {
|
|
int *iarg = arg;
|
|
u8 status;
|
|
int res = 0;
|
|
|
|
if (saa7191_read_status(client, &status)) {
|
|
return -EIO;
|
|
}
|
|
if ((status & SAA7191_STATUS_HLCK) == 0)
|
|
res |= DECODER_STATUS_GOOD;
|
|
if (status & SAA7191_STATUS_CODE)
|
|
res |= DECODER_STATUS_COLOR;
|
|
switch (decoder->norm) {
|
|
case SAA7191_NORM_NTSC:
|
|
res |= DECODER_STATUS_NTSC;
|
|
break;
|
|
case SAA7191_NORM_PAL:
|
|
res |= DECODER_STATUS_PAL;
|
|
break;
|
|
case SAA7191_NORM_SECAM:
|
|
res |= DECODER_STATUS_SECAM;
|
|
break;
|
|
case SAA7191_NORM_AUTO:
|
|
default:
|
|
if (status & SAA7191_STATUS_FIDT)
|
|
res |= DECODER_STATUS_NTSC;
|
|
else
|
|
res |= DECODER_STATUS_PAL;
|
|
break;
|
|
}
|
|
*iarg = res;
|
|
break;
|
|
}
|
|
case DECODER_SET_NORM: {
|
|
int *iarg = arg;
|
|
|
|
switch (*iarg) {
|
|
case VIDEO_MODE_AUTO:
|
|
return saa7191_autodetect_norm(client);
|
|
case VIDEO_MODE_PAL:
|
|
return saa7191_set_norm(client, SAA7191_NORM_PAL);
|
|
case VIDEO_MODE_NTSC:
|
|
return saa7191_set_norm(client, SAA7191_NORM_NTSC);
|
|
case VIDEO_MODE_SECAM:
|
|
return saa7191_set_norm(client, SAA7191_NORM_SECAM);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
case DECODER_SET_INPUT: {
|
|
int *iarg = arg;
|
|
|
|
switch (client->adapter->id) {
|
|
case I2C_HW_SGI_VINO:
|
|
return saa7191_set_input(client, *iarg);
|
|
default:
|
|
if (*iarg != 0)
|
|
return -EINVAL;
|
|
}
|
|
break;
|
|
}
|
|
case DECODER_SET_OUTPUT: {
|
|
int *iarg = arg;
|
|
|
|
/* not much choice of outputs */
|
|
if (*iarg != 0)
|
|
return -EINVAL;
|
|
break;
|
|
}
|
|
case DECODER_ENABLE_OUTPUT: {
|
|
/* Always enabled */
|
|
break;
|
|
}
|
|
case DECODER_SET_PICTURE: {
|
|
struct video_picture *pic = arg;
|
|
unsigned val;
|
|
int err;
|
|
|
|
val = (pic->hue >> 8) - 0x80;
|
|
|
|
err = saa7191_write_reg(client, SAA7191_REG_HUEC, val);
|
|
if (err)
|
|
return -EIO;
|
|
|
|
break;
|
|
}
|
|
case DECODER_SAA7191_GET_STATUS: {
|
|
struct saa7191_status *status = arg;
|
|
u8 status_reg;
|
|
|
|
if (saa7191_read_status(client, &status_reg))
|
|
return -EIO;
|
|
|
|
status->signal = ((status_reg & SAA7191_STATUS_HLCK) == 0)
|
|
? 1 : 0;
|
|
status->signal_60hz = (status_reg & SAA7191_STATUS_FIDT)
|
|
? 1 : 0;
|
|
status->color = (status_reg & SAA7191_STATUS_CODE) ? 1 : 0;
|
|
|
|
status->input = decoder->input;
|
|
status->norm = decoder->norm;
|
|
|
|
break;
|
|
}
|
|
case DECODER_SAA7191_SET_NORM: {
|
|
int *norm = arg;
|
|
|
|
switch (*norm) {
|
|
case SAA7191_NORM_AUTO:
|
|
return saa7191_autodetect_norm(client);
|
|
case SAA7191_NORM_AUTO_EXT:
|
|
return saa7191_autodetect_norm_extended(client);
|
|
default:
|
|
return saa7191_set_norm(client, *norm);
|
|
}
|
|
}
|
|
case DECODER_SAA7191_GET_CONTROL: {
|
|
return saa7191_get_control(client, arg);
|
|
}
|
|
case DECODER_SAA7191_SET_CONTROL: {
|
|
return saa7191_set_control(client, arg);
|
|
}
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct i2c_driver i2c_driver_saa7191 = {
|
|
.driver = {
|
|
.name = "saa7191",
|
|
},
|
|
.id = I2C_DRIVERID_SAA7191,
|
|
.attach_adapter = saa7191_probe,
|
|
.detach_client = saa7191_detach,
|
|
.command = saa7191_command
|
|
};
|
|
|
|
static int saa7191_init(void)
|
|
{
|
|
return i2c_add_driver(&i2c_driver_saa7191);
|
|
}
|
|
|
|
static void saa7191_exit(void)
|
|
{
|
|
i2c_del_driver(&i2c_driver_saa7191);
|
|
}
|
|
|
|
module_init(saa7191_init);
|
|
module_exit(saa7191_exit);
|