mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-21 19:53:59 +08:00
2deff8d602
Some of the spi driver module remove hooks were annotated with __exit and referenced with __exit_p(). Presumably these were supposed to be __devinit, __devexit and __devexit_p() since __init/__exit for a probe/remove hook has never been correct. They also got missed during the big __devinit/__devexit purge since they didn't match the pattern. Remove then now to be rid of it. v2: purge __init also Reported-by: Arnd Bergmann <arnd@arndb.de> [Arnd set a patch cleaning up one, and then I found more] Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
534 lines
12 KiB
C
534 lines
12 KiB
C
/*
|
|
* Marvell Orion SPI controller driver
|
|
*
|
|
* Author: Shadi Ammouri <shadi@marvell.com>
|
|
* Copyright (C) 2007-2008 Marvell Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/clk.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#define DRIVER_NAME "orion_spi"
|
|
|
|
#define ORION_NUM_CHIPSELECTS 1 /* only one slave is supported*/
|
|
#define ORION_SPI_WAIT_RDY_MAX_LOOP 2000 /* in usec */
|
|
|
|
#define ORION_SPI_IF_CTRL_REG 0x00
|
|
#define ORION_SPI_IF_CONFIG_REG 0x04
|
|
#define ORION_SPI_DATA_OUT_REG 0x08
|
|
#define ORION_SPI_DATA_IN_REG 0x0c
|
|
#define ORION_SPI_INT_CAUSE_REG 0x10
|
|
|
|
#define ORION_SPI_MODE_CPOL (1 << 11)
|
|
#define ORION_SPI_MODE_CPHA (1 << 12)
|
|
#define ORION_SPI_IF_8_16_BIT_MODE (1 << 5)
|
|
#define ORION_SPI_CLK_PRESCALE_MASK 0x1F
|
|
#define ORION_SPI_MODE_MASK (ORION_SPI_MODE_CPOL | \
|
|
ORION_SPI_MODE_CPHA)
|
|
|
|
struct orion_spi {
|
|
struct spi_master *master;
|
|
void __iomem *base;
|
|
unsigned int max_speed;
|
|
unsigned int min_speed;
|
|
struct clk *clk;
|
|
};
|
|
|
|
static inline void __iomem *spi_reg(struct orion_spi *orion_spi, u32 reg)
|
|
{
|
|
return orion_spi->base + reg;
|
|
}
|
|
|
|
static inline void
|
|
orion_spi_setbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *reg_addr = spi_reg(orion_spi, reg);
|
|
u32 val;
|
|
|
|
val = readl(reg_addr);
|
|
val |= mask;
|
|
writel(val, reg_addr);
|
|
}
|
|
|
|
static inline void
|
|
orion_spi_clrbits(struct orion_spi *orion_spi, u32 reg, u32 mask)
|
|
{
|
|
void __iomem *reg_addr = spi_reg(orion_spi, reg);
|
|
u32 val;
|
|
|
|
val = readl(reg_addr);
|
|
val &= ~mask;
|
|
writel(val, reg_addr);
|
|
}
|
|
|
|
static int orion_spi_set_transfer_size(struct orion_spi *orion_spi, int size)
|
|
{
|
|
if (size == 16) {
|
|
orion_spi_setbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
|
|
ORION_SPI_IF_8_16_BIT_MODE);
|
|
} else if (size == 8) {
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CONFIG_REG,
|
|
ORION_SPI_IF_8_16_BIT_MODE);
|
|
} else {
|
|
pr_debug("Bad bits per word value %d (only 8 or 16 are "
|
|
"allowed).\n", size);
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orion_spi_baudrate_set(struct spi_device *spi, unsigned int speed)
|
|
{
|
|
u32 tclk_hz;
|
|
u32 rate;
|
|
u32 prescale;
|
|
u32 reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
tclk_hz = clk_get_rate(orion_spi->clk);
|
|
|
|
/*
|
|
* the supported rates are: 4,6,8...30
|
|
* round up as we look for equal or less speed
|
|
*/
|
|
rate = DIV_ROUND_UP(tclk_hz, speed);
|
|
rate = roundup(rate, 2);
|
|
|
|
/* check if requested speed is too small */
|
|
if (rate > 30)
|
|
return -EINVAL;
|
|
|
|
if (rate < 4)
|
|
rate = 4;
|
|
|
|
/* Convert the rate to SPI clock divisor value. */
|
|
prescale = 0x10 + rate/2;
|
|
|
|
reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
reg = ((reg & ~ORION_SPI_CLK_PRESCALE_MASK) | prescale);
|
|
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
orion_spi_mode_set(struct spi_device *spi)
|
|
{
|
|
u32 reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
reg = readl(spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
reg &= ~ORION_SPI_MODE_MASK;
|
|
if (spi->mode & SPI_CPOL)
|
|
reg |= ORION_SPI_MODE_CPOL;
|
|
if (spi->mode & SPI_CPHA)
|
|
reg |= ORION_SPI_MODE_CPHA;
|
|
writel(reg, spi_reg(orion_spi, ORION_SPI_IF_CONFIG_REG));
|
|
}
|
|
|
|
/*
|
|
* called only when no transfer is active on the bus
|
|
*/
|
|
static int
|
|
orion_spi_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
|
|
{
|
|
struct orion_spi *orion_spi;
|
|
unsigned int speed = spi->max_speed_hz;
|
|
unsigned int bits_per_word = spi->bits_per_word;
|
|
int rc;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if ((t != NULL) && t->speed_hz)
|
|
speed = t->speed_hz;
|
|
|
|
if ((t != NULL) && t->bits_per_word)
|
|
bits_per_word = t->bits_per_word;
|
|
|
|
orion_spi_mode_set(spi);
|
|
|
|
rc = orion_spi_baudrate_set(spi, speed);
|
|
if (rc)
|
|
return rc;
|
|
|
|
return orion_spi_set_transfer_size(orion_spi, bits_per_word);
|
|
}
|
|
|
|
static void orion_spi_set_cs(struct orion_spi *orion_spi, int enable)
|
|
{
|
|
if (enable)
|
|
orion_spi_setbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
|
|
else
|
|
orion_spi_clrbits(orion_spi, ORION_SPI_IF_CTRL_REG, 0x1);
|
|
}
|
|
|
|
static inline int orion_spi_wait_till_ready(struct orion_spi *orion_spi)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ORION_SPI_WAIT_RDY_MAX_LOOP; i++) {
|
|
if (readl(spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG)))
|
|
return 1;
|
|
else
|
|
udelay(1);
|
|
}
|
|
|
|
return -1;
|
|
}
|
|
|
|
static inline int
|
|
orion_spi_write_read_8bit(struct spi_device *spi,
|
|
const u8 **tx_buf, u8 **rx_buf)
|
|
{
|
|
void __iomem *tx_reg, *rx_reg, *int_reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
|
|
rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
|
|
int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
|
|
|
|
/* clear the interrupt cause register */
|
|
writel(0x0, int_reg);
|
|
|
|
if (tx_buf && *tx_buf)
|
|
writel(*(*tx_buf)++, tx_reg);
|
|
else
|
|
writel(0, tx_reg);
|
|
|
|
if (orion_spi_wait_till_ready(orion_spi) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
if (rx_buf && *rx_buf)
|
|
*(*rx_buf)++ = readl(rx_reg);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static inline int
|
|
orion_spi_write_read_16bit(struct spi_device *spi,
|
|
const u16 **tx_buf, u16 **rx_buf)
|
|
{
|
|
void __iomem *tx_reg, *rx_reg, *int_reg;
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
tx_reg = spi_reg(orion_spi, ORION_SPI_DATA_OUT_REG);
|
|
rx_reg = spi_reg(orion_spi, ORION_SPI_DATA_IN_REG);
|
|
int_reg = spi_reg(orion_spi, ORION_SPI_INT_CAUSE_REG);
|
|
|
|
/* clear the interrupt cause register */
|
|
writel(0x0, int_reg);
|
|
|
|
if (tx_buf && *tx_buf)
|
|
writel(__cpu_to_le16(get_unaligned((*tx_buf)++)), tx_reg);
|
|
else
|
|
writel(0, tx_reg);
|
|
|
|
if (orion_spi_wait_till_ready(orion_spi) < 0) {
|
|
dev_err(&spi->dev, "TXS timed out\n");
|
|
return -1;
|
|
}
|
|
|
|
if (rx_buf && *rx_buf)
|
|
put_unaligned(__le16_to_cpu(readl(rx_reg)), (*rx_buf)++);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static unsigned int
|
|
orion_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct orion_spi *orion_spi;
|
|
unsigned int count;
|
|
int word_len;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
word_len = spi->bits_per_word;
|
|
count = xfer->len;
|
|
|
|
if (word_len == 8) {
|
|
const u8 *tx = xfer->tx_buf;
|
|
u8 *rx = xfer->rx_buf;
|
|
|
|
do {
|
|
if (orion_spi_write_read_8bit(spi, &tx, &rx) < 0)
|
|
goto out;
|
|
count--;
|
|
} while (count);
|
|
} else if (word_len == 16) {
|
|
const u16 *tx = xfer->tx_buf;
|
|
u16 *rx = xfer->rx_buf;
|
|
|
|
do {
|
|
if (orion_spi_write_read_16bit(spi, &tx, &rx) < 0)
|
|
goto out;
|
|
count -= 2;
|
|
} while (count);
|
|
}
|
|
|
|
out:
|
|
return xfer->len - count;
|
|
}
|
|
|
|
|
|
static int orion_spi_transfer_one_message(struct spi_master *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct orion_spi *orion_spi = spi_master_get_devdata(master);
|
|
struct spi_device *spi = m->spi;
|
|
struct spi_transfer *t = NULL;
|
|
int par_override = 0;
|
|
int status = 0;
|
|
int cs_active = 0;
|
|
|
|
/* Load defaults */
|
|
status = orion_spi_setup_transfer(spi, NULL);
|
|
|
|
if (status < 0)
|
|
goto msg_done;
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
/* make sure buffer length is even when working in 16
|
|
* bit mode*/
|
|
if ((t->bits_per_word == 16) && (t->len & 1)) {
|
|
dev_err(&spi->dev,
|
|
"message rejected : "
|
|
"odd data length %d while in 16 bit mode\n",
|
|
t->len);
|
|
status = -EIO;
|
|
goto msg_done;
|
|
}
|
|
|
|
if (t->speed_hz && t->speed_hz < orion_spi->min_speed) {
|
|
dev_err(&spi->dev,
|
|
"message rejected : "
|
|
"device min speed (%d Hz) exceeds "
|
|
"required transfer speed (%d Hz)\n",
|
|
orion_spi->min_speed, t->speed_hz);
|
|
status = -EIO;
|
|
goto msg_done;
|
|
}
|
|
|
|
if (par_override || t->speed_hz || t->bits_per_word) {
|
|
par_override = 1;
|
|
status = orion_spi_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
break;
|
|
if (!t->speed_hz && !t->bits_per_word)
|
|
par_override = 0;
|
|
}
|
|
|
|
if (!cs_active) {
|
|
orion_spi_set_cs(orion_spi, 1);
|
|
cs_active = 1;
|
|
}
|
|
|
|
if (t->len)
|
|
m->actual_length += orion_spi_write_read(spi, t);
|
|
|
|
if (t->delay_usecs)
|
|
udelay(t->delay_usecs);
|
|
|
|
if (t->cs_change) {
|
|
orion_spi_set_cs(orion_spi, 0);
|
|
cs_active = 0;
|
|
}
|
|
}
|
|
|
|
msg_done:
|
|
if (cs_active)
|
|
orion_spi_set_cs(orion_spi, 0);
|
|
|
|
m->status = status;
|
|
spi_finalize_current_message(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orion_spi_reset(struct orion_spi *orion_spi)
|
|
{
|
|
/* Verify that the CS is deasserted */
|
|
orion_spi_set_cs(orion_spi, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int orion_spi_setup(struct spi_device *spi)
|
|
{
|
|
struct orion_spi *orion_spi;
|
|
|
|
orion_spi = spi_master_get_devdata(spi->master);
|
|
|
|
if ((spi->max_speed_hz == 0)
|
|
|| (spi->max_speed_hz > orion_spi->max_speed))
|
|
spi->max_speed_hz = orion_spi->max_speed;
|
|
|
|
if (spi->max_speed_hz < orion_spi->min_speed) {
|
|
dev_err(&spi->dev, "setup: requested speed too low %d Hz\n",
|
|
spi->max_speed_hz);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/*
|
|
* baudrate & width will be set orion_spi_setup_transfer
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
static int orion_spi_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct orion_spi *spi;
|
|
struct resource *r;
|
|
unsigned long tclk_hz;
|
|
int status = 0;
|
|
const u32 *iprop;
|
|
int size;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof *spi);
|
|
if (master == NULL) {
|
|
dev_dbg(&pdev->dev, "master allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pdev->id != -1)
|
|
master->bus_num = pdev->id;
|
|
if (pdev->dev.of_node) {
|
|
iprop = of_get_property(pdev->dev.of_node, "cell-index",
|
|
&size);
|
|
if (iprop && size == sizeof(*iprop))
|
|
master->bus_num = *iprop;
|
|
}
|
|
|
|
/* we support only mode 0, and no options */
|
|
master->mode_bits = SPI_CPHA | SPI_CPOL;
|
|
|
|
master->setup = orion_spi_setup;
|
|
master->transfer_one_message = orion_spi_transfer_one_message;
|
|
master->num_chipselect = ORION_NUM_CHIPSELECTS;
|
|
|
|
dev_set_drvdata(&pdev->dev, master);
|
|
|
|
spi = spi_master_get_devdata(master);
|
|
spi->master = master;
|
|
|
|
spi->clk = clk_get(&pdev->dev, NULL);
|
|
if (IS_ERR(spi->clk)) {
|
|
status = PTR_ERR(spi->clk);
|
|
goto out;
|
|
}
|
|
|
|
clk_prepare(spi->clk);
|
|
clk_enable(spi->clk);
|
|
tclk_hz = clk_get_rate(spi->clk);
|
|
spi->max_speed = DIV_ROUND_UP(tclk_hz, 4);
|
|
spi->min_speed = DIV_ROUND_UP(tclk_hz, 30);
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (r == NULL) {
|
|
status = -ENODEV;
|
|
goto out_rel_clk;
|
|
}
|
|
|
|
if (!request_mem_region(r->start, resource_size(r),
|
|
dev_name(&pdev->dev))) {
|
|
status = -EBUSY;
|
|
goto out_rel_clk;
|
|
}
|
|
spi->base = ioremap(r->start, SZ_1K);
|
|
|
|
if (orion_spi_reset(spi) < 0)
|
|
goto out_rel_mem;
|
|
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
status = spi_register_master(master);
|
|
if (status < 0)
|
|
goto out_rel_mem;
|
|
|
|
return status;
|
|
|
|
out_rel_mem:
|
|
release_mem_region(r->start, resource_size(r));
|
|
out_rel_clk:
|
|
clk_disable_unprepare(spi->clk);
|
|
clk_put(spi->clk);
|
|
out:
|
|
spi_master_put(master);
|
|
return status;
|
|
}
|
|
|
|
|
|
static int orion_spi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct resource *r;
|
|
struct orion_spi *spi;
|
|
|
|
master = dev_get_drvdata(&pdev->dev);
|
|
spi = spi_master_get_devdata(master);
|
|
|
|
clk_disable_unprepare(spi->clk);
|
|
clk_put(spi->clk);
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
release_mem_region(r->start, resource_size(r));
|
|
|
|
spi_unregister_master(master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|
|
|
|
static const struct of_device_id orion_spi_of_match_table[] = {
|
|
{ .compatible = "marvell,orion-spi", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, orion_spi_of_match_table);
|
|
|
|
static struct platform_driver orion_spi_driver = {
|
|
.driver = {
|
|
.name = DRIVER_NAME,
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_match_ptr(orion_spi_of_match_table),
|
|
},
|
|
.remove = orion_spi_remove,
|
|
};
|
|
|
|
static int __init orion_spi_init(void)
|
|
{
|
|
return platform_driver_probe(&orion_spi_driver, orion_spi_probe);
|
|
}
|
|
module_init(orion_spi_init);
|
|
|
|
static void __exit orion_spi_exit(void)
|
|
{
|
|
platform_driver_unregister(&orion_spi_driver);
|
|
}
|
|
module_exit(orion_spi_exit);
|
|
|
|
MODULE_DESCRIPTION("Orion SPI driver");
|
|
MODULE_AUTHOR("Shadi Ammouri <shadi@marvell.com>");
|
|
MODULE_LICENSE("GPL");
|