mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-27 14:43:58 +08:00
6ebbf2ce43
ARMv6 and greater introduced a new instruction ("bx") which can be used
to return from function calls. Recent CPUs perform better when the
"bx lr" instruction is used rather than the "mov pc, lr" instruction,
and this sequence is strongly recommended to be used by the ARM
architecture manual (section A.4.1.1).
We provide a new macro "ret" with all its variants for the condition
code which will resolve to the appropriate instruction.
Rather than doing this piecemeal, and miss some instances, change all
the "mov pc" instances to use the new macro, with the exception of
the "movs" instruction and the kprobes code. This allows us to detect
the "mov pc, lr" case and fix it up - and also gives us the possibility
of deploying this for other registers depending on the CPU selection.
Reported-by: Will Deacon <will.deacon@arm.com>
Tested-by: Stephen Warren <swarren@nvidia.com> # Tegra Jetson TK1
Tested-by: Robert Jarzmik <robert.jarzmik@free.fr> # mioa701_bootresume.S
Tested-by: Andrew Lunn <andrew@lunn.ch> # Kirkwood
Tested-by: Shawn Guo <shawn.guo@freescale.com>
Tested-by: Tony Lindgren <tony@atomide.com> # OMAPs
Tested-by: Gregory CLEMENT <gregory.clement@free-electrons.com> # Armada XP, 375, 385
Acked-by: Sekhar Nori <nsekhar@ti.com> # DaVinci
Acked-by: Christoffer Dall <christoffer.dall@linaro.org> # kvm/hyp
Acked-by: Haojian Zhuang <haojian.zhuang@gmail.com> # PXA3xx
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> # Xen
Tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> # ARMv7M
Tested-by: Simon Horman <horms+renesas@verge.net.au> # Shmobile
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
115 lines
2.8 KiB
ArmAsm
115 lines
2.8 KiB
ArmAsm
/*
|
|
* PXA27x standby mode
|
|
*
|
|
* Author: David Burrage
|
|
*
|
|
* 2005 (c) MontaVista Software, Inc. This file is licensed under
|
|
* the terms of the GNU General Public License version 2. This program
|
|
* is licensed "as is" without any warranty of any kind, whether express
|
|
* or implied.
|
|
*/
|
|
|
|
#include <linux/linkage.h>
|
|
#include <asm/assembler.h>
|
|
#include <mach/hardware.h>
|
|
|
|
#include <mach/pxa2xx-regs.h>
|
|
|
|
.text
|
|
|
|
#ifdef CONFIG_PXA27x
|
|
ENTRY(pxa_cpu_standby)
|
|
ldr r0, =PSSR
|
|
mov r1, #(PSSR_PH | PSSR_STS)
|
|
mov r2, #PWRMODE_STANDBY
|
|
mov r3, #UNCACHED_PHYS_0 @ Read mem context in.
|
|
ldr ip, [r3]
|
|
b 1f
|
|
|
|
.align 5
|
|
1: mcr p14, 0, r2, c7, c0, 0 @ put the system into Standby
|
|
str r1, [r0] @ make sure PSSR_PH/STS are clear
|
|
ret lr
|
|
|
|
#endif
|
|
|
|
#ifdef CONFIG_PXA3xx
|
|
|
|
#define PXA3_MDCNFG 0x0000
|
|
#define PXA3_MDCNFG_DMCEN (1 << 30)
|
|
#define PXA3_DDR_HCAL 0x0060
|
|
#define PXA3_DDR_HCAL_HCRNG 0x1f
|
|
#define PXA3_DDR_HCAL_HCPROG (1 << 28)
|
|
#define PXA3_DDR_HCAL_HCEN (1 << 31)
|
|
#define PXA3_DMCIER 0x0070
|
|
#define PXA3_DMCIER_EDLP (1 << 29)
|
|
#define PXA3_DMCISR 0x0078
|
|
#define PXA3_RCOMP 0x0100
|
|
#define PXA3_RCOMP_SWEVAL (1 << 31)
|
|
|
|
ENTRY(pm_enter_standby_start)
|
|
mov r1, #0xf6000000 @ DMEMC_REG_BASE (PXA3_MDCNFG)
|
|
add r1, r1, #0x00100000
|
|
|
|
/*
|
|
* Preload the TLB entry for accessing the dynamic memory
|
|
* controller registers. Note that page table lookups will
|
|
* fail until the dynamic memory controller has been
|
|
* reinitialised - and that includes MMU page table walks.
|
|
* This also means that only the dynamic memory controller
|
|
* can be reliably accessed in the code following standby.
|
|
*/
|
|
ldr r2, [r1] @ Dummy read PXA3_MDCNFG
|
|
|
|
mcr p14, 0, r0, c7, c0, 0
|
|
.rept 8
|
|
nop
|
|
.endr
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ Clear (and wait for) HCEN
|
|
bic r0, r0, #PXA3_DDR_HCAL_HCEN
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
1: ldr r0, [r1, #PXA3_DDR_HCAL]
|
|
tst r0, #PXA3_DDR_HCAL_HCEN
|
|
bne 1b
|
|
|
|
ldr r0, [r1, #PXA3_RCOMP] @ Initiate RCOMP
|
|
orr r0, r0, #PXA3_RCOMP_SWEVAL
|
|
str r0, [r1, #PXA3_RCOMP]
|
|
|
|
mov r0, #~0 @ Clear interrupts
|
|
str r0, [r1, #PXA3_DMCISR]
|
|
|
|
ldr r0, [r1, #PXA3_DMCIER] @ set DMIER[EDLP]
|
|
orr r0, r0, #PXA3_DMCIER_EDLP
|
|
str r0, [r1, #PXA3_DMCIER]
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ clear HCRNG, set HCPROG, HCEN
|
|
bic r0, r0, #PXA3_DDR_HCAL_HCRNG
|
|
orr r0, r0, #PXA3_DDR_HCAL_HCEN | PXA3_DDR_HCAL_HCPROG
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
|
|
1: ldr r0, [r1, #PXA3_DMCISR]
|
|
tst r0, #PXA3_DMCIER_EDLP
|
|
beq 1b
|
|
|
|
ldr r0, [r1, #PXA3_MDCNFG] @ set PXA3_MDCNFG[DMCEN]
|
|
orr r0, r0, #PXA3_MDCNFG_DMCEN
|
|
str r0, [r1, #PXA3_MDCNFG]
|
|
1: ldr r0, [r1, #PXA3_MDCNFG]
|
|
tst r0, #PXA3_MDCNFG_DMCEN
|
|
beq 1b
|
|
|
|
ldr r0, [r1, #PXA3_DDR_HCAL] @ set PXA3_DDR_HCAL[HCRNG]
|
|
orr r0, r0, #2 @ HCRNG
|
|
str r0, [r1, #PXA3_DDR_HCAL]
|
|
|
|
ldr r0, [r1, #PXA3_DMCIER] @ Clear the interrupt
|
|
bic r0, r0, #0x20000000
|
|
str r0, [r1, #PXA3_DMCIER]
|
|
|
|
ret lr
|
|
ENTRY(pm_enter_standby_end)
|
|
|
|
#endif
|