renegade-project/linux-next
2
0
Fork 0
mirror of https://github.com/edk2-porting/linux-next.git synced 2024-12-20 11:13:58 +08:00
Code
2dbb3ec29a
linux-next/drivers/ata
History
Srinivas Pandruvada 2dbb3ec29a ata: libahci: Correct setting of DEVSLP register 
We have seen that on some platforms, SATA device never show any DEVSLP
residency. This prevent power gating of SATA IP, which prevent system
to transition to low power mode in systems with SLP_S0 aka modern
standby systems. The PHY logic is off only in DEVSLP not in slumber.
Reference:
https://www.intel.com/content/dam/www/public/us/en/documents/datasheets
/332995-skylake-i-o-platform-datasheet-volume-1.pdf
Section 28.7.6.1

Here driver is trying to do read-modify-write the devslp register. But
not resetting the bits for which this driver will modify values (DITO,
MDAT and DETO). So simply reset those bits before updating to new values.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
2018-07-30 10:32:51 -07:00
..
acard-ahci.c libata: convert core and drivers to ->hw_tag usage 2018-05-11 13:10:43 -07:00
ahci_brcm.c ata: ahci_brcm: Recover from failures to identify devices 2018-01-17 07:52:29 -08:00
ahci_ceva.c ata: ceva: Add SMMU support for SATA IP 2017-10-23 07:09:27 -07:00
ahci_da850.c sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()' 2017-08-16 07:38:27 -07:00
ahci_dm816.c ata: ahci: add support for DaVinci DM816 SATA controller 2017-03-24 11:40:03 -04:00
ahci_imx.c ahci: imx: add the imx8qm ahci sata support 2018-03-29 06:43:55 -07:00
ahci_mtk.c ahci: mtk: Change driver name to ahci-mtk 2017-12-04 12:35:29 -08:00
ahci_mvebu.c ata: ahci: mvebu: override ahci_stop_engine for mvebu AHCI 2018-04-26 11:25:15 -07:00
ahci_octeon.c Delete redundant return value check of platform_get_resource() 2017-03-06 15:40:59 -05:00
ahci_platform.c ata: ahci_platform: allow disabling of hotplug to save power 2018-06-18 10:58:55 -07:00
ahci_qoriq.c libahci: Allow drivers to override stop_engine 2018-04-26 11:25:04 -07:00
ahci_seattle.c ata: fix return value check in ahci_seattle_get_port_info() 2016-06-15 14:26:41 -04:00
ahci_st.c ahci: st: Add ports-implemented property in support 2016-08-10 12:16:49 -04:00
ahci_sunxi.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_tegra.c ata: ahci_tegra: Add AHCI support for Tegra210 2018-03-14 08:24:21 -07:00
ahci_xgene.c libahci: Allow drivers to override stop_engine 2018-04-26 11:25:04 -07:00
ahci.c ata: ahci: Enable DEVSLP by default on x86 with SLP_S0 2018-07-30 07:09:28 -07:00
ahci.h Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2018-06-05 17:01:41 -07:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata_piix: constify pci_bits 2018-01-08 06:15:41 -08:00
Kconfig Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2018-04-03 17:42:25 -07:00
libahci_platform.c Revert "ata: ahci_platform: convert kcalloc to devm_kcalloc" 2018-07-24 09:44:24 -07:00
libahci.c ata: libahci: Correct setting of DEVSLP register 2018-07-30 10:32:51 -07:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c ata: ahci: Support state with min power but Partial low power state 2018-07-30 07:09:10 -07:00
libata-eh.c Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2018-06-05 17:01:41 -07:00
libata-pmp.c treewide: kzalloc() -> kcalloc() 2018-06-12 16:19:22 -07:00
libata-scsi.c ata: ahci: Support state with min power but Partial low power state 2018-07-30 07:09:10 -07:00
libata-sff.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
libata-trace.c libata: NCQ encapsulation for ZAC MANAGEMENT OUT 2016-05-09 12:36:46 -04:00
libata-transport.c libata: add refcounting to ata_host 2018-03-13 13:29:10 -07:00
libata-transport.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
libata-zpodd.c libata: zpodd: small read overflow in eject_tray() 2018-05-29 06:48:54 -07:00
libata.h libata: add refcounting to ata_host 2018-03-13 13:29:10 -07:00
Makefile Merge branch 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2018-04-03 17:42:25 -07:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: Deprecate pci_get_bus_and_slot() 2018-01-11 17:23:23 -06:00
pata_amd.c cs5536: add support for IDE controller variant 2017-08-11 10:35:07 -07:00
pata_arasan_cf.c pata_arasan_cf: Delete an unnecessary variable initialisation in arasan_cf_probe() 2018-02-18 05:16:35 -08:00
pata_artop.c ata: pata_artop: remove redundant initialization of pio 2017-09-18 20:24:21 -07:00
pata_atiixp.c libata:pata_atiixp: Don't use unconnected secondary port on SB600 2018-01-08 04:02:02 -08:00
pata_atp867x.c ata: mark expected switch fall-throughs 2017-10-23 07:06:09 -07:00
pata_bk3710.c pata_bk3710: clarify license version and use SPDX header 2018-03-01 13:59:03 -08:00
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_cs5520.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_cs5530.c ata: Delete unnecessary checks before the function call "pci_dev_put" 2015-02-03 07:04:44 -05:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c cs5536: add support for IDE controller variant 2017-08-11 10:35:07 -07:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c ata: ep93xx: cut drvdata assignment 2017-05-30 11:54:36 -04:00
pata_falcon.c pata_falcon: clarify license version and use SPDX header 2018-03-01 13:58:17 -08:00
pata_ftide010.c ata: ftide010: fix resource printing 2017-06-21 18:06:18 -04:00
pata_gayle.c ata: add Amiga Gayle PATA controller driver 2018-03-19 07:41:36 -07:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_hpt37x.c ata: hpt37x: Convert to use match_string() helper 2018-05-07 08:50:30 -07:00
pata_hpt366.c ata: hpt366: fix incorrect mask when checking at cmd_high_time 2016-07-12 11:02:05 -04:00
pata_icside.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_imx.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_isapnp.c PNP: ata/pata_isapnp: Use module_pnp_driver to register driver 2015-03-18 22:39:17 +01:00
pata_it821x.c pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command() 2018-02-18 05:26:07 -08:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c ata: pass queued command to ->sff_data_xfer method 2017-01-10 11:11:17 -05:00
pata_jmicron.c PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI 2015-08-24 15:27:11 -05:00
pata_legacy.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_macio.c pata_macio: Delete an error message for a failed memory allocation in two functions 2018-02-18 05:24:16 -08:00
pata_marvell.c ata: Use IS_ENABLED() instead of checking for built-in or module 2016-05-27 11:27:23 -04:00
pata_mpc52xx.c pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe() 2018-02-18 05:23:25 -08:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c pata_ninja32: Avoid corrupting status flags 2016-08-30 11:59:47 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c pata_octeon_cf: use of_property_read_{bool|u32}() 2017-08-28 10:44:24 -07:00
pata_of_platform.c ata: constify of_device_id structures 2017-03-06 15:18:01 -05:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_pcmcia.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: pata_pdc2027x: Replace mdelay with msleep 2018-01-25 07:28:31 -08:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pata_pxa.c ata: pata_pxa: dmaengine conversion 2015-09-10 17:02:04 -04:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c ata: rb532_cf: cut drvdata assignment 2017-05-30 11:54:37 -04:00
pata_rdc.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c pata_samsung_cf: Delete an error message for a failed memory allocation in pata_s3c_probe() 2018-02-18 05:20:38 -08:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sch.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c libata: remove ata_sff_data_xfer_noirq() 2018-07-11 10:45:28 -07:00
pdc_adma.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_dwc_460ex.c libata: convert core and drivers to ->hw_tag usage 2018-05-11 13:10:43 -07:00
sata_fsl.c sata_fsl: use the right type for tag bitshift 2018-05-14 08:14:21 -07:00
sata_gemini.c ata: sata_gemini: Introduce explicit IDE pin control 2017-08-11 10:32:09 -07:00
sata_gemini.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sata_highbank.c libahci: Allow drivers to override stop_engine 2018-04-26 11:25:04 -07:00
sata_inic162x.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
sata_mv.c treewide: devm_kzalloc() -> devm_kcalloc() 2018-06-12 16:19:22 -07:00
sata_nv.c sata_nv: set host can_queue count appropriately 2018-05-11 13:10:43 -07:00
sata_promise.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_promise.h ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_qstor.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_rcar.c ata: sata_rcar: Add rudimentary Runtime PM support 2018-07-23 08:18:43 -07:00
sata_sil24.c Merge branch 'for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2018-06-05 17:01:41 -07:00
sata_sil.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_sis.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_svw.c ata: Convert to using %pOF instead of full_name 2017-07-18 18:02:36 -04:00
sata_sx4.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_uli.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_via.c sata_via: Enable optional hotplug on VT6420 2017-06-26 16:54:53 -04:00
sata_vsc.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sis.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00