mirror of
https://github.com/edk2-porting/linux-next.git
synced 2024-12-22 20:23:57 +08:00
2d5eaa6dd7
Depends on the "ide: fix UDMA/MWDMA/SWDMA masks" patch. * add ide_hwif_t.udma_filter hook for filtering UDMA mask (use it in alim15x3, hpt366, siimage and serverworks drivers) * add ide_max_dma_mode() for finding best DMA mode for the device (loosely based on some older libata-core.c code) * convert ide_dma_speed() users to use ide_max_dma_mode() * make ide_rate_filter() take "ide_drive_t *drive" as an argument instead of "u8 mode" and teach it to how to use UDMA mask to do filtering * use ide_rate_filter() in hpt366 driver * remove no longer needed ide_dma_speed() and *_ratemask() * unexport eighty_ninty_three() v2: * rename ->filter_udma_mask to ->udma_filter [ Suggested by Sergei Shtylyov <sshtylyov@ru.mvista.com>. ] v3: * updated for scc_pata driver (fixes XFER_UDMA_6 filtering for user-space originated transfer mode change requests when 100MHz clock is used) Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
657 lines
19 KiB
C
657 lines
19 KiB
C
/*
|
|
* linux/drivers/ide/pci/pdc202xx_old.c Version 0.36 Sept 11, 2002
|
|
*
|
|
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
|
|
* Copyright (C) 2006-2007 MontaVista Software, Inc.
|
|
*
|
|
* Promise Ultra33 cards with BIOS v1.20 through 1.28 will need this
|
|
* compiled into the kernel if you have more than one card installed.
|
|
* Note that BIOS v1.29 is reported to fix the problem. Since this is
|
|
* safe chipset tuning, including this support is harmless
|
|
*
|
|
* Promise Ultra66 cards with BIOS v1.11 this
|
|
* compiled into the kernel if you have more than one card installed.
|
|
*
|
|
* Promise Ultra100 cards.
|
|
*
|
|
* The latest chipset code will support the following ::
|
|
* Three Ultra33 controllers and 12 drives.
|
|
* 8 are UDMA supported and 4 are limited to DMA mode 2 multi-word.
|
|
* The 8/4 ratio is a BIOS code limit by promise.
|
|
*
|
|
* UNLESS you enable "CONFIG_PDC202XX_BURST"
|
|
*
|
|
*/
|
|
|
|
/*
|
|
* Portions Copyright (C) 1999 Promise Technology, Inc.
|
|
* Author: Frank Tiernan (frankt@promise.com)
|
|
* Released under terms of General Public License
|
|
*/
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/hdreg.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ide.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
|
|
#define PDC202_DEBUG_CABLE 0
|
|
#define PDC202XX_DEBUG_DRIVE_INFO 0
|
|
|
|
static const char *pdc_quirk_drives[] = {
|
|
"QUANTUM FIREBALLlct08 08",
|
|
"QUANTUM FIREBALLP KA6.4",
|
|
"QUANTUM FIREBALLP KA9.1",
|
|
"QUANTUM FIREBALLP LM20.4",
|
|
"QUANTUM FIREBALLP KX13.6",
|
|
"QUANTUM FIREBALLP KX20.5",
|
|
"QUANTUM FIREBALLP KX27.3",
|
|
"QUANTUM FIREBALLP LM20.5",
|
|
NULL
|
|
};
|
|
|
|
/* A Register */
|
|
#define SYNC_ERRDY_EN 0xC0
|
|
|
|
#define SYNC_IN 0x80 /* control bit, different for master vs. slave drives */
|
|
#define ERRDY_EN 0x40 /* control bit, different for master vs. slave drives */
|
|
#define IORDY_EN 0x20 /* PIO: IOREADY */
|
|
#define PREFETCH_EN 0x10 /* PIO: PREFETCH */
|
|
|
|
#define PA3 0x08 /* PIO"A" timing */
|
|
#define PA2 0x04 /* PIO"A" timing */
|
|
#define PA1 0x02 /* PIO"A" timing */
|
|
#define PA0 0x01 /* PIO"A" timing */
|
|
|
|
/* B Register */
|
|
|
|
#define MB2 0x80 /* DMA"B" timing */
|
|
#define MB1 0x40 /* DMA"B" timing */
|
|
#define MB0 0x20 /* DMA"B" timing */
|
|
|
|
#define PB4 0x10 /* PIO_FORCE 1:0 */
|
|
|
|
#define PB3 0x08 /* PIO"B" timing */ /* PIO flow Control mode */
|
|
#define PB2 0x04 /* PIO"B" timing */ /* PIO 4 */
|
|
#define PB1 0x02 /* PIO"B" timing */ /* PIO 3 half */
|
|
#define PB0 0x01 /* PIO"B" timing */ /* PIO 3 other half */
|
|
|
|
/* C Register */
|
|
#define IORDYp_NO_SPEED 0x4F
|
|
#define SPEED_DIS 0x0F
|
|
|
|
#define DMARQp 0x80
|
|
#define IORDYp 0x40
|
|
#define DMAR_EN 0x20
|
|
#define DMAW_EN 0x10
|
|
|
|
#define MC3 0x08 /* DMA"C" timing */
|
|
#define MC2 0x04 /* DMA"C" timing */
|
|
#define MC1 0x02 /* DMA"C" timing */
|
|
#define MC0 0x01 /* DMA"C" timing */
|
|
|
|
static int pdc202xx_tune_chipset (ide_drive_t *drive, u8 xferspeed)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u8 drive_pci = 0x60 + (drive->dn << 2);
|
|
u8 speed = ide_rate_filter(drive, xferspeed);
|
|
|
|
u32 drive_conf;
|
|
u8 AP, BP, CP, DP;
|
|
u8 TA = 0, TB = 0, TC = 0;
|
|
|
|
if (drive->media != ide_disk &&
|
|
drive->media != ide_cdrom && speed < XFER_SW_DMA_0)
|
|
return -1;
|
|
|
|
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x03, &DP);
|
|
|
|
if (speed < XFER_SW_DMA_0) {
|
|
if ((AP & 0x0F) || (BP & 0x07)) {
|
|
/* clear PIO modes of lower 8421 bits of A Register */
|
|
pci_write_config_byte(dev, (drive_pci), AP &~0x0F);
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
|
|
/* clear PIO modes of lower 421 bits of B Register */
|
|
pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0x07);
|
|
pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
|
|
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
|
|
}
|
|
} else {
|
|
if ((BP & 0xF0) && (CP & 0x0F)) {
|
|
/* clear DMA modes of upper 842 bits of B Register */
|
|
/* clear PIO forced mode upper 1 bit of B Register */
|
|
pci_write_config_byte(dev, (drive_pci)|0x01, BP &~0xF0);
|
|
pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
|
|
|
|
/* clear DMA modes of lower 8421 bits of C Register */
|
|
pci_write_config_byte(dev, (drive_pci)|0x02, CP &~0x0F);
|
|
pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
|
|
}
|
|
}
|
|
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x01, &BP);
|
|
pci_read_config_byte(dev, (drive_pci)|0x02, &CP);
|
|
|
|
switch(speed) {
|
|
case XFER_UDMA_6: speed = XFER_UDMA_5;
|
|
case XFER_UDMA_5:
|
|
case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
|
|
case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
|
|
case XFER_UDMA_3:
|
|
case XFER_UDMA_1: TB = 0x40; TC = 0x02; break;
|
|
case XFER_UDMA_0:
|
|
case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
|
|
case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
|
|
case XFER_MW_DMA_0:
|
|
case XFER_SW_DMA_2: TB = 0x60; TC = 0x05; break;
|
|
case XFER_SW_DMA_1: TB = 0x80; TC = 0x06; break;
|
|
case XFER_SW_DMA_0: TB = 0xC0; TC = 0x0B; break;
|
|
case XFER_PIO_4: TA = 0x01; TB = 0x04; break;
|
|
case XFER_PIO_3: TA = 0x02; TB = 0x06; break;
|
|
case XFER_PIO_2: TA = 0x03; TB = 0x08; break;
|
|
case XFER_PIO_1: TA = 0x05; TB = 0x0C; break;
|
|
case XFER_PIO_0:
|
|
default: TA = 0x09; TB = 0x13; break;
|
|
}
|
|
|
|
if (speed < XFER_SW_DMA_0) {
|
|
pci_write_config_byte(dev, (drive_pci), AP|TA);
|
|
pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
|
|
} else {
|
|
pci_write_config_byte(dev, (drive_pci)|0x01, BP|TB);
|
|
pci_write_config_byte(dev, (drive_pci)|0x02, CP|TC);
|
|
}
|
|
|
|
#if PDC202XX_DEBUG_DRIVE_INFO
|
|
printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
|
|
drive->name, ide_xfer_verbose(speed),
|
|
drive->dn, drive_conf);
|
|
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
|
printk("0x%08x\n", drive_conf);
|
|
#endif /* PDC202XX_DEBUG_DRIVE_INFO */
|
|
|
|
return (ide_config_drive_speed(drive, speed));
|
|
}
|
|
|
|
|
|
static void pdc202xx_tune_drive(ide_drive_t *drive, u8 pio)
|
|
{
|
|
pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
|
|
pdc202xx_tune_chipset(drive, XFER_PIO_0 + pio);
|
|
}
|
|
|
|
static u8 pdc202xx_old_cable_detect (ide_hwif_t *hwif)
|
|
{
|
|
u16 CIS = 0, mask = (hwif->channel) ? (1<<11) : (1<<10);
|
|
pci_read_config_word(hwif->pci_dev, 0x50, &CIS);
|
|
return (CIS & mask) ? 1 : 0;
|
|
}
|
|
|
|
/*
|
|
* Set the control register to use the 66MHz system
|
|
* clock for UDMA 3/4/5 mode operation when necessary.
|
|
*
|
|
* It may also be possible to leave the 66MHz clock on
|
|
* and readjust the timing parameters.
|
|
*/
|
|
static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long clock_reg = hwif->dma_master + 0x11;
|
|
u8 clock = inb(clock_reg);
|
|
|
|
outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
|
|
}
|
|
|
|
static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
|
|
{
|
|
unsigned long clock_reg = hwif->dma_master + 0x11;
|
|
u8 clock = inb(clock_reg);
|
|
|
|
outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
|
|
}
|
|
|
|
static int config_chipset_for_dma (ide_drive_t *drive)
|
|
{
|
|
struct hd_driveid *id = drive->id;
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
u32 drive_conf = 0;
|
|
u8 drive_pci = 0x60 + (drive->dn << 2);
|
|
u8 test1 = 0, test2 = 0, speed = -1;
|
|
u8 AP = 0, cable = 0;
|
|
|
|
u8 ultra_66 = ((id->dma_ultra & 0x0010) ||
|
|
(id->dma_ultra & 0x0008)) ? 1 : 0;
|
|
|
|
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
|
|
cable = pdc202xx_old_cable_detect(hwif);
|
|
else
|
|
ultra_66 = 0;
|
|
|
|
if (ultra_66 && cable) {
|
|
printk(KERN_WARNING "Warning: %s channel requires an 80-pin cable for operation.\n", hwif->channel ? "Secondary":"Primary");
|
|
printk(KERN_WARNING "%s reduced to Ultra33 mode.\n", drive->name);
|
|
}
|
|
|
|
if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
|
|
pdc_old_disable_66MHz_clock(drive->hwif);
|
|
|
|
drive_pci = 0x60 + (drive->dn << 2);
|
|
pci_read_config_dword(dev, drive_pci, &drive_conf);
|
|
if ((drive_conf != 0x004ff304) && (drive_conf != 0x004ff3c4))
|
|
goto chipset_is_set;
|
|
|
|
pci_read_config_byte(dev, drive_pci, &test1);
|
|
if (!(test1 & SYNC_ERRDY_EN)) {
|
|
if (drive->select.b.unit & 0x01) {
|
|
pci_read_config_byte(dev, drive_pci - 4, &test2);
|
|
if ((test2 & SYNC_ERRDY_EN) &&
|
|
!(test1 & SYNC_ERRDY_EN)) {
|
|
pci_write_config_byte(dev, drive_pci,
|
|
test1|SYNC_ERRDY_EN);
|
|
}
|
|
} else {
|
|
pci_write_config_byte(dev, drive_pci,
|
|
test1|SYNC_ERRDY_EN);
|
|
}
|
|
}
|
|
|
|
chipset_is_set:
|
|
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
if (id->capability & 4) /* IORDY_EN */
|
|
pci_write_config_byte(dev, (drive_pci), AP|IORDY_EN);
|
|
pci_read_config_byte(dev, (drive_pci), &AP);
|
|
if (drive->media == ide_disk) /* PREFETCH_EN */
|
|
pci_write_config_byte(dev, (drive_pci), AP|PREFETCH_EN);
|
|
|
|
speed = ide_max_dma_mode(drive);
|
|
|
|
if (!(speed)) {
|
|
/* restore original pci-config space */
|
|
pci_write_config_dword(dev, drive_pci, drive_conf);
|
|
return 0;
|
|
}
|
|
|
|
(void) hwif->speedproc(drive, speed);
|
|
return ide_dma_enable(drive);
|
|
}
|
|
|
|
static int pdc202xx_config_drive_xfer_rate (ide_drive_t *drive)
|
|
{
|
|
drive->init_speed = 0;
|
|
|
|
if (ide_use_dma(drive) && config_chipset_for_dma(drive))
|
|
return 0;
|
|
|
|
if (ide_use_fast_pio(drive))
|
|
pdc202xx_tune_drive(drive, 255);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static int pdc202xx_quirkproc (ide_drive_t *drive)
|
|
{
|
|
const char **list, *model = drive->id->model;
|
|
|
|
for (list = pdc_quirk_drives; *list != NULL; list++)
|
|
if (strstr(model, *list) != NULL)
|
|
return 2;
|
|
return 0;
|
|
}
|
|
|
|
static void pdc202xx_old_ide_dma_start(ide_drive_t *drive)
|
|
{
|
|
if (drive->current_speed > XFER_UDMA_2)
|
|
pdc_old_enable_66MHz_clock(drive->hwif);
|
|
if (drive->media != ide_disk || drive->addressing == 1) {
|
|
struct request *rq = HWGROUP(drive)->rq;
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->dma_master;
|
|
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
|
|
u32 word_count = 0;
|
|
u8 clock = inb(high_16 + 0x11);
|
|
|
|
outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
|
|
word_count = (rq->nr_sectors << 8);
|
|
word_count = (rq_data_dir(rq) == READ) ?
|
|
word_count | 0x05000000 :
|
|
word_count | 0x06000000;
|
|
outl(word_count, atapi_reg);
|
|
}
|
|
ide_dma_start(drive);
|
|
}
|
|
|
|
static int pdc202xx_old_ide_dma_end(ide_drive_t *drive)
|
|
{
|
|
if (drive->media != ide_disk || drive->addressing == 1) {
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->dma_master;
|
|
unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
|
|
u8 clock = 0;
|
|
|
|
outl(0, atapi_reg); /* zero out extra */
|
|
clock = inb(high_16 + 0x11);
|
|
outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
|
|
}
|
|
if (drive->current_speed > XFER_UDMA_2)
|
|
pdc_old_disable_66MHz_clock(drive->hwif);
|
|
return __ide_dma_end(drive);
|
|
}
|
|
|
|
static int pdc202xx_old_ide_dma_test_irq(ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
unsigned long high_16 = hwif->dma_master;
|
|
u8 dma_stat = inb(hwif->dma_status);
|
|
u8 sc1d = inb(high_16 + 0x001d);
|
|
|
|
if (hwif->channel) {
|
|
/* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
|
|
if ((sc1d & 0x50) == 0x50)
|
|
goto somebody_else;
|
|
else if ((sc1d & 0x40) == 0x40)
|
|
return (dma_stat & 4) == 4;
|
|
} else {
|
|
/* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
|
|
if ((sc1d & 0x05) == 0x05)
|
|
goto somebody_else;
|
|
else if ((sc1d & 0x04) == 0x04)
|
|
return (dma_stat & 4) == 4;
|
|
}
|
|
somebody_else:
|
|
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
|
|
}
|
|
|
|
static int pdc202xx_ide_dma_lostirq(ide_drive_t *drive)
|
|
{
|
|
if (HWIF(drive)->resetproc != NULL)
|
|
HWIF(drive)->resetproc(drive);
|
|
return __ide_dma_lostirq(drive);
|
|
}
|
|
|
|
static int pdc202xx_ide_dma_timeout(ide_drive_t *drive)
|
|
{
|
|
if (HWIF(drive)->resetproc != NULL)
|
|
HWIF(drive)->resetproc(drive);
|
|
return __ide_dma_timeout(drive);
|
|
}
|
|
|
|
static void pdc202xx_reset_host (ide_hwif_t *hwif)
|
|
{
|
|
unsigned long high_16 = hwif->dma_master;
|
|
u8 udma_speed_flag = inb(high_16 | 0x001f);
|
|
|
|
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
|
|
mdelay(100);
|
|
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
|
|
mdelay(2000); /* 2 seconds ?! */
|
|
|
|
printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
|
|
hwif->channel ? "Secondary" : "Primary");
|
|
}
|
|
|
|
static void pdc202xx_reset (ide_drive_t *drive)
|
|
{
|
|
ide_hwif_t *hwif = HWIF(drive);
|
|
ide_hwif_t *mate = hwif->mate;
|
|
|
|
pdc202xx_reset_host(hwif);
|
|
pdc202xx_reset_host(mate);
|
|
pdc202xx_tune_drive(drive, 255);
|
|
}
|
|
|
|
static unsigned int __devinit init_chipset_pdc202xx(struct pci_dev *dev,
|
|
const char *name)
|
|
{
|
|
/* This doesn't appear needed */
|
|
if (dev->resource[PCI_ROM_RESOURCE].start) {
|
|
pci_write_config_dword(dev, PCI_ROM_ADDRESS,
|
|
dev->resource[PCI_ROM_RESOURCE].start | PCI_ROM_ADDRESS_ENABLE);
|
|
printk(KERN_INFO "%s: ROM enabled at 0x%08lx\n", name,
|
|
(unsigned long)dev->resource[PCI_ROM_RESOURCE].start);
|
|
}
|
|
|
|
return dev->irq;
|
|
}
|
|
|
|
static void __devinit init_hwif_pdc202xx(ide_hwif_t *hwif)
|
|
{
|
|
struct pci_dev *dev = hwif->pci_dev;
|
|
|
|
/* PDC20265 has problems with large LBA48 requests */
|
|
if ((dev->device == PCI_DEVICE_ID_PROMISE_20267) ||
|
|
(dev->device == PCI_DEVICE_ID_PROMISE_20265))
|
|
hwif->rqsize = 256;
|
|
|
|
hwif->autodma = 0;
|
|
hwif->tuneproc = &pdc202xx_tune_drive;
|
|
hwif->quirkproc = &pdc202xx_quirkproc;
|
|
|
|
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246)
|
|
hwif->resetproc = &pdc202xx_reset;
|
|
|
|
hwif->speedproc = &pdc202xx_tune_chipset;
|
|
|
|
hwif->drives[0].autotune = hwif->drives[1].autotune = 1;
|
|
|
|
hwif->ultra_mask = hwif->cds->udma_mask;
|
|
hwif->mwdma_mask = 0x07;
|
|
hwif->swdma_mask = 0x07;
|
|
hwif->atapi_dma = 1;
|
|
|
|
hwif->err_stops_fifo = 1;
|
|
|
|
hwif->ide_dma_check = &pdc202xx_config_drive_xfer_rate;
|
|
hwif->ide_dma_lostirq = &pdc202xx_ide_dma_lostirq;
|
|
hwif->ide_dma_timeout = &pdc202xx_ide_dma_timeout;
|
|
|
|
if (hwif->pci_dev->device != PCI_DEVICE_ID_PROMISE_20246) {
|
|
if (!(hwif->udma_four))
|
|
hwif->udma_four = (pdc202xx_old_cable_detect(hwif)) ? 0 : 1;
|
|
hwif->dma_start = &pdc202xx_old_ide_dma_start;
|
|
hwif->ide_dma_end = &pdc202xx_old_ide_dma_end;
|
|
}
|
|
hwif->ide_dma_test_irq = &pdc202xx_old_ide_dma_test_irq;
|
|
|
|
if (!noautodma)
|
|
hwif->autodma = 1;
|
|
hwif->drives[0].autodma = hwif->drives[1].autodma = hwif->autodma;
|
|
#if PDC202_DEBUG_CABLE
|
|
printk(KERN_DEBUG "%s: %s-pin cable\n",
|
|
hwif->name, hwif->udma_four ? "80" : "40");
|
|
#endif /* PDC202_DEBUG_CABLE */
|
|
}
|
|
|
|
static void __devinit init_dma_pdc202xx(ide_hwif_t *hwif, unsigned long dmabase)
|
|
{
|
|
u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
|
|
|
|
if (hwif->channel) {
|
|
ide_setup_dma(hwif, dmabase, 8);
|
|
return;
|
|
}
|
|
|
|
udma_speed_flag = inb(dmabase | 0x1f);
|
|
primary_mode = inb(dmabase | 0x1a);
|
|
secondary_mode = inb(dmabase | 0x1b);
|
|
printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
|
|
"Primary %s Mode " \
|
|
"Secondary %s Mode.\n", hwif->cds->name,
|
|
(udma_speed_flag & 1) ? "EN" : "DIS",
|
|
(primary_mode & 1) ? "MASTER" : "PCI",
|
|
(secondary_mode & 1) ? "MASTER" : "PCI" );
|
|
|
|
#ifdef CONFIG_PDC202XX_BURST
|
|
if (!(udma_speed_flag & 1)) {
|
|
printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
|
|
hwif->cds->name, udma_speed_flag,
|
|
(udma_speed_flag|1));
|
|
outb(udma_speed_flag | 1, dmabase | 0x1f);
|
|
printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
|
|
}
|
|
#endif /* CONFIG_PDC202XX_BURST */
|
|
|
|
ide_setup_dma(hwif, dmabase, 8);
|
|
}
|
|
|
|
static int __devinit init_setup_pdc202ata4(struct pci_dev *dev,
|
|
ide_pci_device_t *d)
|
|
{
|
|
if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
|
|
u8 irq = 0, irq2 = 0;
|
|
pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
|
|
/* 0xbc */
|
|
pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2);
|
|
if (irq != irq2) {
|
|
pci_write_config_byte(dev,
|
|
(PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
|
|
printk(KERN_INFO "%s: pci-config space interrupt "
|
|
"mirror fixed.\n", d->name);
|
|
}
|
|
}
|
|
return ide_setup_pci_device(dev, d);
|
|
}
|
|
|
|
static int __devinit init_setup_pdc20265(struct pci_dev *dev,
|
|
ide_pci_device_t *d)
|
|
{
|
|
if ((dev->bus->self) &&
|
|
(dev->bus->self->vendor == PCI_VENDOR_ID_INTEL) &&
|
|
((dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960) ||
|
|
(dev->bus->self->device == PCI_DEVICE_ID_INTEL_I960RM))) {
|
|
printk(KERN_INFO "ide: Skipping Promise PDC20265 "
|
|
"attached to I2O RAID controller.\n");
|
|
return -ENODEV;
|
|
}
|
|
return ide_setup_pci_device(dev, d);
|
|
}
|
|
|
|
static int __devinit init_setup_pdc202xx(struct pci_dev *dev,
|
|
ide_pci_device_t *d)
|
|
{
|
|
return ide_setup_pci_device(dev, d);
|
|
}
|
|
|
|
static ide_pci_device_t pdc202xx_chipsets[] __devinitdata = {
|
|
{ /* 0 */
|
|
.name = "PDC20246",
|
|
.init_setup = init_setup_pdc202ata4,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.init_hwif = init_hwif_pdc202xx,
|
|
.init_dma = init_dma_pdc202xx,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = OFF_BOARD,
|
|
.extra = 16,
|
|
.udma_mask = 0x07, /* udma0-2 */
|
|
},{ /* 1 */
|
|
.name = "PDC20262",
|
|
.init_setup = init_setup_pdc202ata4,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.init_hwif = init_hwif_pdc202xx,
|
|
.init_dma = init_dma_pdc202xx,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = OFF_BOARD,
|
|
.extra = 48,
|
|
.udma_mask = 0x1f, /* udma0-4 */
|
|
},{ /* 2 */
|
|
.name = "PDC20263",
|
|
.init_setup = init_setup_pdc202ata4,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.init_hwif = init_hwif_pdc202xx,
|
|
.init_dma = init_dma_pdc202xx,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = OFF_BOARD,
|
|
.extra = 48,
|
|
.udma_mask = 0x1f, /* udma0-4 */
|
|
},{ /* 3 */
|
|
.name = "PDC20265",
|
|
.init_setup = init_setup_pdc20265,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.init_hwif = init_hwif_pdc202xx,
|
|
.init_dma = init_dma_pdc202xx,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = OFF_BOARD,
|
|
.extra = 48,
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
},{ /* 4 */
|
|
.name = "PDC20267",
|
|
.init_setup = init_setup_pdc202xx,
|
|
.init_chipset = init_chipset_pdc202xx,
|
|
.init_hwif = init_hwif_pdc202xx,
|
|
.init_dma = init_dma_pdc202xx,
|
|
.channels = 2,
|
|
.autodma = AUTODMA,
|
|
.bootable = OFF_BOARD,
|
|
.extra = 48,
|
|
.udma_mask = 0x3f, /* udma0-5 */
|
|
}
|
|
};
|
|
|
|
/**
|
|
* pdc202xx_init_one - called when a PDC202xx is found
|
|
* @dev: the pdc202xx device
|
|
* @id: the matching pci id
|
|
*
|
|
* Called when the PCI registration layer (or the IDE initialization)
|
|
* finds a device matching our IDE device tables.
|
|
*/
|
|
|
|
static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
|
|
{
|
|
ide_pci_device_t *d = &pdc202xx_chipsets[id->driver_data];
|
|
|
|
return d->init_setup(dev, d);
|
|
}
|
|
|
|
static struct pci_device_id pdc202xx_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20246, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
|
|
{ PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20262, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
|
|
{ PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20263, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2},
|
|
{ PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20265, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3},
|
|
{ PCI_VENDOR_ID_PROMISE, PCI_DEVICE_ID_PROMISE_20267, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4},
|
|
{ 0, },
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
|
|
|
|
static struct pci_driver driver = {
|
|
.name = "Promise_Old_IDE",
|
|
.id_table = pdc202xx_pci_tbl,
|
|
.probe = pdc202xx_init_one,
|
|
};
|
|
|
|
static int __init pdc202xx_ide_init(void)
|
|
{
|
|
return ide_pci_register_driver(&driver);
|
|
}
|
|
|
|
module_init(pdc202xx_ide_init);
|
|
|
|
MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
|
|
MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
|
|
MODULE_LICENSE("GPL");
|